PRODUCT OVERVIEW CHARGING SOLOCAM LED Indicator MOUNTING SOLOCAM Select a Location S220 SoloCam can be mounted on a wall. Select a location where it achieves the desired view. We recommend mounting it 7-10 ft
(2-3 m) above ground level. To maximize the solar panel efficiency, select a location where S220 SoloCam receives plenty of sunlight. Mount S220 SoloCam S220 SoloCam can be mounted both indoors and outdoors. 1. Loosen the cover of the mount by turning it counterclockwise and disassemble the mount. 3. Firmly screw the base of the mount onto the wall. Reassemble the mount. CUSTOMER SERVICE 12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960 QUICK START GUIDE S220 SoloCam T8134 S220 SoloCam Solar Panel Photosensitive Sensor Microphone Camera Lens LED Indicator Motion Sensor Speaker SYNC Button USB-C Charging Port Mounting Hole Charging Fully Charged Solid Blue Off SETTING UP SOLOCAM Download the App and Set Up the Device 1. Download and install the eufy Security app, and sign up for an account. Camera Field of View 10 t f 0 1
7
) m 3
2
Motion Detection Zone 2. Follow the on-screen instructions to add your SoloCam. Up to 26 ft (8 m) 2. This step applies if mounting onto hard surfaces such as brick or concrete. For soft surfaces such as wood, skip this step. Drill holes with a 15/64 in (6 mm) drill bit, then insert the anchors into the holes. 4. Screw SoloCam onto the mount. Ensure the solar panel is facing the sky. Position SoloCam to achieve the desired view, checking it using the live stream in the eufy Security app.
) +86 400 0550 036
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 42428633 support@eufylife.com Anker Innovations Limited 01 02 03 04 05 06 For troubleshooting, check the Help section in the eufy Security app. Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial Attention:
-Le remplacement dune batterie par un type incorrect peut contourner les protections et crer un danger ;
-Llimination dune pile dans un feu ou une autre source de chaleur importante, ou par crasement ou dcoupage, peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;
-Le fait de laisser une batterie dans un environnement extrmement chaud peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;
-Une batterie soumise une pression dair extrmement faible peut provoquer une explosion ainsi quune fuite de liquides et de gaz inflammables. SAFETY The recommended temperature range for devices and accessories is -20C to 50C (-4F - 122F). Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. It is recommended to supply the device in an environment with a temperature that ranges from 5C ~ 25C. When supplying, please place the device in an environment that has a normal room temperature and good ventilation. CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. ATTENTION!
IL EXISTE UN RISQUE DEXPLOSION EN CAS DUTILISATION DUN TYPE DE PILE INCORRECT.LIMINEZ LES PILES USAGES CONFORMMENT AUX INSTRUCTIONS. Warning:
Replacing a battery with an incorrect type may bypass safeguards and create danger;
Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20 cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. Declaration of Conformity This product complies with the radio interference requirements of the European Community. This product complies with the radio interference requirements of the European Community. Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Wi-Fi Operating Frequency Range: 2412~2472MHz;
Wi-Fi Max Output Power:19.65 dBm The following importer is the responsible party (contact for EU matters only) Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany This product complies with the radio interference requirements of the United Kingdom Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com. Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. 07 08 09 10 11 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005003795 V01