FCC ID: 2AOKB-A2595 PowerWave Sense 2-in-1 Stand with Watch Charging Cable Holder

For FAQs and more information, please visit:

anker.com/support

@Anker Deutschland

@Anker Japan

@Anker Product Number:A2595 51005002569 V02 English Deutsch Espaol Franais Italiano Portugus P Trk

01 04 06 08 12 13 15 17 19 21 22 24 25 28 Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. English Solid blue Flashing blue Flashing blue LED Indicator (on the front) Status Solid blue for 3 seconds, then turns off Connected to power Charging your phone Metal objects detected Overvoltage or undervoltage protection LED Indicator (on the back) Status To charge your Apple Watch, use your original Apple Watch Magnetic T Charging Cable (not included). Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Using an ultra-thick protective phone case or a case with a magnetic/

metal plate is not recommended as it may affect the wireless charging function. Do not place any foreign objects between your smartphone and the wireless chargers surface, including metal pads on a car mount, credit cards, keys, coins, metal objects, or NFC cards, as it may cause overheating. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. 40C. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio

/ TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Product Name: PowerWave Sense 2-in-1 Stand with Watch Charging Cable Holder Model: A2595 02 Important Safety Instructions Radiation Exposure Statement Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. 01 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 Specications Input Output 9V 2.67A / 12V 2A 5W / 7.5W / 10W / 11W IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2595 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2595 is in compliance with Radio Equipment Regulations 2017. The full text of the GB declaration of conformity is available at the following internet address:

https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Indoor use only. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. LED-Anzeige (an der Vorderseite) Status Leuchtet blau fr 3 Sekunden und verlischt dann An Stromversorgung angeschlossen Leuchtet blau Auaden Ihres Telefons Metallgegenstnde erkannt berspannungs- oder Unterspannungsschutz LED-Anzeige (an der Rckseite) Status Deutsch Blinkt blau Blinkt blau Inkompatibler Netzadapter angeschlossen, was darauf hinweist, dass Sie auf ein Ladegert mit Quick Charge 2.0/3.0 oder Power Delivery wechseln mssen 03 04 T Verwenden Sie zum Auaden Ihrer Apple Watch Ihr originales Apple Watch Magnetic-Ladekabel (nicht im Lieferumfang enthalten). Verbinden Sie das kabellose Ladegert mit einem Steckernetzteil mit Quick Charge 2.0/3.0 oder Power Delivery. Schlieen Sie es nicht an ein 5-V-/1-A-Wandladegert oder den USB-Anschluss eines Computers an, da dies das kabellose Laden beeintrchtigen knnte. Von der Verwendung extrastarker Smartphone-Schutzhllen oder Schutzhllen mit Magnet- bzw. Metalleinstzen wird abgeraten, da diese die kabellose Ladefunktion beeintrchtigen knnen. Legen Sie keine Fremdkrper zwischen Ihr Smartphone und die Oberche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Schlssel, Mnzen, Metallgegenstnde oder NFC-Karten, da dies zu berhitzung fhren kann. Wichtige Sicherheitsinformationen Bitte lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. Nicht fallen lassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Fr das sichere und schnellste Auaden verwenden Sie Originalkabel oder zertizierte Kabel. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Konformittserklrung Anker Innovations Limited erklrt hiermit, dass das Produkt des Typs A2595 den Richtlinien 2014/53/EU & 2011/65/EU entspricht. Der vollstndige Text der EU-

Konformittserklrung ist online unter der folgenden Adresse verfgbar:

https://www.anker.com/

05 Technische Daten Ausgang Leistungsaufnahme 9V 2,67A / 12V 2A Verwendung nur in Innenbereichen. Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. Indicador LED (en la parte frontal) Estado Espaol se apaga Azul jo Azul intermitente Azul intermitente Conectado a la alimentacin Carga del telfono en curso Se han detectado objetos metlicos Proteccin contra sobretensin o subtensin Se ha conectado un adaptador de CA no compatible. Esto indica que es necesario cambiar a un adaptador Quick Charge 2.0/3.0 o Power Delivery 06 Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel Indicador LED (en la parte trasera) Estado T Para cargar un dispositivo Apple Watch, utilice el cable de carga magntica original del Apple Watch (no incluido). Conecte el cargador inalmbrico a un adaptador de pared Quick Charge 2.0/3.0 o Power Delivery. No lo conecte a un cargador de Especicaciones Entrada Salida 2A de carga inalmbrica podra verse afectada. No se recomienda utilizar carcasas de telfono protectoras muy gruesas o con placas magnticas/metlicas, ya que la funcin de carga inalmbrica podra verse afectada. No coloque ningn objeto extrao entre el smartphone y la supercie del cargador inalmbrico (incluyendo placas metlicas de un soporte para el coche, tarjetas de crdito, llaves, monedas, objetos de metal o tarjetas NFC), ya que esto podra provocar un sobrecalentamiento. Solo para su uso en interiores. Este smbolo indica que el producto no puede desecharse junto con la basura domstica. En lugar de eso, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos elctricos y electrnicos. Instrucciones de seguridad importantes Consulte la informacin elctrica y de seguridad en la parte inferior antes de instalar o utilizar el producto. Tmoin lumineux ( l'avant) tat Evite que el dispositivo sufra cadas. No desmonte el dispositivo. No exponga el dispositivo a lquidos. Para disfrutar de una experiencia de carga ms rpida y segura, utilice cables originales o certicados. Este producto solo es adecuado para climas moderados. La temperatura ambiente mxima durante el uso del producto no debe superar No coloque fuentes de llama abierta, como velas, sobre este producto. Utilice solo un cepillo o un pao seco para limpiar el producto. Declaracin de conformidad Por la presente, Anker Innovations Limited declara que el modelo de producto A2595 cumple con las Directivas 2014/53/UE y 2011/65/UE. El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de Internet: https://www.anker.com/

Franais puis s'teint Bleu xe Bleu clignotant En tension Votre tlphone est en charge Objets mtalliques dtects Protection contre des surtensions ou des sous-tensions Tmoin lumineux ( l'arrire) tat Bleu clignotant Delivery Adaptateur secteur incompatible connect, indiquant que vous devez passer un 08 07 T Pour charger votre Apple Watch, utilisez votre cble de charge magntique pour Apple Watch (non inclus). Branchez le chargeur sans fil un adaptateur mural Quick Charge2.0/3.0 ou Power Delivery. Ne le branchez pas un chargeur mural 5A/1A ou un port USB d'ordinateur: cela pourrait affecter la fonction de chargement sans fil. L'utilisation d'un tui de protection ultra-pais ou avec une plaque magntique/mtallique n'est pas recommande: cela risquerait d'affecter la fonction de charge sans fil. Afin d'viter toute surchauffe, ne placez pas de corps trangers entre votre smarpthone et la surface du chargeur sans fil (plaquettes mtalliques sur support de voiture, cartes bancaires, cls, pices, objets mtalliques, cartes NFC). Consignes de scurit importantes Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou d'utiliser le produit. Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Afin de garantir un chargement plus rapide et plus sr, utiliser les cbles dorigine ou des cbles certifis. Ce produit est adapt uniquement aux climats temprs. La temprature ambiante maximale pendant lutilisation de ce produit ne doit Ce produit ne doit pas tre expos des sources de flamme nue telles que les Nettoyez ce produit uniquement avec un chiffon sec ou une brosse pas dpasser 40C. bougies. Dclaration FCC Cet appareil est conforme la partie15 du rglement de la FCC. Le fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas produire d'interfrences nuisibles, et (2) cet appareil doit accepter toutes les interfrences subies, mme celles susceptibles d'en compromettre le fonctionnement. Avertissement: les changements ou les modifications non expressment 09 approuvs par la partie responsable de la conformit pourraient entraner une annulation de l'autorisation d'utilisation de l'quipement. REMARQUE: cet appareil a t test et dclar conforme aux restrictions relatives un appareil numrique de ClasseB, en application de la section15 du rglement de la FCC. Ces restrictions sont dsignes afin de fournir une protection raisonnable contre des interfrences nuisibles dans une installation rsidentielle. Cet appareil gnre et utilise des frquences radio et peut galement en mettre. De plus, si celui-ci n'est pas install et utilis conformment aux instructions, il peut entraner des interfrences avec les communications radio. Cependant, il n'est nullement garanti que ces interfrences se produiront dans une installation particulire.Si cet appareil provoque des interfrences nuisibles la rception de la radio ou de la tlvision, ce qui peut tre dtermin en mettant en route l'appareil et en l'arrtant, il est recommand d'essayer de corriger les interfrences en prenant l'une ou plusieurs des mesures suivantes: (1) rorienter ou dplacer l'antenne de rception, (2) loigner davantage l'appareil du rcepteur; (3) brancher l'appareil une prise sur un circuit diffrent de celui auquel le rcepteur est connect; (4) consulter le revendeur ou un technicien expriment en radio/tlvision pour obtenir une assistance. Dclaration sur l'exposition aux radiations Cet quipement est conforme aux limites FCC d'exposition aux rayonnements dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimum de 20cm entre le radiateur et votre corps. Nom du produit: PowerWave Sense 2-in-1 Stand with Watch Charging Cable Holder Modle: A2595 L'importateur suivant est la partie responsable (pour les questions relatives au rglement FCC uniquement). Nom de la socit: Fantasia TradingLLC Adresse: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Tlphone: +1 800 988 7973 Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. 10 RSS-Gen numro 5 mars 2019 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modication non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Dclaration de conformit Par les prsentes, Anker Innovations Limited dclare que le produit de Blu lampeggiante complet de la dclaration de conformit la rglementation europenne est https://www.anker.com/

Spcications ENTRE Sortie 9V 2,67A / 12V 2A Utilisation en intrieur uniquement. Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. 11 Italiano Indicatore LED (parte anteriore) Stato Spia blu ssa per 3 volte che poi si spegne Blu sso Ricarica del telefono Collegamento a una fonte di alimentazione Blu lampeggiante Rilevati oggetti metallici Protezione da sovratensione o sottotensione Indicatore LED (parte posteriore) Stato stato collegato un adattatore CA non compatibile. necessario passare a un adattatore Quick Charge 2.0/ 3.0 o a uno con Power Delivery. T Per caricare Apple Watch, utilizzare il cavo magnetico di ricarica originale per Apple Watch (non incluso). Collegare il caricabatterie wireless a un adattatore Quick Charge 2.0/3.0 o a uno Power Delivery da parete. Non collegarlo a un poich loperazione potrebbe alterare la funzionalit di ricarica del dispositivo. Si consiglia di non utilizzare custodie per telefono estremamente sottili o dotate di una piastra magnetica o in metallo poich potrebbero interferire con la funzione di ricarica wireless. Per evitare il surriscaldamento, non collocare alcun corpo estraneo, come piastre di metallo di supporti per automobili, carte di credito, chiavi, monete, oggetti metallici o schede NFC, tra lo smartphone e la supercie del caricabatterie wireless. Istruzioni importanti sulla sicurezza Fare riferimento alle informazioni elettriche e di sicurezza sul fondo prima di installare o utilizzare il prodotto. Non lasciar cadere il prodotto. 12 Non smontarlo. Non esporlo a liquidi. Per effettuare la ricarica in modo rapido e sicuro, utilizzare cavi originali o certicati. Il prodotto adatto allutilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai Non collocare sorgenti di amme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o un pennello Dichiarazione di conformit Con la presente, Anker Innovations Limited dichiara che il prodotto di tipo A2595 conforme alle Direttive 2014/53/UE e 2011/65/UE. Il testo integrale della Dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.anker.com/

Speciche Ingresso Uscita 2A T Solo per uso in ambienti interni. Questo simbolo indica che il presente prodotto non deve essere trattato come riuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. Portugus Indicador LED (na parte frontal) Status Azul constante por 3 segundos, em seguida apaga Conectado energia Azul constante Como carregar seu celular Piscando na cor azul Objetos metlicos foram detectados Proteo contra tenso alta ou baixa Indicador LED (na parte traseira) Status Piscando na cor azul Adaptador CA incompatvel conectado, indicando que voc precisa mudar para um adaptador Quick Charge 2.0/3.0 ou Power Delivery Para carregar seu Apple Watch, use seu cabo de carregamento magntico original do Apple Watch (no incluso). Conecte o carregador sem o ao adaptador de parede Quick Charge 2.0/3.0 ou Power Delivery. No o conecte a um carregador de parede de 5 V/1 A ou a uma entrada USB de um computador, pois isso pode afetar a funo de carregamento. No recomendado usar uma capa ultra-grossa com placa magntica/metlica para proteger o dispositivo, pois isso pode afetar a funo de carregamento sem o. No coloque nenhum objeto estranho entre seu smartphone e a superfcie do carregador sem o, incluindo as almofadas metlicas de suportes para carro, cartes de crdito, chaves, moedas, objetos de metal ou cartes NFC, isso pode causar o superaquecimento. Instrues importantes de segurana Consulte as informaes eltricas e de segurana no nal antes de instalar ou operar o produto. Evite deixar cair. No desmonte. No exponha o produto a lquidos. 13 14 Para carregar com rapidez e segurana, use cabos originais ou certicados para uso. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes de chama aberta, como velas, no devem car prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto Declarao de conformidade A Anker Innovations Limited declara, por meio deste documento, que o produto tipo A2595 est em conformidade com as Diretivas 2014/53/UE e 2011/65/UE. O texto completo da declarao de conformidade em relao Unio Europeia est disponvel no seguinte endereo na Internet:

https://www.anker.com/

Especicaes Entrada Sada 9V 2,67A / 12V 2A 5W / 7.5W / 10W / 11W Apenas para uso interno. Este smbolo indica que o produto no deve ser tratado como lixo domstico. Em vez disso, ele deve ser entregue a um ponto de coleta devido para reciclagem do equipamento eletrnico e eltrico. P

( ) 3 , 15

( ) T

, , Quick Charge 2.0/3.0 Power Delivery Apple Watch Apple Watch Magnetic Charging Cable (

). Quick Charge 2.0/3.0 Power Delivery. 5 /1 USB- ,

, , , , NFC-,

. 16 40 C.

, . Yanp snen mavi T Anker Innovations Limited , A2595 2014/53/EU 2011/65/EU.

https://www.anker.com/

9 2,67 / 12 2 5 / 7,5 / 10 / 11

. Hzl arj 2.0/3.0 veya G Aktarm adaptrne gemeniz gerektiini belirten uyumsuz AC adaptr balants Apple Watch cihaznz arj etmek iin orijinal Apple Watch Mknatsl arj Kablonuzu kullann (rnle birlikte verilmez). Kablosuz arj cihazn Hzl arj 2.0/3.0 veya duvara monte G Aktarm adaptrne balayn. Kablosuz arj ilevini etkileyebileceinden 5V/1A duvara monte arj cihazna veya bilgisayardaki USB balant noktasna balamayn. Kablosuz arj ilevini etkileyebileceinden ok kaln koruyucu telefon klar veya mknatsl/metal gvdeli klar kullanlmas nerilmez. Akll telefonunuz ile kablosuz arj cihaznn arasna ara montaj balantsndaki metal plakalar, kredi kartlar, anahtarlar, bozuk paralar, metal nesneler veya NFC kartlar gibi ar snmaya neden olabilecek yabanc cisimler yerletirmeyin. nemli Gvenlik Talimatlar Ltfen rn kurmadan ve kullanmadan nce alttaki elektrik ve gvenlik bilgilerine bakn. Drmekten kann. Paralarna ayrmayn. Sv temasndan kann. En gvenli ve hzl arj iin orijinal ve sertikal kablolar kullann. Bu rn yalnzca lman iklimlerde kullanma uygundur. Bu rnn kullanm srasnda maksimum ortam scakl 40C' gememelidir. Bu rnn zerine mum gibi ak ate kaynaklar yerletirilmemelidir. Bu rn temizlemek iin yalnzca kuru bir bez veya fra kullann Uygunluk Beyan Bu belge ile Anker Innovations Limited irketi A2595 rn trnn 2014/53/EU ve 2011/65/EU Direktierine uygun olduunu beyan etmektedir. AB Uygunluk beyannn tam metni aadaki internet adresinde mevcuttur:

https://www.anker.com/

Trk LED Gsterge (nde) Durum 3 saniye sabit mavi yanar, sonra sner Gce bal Yanp snen mavi LED Gsterge (arkada) 17 Sabit mavi Telefonunuz arj ediliyor Teknik zellikler Metal cisim tespit edildi Yksek veya ar gerilim korumas Durum GR k 9V 2,67A / 12V 2A 5W / 7,5W / 10W / 11W 18 Indoor use only. Bu sembol rnn evsel atk olarak deerlendirilmemesi gerektiini gsterir. Elektrikli ve elektronik ekipmann geri dntrlmesi iin uygun toplama noktalarna braklmaldr. LED ( ) 3 LED ( ) AC Qualcomm Quick Charge 2.03.0 USB Power Delivery T Apple Watch Apple Watch

( ) Qualcomm Quick Charge 2.03.0 USB Power Delivery AC 5W PC USB

NFC ( IC ) ) 40

( ) 9V 2.67A / 12V 2A 5W / 7.5W / 10W / 11W 19 20 LED ( )

( ) V

.A / V A W / .W / W / W

. LED ( ) AC Quick Charge

./. PD(Power Delivery)

. T

. Quick Charge ./. PD(Power Delivery)

. V/A USB

LED 3

, , , , NFC

. . LED

. C . 21 QC 2.0/3.0 PD 22 T Apple Watch Apple Watch QC 2.0/3.0 PD 5V/1A USB

NFC LED ( ) 3 LED ( ) 40 C 9V 2.67A / 12V 2A 5W / 7.5W / 10W / 11W 23 AC Quick Charge 2.0/3.0 Power Delivery T Apple Watch Apple Watch

( ) Quick Charge 2.0/3.0 Power Delivery 5V/1A USB

NFC 40 C

( ) 24 2A NFC LED 3 LED 1 5 T 40 1 3 4 20 FCC 2 15 1 FCC 15 2 1 2 PowerWave A2595 25 26 5350 2019 5 3 1) 2) IC RF 20 A2595 AC T 2 12 11 10 9 5 NFC 27 28

. 40C

, A2595 Anker Innovations Limited ,

.EU/2011/65- EU/2014/53

/https://www.anker.com 9V 2.67A / 12V 2A 5W / 7.5W / 10W / 11W

. Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

TR: Mteri Hizmetleri JP:

KO:

AR :HE EN: 18-month limited warranty* | DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses* | FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi* | PT: 18 meses de garantia limitada RU: 18 | TR: 18 aylk snrl garanti

) | KO:

JP:

18 :HE | 18 :AR

: 18 18

: 18 EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono inuenzati dalle garanzie concesse dalla presente Garanzia limitata. 29 30 EN: Lifetime technical support | DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida | FR: Support technique vie IT: Assistenza post-vendita a vita | PT: Suporte tcnico ao longo da vida til do produto RU:

TR: mr boyu teknik destek JP: | KO:

support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30 (GMT+4)

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30 (GMT+4)

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30 (GMT+3)

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30 (GMT+3)

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30 (GMT+2)

@Anker

@Anker Japan

@Anker Deutschland

@AnkerOfficial

@Anker_JP

@anker_official

@anker_jp 31

- ANKER -

A2595

) BA SARs Model /ma#: A2595 FCC ID: 2AOKB-A2595 IC: 23451-A2595 SN: 1234567890123456 BITE: Dylan Atle]: 20200108 PowerWave Sense 2-in-1 Stand with Watch Charging Cable Holder M Joon, Hong Kong, Vel ae PANGS A2595 Se eee to ee. Model / Sh#: A2595 FCC ID: 2AOKB-A2595 IC: 23451-A2595 a3 SN: 1234567890123456 pa amel essa snenes AII{E: Dylan eects | Aya]: 20200108 Command Room 1318-19, Hol This device come conditions:(1)This d , im Tcucucieca rece Mie ean cour ae ala at RP TieKelear}

C5266091_X10_Ed.2 Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/7/2021 Subject: Request for Confidentiality FCC ID: 2AOKB-A2595 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: louis Qi Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Anker Innovations Limited Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: PowerWave Sense 2-in-1 Stand with Watch Charging Cable Holder Model Number: A2595 FCC Identifier: 2AOKB-A2595 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 6/7/2021 Title:

Signature of applicant:

1/1