FCC ID: 2AOKB-A2503B PowerWave Pad

For FAQs and more information, please visit:

https://www.anker.com/support A2503 51005002061 V05 English Deutsch Espaol Franais Italiano Portugus P 01 04 06 08 10 12 14 16 18 20 22 24 26 EN Solid blue Flashing blue Flashing green LED Indicator Status Solid blue for 3 seconds, then off Connected to power Charging mobile device Metal or abnormal objects detected Overvoltage protection, indicating you need to switch to a 5V/9V DC adapter You cannot charge your device wirelessly in these scenarios:

T O using a case with a magnetic/iron plate;

O using a case with a pop socket;

O using an ultra-thick (> 5 mm) protective phone case. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25C / 77F. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be. Important Safety Instructions Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. 01 The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave Pad Model: A2503 The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530 IC Statement This device complies with RSS condition that this device does not cause harmful interference. 216 of Industry Canada. Operation is subject to the This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Specifications Input Output Size Weight 5V 2A / 9V 2A 10W Max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3-5, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom 02 03 berspannungsschutz, zeigt an, dass Sie auf einen 5V/9V Gleichstromadapter wechseln mssen Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Wichtige Sicherheitsinformationen Nicht fallenlassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Zum sichersten und schnellsten Laden nur Original- oder zertifizierte Kabel verwenden. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Technische Daten Eingang 5V 2A / 9V 2A Ausgang 10 W max. Abmessungen 100 x 100 x 11,2 mm Gewicht 67 g DE LED-Anzeige Status Leuchtet 3 Sekunden lang blau, dann aus Gert ldt Leuchtet blau Blinkt blau Blinkt grn An Stromversorgung angeschlossen Metall- oder abnormale Gegenstnde erkannt Sie knnen Ihr Gert in den Folgenden Situationen nicht kabellos T laden:

O Wenn Sie eine Hlle mit einer magnetischen/Eisenplatte verwenden;

O Wenn Sie eine Hlle mit einem Popsocket verwenden;

O Wenn Sie eine ultradicke (> 5 mm) Schutzhlle verwenden. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Trschlssel, Mnzen, Metall oder NFC-Karten, da dies dazu fhren kann, dass das kabellose Aufladen fehlschlgt oder das Gert berhitzt. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen reduzieren die Ladegeschwindigkeit und schrnken die Leistung ein. Dies ist unter kabellosen Ladegerten ein weit verbreitetes Phnomen. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 25 C laden. Die Schutzhlle und die Position Ihres Gertes auf dem kabellosen Ladegert beeinflusst die Ladegeschwindigkeit. Je weiter es von der Mitte des kabellosen Ladegerts entfernt platziert ist, desto langsamer ist die Ladegeschwindigkeit. 04 05 ES Indicador LED Estado Azul fijo durante 3 segundos, despus se apaga Conectado a la alimentacin Azul fijo Cargando dispositivo mvil Parpadeo azul Se han detectado objetos metlicos o extraos Instrucciones de seguridad importantes Evite las cadas. No desmonte el producto. No lo exponga a lquidos. Para cargar de la forma ms rpida y segura, utilice cables originales o certificados. Este producto solo es adecuado para climas moderados.La temperatura ambiente mxima durante el uso de este producto no debe superar los 40C. No se deben colocar fuentes de llama desprotegidas, como velas, sobre este Verde intermitente Proteccin de sobretensin, que indica que debe cambiar al adaptador de CC de 5V/9V producto. Utilice solo un pao o cepillo seco para limpiar este producto. T El dispositivo no se podr cargar de forma inalmbrica en los siguientes casos:

O Cuando se utilice una carcasa con una placa magntica o de hierro. O Cuando se utilice una carcasa con una empuadura plegable de tipo popsocket. Especificaciones Entrada 5V 2A / 9V 2A Salida 10W mx. Tamao 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in Peso 67 g / 2.4 oz O Cuando se utilice una carcasa protectora muy gruesa (>5 mm). No coloque ningn objeto extrao entre el dispositivo y la superficie del cargador inalmbrico (incluyendo placas metlicas de un soporte para el coche, tarjetas de crdito, llaves, monedas, metales o tarjetas NFC), ya que esto podra provocar errores de carga inalmbrica o sobrecalentamiento. Los cargadores inalmbricos proporcionan una mayor comodidad que los cargadores por cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que los cargadores por cable. Las temperaturas elevadas reducirn la velocidad de carga y limitarn la potencia, un fenmeno comn a todos los cargadores inalmbricos. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 25 C (77 F). Tanto la carcasa protectora del telfono como la posicin del dispositivo afectarn a la velocidad de carga. Cuanto ms alejado se encuentre el dispositivo del centro del cargador, ms lenta ser la velocidad de carga. 06 07 Bleu clignotant Objets mtallique ou irrgulier dtects Ce produit ne doit pas tre expos des sources de flamme nue, notamment des Vert clignotant Protection contre la surtension indiquant que vous devez utiliser un adaptateur 5V/9V CC Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. FR Indicateur LED tat Bleu fixe pendant 3secondes, puis s'teint En tension Bleu fixe Appareil mobile en charge Vous ne pouvez pas charger votre appareil sans fil lors des situations T suivantes :

O Utilisation d'un tui avec une plaque magntique/en fer O Utilisation d'un tui avec un PopSockets O Utilisation d'un tui ultrapais (> 5 mm) Afin d'viter toute surchauffe ou dfaillance de chargement, ne placez pas de corps trangers entre votre appareil et la surface du chargeur sans fil, notamment, les plaquettes mtalliques sur un support de voiture, les cartes bancaires, les cls, les pices de monnaie, les objets mtalliques et les cartes NFC. Les chargeurs sans fil facilitent le chargement par rapport aux versions filaires traditionnelles. Nanmoins, restreint par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Des tempratures leves rduiront la vitesse de chargement et limiteront la puissance, ce qui est un phnomne habituel tous les chargeurs sans fil. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 25 C. Le type d'tui de protection et la position de votre appareil sur le chargeur sans fil influencent la vitesse de chargement. Plus l'appareil est plac loin du centre du chargeur sans fil, plus la vitesse de chargement sera lente. Instructions importantes de scurit Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Pour obtenir la charge la plus sre et la plus rapide, utiliser des cbles d'origine ou Ce produit est adapt uniquement aux climats modrs. La temprature ambiante maximale pendant l'utilisation de ce produit ne doit pas certifis. dpasser 40C. bougies. Spcifications techniques Entre Sortie Taille Poids 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. 08 09 IT Indicatore LED Stato Blu fisso per 3 secondi, poi si spegne Informazioni importanti sulla sicurezza Non fare cadere il prodotto. Non smontare il prodotto. Non esporre il prodotto a liquidi. Collegato a una fonte di alimentazione Per effettuare la carica in modo rapido e sicuro, utilizzare i cavi originali o Blu fisso Ricarica del dispositivo mobile Il prodotto adatto all'utilizzo in climi moderati. Blu lampeggiante Rilevati oggetti metallici o anormali Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40 Verde lampeggiante Protezione da sovratensione indicante che necessario passare a utilizzare un adattatore da 5V/9Vcc Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzola. certificati. C. Specifiche T Non possibile caricare il dispositivo in modalit wireless nelle seguenti situazioni:

O Se si utilizza una custodia con una piastra magnetica/di ferro;

O Se si utilizza una custodia con supporto esterno (pop socket);

O Se si utilizza una custodia protettiva ultra spessa (> 5 mm). Non posizionare oggetti estranei tra il dispositivo e la superficie del caricatore wireless, inclusi placchette in metallo su supporti per auto, carte di credito, chiavi, monete, metallo o carte contactless, che potrebbero causare errori di ricarica wireless o surriscaldamento. I caricabatterie wireless rendono la ricarica pi comoda rispetto a quelli cablati. Tuttavia, sulla base dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore a quella dei caricabatterie cablati. Le alte temperature ridurranno la velocit e la potenza di ricarica. Si tratta di un fenomeno comune a tutti i caricabatterie wireless. Si consiglia di caricare il dispositivo in ambienti con temperature inferiori a 25 C. Sia la custodia protettiva del telefono sia la posizione del dispositivo sul caricatore wireless influiscono sulla velocit di ricarica. Quanto pi lontani dal centro del caricatore wireless, tanto pi lenta sar la velocit di ricarica. Ingresso 5V 2A / 9V 2A Uscita Max 10W Dimensioni 100 x 100 x 11.2 mm Peso 67 g 10 11 Instrues importantes de segurana Evite deixar cair. No desmonte. No exponha a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certificados para Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder uso. 40 C. Fontes abertas com chama, como velas, no devem ficar prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. Especificaes Entrada Sada Tamanho Peso 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz PT Indicador de LED Status Azul constante por 3 segundos, em seguida, desligado Conectado energia Azul constante Carregar o dispositivo mvel Luz azul piscando Metal ou objetos anormais detectados Luz verde piscando Proteo contra sobretenso, indicando que preciso alternar para um adaptador DC 5V/9V O dispositivo no pode ser carregado sem fio caso voc esteja usando:

T O Uma capa com placa magntica ou de ferro;

O Um Popsocket;

O Uma capa protetora muito espessa (mais de 5 mm). No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fio, incluindo suportes veiculares em metal, cartes de crdito, chaves, moedas, metal ou cartes NFC pois isso far com que o carregamento sem fio falhe ou causar superaquecimento. Os carregadores sem fio tornam o carregamento mais conveniente do que os carregadores com fio, mas limitados pela tecnologia sem fio atual, sua velocidade de carregamento menor do que a dos carregadores com fio. Altas temperaturas reduziro a velocidade de carregamento e restringiro a potncia. Isso um fenmeno comum a todos os carregadores sem fio. recomendado carregar o dispositivo em ambientes com temperaturas abaixo de 25C . Tanto a capa protetora do telefone quanto a posio deste sobre o carregador sem fio afetaro a velocidade de carregamento. Quanto mais longe o dispositivo estiver do centro do carregador sem fio, mais lenta ser a velocidade de carregamento. 12 13

. 40 C.

, . 5V 2A / 9V 2A

. 10 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz RU

( 3 ),

, 5V/9V T

O / ;

O ;

O (> 5 ) .

, , , NFC-

. 25C .

, . 14 15 LED 3 JP 5V/9V DC 40 5V 2A / 9V 2A 10W 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz T O /

O O ( :5mm )

NFC ( IC ) ) 25 C 16 17 KO LED 3

, 5V/9V DC

. T O O O

(> 5mm)

, , , NFC .

. 25 C/77

. 40 C . 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz 18 19 5V/9V 40 C LED 3 T O O O

> 5 NFC 25 C / 77 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz 20 21 40 C

( ) 5V/9V DC 3 LED T O O O

pop

(> 5 mm) NFC 25 C / 77 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz 22 23 AR T 5V/9V

/ O pop O

.) 5 >( O NFC

. 77 / 25

. . 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz 24 25 HE

)LED(

, 3

5V/9V )DC(

; O

; O

." 5- , O T

,NFC , , ,

. 25

. 40C

. , 5V 2A / 9V 2A 10W max 100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in 67 g / 2.4 oz Indoor use only. This product should not be disposed of with normal waste. It must be recycled. 26 27

A2503 Pantone 877c Pantone cool gray 7C Pantone 877c UV Pantone 877c UV dylan 20210422 V3 Note: Because the product size is too small, can not write manufacturer address, the specific address please see the contents of the product user manual. 20mm Label length63.44mm Label width8.2mm

C5266091_X10_Ed.2 Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/14/2021 Subject: Request for Confidentiality FCC ID: 2AOKB-A2503B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: louis Qi Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Anker Innovations Limited Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: PowerWave Pad Model Number: A2503 FCC Identifier: 2AOKB-A2503B We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 5/14/2021 Title:

Signature of applicant:

1/1