User Manual Soundcore Infini Soundbar A3371 FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital d evice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential installation. This equipment generates use s and can radiate radio frequency energy and, if not installed and used in accordance with the i nstructions, may cause harmful interference to radio communications. However, there is no gua rantee that interference will not occur in a particular installation. If this equipment does cause h armful interference to radio or television reception, which can be determined by turning the equi pment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviro nment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two co nditions: (1) This device may not cause harmful interference, and (2) this device must accept an y interference received, including interference that may cause undesired operation. IC Caution This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
" ce matriel est conforme aux limites d'exposition aux rayonnements rf de ic noncs dans un autre environnement. ce matriel doit tre install et exploit une distance minimale de 20 cm entre le radiateur et votre corps. "
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
- French:
Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. Safety Instructions Avoid dropping. Do not disassemble. Do not submerge in water. Avoid extreme temperatures. Do not use the device outdoors during thunderstorms. Use original or certified cables. Do not use any corrosive cleaner / oil to clean. 8. The product should not be exposed to dripping or splashing water. Whats Included Soundbar Power cord Remote control AAA Batteries 3.5mm to RCA audio cable Optical cable Wall mounting brackets 8. Wall mounting bolts 9. User manual 10. Wall mounting template At a Glance Status indicator Status Status indicator light Standby Optical Coaxial Aux in Solid red Solid green (stays on for 10 seconds) Solid orange (stays on for 10 seconds) Solid cyan (stays on for 10 seconds) Bluetooth pairing mode Flashing blue Bluetooth device connected Solid blue (stays on for 10 seconds) Volume up and down Flashing white Maximum volume Solid white (stays on for 10 seconds) Minimum volume Solid white (stays on for 10 seconds) Music equalizer mode Flashing white (once) Movie equalizer mode Flashing white (2 times) Dialogue mode Solid white (stays on for 5 seconds) Mute Solid yellow Power button Volume-down control Volume-up control Source input button Wall mounting screw holes Power input Service port 9. Aux input 10. Optical input 11. Coaxial Note: Press source input button and hold for 3 seconds to activate Bluetooth pairing mode. Placement Table Placement 1. Place the soundbar on a solid surface. Wall mount Installation Step 1: Insert two wall mounting screws into the wall mounting screw holes, then fasten the screws. Step 2: Place the wall mounting template against the wall, under your TV. Mark the 4 bracket holes on the wall with a pencil. Step 3: Fix the two mounting brackets on the wall according to the center points. Use bolts
(not included) to secure the brackets. Step 4: Hang the soundbar on the brackets. Remote Control 1. Battery installation 2. Remote control buttons Button Button functions Power button Press to switch on / off the soundbar. Volume-up control To increase the volume. Previous Return to previous track. Play / Pause To pause / resume playback. Bluetooth button To activate Bluetooth mode. 1. Press to activate Bluetooth mode. 2. Press and hold for 3 seconds to reconnect. Dialogue mode button Music equalizer button Mute button To activate the dialogue mode. To activate the music equalizer mode. To temporarily turn off the sound. Press the button again to turn the sound back on. 9. Next Move to next track. 10. Volume-down control To decrease the volume. 11. Source input button To change source input. Press this button for 3 seconds to activate Bluetooth pairing mode. 12. Movie equalizer button To activate the movie equalizer mode. Note: The status indicator light will stay on for approximately 10 seconds when the soundbar is in Bluetooth mode / Aux in mode / Optical mode / Coaxial mode. Using Your Soundbar 1. Turn On / Off Note: The soundbar will automatically switch to standby mode when no audio input is received for over 30 minutes. The soundbar will wake up from standby mode when any button is pressed or source input is received. a. Connect to your TV 1. You can use optical cable, coaxial cable or 3.5mm to RCA audio cable to connect to the respective output port of your TV. 2. Press the source input button on the soundbar or remote control to activate the corresponding mode.The status indicator will be solid green in optical mode, orange in coaxial mode and cyan in Aux mode. Note: The status indicator light will stay on for 10 seconds. Note: Not all TVs have the audio outputs shown as above, please check your TV's specifications before setup. Note: Try set the TV output to PCM if there is no audio sound when using either of the optical or coaxial inputs. Note: Coaxial cable is not included. b. Connect to other devices 1. You can use optical cable / coaxial cable or 3.5mm to RCA audio cable, or 3.5mm to 3.5mm cable (not included) to connect to the respective output port of other devices
(such as Blu-ray player, game console, tablet, MP3 Player / laptop etc). 2. Press the source input button on the soundbar or remote control to activate optical, coaxial or Aux mode. The status indicator will be solid green in optical mode, orange in coaxial mode and cyan in Aux mode. Note: The status indicator light will stay on for 10 seconds. Note: Follow your device's user manual if you want to connect the soundbar to your other devices (such as Blu-ray player, game console, tablet, MP3 Player /
laptop...etc).. Note: 3.5mm to 3.5mm cable is not included. c. Bluetooth mode 1. Press power button on the remote control to switch on the soundbar. 2. Press the Bluetooth button on the remote control to activate Bluetooth pairing mode. 3. Turn on the Bluetooth of your device, search for Soundcore Infini on your Bluetooth list then select connect. 4. Flashing blue Solid blue Bluetooth mode is activated Connected to device Note: The status indicator light will stay on for 10 seconds. When turned on, Soundcore Infini will automatically connect to the last connected device if available. If not, press and hold the Bluetooth button (or source input button) for 3 seconds on the remote control or press the source input button on the soundbar for 3 seconds to activate Bluetooth mode. Having connection problems? Remove Soundcore Infini from your devices Bluetooth history and ensure its less than 10 meters away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your soundbar. When not in use, store your soundbar in a cool place. Declaration of Conformity Hereby, Anker Innovations Limited declares that the radio equipment type A3371 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/products Maximum output power: 0dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) Anker Innovations Limited / Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Specifications
*Specifications are subject to change without notice. Input Audio output Size Weight (without packaging) Bluetooth version Range Product Number A3371 Soundcore Infini Soundbar 100-240V~ 50/60Hz 0.5A 100 W 880 x 56 x 90 mm /
34.6 x 2.2 x 3.5 in 2.9 kg / 104 oz V4.2 10 m / 33 ft