FCC ID: 2A7ES-185BT Record Player

V.2 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE CAUTION MARKING AND RATING LABEL ARE LOCATED AT THE BOTTOM OF THE UNIT IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers Follow all instructions. instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for a long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to 2 AC Outlet AC Plug Remark:-

- To disconnect the Bluetooth connection, slide the Function switch (4) to PHONO position, or turn off the Bluetooth feature of your Bluetooth device. LINE OUT CONNECTION You can connect this unit to your external Hi-Fi / AMPLIFIER system by connecting the LINE OUT socket (16) to the auxiliary input socket of your Hi-Fi / AMPLIFIER system. with a RCA cable (not included). Note: The Volume control will not function when using the LINE OUT. USING HEADPHONES (NOT INCLUDED) Inserting the plug of your headphones into the Headphone jack will enable you to listen in private. READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 1. Avoid extended play at very high volume as it may impair your hearing. 2. If you experience ringing in your ears, reduce the volume or shut off your unit. 3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you to hear outside sounds. Please note that excessively high volume may still block outside sounds. CARE AND MAINTENANCE 1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. 2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 3. Unplug the unit from the electrical power outlet immediately in case of malfunction. CLEANING THE UNIT To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts. If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning. SPECIFICATIONS AC Power: AC 120V ~ 60Hz Bluetooth Maximum communication range: Line of sight approx. 10m (30 feet) 6 SeeYing seeyinguserservice@outlook.com technical seeyinguserservice@outlook.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Model: TT-185BT FCC ID: 2A7ES-185BT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. ini i =a fail

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SHENZHEN ZKT TECHNOLOGY CO., LTD. 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Shenzhen Peoples Republic of China Mr. Lake Xie Phone: 0086-13620010775 zkt@zkt-lab.com ELECTRICAL1 Valid To: March 31, 2023 In recognition of the successful completion of the A2LA evaluation process accreditation is granted to this laboratory to perform the following electrical tests on IT/AV, Home Appliances, Lighting, Wireless, and Battery products:

Certificate Number: 5755.01 Test Technology:

Emissions Conducted and Radiated Immunity Test Method(s):

47 CFR, FCC Part 15 B,

(ANSI C63.4:2014);

47 CFR, FCC Part 18

(using MP-5:1986);

IEC/CISPR 22; AS/NZS CISPR 22;

IEC/CISPR 11; EN 55011; AS/NZS CISPR 11; BS EN 55011 IEC/CISPR 13; EN 55013;

IEC/CISPR 14-1; EN 55014-1; BS EN 55014-1 IEC/CISPR 15; EN 55015; BS EN 55015 EN 61000-6-3; AS/NZS 61000-6-3; BS EN 61000-6-3 EN 61000-6-4; AS/NZS 61000-6-4; BS EN 61000-6-4 EN 61000-3-2; EN 61000-3-3;

BS EN 61000-3-2 ; BS EN 61000-3-3 IEC/EN 55032; AS/NZS CISPR 32; BS EN 55032 ICES-001; ICES-003; ICES-005 IEC/CISPR 24; EN 55024; EN 61547; BS EN 61547 IEC/CISPR 14-2; EN 55014-2; BS EN 55014-2 EN 61000-6-1; BS EN 61000-6-1 EN 61000-6-2; BS EN 61000-6-2 EN 61326; EN 61326-1; BS EN 61326-1 IEC 61000-4-2; EN 61000-4-2; BS EN 61000-4-2 IEC 61000-4-4; EN 61000-4-4; BS EN 61000-4-4 IEC 61000-4-5; EN 61000-4-5; BS EN 61000-4-5 IEC 61000-4-8; EN 61000-4-8; BS EN 61000-4-8 IEC 61000-4-11; EN 61000-4-11; BS EN 61000-4-11 IEC 60601-1-2; EN 50130-4; BS EN 50130-4 CISPR 35; IEC/EN 55035; BS EN 55035

(A2LA Cert. No. 5755.01) 03/08/2021 Page 1 of 4 Test Technology:

Intentional Radiators RF Exposure (MPE) Test Method(s):

47 CFR, FCC Part 15 C

(ANSI C63.10:2013);

47 CFR, FCC Part 15 E

(ANSI C63.10:2013);

FCC Public Notice DA 00705;

KDB 558074 D01 DTS Measurement Guidance ;

KDB 789033 D02 General UNII Test Procedures New Rules RSS-210; RSS-310; RSS-247 (excluding DFS); RSS-GEN; RSS-216;

AN/NZS 4268;

Reference Method:

ARIB STD-T66;

(Ministerial Ordinance of the Ministry of Post and Telecommunications No. 31 of April 1, 1985 as amended by Ministerial Ordinance No. 44 of March 22, 2004, and Ministerial Ordinance No. 92 of October 2010) Article Number in certification law:

Article 2-1-19 (Low Power Data Communication in 2400-2483MHz), Article 2-1-19-3 (5.2/5.3GHz Low Power Data Communication), Article 2-1-19-3-2 (5.6GHz Low Power Data Communication);

ETSI EN 301 489-1; ETSI EN 301 489-3;

ETSI EN 301 489-9; ETSI EN 301 489-17 ETSI EN 303 417; ETSI EN 300 330;

ETSI EN 300 220-1; ETSI EN 300 220-2;

ETSI EN 300 220-3-1; ETSI EN 300 220-3-2;

ETSI EN 300 220-4; ETSI EN 300 440;

ETSI EN 300 328; ETSI EN 301 893;

ETSI EN 301 357 ANSI C95.1;

RSS 102 (RF Exposure only); FCC Part 1.1307; FCC Part1.1310;

Radio communications (Electromagnetic Radiation Human ;

EN 62311; EN 50665; EN 62479; EN 50663

(A2LA Cert. No. 5755.01) 03/08/2021 Page 2 of 4 Test Technology:

Electrical Product Safety Test Method(s):

Audio/Video,information and communication technology equipment IEC 62368-1; EN IEC 62368-1; BS EN IEC 62368-1;

AS/NZS 62368.1; UL 62368-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systems IEC 62133-2;

EN 62133-2; BS EN 62133-2 HOUSEHOLD AND COMMERCIAL BATTERIES UL 2054 LITHIUM BATTERIES UL 1642 Power Banks UL 2056 1 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories.

(A2LA Cert. No. 5755.01) 03/08/2021 Page 3 of 4 Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.12 Rule Subpart/Technology Test Method Unintentional Radiators Part 15B Industrial, Scientific, and Medical Equipment Part 18 Intentional Radiators Part 15C U-NII without DFS Intentional Radiators Part 15E ANSI C63.4:2014 FCC MP-5:1986 ANSI C63.10:2013 ANSI C63.10:2013 2Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. Maximum Frequency

(MHz) 40000 40000 40000 40000

(A2LA Cert. No. 5755.01) 03/08/2021 Page 4 of 4 Accredited Laboratory A2LA has accredited SHENZHEN ZKT TECHNOLOGY CO., LTD. Shenzhen, Peoples Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system

(refer to joint ISO-ILAC-IAF Communiqu dated April 2017). Presented this 8th day of February 2021. _______________________ Vice President, Accreditation Services For the Accreditation Council Certificate Number 5755.01 Valid to March 31, 2023 For the tests to which this accreditation applies, please refer to the laboratorys Electrical Scope of Accreditation.

le49p94 JO |eIUap 0} jafqns ou sayyng 798 D'S'N BE syyauaq 954 Sepnjut yeuy sy PIT 0D A daHew siyy 0} UOUAIe INo/

sqyeuaq D4 sapnjou SI uoneayidde ayy 03 (q)z99z"

GT 40 Lov asngy Bnig-nuy aug jo Tore uo}9%

yeuaq |eJapay Jo jeu UdJaoU0D Ae;

34 4g Ssauisng 4 A6ojouyra, sjeua 2202 b AONIDY 4O waLL3ay]

Bojouyre (NaHZ N3HS)NId Ov Alingyyey suno, 405 NOA yUeYL 13243 syyauaq USP se Aued 9S 0} Juensund 24} AyIa2 ay N WI Wwoym oy in XT bTUM 1YS4aSaDI0N), Usaaley

>YSI9044 OOT leW Juawa/3 L unr sajeg

AO PIN(SHEN ZHEN)Technology Co. Ltd Date: 2022-06-15 Subject: authorization for adding family models To whom it May concern, Statement We would like to confirm the product Record Player with models (185BT, 930E, SY102, SY103, SY106, SY108, SY109SY801, SY802, SY803, SY806, SY808are same in all respects. Only the model names are different for different market requirement. Yours sincerely, Signature Name:Siming Lai Title: Manager

WIN 9} Jo a3ep oy} aI0Jaq ap SIU} JO oINsoposip sony aptAoid pue yueordde ay) 0} [nyu 0} paseajas A[Leuroysno jou uoHeL Jpduonduc JP

:Mojaq pou Jeuaplyuos ysanbas Aqasay am sz LaS8I-SALVZ :dI O04 J 7207 pI Une req PYT 0 ASoy a BU 9q JOU [[IM UonejUaUINDOp ZuIAueduIOD0B 9} JO LSp'0 WOHDag 0} ueNsInd yey} spuejsio

*SIOJadUIO9 $}1 0} s}

uey oq Aeur sjetiayeur asayy Jo amnsojosip o1yqn woyur Arejatidord pur syoroos ape} Ule}UOD se!

sa [euoeiodg I'wesseiqg yoo1g Jpd'soneurayog owen od uondi

[No se uoHeordde sip BurAuedutosoe uoneUuLi INY S.UOIssHWUIOD at} Jo GSp'O pue Lp'0 suON

) UOHBdITH99 Joy uoNeordde Suipsesor jsonboy WOISIAIG UONeneAg put WOISsIWIWOD suoneoruni UY2.L(NAHZ NAHS)NId OV Oe Le Los q Ayaraourg loneordde sty 10y

[2 pue uoneordde pun jueordde ayy lyauaq paynsnfun d ayy, ogqnd ap 9}BU 9Aoge oy], saq [euoneiodg weidelq yoolg soneurayog addy nquuxa UI JO JUsUeOL) 99 0} JUeNsing Aujenuopyuoy uonezoyny WOD [esopay