FCC ID: 2AOKB-A2596 PowerWave Sense 2-in-1 Station

For FAQs and more information, please visit:

anker.com/support

@anker_official

@anker_jp

@Anker Deutschland

@Anker Japan

@Anker

@AnkerOfficial

@Anker_JP Product Number: A2596 51005002836 V01 English Deutsch Espaol Franais Italiano Portugus P Trk 01 06 09 12 15 18 21 24 26 28 31 33 35 39 EN LED Indicators Status Solid for 3 seconds, then turns off Connected to power Solid blue Charging your devices or fully charged Flashing blue Detected metal objects Overvoltage or undervoltage protection Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter T You cannot charge your device wirelessly when using an ultra-thick (>4 mm) protective phone case or a case with a pop socket. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 35C / 95F. 01 Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. For the safest and fastest charge, use original or certified cables. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and 02 receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator

& your body. Product Name: PowerWave Sense 2-in-1 Station Model: A2596 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and 03 operated with minimum distance 10cm between the radiator and your body. This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-003(B). Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2596 is in compliance with Directives 2014/53/EU & 2011/65/

EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2596 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:

https://www.anker.com Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom 04 This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. Specifications Input Output 5V 3A / 9V 2.67A 10W Max +5W Max Operating Temperature

-10 C - 40 C Radiated H-Field

-43.812dB A/m(@10m) TX/RX Frequency Range 110-205KHz (only for EU and UK) This product complies with the radio interference requirements of the European Community. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. DE LED-Anzeigen Status Leuchtet 3 Sekunden lang, geht dann aus Mit der Stromversorgung verbunden Leuchtet blau Ihr Gert wird aufgeladen oder ist vollstndig aufgeladen Blinkt blau Metallobjekte erkannt berspannungs- oder Unterspannungsschutz Nicht kompatibler AC-Adapter angeschlossen, zeigt an, dass Sie zu einem Quick Charge 2.0/3.0- oder Power Delivery-Netzteil wechseln mssen T Sie knnen Ihr Gert nicht drahtlos aufladen, wenn Sie eine ultradicke (> 4 mm) Schutzhlle oder eine Schutzhlle mit Sockel/Griff verwenden. Schlieen Sie das kabellose Ladegert an einen Quick Charge 2.0/3.0- oder Power Delivery-Wandadapter an. Schlieen Sie das Gert nicht an ein 5 V/1 A-Wandladegert oder einen USB-Anschluss eines Computers an, da dies die Funktion zum kabellosen Aufladen beeintrchtigen kann. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallpads an einer Kfz-Halterung, Magnetkarten, Trschlssel, Mnzen, NFC-Karten oder andere Metallgegenstnde, da diese das kabellose Ladegert mglicherweise entmagnetisieren, die Ladegeschwindigkeit beeintrchtigen oder eine berhitzung verursachen knnen. 05 06 Technische Daten Leistungsaufnahme 5V 3A / 9V 2.67A Ausgang 10 W Max +5 W Max Betriebstemperatur

-10 C - 40 C Abgestrahltes H-Feld dBuA/m (@10m)

-43.812 TX/RX-Frequenzbereich 110-205kHz (nur EU und UK) Dieses Produkt erfllt die Anforderungen der Europischen Gemeinschaft an Funkstrungen. Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen verringern die Ladegeschwindigkeit und schrnken die Leistung ein. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 35 C/95 F aufladen. Wichtige Sicherheitshinweise Lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. Nicht fallen lassen. Nicht auseinanderbauen. Keinen Flssigkeiten aussetzen. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Offene Flammen wie z. B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Fr das sichere und schnellste Aufladen verwenden Sie Originalkabel oder zertifizierte Kabel. Konformittserklrung Anker Innovations Limited erklrt hiermit, dass Produkttyp A2596 die Richtlinien 2014/53/EU und 2011/65/EU erfllt. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar:

https://www.anker.com/

07 08 ES Indicadores LED Estado Fijo durante 3 segundos, a continuacin se apaga Conectado a la fuente de alimentacin Azul fijo Cargando dispositivos o completamente cargados Azul intermitente Objetos metlicos detectados Proteccin contra sobretensin o baja tensin Adaptador de CC incompatible conectado; indica que se debe cambiar a un adaptador Quick Charge 2.0/3.0 o Power Delivery T No es posible cargar el telfono de forma inalmbrica si tiene puesta una funda protectora gruesa (> 4 mm) o un popsocket. Conecte el cargador inalmbrico a un adaptador de Quick Charge 2.0/3.0 o Power Delivery. No lo conecte a un cargador de pared de 5V/1A ni a un puerto USB de ordenador, ya que puede afectar a la funcin de carga inalmbrica. No coloque ningn objeto extrao entre su dispositivo y la superficie del cargador inalmbrico, incluyendo almohadillas metlicas de soportes para automvil, tarjetas magnticas, llaves de puertas, monedas, tarjetas NFC u otros objetos metlicos, ya que podran desmagnetizar el cargador inalmbrico y afectar a la carga, a la velocidad o provocar un sobrecalentamiento.Los cargadores inalmbricos proporcionan mayor comodidad que los cargadores con cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que estos. Las temperaturas elevadas reducen la velocidad de carga y limitan la potencia. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 35 C. 09 Instrucciones de seguridad importantes Consulte la informacin elctrica y de seguridad en la parte inferior antes de instalar o utilizar el producto. Evite que el dispositivo sufra cadas. No desmonte el dispositivo. No exponga el dispositivo a lquidos. Este producto solo es adecuado para climas moderados. La temperatura ambiente mxima durante el uso del producto no debe superar los 40 C. No coloque fuentes de llama abierta, como velas, sobre este producto. Utilice nicamente un pao seco o un pincel para limpiar el producto. Para disfrutar de una experiencia de carga ms rpida y segura, utilice cables originales o certificados. Declaracin de conformidad Por la presente, Anker Innovations Limited declara que este producto tipo A2596 cumple con las Directivas 2014/53 UE y 2011/65/UE. El texto completo de la declaracin de conformidad EU est disponible en la siguiente direccin de Internet:

https://www.anker.com/

Especificaciones Entrada Salida Temperatura de funcionamiento 5V 3A / 9V 2.67A 10W mx +5W mx

-10 C - 40 C Campo H de radiacin Rango de frecuencias TX/

RX dBuA/m (@10m)

-43.812 110-205kHz (solo para EE.UU. y Reino Unido) 10 Este producto cumple con los requisitos de radiointerferencias de FR la Comunidad Europea. Este smbolo indica que el producto no puede desecharse junto con los residuos domsticos. En su lugar, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos elctricos y electrnicos. Voyants LED tat Fixe pendant 3 seconde, puis steint Connect lalimentation Bleu fixe Charge de votre appareil en cours ou chargement termin Bleu clignotant Objets mtalliques dtects Protection contre la surtension,lusure ou la sous-tension Adaptateur secteur incompatible connect, indiquant que vous devez passer un adaptateur Quick Charge 2.0/3.0 ou Power Delivery T Vous ne pouvez pas charger votre appareil sans fil lorsque vous utilisez un tui de protection pour tlphone ultra pais

(> 4 mm) ou un tui avec support poigne. Connectez le chargeur sans fil un adaptateur mural Quick Charge 2.0/3.0 ou Power Delivery. Neffectuez pas le raccordement un chargeur mural 5V/1A ou un port USB dun ordinateur car cela pourrait affecter la fonction de charge sans fil. Ne placez aucun objet tranger entre votre appareil et la surface du chargeur sans fil, y compris les plaques mtalliques des supports pour voiture, les cartes magntiques, les cls, les pices de monnaie, les cartes NFC ou tout autre objet mtallique, car ils pourraient potentiellement dmagntiser le chargeur sans fil, rduire la vitesse de charge ou provoquer une surchauffe. Les chargeurs sans fil facilitent le chargement compars aux versions filaires traditionnelles. Nanmoins, restreinte par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. 11 12 Les tempratures leves rduiront la vitesse de chargement et limiteront la puissance. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 35 C. Consignes de scurit importantes Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou dutiliser le produit.Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Ce produit est adapt uniquement aux climats temprs. La temprature ambiante maximale pendant lutilisation de ce produit ne doit pas dpasser 40 C. Ce produit ne doit pas tre expos des sources de flamme nue telles que les bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. Afin de garantir un chargement plus rapide et plus sr, utiliser les cbles dorigine ou des cbles certifis. Dclaration d'Industrie Canada Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 cm entre le radiateur et votre corps. Dclaration de conformit Par la prsente, Anker Innovations Limited dclare que ce produit de type A2596 est conforme aux Directives 2014/53/EU et 2011/65/EU. Le texte intgral de la dclaration de conformit pour lUE est disponible ladresse internet suivante :

https://www.anker.com/

Spcifications Entre Sortie Temprature de fonctionnement Champ H rayonn 5V 3A / 9V 2.67A 10 W maximum +5 W maximum

-10 C - 40 C dBuA/m (@10m)

-43.812 110 205 KHz (uniquement pour lUE et le Royaume-Uni) Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. Gamme de frquence TX/

RX RSS-Gen numro 5 mars 2019 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. 13 Ce produit est conforme aux exigences de la Communaut europenne en matire dinterfrences radio. Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. 14 IT Indicatori LED Stato Fisso per 3 secondi, poi si spegne Collegato all'alimentazione Blu fisso Ricarica dei dispositivi in corso o ricarica completata Blu lampeggiante Oggetti metallici rilevati Protezione da sovratensione o sottotensione stato collegato un adattatore CA incompatibile, a indicare che necessario passare a un adattatore Quick Charge 2.0/3.0 o Power Delivery T Non possibile ricaricare il dispositivo in modalit wireless quando si utilizza una custodia protettiva ultra spessa (pi di 4 mm) o una custodia con una presa esterna. Collegare il caricabatterie wireless a un adattatore a muro Quick Charge 2.0/3.0 o Power Delivery. Non collegare a un caricatore a muro 5V/1A o a una porta USB su un computer in quanto potrebbe influire sulla funzione di ricarica wireless. Non posizionare oggetti estranei tra il dispositivo e la superficie del caricabatterie wireless, inclusi cuscinetti metallici su un supporto per auto, schede magnetiche, chiavi di porte, monete, schede NFC o altri oggetti metallici, poich potrebbero potenzialmente smagnetizzare il caricabatterie wireless, influenzare la velocit della ricarica o causare surriscaldamento. I caricabatterie wireless rendono la ricarica pi pratica rispetto a quelli cablati. Tuttavia, a causa dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore. Le alte temperature ridurranno la velocit di ricarica e la potenza. Si consiglia di ricaricare il dispositivo in ambienti con temperature inferiori a 35C. 15 Istruzioni importanti per la sicurezza Fare riferimento alle informazioni elettriche e di sicurezza sul fondo prima di installare o utilizzare il prodotto.Non smontarlo. Non lasciar cadere il prodotto. Non smontarlo. Non esporlo a liquidi. Il prodotto adatto allutilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40C. Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzolina. Per effettuare la ricarica in modo rapido e sicuro, utilizzare cavi originali o certificati. Dichiarazione di conformit Con la presente, Anker Innovations Limited dichiara che il tipo di prodotto A2596 conforme alle Direttive 2014/53/EU & 2011/65/EU. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.anker.com/

Specifiche Ingresso Uscita 5V 3A / 9V 2.67A 10 W max +5 W max Temperatura di esercizio

-10 C - 40 C Campo magnetico radiato dBuA/m (@10m)

-43.812 Gamma di frequenza TX/RX 110-205KHz (solo per EU e UK) 16 Questo prodotto conforme ai requisiti della Comunit europea PT-BR relativi alle interferenze radio. Questo simbolo indica che il presente prodotto non deve essere trattato come rifiuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. LEDs indicadores Status Slido por 3 segundos, apagando em seguida Conectado alimentao Azul slido Carregando seus dispositivos ou totalmente carregados Piscando em azul Objetos de metal detectados Proteo contra sobretenso ou subtenso Adaptador CA incompatvel conectado, indicando que necessrio trocar para um adaptador Quick Charge 2.0/3.0 ou Power Delivery T No possvel carregar seu dispositivo sem fio ao usar um case protetor de telefone ultraespesso (> 4 mm) ou um case com soquete pop. Conecte o carregador sem fio a um adaptador de parede Quick Charge 2.0/3.0 ou Power Delivery. No conecte a um carregador de parede de 5 V/1 A ou a uma porta USB de um computador, pois isso poder afetar a funo de carregamento sem fio. No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fio, incluindo pads de metal em um suporte para carro, cartes magnticos, chaves de portas, moedas, cartes NFC ou outros objetos de metal, pois eles podem desmagnetizar o carregador sem fio e afetar a velocidade de carregamento ou causar superaquecimento. 17 18 Os carregadores sem fio tornam o carregamento mais conveniente do que os carregadores com fio, mas limitados pela tecnologia sem fio existente, sua velocidade de carregamento mais lenta do que a dos carregadores com fio. Temperaturas elevadas reduziro a velocidade de carregamento e restringiro a potncia. Recomenda-se carregar seu dispositivo em ambientes com temperaturas abaixo de 35 C / 95 F. Instrues de segurana importantes Consulte as informaes eltricas e de segurana na parte inferior antes de instalar ou operar o produto. Evite quedas. No desmonte. No exponha a lquidos. Este produto adequado apenas para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes de chama aberta, como velas, no devem ser colocadas sobre este produto. Use apenas um pano seco ou escova para limpar este produto. Declarao de conformidade Para carregar com rapidez e segurana, use cabos originais ou certificados para uso. Declarao de conformidade A Anker Innovations Limited declara por meio desta que o tipo de produto A2596 est em conformidade com as Diretivas 2014/53/UE e 2011/65/UE. O texto completo da declarao de conformidade da UE est disponvel no seguinte endereo de Internet:

https://www.anker.com/

19 Especificaes Entrada Sada 5V 3A / 9V 2.67A 10 W mx. +5 W mx. Temperatura operacional

-10 C - 40 C Campo H radiado

-43.812 dBuA/m (a 10 m) Faixa de frequncia de transmisso/recepo 110 205KHz (somente para UE e Reino Unido) Este produto atende aos requisitos de interferncia de rdio da Comunidade Europeia. Este smbolo indica que este produto no deve ser tratado como lixo domstico. Em vez disso, ele deve ser entregue no ponto de coleta aplicvel para a reciclagem de equipamentos eltricos e eletrnicos. 20 RU 3

, Quick Charge 2.0/3.0 Power Delivery. T

(> 4 )

. Quick Charge 2.0/3.0 Power Delivery.

, 5 1 USB-

. 21

, , , NFC

. 35 C. 40 C.

. A2596 Anker Innovations Limited

, 2014/53/EU 2011/65/EU. 22 https://www.anker.com/

5 3A / 9 2.67A 10 + 5

-10 C - 40 C Sabit mavi

-43.812

10

) Mavi yanp snyor 110205 (

. T

. TR LED Gstergeler Durum 3 saniye boyunca sabit, sonra kapanyor G kna bal Cihazlarnz arj ediliyor veya arj ilemi tamamland Metal cisimler algland Yksek gerilimveya dk gerilim korumas Uyumsuz AC adaptr bal, bir Quick Charge 2.0/3.0 veya Power Delivery adaptr kullanmanz gerektiine iaret eder Ekstra kaln (>4 mm) koruyucu telefon klf veya tutuculu klf kullanrken cihaznz kablosuz olarak arj edemezsiniz. Kablosuz arj cihazn bir Quick Charge 2.0/3.0 veya Power Delivery duvar adaptrne balayn. Kablosuz arj ilevini etkileyebileceinden, 5 V/1 A duvar arj cihazna veya bilgisayardaki bir USB balant noktasna balamayn. Cihaznz ile kablosuz arj cihaznn yzeyi arasna, araba tutucusu zerindeki metal pedler, manyetik kartlar, kap anahtarlar, bozuk paralar, NFC kartlar veya dier metal cisimler dahil herhangi bir yabanc cisim koymayn; bunlar kablosuz arj cihaznn manyetik zelliini bozabilir, arj hzn olumsuz etkileyebilir veya ar snmaya neden olabilir. Kablosuz arj cihazlar, arj ilemini kablolu arj cihazlarndan daha kolay hale getirir, ancak mevcut kablosuz teknolojisiyle snrl olduklarndan tr arj hzlar kablolu arj cihazlarndan daha yavatr. Yksek scaklklar arj hzn drecek ve gc kstlayacaktr. Cihaznz 35 C/95 F'nin altndaki ortamlarda arj etmeniz nerilir. 23 24 nemli Gvenlik Talimatlar rn kurmadan veya altrmadan nce ltfen aadaki elektrik ve gvenlik bilgilerine bakn. Drmeyin. Paralara ayrmayn. Svlara maruz brakmayn. Bu rn yalnzca lman iklim koullarnda kullanm iin uygundur. Bu rnn kullanm srasnda maksimum ortam scakl 40 C'yi gememelidir. Mum gibi ak alev kaynaklar bu rnn zerine yerletirilmemelidir. Bu rn temizlemek iin yalnzca kuru bir bez veya fra kullann. En gvenli ve hzl arj iin orijinal ve sertifikal kablolar kullann. Uygunluk Beyan Anker Innovations Limited, ibu belge ile A2596 rn tipinin 2014/53/

EU ve 2011/65/EU Ynergelerine uygun olduunu beyan eder. AB uygunluk beyannn tam metni aadaki internet adresinde mevcuttur:

https://www.anker.com/

Teknik zellikler GR k 5V 3A / 9V 2.67A 10 W Maksimum +5 W Maksimum alma Scakl

-10-40 C Iyan Manyetik Alan -43.812 dBA/m(10 metrede) TX/RX Frekans Aral 25 110 - 205 KHz (yalnzca AB ve ngiltere iin) Bu rn, Avrupa Topluluu'nun radyo paraziti gerekliliklerine uygundur. Bu sembol, bu rnn evsel atk olarak ilem grmemesi gerektiini belirtir. Bunun yerine, elektrikli ve elektronik ekipmanlarn geri dnm iin geerli toplama noktasna teslim edilmelidir. JP LED 3 AC Quick Charge 2.0/3.0 Power Delivery 26 T

( : 4mm ) Quick Charge 2.0/3.0 Power Delivery AC 5V/1A AC USB

NFC 35 C 40

( ) 27 5V 3A / 9V 2.67A 10W + 5W

-10 C 40 C KO LED 3 AC , Quick Charge 2.0/3.0 Power Delivery 28 T 4mm

. Quick Charge 2.0/3.0 Power Delivery

. 5V/1A USB .

, , , , NFC

. 35 C/95 F

. Anker Innovations Limited A2596 2014/53/

EU 2011/65/EU . EU

. https://www.anker.com/

5V 3A / 9V 2.67A 10W + 5W

-10-40 C H-

-43.812dB A/m(@10m) TX/RX 110-205KHz(EU UK )

. 40 C

. 29 30 LED 3 40 C Quick Charge 2.0/3.0 Power Delivery 5V 3A / 9V 2.67A 10W + 5W T

> 4 Quick Charge 2.0/3.0 Power Delivery 5V/1A USB NFC 35 C

/ 95 F

-10-40 C

-43.812dB A/m(@10m)

/ 110-205KHz 31 32 5V 3A / 9V 2.67A 10W + 5W

-10-40 C

-43.812dB A/m(@10m) TX/RX 110-205KHz ( ) T

(> 4 mm)

(Pop Socket) Quick Charge 2.0/3.0 Power Delivery 5V/1A USB

NFC

) 35 C/95 F 40 C 33 34 LED 3 Quick Charge 2.0/3.0 T

. ) 4 >(

NFC

. 35

. 95 /

35

. 40

. 15

)1( : .)FCC(

)2(

.)FCC( 15 )(

)2( . )1(

36

)3( .

)4( . /

. 20 Anker Innovations Limited 610 1318-19

. Fantasia Trading LLC :

Ontario Mills Pkwy, Suite 100, Ontario, CA 5350 :

91764

+1 )800( 988 7973 :

. RSS - 216

. 2019 5 RSS-Gen

: . )1(

)2(

:)RF(

)IC(

20 . 37 Anker Innovations Limited

.EU/2011/65 EU/2014/53 A2596

/https://www.anker.com 2.67 9/ 3 5 5+ 10 40 -

-1 0

-43.812 dBA/m ) 10 (

/ ) ( 205 - 110

. 38 T

. )" > 4(

, 3

, Quick Charge Power Delivery 2.0/3.0 39 Quick Power Delivery Charge 2.0/3.0 5V/1A .

, USB

, NFC

. 35C-

. 40C-

. , 40 Anker Innovations Limited

.EU/2011/65- EU/2014/53 A2596

/https://www.anker.com A 2.67 V 9 / A 3 V 5 5W + 10W TX/RX 40 - -10

-43.812dBA/m)@10m(

( 110-205KHz

, . Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

TR: Mteri Hizmetleri JP: KO:

:AR :HE EN: 18-month limited warranty* | DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses* | FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi* | PT: 18 meses de garantia limitada RU: 18 | TR: 18 aylk snrl garanti JP: 18 () | KO:

18

: 18

18 :HE | 18 :AR

: 18 41

* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspflichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven 42 afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono influenzati dalle garanzie concesse dalla presente Garanzia limitata. EN: Lifetime technical support | DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida | FR: Support technique vie IT: Assistenza post-vendita a vita | PT: Suporte tcnico ao longo da vida til do produto RU:

TR: mr boyu teknik destek JP: | KO:

support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon-Fri 9:00 - 17:00 (PT)

(UK) +44 (0) 1604 936200 Mon-Sun 6:00 - 14:00

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30

(AU) +61 3 8331 4800 Mon-Fri 8:30 - 17:00 (AEST)

(TR) +90 0850 460 14 14 Mon-Fri 9:00 - 18:00

(RU) +8 (800) 511-86-23 Mon-Fri 9:00 - 18:00 (MSK)

9:00 - 17:30

) +86 400 0550 036

) 03 4455 7823

) +82 02-1670-7098 10:00 - 17: 00 9:00 - 17:00

43 44

出线方向

出线方向

居中对齐

27.9mm

居中对齐

适用国家：Overseas

A2596

镭雕

制作：hongbin

日期：20210427

版本：V1

C5266091_X10_Ed.2

Anker Innovations Limited

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046 Date: 7/19/2021

Subject: Request for Confidentiality

FCC ID: 2AOKB-A2596

To Whom It May Concern,

Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following

attachment(s) as confidential document from public disclosure.

Exhibits

ID Label/Location

Attestation Statement

External Photos

Block Diagram

Schematics

Test Report

Test Setup Photos

User’s Manual

Internal Photos

Parts List / Tune Up

RF Exposure Info

Operational Description

Cover Letter(s)

SDR Software / Security Info

Long-Term

Confidentiality

No

No

No

☒

☒

No

No

☐ NOTE 1

☐ NOTE 1

☐

No

☒

No

☐

Short-Term

Confidentiality NOTE 2

No

No

☒

☐

☐

No

☒

☒

☒

☐

No

☐

No

No

NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of

KDB 726920, use last in force)

NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant.

Above mentioned document contains detailed system and equipment description are

considered as proprietary information in operation of the equipment. The public

disclosure of above documents might be harmful to our company and would give

competitor an unfair advantage in the market.

In case of short-term Confidentiality, the applicant requests the exhibits selected above

are withheld from public view for a period of __180____ days from the date of the Grant

of Equipment Authorization and prior to marketing.

It is our understanding that all measurement test reports, FCC ID label format and

correspondent during certification review process cannot be granted as confidential

documents and those information will be available for public review once the grant of

equipment authorization is issued.

1/1

C5266091_X10_Ed.2

Sincerely,

Signature:

Name: louis Qi

Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Anker Innovations Limited Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: PowerWave Sense 2-in-1 Station Model Number: A2596 FCC Identifier: 2AOKB-A2596 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 7/19/2021 Title:

Signature of applicant:

1/1