FCC ID: 2AOKB-A2583 Wireless Charger

A2583 - Safety Sheet - EN - 20210512 Charging Base Front LED Indicators Status Left LED Indicator Solid white for 3 seconds, then turns off Solid white Right LED Indicator Solid white for 3 seconds, then turns off Connected to power Charging your mobile phone Charging Base Solid white Charging your AirPods Flashing orange Incompatible AC adapter connected, indicating that you should switch to the supplied wall charger or a USB-C wall charger (45W or above) that supports Power Delivery Flashing white Metal object detected Rear LED Indicator Status Solid white for 10 seconds, then turns off Flashing orange Working normally Incompatible AC adapter connected, indicating that you should switch to the supplied wall charger or a USB-C wall charger (45W or above) that supports Power Delivery Incompatible AC adapter connected, indicating that you should switch to the supplied wall charger or a USB-C wall charger (45W or above) that supports Power Delivery To charge a low-power device with a current capacity of 80mA or less, press and hold (or double-press) the button on the portable charger for 2 seconds to activate the low-current charging mode. Use with the supplied wall charger only. Do not connect to a computer's USB port as it may affect the wireless charging function. Using an ultra-thick protective phone case or a case with a magnetic/metal plate is not recommended as it may affect the wireless charging function. Do not place any foreign objects between your smartphone and the wireless chargers surface, including metal pads on a car mount, credit cards, keys, coins, NFC cards or other metal objects, as it may cause overheating. Important Safety Instructions Please refer to the electrical and safety information before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. The socket-outlet shall be installed near the product and shall be easily accessible. Disconnection from line voltage should be made via the AC plug. When using this product, basic precautions should always be followed, including the following:

1) Store the product in a cool and dry place. 2) Do not store the product in a hot or humid environment. 3) Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. 4) Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. 5) If the product is not used for long periods of time, you should charge and discharge once every three months. 6) When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern. 7) Do not dispose of the product in heat or fire. 8) Do not clean the product with harmful chemicals or detergents. 9) Misuse, dropping, or excessive force may cause product damage. 10) When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

If this equipment does cause harmful interference in a residential Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. Product Name: Wireless Charger Model: A2583 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. transmitter(s)/receiver(s)

- English:

This device contains licence-exempt that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

- French:

Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Declaration of Conformity type A2583 is in Hereby, Anker compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

Innovations Limited declares that the product https://www.anker.com/

GB Declaration of Conformity Hereby, Anker type A2583 is in compliance with Radio Equipment Regulations 2017. The full text of the GB declaration of conformity is available at the following internet address:

Innovations Limited declares that the product https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential provisions of UKCA. All essential radio test suites have been carried out. requirements and other relevant Specifications Charging Base

Input 15V == 3A Output Wireless Output (TWS): 5W Max USB-C Output (for watch module only): 5W Pogo Pin Output: 15V==1.2A (18W Max) TX/RX frequency range 115-205KHz (only for FCC ID and IC Wall Charger Output 5V==3A / 9V==3A / 15V==3A / 20V==2.25A Product Number: A2583 Wireless Charger This product complies with the radio interference requirements of the European Community. Indoor use only This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Customer Service 18-month Limited Warranty Lifetime Technical Support support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon-Fri 9:00 AM - 5:00 PM (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 AM - 2:00 PM (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

() +86 400 0550 036 9:00 - 17:30

() 03 4455 7823 - 9:00 - 17:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30 (GMT+4)

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30 (GMT+4)

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30 (GMT+3)

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30 (GMT+3)

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30 (GMT+2) For FAQs and more information, please visit https://www.anker.com/support

4 FAB: US+JP AANNKER A2583 ie

) waae Wl sane ghee cneeeeeeentunennetnetnneenetneene | HIE: jinguan wu HAHA: 20210414 CED Wea apse pice) Dare OS AANNKER A2583 JNINAIER aa f IA VET el} ae eae Cee DCA a el ad Pogo Pin Output/HH79: 15V=1.2A, USB-C Output/USB-C 1177: SW CRETE Mao et aeRO Gan ee eee aoa conditions: (1) This device may not cause harmful interference, and (2) accept any interference received, including interference that may cause undesired operation FCC ID: 2AOKB-A2583 | CELL -e) UC SN:ABCDEF1234567890 HIE: jinguan wu HHA: 20210414 a tee Sea

C5266091_X10_Ed.2 Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/10/2021 Subject: Request for Confidentiality FCC ID: 2AOKB-A2583 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: louis Qi Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Anker Innovations Limited Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: Wireless Charger Model Number: A2583 FCC Identifier: 2AOKB-A2583 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 5/10/2021 Title:

Signature of applicant:

1/1