For FAQs and more information, please visit:
https://www.anker.com/support Model: A2579 51005002430 V03 English Deutsch Espaol Franais Italiano Portugus P Trk 01 05 07 09 11 15 17 18 19 21 22 24 26 27 English LED Indicator Status Solid blue for 3 seconds, then off Connected to power Solid blue Flashing blue Flashing green Charging mobile device Metal or abnormal objects detected Overvoltage protection, indicating you need to switch to a QC/PD adapter You cannot charge your device wirelessly in these scenarios:
T O using a case with a magnetic/iron plate;
O using a case with a pop socket;
O using an ultra-thick (> 5 mm) protective phone case. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating. Wireless chargers make charging more convenient than wired chargers, but conned by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25C / 77F. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be. For the safest and fastest charge, use original or certied cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open ame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio
/ TV technician for help. Important Safety Instructions Radiation Exposure Statement Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. 01 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model: A2579 02 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3-5, 80807 Munich, Germany IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-Gen Issue 5 March 2019 IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body. IC RF dclaration d'exposition:
Este equipo cumple con los Iimites de exposici6n a radacion por radiofrecuencia de la IC estipulados para un ambiente no controlado. Este equipo debera instalarse y utilizarse con una distancia minima de 10 cm entre el radiador y el cuerpo. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2579 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
03 https://www.anker.com/
GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2579 is in compliance with Radio Equipment Regulations 2017.&The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user's body and the product. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the product. Specications Input Output USB-A Output Radiated H-Field 12V 2.5A / 15V 2A 10W Max+5W Max 5V 1A Wireless Stand Output: 11.6 dBuA/m@10m Wirelss Pad Output: 6.9 dBuA/m@10m TX/RX Frequency Range 110 kHz~148 kHz (EU / UK only) Indoor use only. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. 04 Deutsch LED-Anzeige Status Leuchtet 3 Sekunden lang blau, dann aus An Stromversorgung angeschlossen Leuchtet blau Blinkt blau Blinkt grn Gert ldt Metall- oder abnormale Gegenstnde erkannt berspannungsschutz, zeigt an, dass Sie auf einen QC/PD-Adapter wechseln mssen T Sie knnen Ihr Gert in den Folgenden Situationen nicht kabellos laden:
O Wenn Sie eine Hlle mit einer magnetischen/Eisenplatte verwenden;
O Wenn Sie eine Hlle mit einem Popsocket verwenden;
O Wenn Sie eine ultradicke (> 5 mm) Schutzhlle verwenden. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Trschlssel, Mnzen, Metall oder NFC-Karten, da dies dazu fhren kann, dass das kabellose Auaden fehlschlgt oder das Gert berhitzt. Kabellose Ladegerte machen das Auaden praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen reduzieren die Ladegeschwindigkeit und schrnken die Leistung ein. Dies ist unter kabellosen Ladegerten ein weit verbreitetes Phnomen. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 25 C laden. Die Schutzhlle und die Position Ihres Gertes auf dem kabellosen Ladegert beeinusst die Ladegeschwindigkeit. Je weiter es von der Mitte des kabellosen Ladegerts entfernt platziert ist, desto langsamer ist die Ladegeschwindigkeit. Wichtige Sicherheitsinformationen Bitte lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder Bedienen. Nicht fallenlassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Zum sichersten und schnellsten Laden nur Original- oder zertizierte Kabel verwenden. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Technische Daten Eingang Ausgang 12V 2.5A / 15V 2A 10 W Max+5 W Max USB-A-Ausgang 5V 1A Abgestrahltes H-Feld Drahtloser Stnder-Ausgang: 11.6 dBuA/m@10m Drahtloser Pad-Ausgang: 6.9 dBuA/m@10m TX-/RX-Frequenzbereich 110 kHz~148 kHz (EU / UK only) Konformittserklrung Anker Innovations Limited erklrt hiermit, dass das Produkt des Typs A2579 den Richtlinien 2014/53/EU und 2011/65/EU entspricht. Der vollstndige Text der https://www.anker.com Verwendung nur in Innenbereichen Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten 05 06 Espaol Indicador LED Estado Azul jo durante 3 segundos, despus se apaga Conectado a la alimentacin Azul jo Parpadeo azul Verde intermitente Cargando dispositivo mvil Se han detectado objetos metlicos o extraos Proteccin de sobretensin, que indica que debe cambiar al adaptador QC/PD T El dispositivo no se podr cargar de forma inalmbrica en los siguientes casos:
O Cuando se utilice una carcasa con una placa magntica o de hierro. O Cuando se utilice una carcasa con una empuadura plegable de tipo popsocket. O Cuando se utilice una carcasa protectora muy gruesa (>5 mm). No coloque ningn objeto extrao entre el dispositivo y la supercie del cargador inalmbrico (incluyendo placas metlicas de un soporte para el coche, tarjetas de crdito, llaves, monedas, metales o tarjetas NFC), ya que esto podra provocar errores de carga inalmbrica o sobrecalentamiento. Los cargadores inalmbricos proporcionan una mayor comodidad que los cargadores por cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que los cargadores por cable. Las temperaturas elevadas reducirn la velocidad de carga y limitarn la potencia, un fenmeno comn a todos los cargadores inalmbricos. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 25 C (77 F). Tanto la carcasa protectora del telfono como la posicin del dispositivo afectarn a la velocidad de carga. Cuanto ms alejado se encuentre el dispositivo del centro del cargador, ms lenta ser la velocidad de carga. Instrucciones de seguridad importantes Consulte la informacin elctrica y de seguridad en la parte inferior antes de instalar y utilizar el producto. Evite las cadas. No desmonte el producto. No lo exponga a lquidos. Para cargar de la forma ms rpida y segura, utilice cables originales o certicados. Este producto solo es adecuado para climas moderados.La temperatura No se deben colocar fuentes de llama desprotegidas, como velas, sobre este producto. Utilice solo un pao o cepillo seco para limpiar este producto. Especicaciones Entrada Sortie 12V 2.5A / 15V 2A 10 W mx.+5 W mx. Sortie USB-A 5V 1A Campo H de radiacin Sortie supportsans l: 11.6 dBuA/m@10m Sortie chargeur platsans l: 6.9 dBuA/m@10m Rango de frecuencias TX/RX 110 kHz~148 kHz (EU / UK only) Declaracin de conformidad Por la presente, Anker Innovations Limited declara que el producto tipo A2579 cumple con las Directivas 2014/53/EU y 2011/65/EU. El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de https://www.anker.com Solo para su uso en interiores Este smbolo indica que el producto no puede tratarse como residuos domsticos. En su lugar, se debe entregar a un punto de recogida adecuado para el reciclaje de los componentes electrnicos y elctricos del equipo. 07 08 Franais Indicateur LED tat puis s'teint Bleu xe Bleu clignotant Vert clignotant En tension Appareil mobile en charge Objets mtallique ou irrgulier dtects Protection contre la surtension indiquant que vous devez utiliser un adaptateur PD charge rapide Instructions importantes de scurit Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou d'utiliser le produit. Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Pour obtenir la charge la plus sre et la plus rapide, utiliser des cbles d'origine ou certis. Ce produit est adapt uniquement aux climats modrs. La temprature ambiante maximale pendant l'utilisation de ce produit ne doit Ce produit ne doit pas tre expos des sources de amme nue, notamment des bougies. T Vous ne pouvez pas charger votre appareil sans l lors des situations suivantes :
O Utilisation d'un tui avec une plaque magntique/en fer O Utilisation d'un tui avec un PopSockets O Utilisation d'un tui ultrapais (> 5 mm) An d'viter toute surchauffe ou dfaillance de chargement, ne placez pas de corps trangers entre votre appareil et la surface du chargeur sans l, notamment, les plaquettes mtalliques sur un support de voiture, les cartes bancaires, les cls, les pices de monnaie, les objets mtalliques et les cartes NFC. Les chargeurs sans l facilitent le chargement par rapport aux versions laires traditionnelles. Nanmoins, restreint par la technologie sans l actuelle, la vitesse de chargement est plus lente que celle des chargeurs laires. Des tempratures leves rduiront la vitesse de chargement et limiteront la puissance, ce qui est un phnomne habituel tous les chargeurs sans l. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 25 C. Le type d'tui de protection et la position de votre appareil sur le chargeur sans l inuencent la vitesse de chargement. Plus l'appareil est plac loin du centre du chargeur sans l, plus la vitesse de chargement sera lente. 09 Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. Spcications techniques 12V 2.5A / 15V 2A Entre Sortie Sortie USB-A Champ H rayonn 10 W max+5 W max 5V 1A Sortie supportsans l: 11.6 dBuA/m@10m Sortie chargeur platsans l: 6.9 dBuA/m@10m Gamme de frquence TX/RX 110 kHz~148 kHz (EU / UK only) Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. RSS-Gen numro 5 mars 2019 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modication non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. 10 Dclaration d'exposition RF:
L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Utilisation en intrieur uniquement Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. Italiano T Le alte temperature ridurranno la velocit e la potenza di ricarica. Si tratta di un fenomeno comune a tutti i caricabatterie wireless. Si consiglia di caricare il dispositivo in ambienti con temperature inferiori a 25 C. Sia la custodia protettiva del telefono sia la posizione del dispositivo sul caricatore wireless inuiscono sulla velocit di ricarica. Quanto pi lontani dal centro del caricatore wireless, tanto pi lenta sar la velocit di ricarica. Informazioni importanti sulla sicurezza A termk zembe helyezse vagy mkdtetse eltt olvassa el az alul tallhat villamossgi s biztonsgi tjkoztatt. Non fare cadere il prodotto. Non smontare il prodotto. Non esporre il prodotto a liquidi. Per effettuare la carica in modo rapido e sicuro, utilizzare i cavi originali o Indicatore LED Stato certicati. Blu sso per 3 secondi, poi si spegne Collegato a una fonte di alimentazione Il prodotto adatto all'utilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40 Blu sso Blu lampeggiante Verde lampeggiante Ricarica del dispositivo mobile C. Rilevati oggetti metallici o anormali Protezione da sovratensione che indica che necessario passare a utilizzare un adattatore QC/PD T Non possibile caricare il dispositivo in modalit wireless nelle seguenti situazioni:
O Se si utilizza una custodia con una piastra magnetica/di ferro;
O Se si utilizza una custodia con supporto esterno (pop socket);
O Se si utilizza una custodia protettiva ultra spessa (> 5 mm). Non posizionare oggetti estranei tra il dispositivo e la supercie del caricatore wireless, inclusi placchette in metallo su supporti per auto, carte di credito, chiavi, monete, metallo o carte contactless, che potrebbero causare errori di ricarica wireless o surriscaldamento. I caricabatterie wireless rendono la ricarica pi comoda rispetto a quelli cablati. Tuttavia, sulla base dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore a quella dei caricabatterie cablati. 11 Non collocare sorgenti di amme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzola. Speciche Ingresso Uscita 12V 2.5A / 15V 2A 10 W max+5 W max Uscita USB-A 5V 1A Campo magnetico irradiato Uscita con supporto wireless: 11.6 dBuA/m@10m Uscita con pad wireless: 6.9 dBuA/m@10m TX/RX Frequency Rangs 110 kHz~148 kHz (solo per UE/Regno Unito) Dichiarazione di conformit Con la presente, Anker Innovations Limited dichiara che il prodotto di tipo A2579 conforme alle Direttive 2014/53/EU e 2011/65/EU. Il testo integrale della Dichiarazione di conformit UE disponibile allindirizzo Internet seguente:
https://www.anker.com 12 Solo per uso in ambienti interni Questo simbolo indica che questo prodotto non deve essere trattato come riuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. Portugus Indicador de LED Status Azul constante por 3 segundos, em seguida, desligado Conectado energia Azul constante Luz azul piscando Luz verde piscando Carregar o dispositivo mvel Metal ou objetos anormais detectados Proteo contra sobretenso, indicando que preciso alternar para um adaptador QC/PD O dispositivo no pode ser carregado sem o caso voc esteja usando:
T O Uma capa com placa magntica ou de ferro;
O Um Popsocket;
O Uma capa protetora muito espessa (mais de 5 mm). No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem o, incluindo suportes veiculares em metal, cartes de crdito, chaves, moedas, metal ou cartes NFC pois isso far com que o carregamento sem o falhe ou causar superaquecimento. Os carregadores sem o tornam o carregamento mais conveniente do que os carregadores com o, mas limitados pela tecnologia sem o atual, sua velocidade de carregamento menor do que a dos carregadores com o. Altas temperaturas reduziro a velocidade de carregamento e restringiro a potncia. Isso um fenmeno comum a todos os carregadores sem o. recomendado carregar o dispositivo em ambientes com temperaturas abaixo de 25C . Tanto a capa protetora do telefone quanto a posio deste sobre o carregador sem o afetaro a velocidade de carregamento. Quanto mais longe o dispositivo estiver do centro do carregador sem o, mais lenta ser a velocidade de carregamento. 13 Instrues importantes de segurana Consulte as informaes sobre produtos eltricos e segurana que se encontram ao fundo antes de instalar e operar o produto. Evite deixar cair. No desmonte. No exponha a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certicados para uso. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes abertas com chama, como velas, no devem car prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. Especicaes Entrada Sada Sada USB-A Campo H radiado 12V 2.5A / 15V 2A 10 W max+5 W max 5V 1A Sada de suporte sem o: 11.6 dBuA/m@10m Sada de base sem o: 6.9 dBuA/m@10m Intervalo de frequncias TX/RX 110 kHz~148 kHz (apenas para UE/Reino Unido) Verklaring van overeenstemming Hierbij verklaart Anker Innovations Limited dat het producttype A2579 in overeenstemming is met de richtlijnen 2014/53/EU en 2011/65/EU. De volledige tekst van de EU-verklaring van overeenstemming is beschikbaar op het volgende https://www.anker.com Apenas para utilizao em espaos interiores Este smbolo indica que o produto no deve ser tratado como lixo domstico. Em vez disso, ele deve ser entregue a um ponto de coleta devido para reciclagem do equipamento eletrnico e eltrico. 14 P
3 ),
, QC/PD
O / ;
O ;
O (> 5 ) .
, , , NFC-
. 25C .
, . 15
. 40 C.
, . 12V 2.5A / 15V 2A
. 10 +. 5 USB-A 5V 1A
: 11.6 dBuA/m@10m
: 6.9 dBuA/m@10m 110 ~148 ( ) Anker Innovations Limited , A2579 2014/53/EU 2011/65/EU.
https://www.anker.com
. 16 Trk LED Gstergeler Durum 3 saniye sabit mavi, sonra snk Gce bal Sabit mavi Yanp snen mavi Yanp snen yeil Cep telefonu arj ediliyor Metal veya anormal cisim tespit edildi Yksek voltaj korumas, QC/PD adaptre geilmesi gerektiini gsterir T u senaryolarda cihaznz kablosuz arj edemezsiniz:
O Mknatsl/demir plakal klf kullanarak;
O Ayakl klf kullanarak;
O Ultra kaln (> 5 mm) koruyucu telefon klf kullanarak. Cihaznz ile kablosuz arj cihaz yzeyi arasna ara montaj balantsndaki metal plakalar, kredi kartlar, kap anahtarlar, bozuk paralar, metal nesneler ve NFC kartlar gibi kablosuz arj ileminin baarsz olmasna veya ar snmaya neden olacak yabanc cisimler yerletirmeyin. Kablosuz arj cihazlar arj ilemini kablolu arj cihazlarna gre daha kolaylatrr fakat mevcut kablosuz teknolojisiyle snrl olduundan arj hz kablolu arj cihazlarna gre daha dktr. Tm kablosuz arj cihazlarnda olduu gibi yksek scaklklarda arj hz der ve g kstlanr. Cihaznz 25C / 77F altndaki scakla sahip ortamlarda arj etmeniz nerilir. Koruyucu telefon klf ve cihaznzn konumu kablosuz arj cihaznn arj hzn etkileyecektir. Cihaz kablosuz arj cihaznn merkezinden ne kadar uzakta olursa arj hz da o lde decektir. nemli Gvenlik Talimatlar Ltfen rn kurmadan ve kullanmadan nce alttaki elektrik ve gvenlik bilgilerine bakn. Drmekten kann. Paralarna ayrmayn. Sv temasndan kann. 17 En gvenli ve hzl arj iin orijinal ve sertikal kablolar kullann. Bu rn yalnzca lman iklimlerde kullanma uygundur. Bu rnn kullanm srasnda maksimum ortam scakl 40C' gememelidir. Bu rnn zerine mum gibi ak ate kaynaklar yerletirilmemelidir. Bu rn temizlemek iin yalnzca kuru bir bez veya fra kullann. Teknik zellikler Giri k 12V 2.5A / 15V 2A Maks. 10 W+Maks. 5 W USB-A k 5V 1A Manyetik Yaylm Alan Kablosuz Ayaklk k:11.6 dBuA/m@10m Kablosuz Pad k:6.9 dBuA/m@10m TX/RX Frekans Yant 110 kHz~148 kHz (yalnzca AB ve ngiltere iin) Uygunluk Beyan Bu belge ile Anker Innovations Limited irketi A2579 rn trnn 2014/53/EU ve 2011/65/EU Direktierine uygun olduunu beyan etmektedir. AB Uygunluk beyannn tam metni aadaki internet adresinde mevcuttur:
https://www.anker.com/
Yalnzca kapal mekanda kullanlabilir Bu sembol rnn evsel atk olarak deerlendirilmemesi gerektiini gsterir. Elektrikli ve elektronik ekipmann geri dntrlmesi iin uygun toplama noktalarna braklmaldr. 18 LED 3 QC/PD T O O O
( :5mm )
NFC ( IC ) ) 25 C 19 40 12V 2.5A / 15V 2A 10W + 5W USB-A 5V 1A Anker Innovations Limited ( : A2579 ) 2014/53/EU 2011/65/EU EU URL https://www.anker.com 20 LED
3
, QC/PD T O O O
(> 5mm)
, , , NFC .
. 25 C/77
. 40
. C 21
. USB-A 12V 2.5A / 15V 2A 10W + 5W 5V 1A H 11.6 dBuA/m@10m 6.9 dBuA/m@10m TX/RX 110 kHz~148 kHz (EU/UK )
. LED 3 QC/PD 22 T O O O
> 5 NFC 25 C / 77 C 40 USB-A 12V 2.5A / 15V 2A 10W+ 5W 5V 1A
: 11.6 dBuA/m@10m
: 6.9 dBuA/m@10m
/ 110 kHz~148 kHz /
Anker Innovations Limited A2579 2014/53/
EU 2011/65/EU :
https://www.anker.com LED 3 T QC/PD O O O
pop
(> 5 mm) NFC 25 C / 77 23 24 12V 2.5A / 15V 2A 10W+ 5W 5V 1A
: 11.6 dBuA/m@10m
: 6.9 dBuA/m@10m TX/RX 110 kHz~148 kHz ( / ) https://www.anker.com QC/PD pop 5 T O O O NFC 77 25
. 25 26 12V 2.5A / 15V 2A 5
10 11.6 dBuA/m@10m :
6.9 dBuA/m@10m :
5V 1A A USB A2579
(LED(
, 3
QC/PD 27 T
; O
; O
." 5- , O
,NFC , ,
. 25
. 40C
28 Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:
TR: Mteri Hizmetleri JP:
KO:
AR HE 1 2 3 5 12V 2.5A / 15V 2A 5W +
10W 5V 1A 11.6 dBuA/m@10m:
6.9 dBuA/m@10m:
(148KHz~110KHz) TX/RX /
EU/
A2579 EU/
EN: 18-month limited warranty* | DE: 18 Monate beschrnkte Herstellergarantie*
ES: Garanta limitada de 18 meses* | FR: Garantie de 18 mois*
IT: Garanzia valida 18 mesi* | PT: 18 meses de garantia limitada RU: 18 | TR: 18 aylk snrl garanti
) | KO:
JP:
18
: 18
: 18 18 HE 18 AR
* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono inuenzati dalle garanzie concesse dalla presente Garanzia limitata. 29 30 EN: Lifetime technical support | DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida | FR: Support technique vie IT: Assistenza post-vendita a vita | PT: Suporte tcnico ao longo da vida til do produto RU:
TR: mr boyu teknik destek JP: | KO:
:HE | : AR support@anker.com support.mea@anker.com (For Middle East and Africa Only)
(US) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
( ) +86 400 0550 036
( ) 03 4455 7823
(Middle East & Africa) +971 42463266
(UAE) +971 8000320817
(KSA) +966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP
@Anker 31 32