Safety Instructions Whats Included At a Glance Connect Soundsync to a Bluetooth Device For FAQs and more information, please visit:
USER MANUAL Soundsync Bluetooth Transmitter Do not drop, knock, or shake the device. Do not disassemble. Do not attempt to open the device. Keep the device dry and away from all types of liquids or moisture that will corrode the electronic circuits. If the device gets wet, dry it immediately. Avoid extreme temperatures. Do not use outdoors during thunderstorms. Use original or certified cables only. Do not use any corrosive cleaner / oil to clean. The device should be charged at least once a month to preserve battery life. Soundsync Bluetooth Transmitter Anker Bluetooth Transmitter User Manual User Manual 3.5 mm Audio Adapter micro USB Cable 3.5 mm Audio Cable 1 Multi-function Button 5 Multipoint Connection LED Indicator 2 3 LED Indicator 3.5 mm AUX Input 4 Micro USB Charging Port 6 Volume Down 7 Volume Up Charge the Bluetooth Transmitter before first use. If Soundsync freezes, press and hold the multi-function button, insert the Micro USB cable to start charging, then restart Soundsync. LED Indicator Guide Flashing blue twice Flashing red twice Power on Power off Flashing red and blue alternately Bluetooth pairing mode Steady blue Connected to a device / Connected to two devices simultaneously Flashing blue once every 2 seconds Disconnected from a device Flashing blue once every second Reconnected to a device Steady blue (LED indicator and Multipoint connection LED indicator) Flashing red and blue alternately Pairing deleted Two devices are connected simultaneously 3S 3S Using Your Soundsync Turn on / off ON OFF Press and hold for about 3 seconds Press and hold for about 3 seconds 3S 3S 3S x2 3S 1. When Soundsync is turned on, press the multifunction button twice to enter Bluetooth pairing mode. The LED indicator will flash red and blue alternately. 2. Enable Bluetooth on your Bluetooth headphones or speaker and pair it with Soundsync. When successfully paired, the LED indicator will turn blue. 3. Connect Soundsync to your device using the provided 3.5 mm audio cable. Product Number: A8327 Soundsync Bluetooth Transmitter 5100500XXXX V01 f 01 f 02 f 03 f 04 f 05 f 06 Connect Soundsync to two devices at the same time If there is still no sound coming from your devices devices, turn off Soundsync and then reconnect two devices. If connection fails again, repeat the steps above. Charging Your Soundsync Specifications Operating temperature range 14F to 131F / -10C to 55 Range 10 m / 33 ft Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure Statement AUX mode Specifications are subject to change without notice. Declaration of Conformity 1. Follow the steps in the Connecting Soundsync to a Bluetooth device section to connect Soundsync to the first Bluetooth headphone or speaker. 2. Press the multifunction button twice to re-enter Bluetooth pairing mode. 3. Enable Bluetooth onthe second Bluetooth headphone or speaker and pair it with Soundsync. When successfully paired, the LED indicator and Multipoint connection LED indicator will turn blue simultaneously. 4. Connect Soundsync to your device using the provided 3.5 mm audio cable. Now you can listen to music from both Bluetooth headphones or speakers. Soundsync will automatically switch to AUX mode when a 3.5 mm audio cable is plugged in. Charging (When Soundsync is turned off) Flashing red Steady red Off Low battery Fully Charged DC input Battery capacity AUX playtime Charging time Bluetooth version Support format Supported codec 0.5A 5V 180mAh 12 hours 2 hours V5.0 A2DP AVRCP aptTMX Low Latency Use the included Micro USB cable to charge your Soundsync and make sure it is fully charged before first use. When not in use, store your Soundsync in a cool place. Size Weight (without packaging) aptTMX SBC 50 29 10 mm / 2.0 1.1 0.4 in 13.5g / 0.5oz Hereby, Anker Innovations Limited declares that the radio equipment type A8327 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com Maximum output power: 3.891 dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973 Anker Innovations Limited Hong Kong Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, f 07 f 08 f 09 f 10 f 11 f 12 f 13 f 14