FCC ID: 2AOKB-A2941 Wireless Charger

A2583 - Safety Sheet - EN - 20210516 EN

To charge a low-power device with a current capacity of 80mA or less, press and hold (or double-press) the button on the portable charger for 2 seconds to activate the low-current charging mode. Use with the supplied wall charger only. Do not connect to a computer's USB port as it may affect the wireless charging function. Using an ultra-thick protective phone case or a case with a magnetic/metal plate is not recommended as it may affect the wireless charging function. Do not place any foreign objects between your smartphone and the wireless chargers surface, including metal pads on a car mount, credit cards, keys, coins, NFC cards or other metal objects, as it may cause overheating. Important Safety Instructions Please refer to the electrical and safety information before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. The socket-outlet shall be installed near the product and shall be easily accessible. Disconnection from line voltage should be made via the AC plug. When using this product, basic precautions should always be followed, including the following:

1) Store the product in a cool and dry place. 2) Do not store the product in a hot or humid environment. 3) Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. 4) Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. 5) If the product is not used for long periods of time, you should charge and discharge once every three months. 6) When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern. 7) In normal conditions, the battery performance will decline over several years. 8) Do not dispose of the product in heat or fire. 9) Do not clean the product with harmful chemicals or detergents. 10) Misuse, dropping, or excessive force may cause product damage. 11) When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other. 12) Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them. 1) 2) 3) () 4) 040 5) 6) 3 7) 8) 9) 10) 11) 12) 13) a) b) c) d) e) f) g) h) i) j) 1535 k) l) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Product Name: PowerWave Go 10K Model: A2941 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Industry Canada licenseICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-003(B). Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2583 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2583 is in compliance with Radio Equipment Regulations 2017. The full text of the GB declaration of conformity is available at the following internet address:

https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. Specifications

Input Output Product Number: A2941 Portable Charger USB-C Input: 5V=3A / 9V=2A / 15V=1.2A Pogo Pin Input: 15V=1.2A USB-C Output: 5V==3A / 15V==1.2A / 9V==2.22A

(20W Max) Wireless Output: 10W Max This product complies with the radio interference requirements of the European Community. Indoor use only This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Customer Service 18-month Limited Warranty Lifetime Technical Support support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon-Fri 9:00 AM - 5:00 PM (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 AM - 2:00 PM (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

() +86 400 0550 036 9:00 - 17:30

() 03 4455 7823 - 9:00 - 17:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30 (GMT+4)

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30 (GMT+4)

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30 (GMT+3)

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30 (GMT+3)

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30 (GMT+2) For FAQs and more information, please visit https://www.anker.com/support

Grant Dismissal Request Dear Sir, Due to the PAG procedure mistake with FCC ID: 2AOKB-A2941 application, we would like to dismiss the erroneous Grant. And will submit this application in correct procedure follow KDB 680106 requirement. We Anker Innovations Limited hereby state that the equipment requested for authorization has not been marketed or sold in the United States or sold in any other country labeled with that FCC ID. Thank you Date: 2021.08.31 Signed:

Anker Innovations Limited