FCC ID: 2AOKB-T8453 Garage-Control Cam Plus

QUICK START GUIDE Garage-Control Cam with Sensor Garage-Control Cam Plus with Sensor Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005003163 V01 OVERVIEW 1 Camera Lens Infrared LED Speaker Ring Light Flashing blue: Connecting to the Internet. Blue: Working properly. Flashing red: Disconnected from the Internet. Microphone SYNC Button Wire Connectors: Model T8453 includes 2 pairs. Power Port MicroSD Card Slot Garage-Control Cam Plus / Garage-Control Cam Model: T8453 / T8452 1 Garage Door Sensor Model: T8450 Status LED Flashing blue: Pairing with the camera. OFF: Working properly / Powered off. SYNC Button Battery Cover 2 SETTING UP CAMERA 2 To use local storage, insert a memory card into the microSD card slot before powering the camera

(Model T8453 includes one). 1. Connect the camera to a power outlet. 2. Download and install the eufy Security app, then sign up for an account. USB-C 3. Follow on-screen instructions to add the camera to your device list. 3 4 MOUNTING CAMERA 3 1. Mount the camera underneath the garage door opener or to the ceiling. Option 1. Garage Door Opener Magnetically attach the camera underneath the garage door opener with a metal surface or onto the metal track. For garage door openers with a non-metal surface, stick the mounting plate underneath the garage door opener with the 3M sticker provided, then magnetically attach the camera to the mounting plate. 5 6 Option 2. Ceiling Fix the mounting iron plate to the ceiling with the provided screw, then magnetically attach the camera to the mounting plate. For model T8453, mount the camera to the ceiling in the middle of the two garage door openers so that you can see both garage doors through the camera. 2. Manually adjust the camera angle until you get the desired view through the eufy Security app. 7 8 WIRING CAMERA 4 1. Press and hold the orange tabs, then insert one end of the provided motor connection wire into the connectors. Each strand can connect to any connector. Make sure the paired strands are properly connected to their original terminal. If you haven't installed wall control, check your garage door opener's user manual for wall control wiring instructions to locate the right terminals. Model T8453 can wire up to 2 garage doors. Follow the steps above to wire the camera to the other garage door opener. 2. On the garage door opener, locate the terminals that wire to the wall control. Twist each wire strand to the motor connection wire, then connect the paired strands back to their original terminal. Garage Door Opener Garage Door Opener Wall Control Wire Motor Connection Wire 9 10 5 PAIRING AND MOUNTING SENSOR 1. Open the battery cover, then install the provided battery. 3. Select a location on your garage door to mount the sensor. Roller Door Mount the sensor at the end of the drum wheel spoke.

CR2450 11 Status LED New Battery's Status Blue for 2 seconds Normal Red for 2 seconds Low battery 2. In the eufy Security app, follow on-screen instructions to pair the sensor with the camera. Sectional Door Mount the sensor on the top of the door (the gray area in the figure below). 12 Tilt Door Mount the sensor on the top of the door (the gray area in the figure below). For wood doors, you can also mount the sensor with the screws provided. Make sure the SYNC button faces the same direction as the arrow on the battery cover. 5. In the eufy Security app, follow on-screen instructions to open the door for a test. 4. Mount the seneor. Mount the sensor with the provided 3M sticker. 13 Model T8453 can work with up to 2 garage doors. Buy another sensor for the other garage door, then follow the steps above to pair and mount the sensor. 14 APPENDIX. REPLACING BATTERY FOR SENOR 6 1. Pull the sensor off the battery cover. 2. Remove the battery using the provided detaching pin. Press the battery with your finger when detaching to keep the battery from popping out. To show the door status (open/closed) correctly in the eufy Security app, perform a calibration on Camera Settings > Door Settings > Calibration after you replace the battery or move the sensor. 15 NOTICE 7 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS AT T E N T I O N R I S Q U E D ' E X P LO S I O N S I L A BATTERIE EST REMPLACE PAR UN TYPE INCORRECT. LIMINER LES BATTERIES USES SELON LES INSTRUCTIONS Warning:

replacement of a battery with an incorrect type that can defeat a safeguard;

disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Attention:

remplacement dune batterie par un type incorrect pouvant supprimer une protection mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion;

maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables;

16 interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone: 1-800-988-7973 et batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables. NOTICE (United States Of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 17 18 NOTICE (Canada) IC Statement This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device."

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1. l'appareil nedoit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. CUSTOMER SERVICE Warranty 12-month limited warranty Call Us United States

+1 (800) 988 7973 Mon-Fri 6:15-17:00(PT) Sat-Sun 6:30-16:30(PT) United Kingdom

+44 (0) 1604 936 200 Mon-Fri 6:00-17:00 Sat-Sun 6:00-14:00 Germany

+49 (0) 69 9579 7960 Mon-Fri 8:00-16:00 Email Us support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial 19 20

Anker Innovations Limited Declaration concerning Antenna Specification It is hereby declared that the product Model No.: T8453 FCC ID : 2AOKB-T8453 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

BLE&WiFi 2.4G:

Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Shrapnel antenna 1.9 dBi WIFI 2.4G: 2412-2462MHz MHz BLE: 2402-2480MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

City:

ZIP / Postal code:

Country:

Place:

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Hongkong

Hong Kong Kowloon Date: 1/20/2022 Signature:

version01