For FAQs and more information, please visit:
anker.com/support
@anker_official
@anker_jp
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOfficial
@Anker_JP Product Number: A2568 5100600XXXX V01 EN LED Indicators Status Solid white for 3 seconds, then turn off Connected to power Light up one by one, then turn off Charging your device Flash white Metal objects detected Only LED lights on the two sides flash white
- Overvoltage or undervoltage protection
- Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter T This wireless charger is not compatible with non-
Magsafe phone cases, such as Otterbox Defender cases. It is not advised to charge a phone on the earbuds charging area. When the angle between the phone charging part and the base is less than 40, the wireless earbuds charging function will turn off automatically for safety. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. 01 High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40C /
104F. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. 02 Wireless Charger
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. Product Name:
Model: A2568 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. 03 This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-
003(B). Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2568 is in compliance with Directives 2014/53/EU & 2011/65/
EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2568 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com 04 This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user s body and the product
. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2568 is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address:
https://www.anker.com/
Specifications Input Output 9V 3A / 12V 2A / 15V 2A 5W / 7.5W Operating Temperature Radiated H-Field
-10 C - 40 C 127.7kHz: -14.5 dBA/m (@10m) 110 kHz~205kHz: -10.6 dBA/m (@10m) TX/RX Frequency Range 110-205KHz (only for EU and UK) Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom CS LED kontrolky Stav Svt ble po dobu 3sekund, pak se vypnou Rozsvcuj se jedna po druh, pak se vypnou Pipojeno knapjen Nabjen vaeho zazen Blikaj ble Zjitny kovov pedmty Ble blikaj pouze LED svtla na dvou bonch stranch
- Ochrana proti pept nebo podpt
- Je pipojen nekompatibiln adaptr stdavho proudu. To znamen, e muste pepnout na adaptr Quick Charge 2.0/3.0 nebo Power Delivery T Tato bezdrtov nabjeka nen kompatibiln s pouzdry jinch znaek ne Magsafe, jako jsou pouzdra Otterbox Defender. Nedoporuuje se nabjet telefon voblasti nabjen sluchtek. Pokud je hel mezi nabjec st telefonu azkladnou men ne 40 , funkce bezdrtovho nabjen sluchtek se zbezpenostnch dvod automaticky vypne. Pipojte bezdrtovou nabjeku knstnnmu adaptru Quick Charge 2.0/3.0 nebo Power Delivery. Nabjeku nepipojujte k5V/1A nstnn nabjece nebo USB portu na potai, protoe tm mete ovlivnit funkci bezdrtovho nabjen. Mezi zazen apovrch bezdrtov nabjeky nepokldejte dn ciz pedmty, napklad kovov podloky drku do auta, magnetick karty, kle, mince, karty NFC nebo jin kovov pedmty, protoe by mohly bezdrtovou nabjeku demagnetizovat, ovlivnit rychlost nabjen nebo zpsobit peht. 05 06 Specifikace Vstup Vstup 9V 3A / 12V 2A / 15V 2A 5W/ 7,5W Provozn teplota Vyzaovan poleH Rozsah frekvenceTX/RX
-10 C - 40 C 127.7kHz: -14.5 dBA/m (@10m) 110 kHz~
205kHz: -10.6 dBA/m (@10m) 110205kHz (pouze pro EU aUK) Bezdrtov nabjeky umouj pohodlnj nabjen ne drtov nabjeky, ale jsou omezeny aktuln bezdrtovou technologi arychlost nabjen je pomalej ne udrtovch nabjeek. Vysok teploty sn rychlost nabjen aomez vkon. Doporuujeme zazen nabjet vprosted steplotou ni ne 35C. Dleit bezpenostn pokyny Ped instalac nebo pouvnm produktu si pette technick abezpenostn daje na spodn stran. Dvejte pozor, abyste zazen neupustili na zem. Zazen nerozebrejte. Nevystavujte kapalinm. Tento produkt je vhodn pouze pro pouit voblastech smrnm Maximln okoln teplota pi pouvn tohoto produktu nesm Na produkt neumsujte zdroje otevenho plamene, napklad klimatem. peshnout 40C. svky. Kitn produktu pouvejte pouze suchou ltku nebo kartek. Tento vrobek spluje poadavky Evropsk unie tkajc se interferenc rdiovch signl. Prohlen oshod Spolenost Anker Innovations Limited prohlauje, e produkt typu A2568 je ve shod se smrnicemi 2014/53/EU a2011/65/
EU. pln znn prohlen oshod pro EU je kdispozici na tto internetov adrese:
https://www.anker.com/
Tento symbol vyjaduje, e se stmto vrobkem nesm zachzet jako sdomovnm odpadem. Msto toho je nutn jej zanst do pslunho sbrnho msta pro recyklaci elektrickch aelektronickch zazen. 07 08