User Manualeufy Security SpaceView Baby MonitorAnker Innovations Limited. All rights reserved. Eufy and the Eufy logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.51005001157 V01 Tabel of Content Whats in the Box Feature Introduction Setting Up the Camera and Monitor Monitor Installation Replacing the Camera lens Safety Customer service 01 02 03 03 06 07 10 Whats in the Box Baby Monitor
(T8300-C) Baby Camera
(T8300-M) Camera Stand Monitor Micro-USB Power Cable (1.5 m) Camera Micro-USB Power Cable (3 m) Camera Adapter
(5V 2A) Feature Introduction Monitor Features:
1 2 3 4 7 8 9 10 5 6 Volume controls Screen 1 2 3 Power button 4 Menu button 5 Navigation buttons 6 Return to previous level of menu / Talk button 11 12 13 Support stand 8 microSD card slot 9 10 Micro USB charging port LED indicator 11 12 Microphone 13 Speaker Monitor Adapter
(5V 2A) Screw Kit Wide-Angle Lens User manual Power adapter varies by region. 01 7 Monitor Antenna Press and hold the Talk button to speak to the camera. When Menu is opened, press Talk button once to return to previous level of menu. Press Power button to switch on / off the monitor screen. Press and hold the Power button for 2 seconds to switch on / off the monitor. 02 Camera Features:
charge it. Press and hold the power button for 2 seconds to turn the baby monitor on. 1 2 3 4 5 6 Standard camera lens 1 2 Microphone 3 Power LED Status indicator Speaker 4 5 Micro USB port Pairing button 6 Setting Up the Camera and Monitor Monitor Installation Fully charge the monitor before use. To charge:
Connect the baby monitor to the monitor adapter with the Micro USB cable, and then connect the adapter to a power outlet. Connect the other end of the baby monitors Micro USB power cable to the Micro USB port in the monitor to 03 Camera Installation Connect the baby cameras Micro USB power cable to the camera adapter (5V 2A), and then connect the adapter to a power outlet. Finally, connect the other end of the baby cameras micro USB power cable to the micro USB port in the camera. Camera Placement (on the Wall Mount) 1. Use the monitor to test the viewing angle from your desired mounting spot. 2. Mark the screw holes with a pencil. 3. Drill 1/5 holes into the wall and then insert the anchors into the holes. Insert the screws through the mounting holes of the base and screw into the anchors. 4. 5. Place the camera on the base. 04 On-screen Menu Icons Icon Icon Description Wireless signal strength Night Vision Mode is enabled Shows the camera that is currently presenting on the baby monitor screen Cycle Cameras enabled Temperature Alert enabled / Sound Alert enabled Ambient temperature of the room the camera is in Sound level of the room the camera is in 1 27C 17: 30 Current time Current battery level of the baby monitor 05 Replacing the Camera lens Lens type Standard camera lens (default lens) Wide-angle lens Usage This lens is recommended for general viewing;
infants are clearly seen within a 2~3m range. The lens angle of view for standard camera lens is 62. This lens provides a wide-angle view of the room. The lens angle of view for wide-angle lens is 110. Demonstration Back Front The standard camera lens is not removable. When you want to use the wide-angle lens, simply place it over the standard camera lens and fasten. 06 Safety Warning Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This product can be used across EU member states. The product shall only be connected to a USB Interface of version 2.0 or higher. 1. The adapter shall be installed near the equipment and shall be easily accessible. 2. Do not use the product in the environment at too high or too low temperature, never expose the mobile phone under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20C-60C. When charging, please place the product in an environment that has a normal room temperature and good ventilation. It is recommended to charge the product in an environment 07 with a temperature that ranges from -10C~45C. Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article. 3. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 4. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. 6. Operating Frequency Range: 2410-2477MHz 7. The charger output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter. 8. If you use a third-party charger, the recommended output voltage/current of the adaptor is 5Vdc/2A,and the adapter shall be CE approval type. 9. The following importer is the responsible party (contact for EU matters only) Importer:Anker Technology (UK) Ltd Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham,United Kingdom B11 2AA 08 This product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. The following importer is the responsible party (contact for FCC matters only) Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541 Telephone:(206)383-8247 09 10 Customer service Warranty 12-month limited warranty Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Email Us Customer Support: support@eufylife.com FCC Radio Frequency Exposure Statement The T3800-C device has been evaluated to meet general RF exposure requirements. The T3800-C can be used in fixed exposure condition. The min separation distance is 20cm. This T3800-M was tested for typical bodyworn operations with the back of the handset kept 0 mm from the body. RF Exposure Information(SAR) The Extremity SAR limit of FCC for Hand held is 4.0W/kg. Device is recommended to use in hand held only and SAR when hand held is 1.804W/kg Worn on body will have unexpected RF exposure RISK. 11 12