Used Model by :
SSEyEEe
| AS-AP515915ACN-S | ANSER -NET
| AS-AP515904ACNO-S | 5 . Wireless Solution
| AS-AP515919ACN-S | | AS-AP515919ACNO-S |
| AS-AP515920ACN-S | | AS-AP515920ACNO-S |
| AS-AP515923ACN-S | | AS-AP515923ACNO-S |
| AS-AP5159X51ACN-S | | AS-AP5159X52ACN-S |
| AS-AP245915X51ACN-S | | AS-AP2459X52ACN-S |
| AS-AP24590819ACN-S | | AS-AP24590820ACN-S | | AS-AP24590823ACN-S |
User Manual Quick Setup Wizard ...:
I\n ANSER-NET Wireless Solution
| | Specifications 802.11 a/n/acstandard specification The highest bandwidth transmission rate can reach 867Mbps
\ Wireless Specification 5150~5250MHz full frequency band supports
. a minimum cut frequency every SMHz Band su pport Support dual hardware to watch the door, Watch Dogs the device will restart automatically when the device crashes or the packet isblocked hei | ' Recommended transmission distance 1~2KM Sco pe of use y ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 1 : Modify the network segment of the computer network card In ANSER-NET Wireless Solution AP Mode Setup : IP do not use 192.168.2.66 Client Mode Setup : IP do not use 192.168.2.66 General |
You can get IP settings assigned automatically if your network supports You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings, for the appropriate IP settings. Obtain an IP address automatically Obtain an IP address automatically
@se the following IP address: @Use the following IP address:
Default gateway: . Default gateway:
Obtain DNS server address automatically Obtain DNS server address automatically
@Use the following DNS server addresses: @ Use the following DNS server addresses:
Preferred DNS server: . Preferred DNS server:
Alternate DNS server: a Alternate DNS server:
(Validate settings upon exit | (Validate settings upon exit ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 2 : Use Default IP to Login Inn ANSER-NET*
Wireless Solution AP Mode Setup : Open Web and Keyin IP : 192.168.2.66 Client Mode Setup : Open Web and Keyin IP : 192.168.2.66 192, 168:2 66 192.168.266 RF ikinke 2 RF ikink o ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 3 : Login to AP Inn ANSER-NET Wireless Solution AP Mode Setup : ID : admin / Password : adminO1 - choose your Language Client Mode Setup : 1D : admin / Password : adminO1 : choose your Language LOGIN LOGIN RF iLink Fic |
Wireless system ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 4 : Setup Wireless Information Inn ANSER-NET Wireless Solution AP Mode Setup : Choose settings button Client Mode Setup : Choose settings button LJ SN : = [-] DNS :
. _ . INFORMATION 2 i INFORMATION w Product name: A operating w Product name:
Denice sel No Dene sent Ho a Wiles mee Channa wat, lr: 60 aah Channa wat, Radio meee vr metnod: Sik (v6 memod: sabi motos \Pvometnee: Disbee ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 5 : Setup Operation mode In ANSER-NET Wireless Solution AP Mode Setup : Operating mode choose Access Point Client Mode Setup : Operating mode choose Station G Poca +o WIRELESS CONFIGURATION Es ene rae: I) peraung county: | et
% z ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 6 : Setup TX Power ~ Channel In ANSER-NET Wireless Solution AP Mode Setup : TX Power use 16dBm : Channel choose Auto / 80MHz Client Mode Setup : TX Power use 16dBm - Channel choose 20/40/80MHz REF iLink i @) ( a Newer $0 swcunty Monagenent ronda 10 yuan RF iLink i = bd a WIRELESS CONFIGURATION ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail
: ethan @anser-net.com.tw
| Step 7 : Setup individual frequencies Channel I\n ANSER-NET Wireless Solution AP Mode Setup : If you do not auto channel - you can fixed a frequency Client Mode Setup : Station mode still use 20/40/80MHz
(CHANNEL SELECTION Chane wn, ti: | 90 cman Txt gem ER Emi, Bm 2m (st00 we 062000) 4 s220 so s200 mH) DFSIATPC requ No WIRELESS CONFIGURATION ewer: ET]
Operating mode: | stton(ARPNAT) Txpowey, 8m:
Enable ATPC Newark $10 ren pene Ceuta) 36min, ove r ef Discemneted Po stators
(Where: 10easeTha Operating county: | CT width Mie: 204080 fw mort channel wth Non standars channels:
Management vn nati - . ANSER-NET CO., LTD | Tel : 03-3708107 | Fax
: 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 8 : Setup SSID + Security Inn ANSER-NET Wireless Solution AP Mode Setup : Choose settings button to setup SSID / security Client Mode Setup : Choose settings button to setup SSID / security NO@@\EG RE itink )@&)@G
: y fh embed: I) a cpeaang coum: [Fer ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 9 : Setup SSID - Security In ANSER-NET Wireless Solution AP Mode Setup : Setting SSID + Security + Hide or Broadcast SSID Client Mode Setup : Setting SSID + Security - and lock AP MAC address WIRELESS STATION SETTINGS ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw
| Step 10 : Setup IP - Mask - Gateway and DNS In ANSER-NET Wireless Solution AP Mode Setup : Choose Network configuration to setup IP/Mask/Gateway Client Mode Setup : Choose Network configuration to setup IP/Mask/Gateway x i hd x
. . Cs
= toce ose Spee Mos oupier sutenevosaven = tetoce ose spre, Mos uote Actonevovavon ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw Step 11 : Save the Changes ANSER-NET Wireless Solution de Setup : Choose Save changes and Save the setup changes ode Setup : Choose Save changes and Save the setup changes WIRELESS GHA TAPCANS.AB) WORELESS/ SHe/ABLANS AD S90 sis 380 ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw i FCC Warning TaN ANSER-NET Wireless Solution Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. Section 15.105 (a) for Class A Device For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Part 15.19(a)(3) unlicensed project This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. This End equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ANSER-NET CO., LTD | Tel : 03-3708107 | Fax : 03-3708169 | Cell : 0952-340987 | Web : www.anser-net.com.tw | Mail : ethan@anser-net.com.tw