K900 Sweeping Robot Operation Manual Thank you for choosing a product from our smart sweeping robot series Please read this Manual carefully before use; and store it properly. This product is intended for use only in the home or similar places. K900!
Thank you for purchasing the K900 smart sweeping robot from Ankobot. We hope you have a good experience!
Official website WeChat Official Account 400-676-0068 www.iamarey.com If you encounter any problems during use, please call our after-sales service hotline: 400-676-0068; and a professional will answer your questions. For more details, please visit our official website: www.iamarey.com Due to our continuous pursuit of improvement, this Manual may change depending on the actual product, and our company reserves the right to update the product at any time. Safety regulations When using this product, please be cautious and follow the guidelines below:
Please read this Manual carefully before using this product; and store it properly. Notes 1. 2. 3. 4. 5. 1. Potential problems that may occur during cleaning should be eliminated as soon as possible. Remove power cords and small items from the floor to prevent the product from being blocked during the cleaning process. Fold rug tassels below the rug, and hanging curtains, tablecloths and other items from touching the floor. 2. If there is an unsupported environment such as a staircase, please test the product to check whether it can detect the edge of the unsupported area without falling. A guard bar should be set up in the unsupported area or on the edge to prevent the product from falling. Make sure that the protective equipment does not cause personal injury such as tripping. 3. Please follow the instructions in this Manual when using the product. Use only accessories recommended or sold by the manufacturer. 4. Make sure that the power supply voltage is consistent with the voltage indicated on the charging stand. 5. Make sure that the dust collector and filtering material have been installed properly before using the product. 6. 7. 8. 9. 6. If the flexible power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department or similar department to avoid danger. 7. Shut down the device before cleaning and maintaining the product. 8. Please remove the plug from the power outlet before cleaning and maintaining the product. 9. If you will not use the product for a long time, please turn off the power of the product. 10. 11. 12. 10. Before disposing of the product, please remove the product from the charging stand and remove the battery while it is turned off. 11. The products battery must be removed and discarded in accordance with local laws and regulations before disposing of the product. 12. Please dispose of used batteries in accordance with local laws and regulations. 13.8 14. 15. 13. This product cannot be used by children under the age of 8 years or people with mental disabilities. If necessary, please do so under the supervision of a guardian. It is forbidden for children to ride on the product or play with the product as a toy. 14. This product is to be used in indoor home environments only. Do not use it in outdoor, commercial or industrial locations. 15. Do not use this product in a room where infants or toddlers are sleeping. 16. 17. 16. Do not use this product if the power cord or outlet are damaged. Do not use this product if it is unable to work properly due to being dropped, damaged, exposed to water or the outdoors. The product should be repaired by the manufacturer or after-sales service personnel to avoid injury. 17. Please use the product according to the instructions in the Manual. The Company is not responsible for any loss or damage caused due to improper use. Warning contents 1. 2. 3.(40)(0) 1. Use only the original rechargeable battery and charging stand specially provided by the manufacturer. Do not use non-rechargeable batteries. For information on battery specifications, please refer to Product Specifications. 2. It is forbidden to use the product in an environment with open flame or fragile items. 3. Do not use the product in extremely hot (higher than 40 C) or extremely cold (less than 0 C) environments. 4. 5. 4. It is forbidden to allow hair, clothes, fingers or other parts of the human body near the opening of the product while it is running. 5. Do not use the product on a wet floor, or a surface with water. 6. 7. 6. It is forbidden to allow the product to take in any items, such as stones or waste paper, that may clog the product. 7. It is forbidden to allow the product to take in any flammable materials, such as gasoline, lighters, coloring agents or toner used for copying machines. Do not use the product to clean an area with flammable products. 8. 9. 8. It is forbidden to allow the product to absorb any burning items such as cigarettes, matches, ashes or other items that may cause fire. 9. Do not place any items near the suction port. Do not use the product while the suction port is blocked. Clean dust, fibers, hair and other items at the suction port to ensure smooth air circulation at the suction port. 10. 11. 12. 10. Take care when using the power cord to avoid damage. Do not drag the device through the power cord or pull the product and the charging stand. Do not operate the product on top of the power cord; and keep the power cord away from heat. 11. Do not use a damaged charging stand. 12. Even if the product has been severely damaged, it is forbidden to incinerate the product, as the product battery may cause an explosion. Contents 1. Product components 01 1.1 Packaging components 01 1.2 Part names 02 2. Operation of Product 05 2.1 Caution 05 2.2 Preparation 06 2.3 Downloading APP and network configuration 07 2.4 Function operation 08 2.5 Pause and shutdown 10 2.6 Operation of water tank and cleaning cloth 10 2.7 Operation of dust collector 11 3. Product maintenance 11 3.1 Filter screen, cleaning cloth 11 3.2 Middle brush, side brush, caster 12 4. Product information 13 5.Troubleshooting 14 6. Warranty card 15 7. Certificate 15 1.1 Product components 1.1 Packaging components Main unit Charging stand Charging stands non-slip mat Operation Manual
( ) Cleaning cloth components (built-in) X2 Side-sweeping brush 2
(/ X2)
() Power cord Tool (Screwdriver/screw 2) Magnetic strip (optional) X1 Cleaning cloth 1 1.2 Product components 1.2 Part names Front view of main unit Infrared receiver module Microphone Recharge key Visual navigation sensor
/Start/pause key Bottom view of main unit:
Top-down view sensor Side-sweeping brush Roller cover assembly Optical sensor Charging electrodes Drive pulley Extension assembly Inside view of main unit:
Flip cover of shell Water tank Dust collector WIFI WIFI setting key WIFI WIFI indicator light Reset key Charging stand:
Signal emitting area Docking electrode Indicator light Power socket Dust collector:
Dust collector cover
() Filter assembly (washable) Cleaning brush Water tank:
Water filling nozzle Water box Cleaning cloth assembly:
Water permeable mop Buckle Positioning slot 2.1 Operation of product 2.1 Caution Remove objects on the ground, power cords for various household appliances, toys and other items, to avoid possible tripping or tangling that may affect normal cleaning operation or even cause short circuiting of wires and thus endanger personal safety. Please roll tassels underneath rugs or directly place the product on top of rugs when cleaning the room; because rolled-up burrs, fringes and other items may wrap around the main unit and thus affect cleaning efficiency. Magnetic stripe 90mm The product may become stuck if the bottom height of furniture is less than 90 mm above the floor. Please elevate such furniture with pads during the cleaning process to avoid such cases. Place magnetic strips on the edge of duplex floors to ensure safe operation of the product. Arrange seats and appliances in your home neatly so as to prevent the product from becoming stuck during the cleaning process. Please do not stand in the aisle or threshold to ensure that the product cleans every part of the room. 2.2 Operation of product 2.2 Preparation Limiting strip Remove the limiting strips on the side of main unit 1m1.5m Before using the main unit, please remove the limiting strips on the main unit. Place the charging stand Place the charging stand against the wall on a flat floor. Do not place any items within 1 m to each side of it or 1.5 m in the front of it, to keep the floor dry. Install side brush Start Start 3S Lock the side brush in the corresponding slot using a screwdriver. Start by pressing and holding the key for 3S. Startup music should play. Confirm that the sweeping robot has been turned on successfully Charging
*4
*
*APP
* The red indicator light will blink while charging; the white indicator light will be steady once the sweeping robot is fully charged. Charging time is about 4 hours.
* The main unit will automatically enter return home mode if it detects that power is too low during the cleaning process.
* Click the Recharge key on the APP to instruct the main unit to enter automatic return home mode. 2.3 APP Operation of product 2.3 Downloading APP and network configuration APP Remote operation, multiple cleaning mode selection, remaining power viewing and current status viewing of main unit can all be done through the mobile APP. Android iOS Please scan the QR code for Android system Please scan the QR code for iOS system APP Please scan the QR code to download and install APP Add device WIFI Turn on the devices WIFI
(5) Wifi After pressing the switch, the indicator light will flash quickly (if compatible mode is selected, the indicator light will flash slowly after pressing and holding it for 5S), and start to reconfigure Wifi. If it cannot be added normally, switch to a compatible mode Confirm that the indicator light is in the quick flashing state Select working network for device WI-FI Please make sure that your phone has been connected to WI-FI WI-FI Please select WI-FI signal WI-FI Please enter the WI-FI password Next step Select working network for device APPAPP
* 2.4GWIFI5G WIFI Network configuration and use Please follow the APP operation guide or the prompts on mobile phone APP interface to register, add devices and use products
*Requirements: 2.4G WIFI network environment, because 5G WIFI environment is not applicable. 2.4 Operation of product 2.4 Function operation
[ [Automatic cleaning]
APP This product can enter automatic cleaning mode by using key on the main unit or the APP while in standby. You can coordinate to clean the whole house in a zigzag or edge-sweeping route and return to the charging stand after cleaning is complete.
[Wall sweeping]
APP
*APP After opening the APP and pressing along wall mode, the main unit will start to sweep along the wall or the edges of obstacles. The main unit will enter return home mode after completion.
*This function can only accessed through the APP.
[ [Fixed-point cleaning]
APP
*APP After pressing the APP and clicking fixed-point mode, the main unit will start cleaning along a spiral route, and enter standby state location after completion. in
*This function can only be accessed through the APP
[Automatic recharging]
*
* /APP
* Once the main units power is low, it will send the voice prompt Low battery, entering return home mode, after which it will enter return home mode.
* In any cleaning mode, the main unit will automatically search for the charging stand once the key/ Recharge key is pressed in the APP, initiating the voice prompt Entering return home mode. Tips: Please arrange household items as neatly as possible. Do not put the charging stand in a place exposed to direct sunlight or cover the charging stand with objects to ensure that the main unit can return to the charging stand properly.
*APP
[Scheduled cleaning]
*This function can only be accessed through the APP. Scheduled cleaning Friday
[Suction mode]
APP (
)3 The 3 modes can be cycled through by using the APP (quiet, standard and strong). Machine settings Scheduled cleaning Xiaoya platform History Adjust volume Search for device Update firmware Share device Rename device Help center Cleaning area Online Cleaning time Wind power Wall sweep Fixed point cleaning Water volume Cleaning Smart map Recharge More APP (
)3
[Adjust water volume]
3 modes can be cycled through by using the APP (dry mop, some water and lots of water). Cleaning area Online Cleaning time Wind power Along the wall Fixed point Water volume Cleaning Smart map Recharge More 2.5 Operation of product 2.5 Pause and shutdown
* APP/
* 5S Pause
* During operation, press the key on the main unit or the Start/Pause key in APP Shutdown
* Press and hold the key on the main unit for 5S to enter the shutdown state, turning off all running modes 2.6 Operation of product 2.6 Operation of Water tank and cleaning cloth
[Water tank, cleaning cloth]
You can choose dry or wet mop, according to the situation, if you need to mop.
[Operation of dry mop]
*
*
*
* Put the covered edge of the dry-cleaning cloth into the bracket and then smooth it with your palm
* Place the installed cleaning cloth assembly under the tail of the device and push the cleaning cloth assembly by hand to fasten
*Press the buckles on both sides of the cleaning cloth by hand to remove.
[Operation of wet mop]
*
*
*
APP Remove the water tank Add water Install the water tank
*Remove the water tank
*Open the rubber plug of water filling nozzle, and close the rubber tightly after slowly filling the water tank with water
* Place the full water tank into the groove, pull the handle to the vertical position and then press the handle into the groove Tips: When selecting wet mop, please adjust the water volume through the APP 2.7 Operation of product 2.7 Operation of dust collector
[Cleaning the dust collector]
1. 2. 3. 1. Take out the dust collector 2. Open the dust collector and pour the garbage 3. Install the dust collector and close the panel. Trash can Check the garbage before each cleaning and clean the dust collector in a timely manner to avoid affecting the normal cleaning operation of the main unit. 3.1 Product maintenance 3.1 Filter screen, cleaning cloth
[Cleaning of filter screen]
1. 2. 3. 1. Take out the filter screen 2. Remove the cleaning brush 3. Clean the filter screen
[Cleaning of cleaning cloth]
1. 2 1. Rinse with water 2 Dry in the sun In order to ensure the continuous and effective cleaning ability of this product, please remove the water tank and clean the cleaning cloth regularly, regardless of whether dry mop or wet mop is used. 3.2 Product maintenance 3.2 Middle brush, side brush, caster
[Cleaning of middle brush assembly]
This is the major cleaning component of the main unit, so the cleaning performance of this product can be improved if it is cleaned frequently. Pull up the buckle to remove the rolling brush, remove filth and entangled hair on the rolling brush, and then put the rolling brush back into the slot and fasten it.
[Side brush]
The cleaning range can be widened by collecting waste and sweeping corners, but entangled hair may interfere with normal operation, so this should be cleaned frequently.
[Caster]
The caster is the component used to control the direction of the main unit. Normal movement and steering of the main unit may be affected if it is not cleaned regularly. Product information
[Indicator light]
No. Category Display state Description indicator White flashing quickly light On is White indicator light White indicator light is blinking Standby White indicator light is steady Fully charged 1 2 Pink indicator light Pink indicator light is steady Recharge Red indicator light Red indicator light is blinking Charging Red indicator light is flashing Alarm Blue indicator light Blue indicator light is steady In operation Blue indicator light is in the quick flashing state Configuring network Connecting to the network WIFI Blue indicator light of WIFI Blue indicator light is flashing slowly
-() Blue indicator light is flashing slowly - (on for a short time and off for a long time) AP AP mode Blue indicator light is steady Successfully connected to the network 3 4 5 6 Reset Reset Operation button Reset button Press Reset to enter the Off state Operation key Set Set bet Set5S(AP) Press Set to enter the Network configuration mode. Press and hold it for 5S to enter compatibility mode
(SoftAP) Operation button White indicator light This light will turn on after touching it with a finger;
the light will turn off after releasing finger Operation button White light indicator This light will turn on after touching it with a finger;
the light will turn off after releasing the finger
() Remarks: Power-on state: Specifically refers to all states besides shutdown, including working, standby, and sleep states (all indicator lights are off)
[Product parameters]
Product name K900K900 smart sweeping robot Battery capacity 5200mAh Charging type Automatically recharge Volume of dust collector 420ML Volume of water tank 180ML Sweeping mode Automatic, along the wall, fixed point, scheduled Charging stand AC100 240V Rated power 50W APPIs controlled by APP Yes Mopping function Yes Troubleshooting If one of the following cases occur during Operation of the main unit, please refer to the following troubleshooting guide. No. Fault 1 Main unit isnt charging Possible cause Solution The switch of main unit is turned on and the charging stand is not connected to power, causing the power to run out. Ensure the main unit is charging so that it can be used next time The charging electrode of the charging stand has not made full contact with the main unit Fully dock the main unit and the charging electrode of the charging stand The main unit is blocked by items on the floor 2 The main unit is stuck The main unit is stuck by the carpet The charging stand is not in the right position The main unit cannot return to the charging stand Before the main unit starts working, please clean power cords, fragile items and other articles on the floor, to protect them from getting stuck during operation The main unit is not suitable for use on long-haired carpet. When cleaning rugs with tassels, fold the tassels and put them below the rug Please refer to the instructions for properly placing the charging stand There is no water in the water tank Add water to the water tank The water outlet of main unit is blocked the After cleaning cloth assembly is installed, the main unit is able to work without Clear the water outlet 3 4 5 6 7 8 9 water penetration capability Side brush fell off Screw torque is not enough The dust collector is full The suction is weak Filter screen is blocked The side brush is not installed properly. Please re-tighten the screw with the proper tools Clean the dust collector Clean and dry the filter screen or replace it with a new filter Side brush or rolling brush is entangled, or dust collector or filter screen is blocked It is recommended to clean and maintain the side brush and rolling brush regularly. Running sound is loud during main unit operation Main unit power is low APP Please charge APP Cleaning was not set successfully on APP or has been canceled Please schedule according to the APP operation guideline. Scheduled cleaning not completed successfully The left or right side wheels may be caught by an object Please check whether the left or right side wheels are entangled and clean the side wheels The right side brush may be caught by foreign matter The device is abnormal Please check whether entangled and clean the side brush the right side brush is Dust collector is not installed properly, thus causing abnormalities Pull the dust collector out and reinstall it The main unit is suspended in the air Check whether the main unit is lifted from the floor Due to the need for continuous improvement of products, the Company reserves the right to make technological or design changes to the product, interpretation rights belong to the Company. or stuck on an edge and manually adjust if necessary Warranty card User name Address Telephone number Postal code Product model Purchase date SNProduct SN code Warranty date Notes for after-sales services:
1. 2. 3.400-676-0068 1. This warranty card can be used as a warranty basis. 2. If you need repairs, please fill in this card, so you can enjoy the associated quality assurance services. 3. Please store this warranty card properly. If you have any questions, please call: 400-676-0068. Warranty regulations:
1. 1. Commitments for product return and exchange:
(1)7
(2)815
(1) Within 7 days from the date of sale, the consumer can choose to return, exchange or repair the products with quality problems or faults after receiving the quality inspection certificate of the manufacturer.
(2) The consumer can choose to exchange or repair products with quality problems or faults within 8-15 days of purchase. 2. 2. Product warranty commitment:
The user will enjoy one-year free warranty from the date of purchase for the complete product in case of any quality problems under normal and reasonable operating conditions. 3. 3. After-sales servicing:
After-sales servicing of all smart sweeping robot products is done through sending product in for repair. Sending products in for repair: When this service is required, the product must be sent by the consumer to the designated repair location. Mailing costs incurred due to product quality problems during the warranty period will be borne by Amarey Smart Sweeper Robot. 4. 4. Warranty scope:
() From the date of purchase by the user (subject to the invoice or valid sales voucher), the user will be given a free warranty due to failure caused by quality problems of this product under normal operating conditions. Reminder: When you need repairs, please fill in the warranty card accurately and completely and send the card together with the product so that we can provide better services to you. Certificate
: Date of manufacture:
Inspector FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. RF warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.