QUICK START GUIDE Video Doorbell Slim (1080p, Battery-Powered) Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 5100500XXXX V01 TABLE OF CONTENTS Whats Included 01 09 Finding a Mounting Spot Product Overview 03 11 Mounting the Bracket How the System Works 04 14 Mounting the Doorbell Powering on the wi-fi Doorbell Chime 05 15 Detaching the Doorbell Setting up the System 07 16 Recharging the Doorbell Charging Your Doorbell 08 17 Notice WHATS INCLUDED For Video Doorbell Installation For Wi-Fi Doorbell Chime Installation Video Doorbell Slim Mounting Bracket Screw Hole Positioning Card 15 Mounting Wedge
(Optional)
(1080p, Battery-Powered) Model: T8220 FCC ID: 2AOKB-T8220 IC: 23451-T8220 Model: Wi-Fi Doorbell Chime FCC ID: 2AOKB-T8020 IC: 23452-T8020 QSG Note: Power plug may vary in different regions. USB Charging Cable Screw Packs (Spare screws and anchors are included) Doorbell Detaching Pin Quick Start Guide 01 English English 02 PRODUCT OVERVIEW Video Doorbell (Battery Powered) Front view:
1 2 3 4 5 6 7 1. Motion Sensor 2. Microphone 3. Camera Lens 4. Ambient Light Sensor 5. Status LED 6. Doorbell Button 7. Speaker Rear View:
1 2 3 1. Micro USB Charging Port 2. SYNC/RESET button 3. Detaching Mechanism Operation Power on Add doorbell to Wi-Fi Doorbell Chime How-to Press and release the SYNC button. Press and hold the SYNC button until you hear a beep. Power off the doorbell Quick-press the SYNC 5 times in 3 seconds. Reset the doorbell Press and hold the SYNC button for 10 seconds. 03 English HOW THE SYSTEM WORKS How the System Works The video doorbell system includes 2 parts:
The video doorbell at your door The Wi-Fi Doorbell Chime in your house The video doorbell detects motion at your porch and allows you to answer the door anytime and anywhere. The Wi-Fi Doorbell Chime stores video clips on a microSD card (user provides it) and works as an indoor digital chime. When someone rings the doorbell, people in the house will be notified. Doorbell Chime Video Doorbell English 04 2. Extend Wi-Fi Doorbell Chimes antennas. STEP 1 POWERING ON THE WI-FI DOORBELL CHIME Connect the HomeBase 2 to the Internet 1. Fix the power connector to Wi-Fi Doorbell Chime. Place the power connector over Wi-Fi Doorbell Chime in the direction the Align the raised slots of the power connector with the notch on the base of arrows indicate. the doorbell chime. Rotate clockwise to lock the power connector in place. 1 2 3 3. Plug Wi-Fi Doorbell Chime into an AC power supply at your desired location. The LED indicator turns solid green when the doorbell chime is ready for setup. 05 English English 06 STEP 2 SETTING UP THE SYSTEM Download the App and Set up the System Download the eufy Security app from the App Store (iOS devices) or Google Play
(Android devices). STEP 3 CHARGING YOUR DOORBELL The doorbell comes with an 80% battery level for safe transportation. Fully charge it before mounting the doorbell at your front doorbell. Sign up a eufy Security account and follow onscreen instructions to complete the setup. Tap Add Device and add Doorbell Chime to the device list. Follow the onscreen instructions to connect Wi-Fi Doorbell Chime to your home WiFi. Tap Add Device and add Doorbell to the device list. Follow the onscreen instructions to connect the Doorbell to Wi-Fi Doorbell Chime. Note: The battery life varies depending on usage. In most common cases, a doorbell may have up to 15 events per day and each recording lasts 20 seconds on average. Under this scenario, the doorbell battery life can last up to 4 months. 6 months 07 English English 08 STEP 4 FINDING A MOUNTING SPOT Place the Screw Hole Positioning Card against the wall to mark the position. Find a Mounting Spot Take the Video Doorbell to your front door and check the live view on the eufy Security app at the same time. Find a position where you can get the desired field of view. Consider the below factors:
1. Check if you can reuse the existing holes and anchors on the wall or door frame. 2. 3. If you want to place the doorbell close to a side wall, make sure the wall doesnt show up in the field of view. Otherwise IR light will be reflected and night vision will become blurry. If you are drilling the mounting holes for the first time the recommended mounting height is 48" / 1.2m from the ground. 4. Use the 15 mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side. 1.76m(59) 1.2m (48") 1m
(40") 0.3m
(12") Door Video Doorbell Door Video Doorbell 15 Without 15 Mounting wedge With 15 Mounting wedge 09 English English 10 STEP 5 MOUNTING THE BRACKET Mount the Doorbell on a Wooden Surface If youre mounting the doorbell on a wooden surface, you dont need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The Screw Hole Positioning Card indicates the position of the screw holes. Mount the Video Doorbell on Surfaces Made Out of Hard Materials 1. If youre mounting the doorbell on a surface made out of hard materials, like brick, concrete, stucco, drill 2 holes through the Screw Hole Positioning Card with 15/64(6mm) drill bit. 2. Insert the provided anchors, and then use the provided long screws to secure the Mounting Bracket on the wall. What is required: Power Drill, Mounting Bracket, 15 Mounting Wedge
(Optional), Screw Packs What is required: Power Drill, 15/64(6mm) Drill Bit, Mounting Bracket, 15 Mounting Wedge (Optional), Screw Packs Phillips-Head Screwdriver
(User provides it.) Mounting Bracket
(Attached to 15 Mounting Wedge) 15 Mounting Wedge (Optional) Screw Packs (Spare screws and anchors are included.) Power Drill with 1/4" (6.35mm) Drill Bit Power Drill with
(User provides it.) 1/4" (6.35mm) Drill Bit
(User provides it.) 15/64(6 mm) Drill Bit Mounting Bracket
(Attached to 15 Mounting Wedge) 15 Mounting Wedge (Optional) Screw Packs (Spare screws and anchors are included.) 15/64(6 mm) Drill Bit Mounting Bracket
(Attached to 15 Mounting Wedge) 15 Mounting Wedge (Optional) Screw Packs (Spare screws and anchors are included.) 1 1 2 2 Wall Mounting Bracket Wall Mounting Wedge Mounting Bracket Without 15 Mounting Wedge With 15 Mounting Wedge 11 English Wall Mounting Bracket Without 15 Mounting Wedge Wall Without 15 Mounting Wedge English 12 2 STEP 6 MOUNTING THE DOORBELL Mount the Doorbell Align the doorbell on top and then snap it on the bottom. Wall Mounting Bracket Wall Mounting Wedge Mounting Bracket Without 15 Mounting Wedge With 15 Mounting Wedge Youre all set!
If you want to detach the doorbell or recharge it, please refer to the following sections. 13 English English 14 APPENDIX 1 DETACHING THE DOORBELL APPENDIX 2 RECHARGING THE DOORBELL 1. Use the doorbell detaching pin provided if you wish to detach the doorbell from Recharge the Doorbell 2. Press and hold the hole on the bottom of the doorbell and then lift its bottom to Charge the doorbell with universal USB chargers that deliver 5V 1A output. Detach the Doorbell the Mounting Bracket. take it off. What is required: Doorbell Detaching Pin Doorbell Detaching Pin LED indication Charging: Solid orange Fully charged: Solid blue Charging time 6 hours from 0% to 100%
15 English English 16 NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. FCC Radio Frequency Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541 Telephone: 1-800-988-7973 This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://www.eufylife.com/. This product can be used across EU member states. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for T8020 and accessories is 0C-40C. The suitable temperature for T8220 and accessories is -20C-50C. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5C~25C. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Wifi Operating Frequency Range: 2412~2472MHz (2.4G) Wifi Max Output Power: 19dBm (ERIP for T8020); 15dBm (ERIP for T8220) Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power:
8dBm (EIRP) The following importer is the responsible party (contact for EU matters only) Importer: Anker Technology (UK) Ltd Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This product is designed and manufactured with high quality materials and components, which can be recycled and reused. 17 English English 18 CUSTOMER SERVICE Warranty 12-month limited warranty
(UAE) +971 800320817 (Arabic & English) Local Time 9 am -5:30 pm (Sunday to Thursday)
(Kuwait) +965 22069086 (Arabic & English) Local Time 8 am - 4:30 pm (Sunday to Thursday)
(Saudi Arabia) +966 8008500030 (Arabic & English) Local Time 8 am - 4:30 pm (Sunday to Thursday) Customer Support: support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1)l'appareil nedoit pas produire de brouillage, et
(2)l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. 19 English