FCC ID: 2AOKB-T87B2 SmartTrack Card

QUICK START GUIDE SmartTrack Card KURZANLEITUNG GUA DE INICIO RPIDO GUIDE DE DMARRAGE RAPIDE GUIDA RAPIDA SNELSTARTGIDS GUIA DE INCIO RPIDO Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. Please visit https://support.eufylife.com/s/ or scan the QR code for more information. 51005003623 V01 www.ankerjapan.com

(QR ) Model: T87B2 English At a Glance Button Buzzer Metal Clip Lithium Battery Double-Sided Tape Activating for the First Time 1. Download and install the eufy Security app and sign up or log in. 2. Follow the on-screen instructions to add your SmartTrack Card to the device list. EN 01 2. Stick SmartTrack Card to the metal clip with the provided double-

sided tape, then clip it to any items you want to keep track of. Use with Apple's Find My App (Apple Users Only) To add your SmartTrack Card to the Find My app:

1. Open the Find My app, tap +, then tap Add Other Item. 2. Press and hold the button on your SmartTrack Card for two seconds until you hear a tone. 3. Follow the on-screen instructions to complete the setup. SmartTrack Card Location Suggestions 1. Place SmartTrack Card in your wallet. 02 EN EN 03 ENGLISH SAFETY The recommended temperature range for devices and accessories is 0C to 50C (32F-122F). Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. CAUTION!

THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. CAUTION!

THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. Warning:

Replacing a battery with an incorrect type may bypass safeguards and create danger;

Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;

Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;

A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. Warning:

Replacing a battery with an incorrect type may bypass safeguards and create danger;

Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;

Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;

A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005003622 V01 NOTICE Trademarks Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Watch, iPad, iPadOS, iPod touch, Mac, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners. Notice (Europe and United Kingdom) This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the Web site: https://uk.eufylife.com. This product complies with the radio interference requirements of the United Kingdom Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com . RF exposure information:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. The min separation distance is 0cm. Frequency bands and power as below:

Bluetooth Operation Frequency: 2402-2480MHz; Bluetooth Max. Power: 2.69 dBm The following importer is the responsible party (contract for EU matters):

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK matters):

Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Notice (United States Of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address:10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone:1-800-988-7973 Notice (Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1. l'appareil nedoit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. The min separation distance is 0cm.

T87B2 USUEJP

/Cool GrayGray11C

/Cool GrayGray11C 11.1MM :

https://sus.eufylife.com/h?s=UFYHXreYvxh-

pvcoM Bergling.Jin PM V5 2022.08.25 SmartTrack Card

Anker Innovations Limited Agent Authorization Letter

(10/13/2022) RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, authorize Micom Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This agreement expires one year from the current date. Sincerely, Louis Qi/Manager Company Name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AOKB-T87B2 Date: 2022-10-13 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Title: Manager