Anker Innovations Limited. All rights reserved. eufy and the eufy Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. QUICK START GUIDE EUFYCARE BABY SMART SOCK KIT Table of Contents SAFETY INSTRUCTIONS HOW THE PRODUCT WORKS STEP 1. POWER ON SOCK BASE STEP 2. ADD SOCK BASE TO EUFYCARE APP STEP 3. WRAPPING YOUR BABYS FOOT WITH THE SOCK CHECK ALARMS BY RING LIGHT NOTICE 01 01 02 03 04 06 07 SAFETY INSTRUCTIONS Strangulation Hazard: Children get STRANGLED in cords. Keep cords out of the reach of children (more than 1m / 3ft away). Never use extension cords with AC adapters. Only use the AC adapters provided. eufyCare Baby Smart Sock is not a medical device and is not intended for diagnosis prevention, or treatment of any disease or condition. PRODUCT OVERVIEW Baby Sock Base Baby movement indicator System indicator Heart rate and blood oxygen level indicator Sock fall-off indicator Magnetic charging pin Bluetooth indicator Sock battery indicator SYNC Power port Alarm ON/OFF Ring light Snooze Description Press and hold for 2 seconds for setup. OFF: You will not get any alarms or notifications. The system indicator turns white. ON: You will get alarms and notifications in case of emergency. Pat sock base to snooze alarms for 10 minutes. Button SYNC Alarm ON/OFF Snooze Baby Smart Sock Sensor status indicator Sock sensor Sock HOW THE PRODUCT WORKS The product provides real-time monitoring of heart rate and blood oxygen level via the smart sock worn on the baby's foot. In case of emergency, the Baby Sock Base plays sound and light alarms, and sends notifications to your phone through the eufyCare app. STEP 1. POWER ON SOCK BASE 1. Power on the sock base. Wait for a few seconds until the ring light on the bottom turns green. 01 English 2. Charge the sock. The sock battery indicator on the sock base turns red. STEP 2. ADD SOCK BASE TO EUFYCARE APP 1. Download the eufyCare app from App Store or Google Play. English 02 2. Scan the QR code on the bottom of the Sock Base, and follow the in-app instructions to add the Sock Base and Smart Sock. SOCK SENSOR STATUS INDICATOR Flashing red Red Green Charging and waiting to connect Charging and connected Fully charged and connected STEP 3. WEAR SOCK FOR BABY Wear the sock on either foot of the baby. 03 English Scan QR CodeScan the QR code on the device.Select Device Manually9:4 19:4 1eufyCareAdd Device The eufy logo facing outwards Straight edge TIPS:
Make sure the sock is worn directly next to the skin. Do not wear the sock too tightly or loosely. To charge the sock, put it back to the sock base, and make sure the sock battery indicator on the sock base turns red. Wash the sock (except the sensor) regularly. English 04 The product provides two socks in different sizes. The small one fits babies weighing 4-12lb, and the big one fits babies weighing 12-30lb. You can remove the sensor from one sock, and install it on the other. Charging pins facing to the straight edge. 05 English CHECK ALARMS BY RING LIGHT Green Flashing red Normal. Warning: The heart rate and/or blood oxygen level are outside the normal range. English 06 NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help. FCC Radio Frequency Exposure Statement T8340 has been evaluated and following general RF exposure requirement. The device can be used in portable exposure condition without restriction. The min separation distance is 0cm. T8351 has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
07 English Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement T8340 has been evaluated and following general RF exposure requirement. The device can be used in portable exposure condition without restriction. The min separation distance is 0cm. Le T8340 a t valu et conforme aux exigences gnrales d'exposition aux RF. L'appareil peut tre utilis dans des conditions d'exposition portable sans restriction. La distance de sparation minimale est de 0 cm. When using T8351, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du T8351, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. English 08 CUSTOMER SERVICE Warranty 12-month limited warranty Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Email Us Customer Support: support@eufylife.com
@EufyOfficial
@EufyOfficial
@EufyOfficial 09 English English 10