FCC ID: 2AOKB-D2425 Nebula Capsule 3 with WiFi and Bluetooth

Anker Innovations Limited To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/10/27 Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Anker Innovations Limited (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Anker Innovations Limited (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification: Nebula Capsule 3 FCC ID: 2AOKB -D2425 If you have any questions, please feel free to contact me Contact Person:

Position in the Company: Compliance Manager Date of Signature:

Louis Qi 2023/10/27 ___________________________ Signatory

(signature of the applicant)

Agent letter FCC attestation statement Anker Innovations Limited RF_753, Issue 1 Page 1 of 2 Anker Innovations Limited U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company name:

FRN Contact person name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature:

Date:

Fantasia Trading LLC 0033423005 Louis Qi 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 91764/ Ontario/CA

+1 (800)988 7973 louis.qi@anker-in.com 2023/05/22 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name:

Grantee Code:

FCC ID:

Anker Innovations Limited 2AOKB 2AOKB-D2425 Agent letter FCC attestation statement Anker Innovations Limited RF_753, Issue 1 Page 2 of 2 Contact person name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature:

Date:

Anker Innovations Limited Louis Qi Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok Kowloon

+86-755-86544807 Louis.qi@anker.com 2023/05/22

Anker Innovations Limited Date: 2023/10/27 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AOKB-D2425 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days from grant date as outlined in Public Notice DA04-1705. This provision will give Anker Innovations Limited temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

Item PERMANENT SHORT-TERM PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Description Block Diagram Operational Description Schematics BOM External Photos Internal Photos Test-Setup Photos User Manual Exhibit 1 2 3 4 5 6 7 8 The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory Contact name: Louis Qi Tel: +86-755-86544807 Email: Louis.qi@anker.com Company name: Anker Innovations Limited

Anker Innovations Limited UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AOKB-D2425, IC: 23451-D2425.

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz 5510 5670 MHz Active Scanning

(the device can transmit a probe

(beacon)) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Signatory Contact name: Louis Qi Tel: +86-755-86544807 Email: Louis.qi@anker.com Company name: Anker Innovations Limited

Anker Innovations Limited Date:2023/10/27 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Anker Innovations Limited, the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Anker Innovations Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID:

2AOKB-D2425 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Anker Innovations Limited in connection with the Application shall have the same effect as acts of the Anker Innovations Limited. Anker Innovations Limited also hereby certify including FCC that no party to this application is subject to a denial of benefits, benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name: Louis Qi Tel: +86-755-86544807 Email: Louis.qi@anker.com Company name: Anker Innovations Limited