FCC ID: 2AZ6P-1166197 WiFi Range Extender

Wi-Fi Range Extender Quick Installation Guide Hardware Overview Getting Started Please do not install the Device in where it is heavily surrounded by things. Please install the device as followings:

- Pictures with : Recommended

- Pictures with X : Not Recommended WPS Button Reset Button Power/WPS LED WAN/LAN LED Wi-Fi Signal status LED Mode Wi-Fi Signal Status LED LED Indicators POWER LAN/WAN WPS Wi-Fi Signal ON: The Device is powered on OFF: The Device is not receiving electrical power. ON: The Ethernet port is connected. OFF: The Ethernet port is disconnected. Flashing: Transferring data to/from a network device Slow Flashing: The Device is trying to connect to your PC or Phone Fast Flashing: The Device is connecting to your AP/Router Repeater ON ON ON ON ON OFF ON OFF OFF OFF Flashing OFF Disconnected Description Better reception signal strength 75% to 100%

Good reception signal strength 50% to 75%

Weak reception signal strength below 50%

WPS Button:

Press and hold for 2 seconds, the Device is trying to connect to your PC or Phone . Press and hold for 6 seconds to connect to your Wi-Fi Repeater Mode. Reset Button: Press and hold for 3 seconds to Reset the Device. Default Parameters Web Setup: http://ap.setup Default IP: 192.168.10.1 Password: admin 2.4G SSID: LOCKDOWN_EXT EN OPTION ONE Wi-Fi Repeater Mode Using a Web Browser 1 Power ON 2 Connect to the Device 3 3 Configure Plug the Device into an electrical outlet near your For Windows User For Mac OS X User Wi-Fi router. 1. Launch a web browser and type http://ap.setup in the address field. Enter admin (all lowercase) 2. Click Wizard. to login. 3. Select a Wi-Fi SSID of your router (Host Wi-Fi) and enter the password. Either keep the same SSID as your host Wi-Fi or create a new name for the extended network. Not connected Connections are available Wireless Network Connection LOCKDOWN_EXT Connect automatically Connect Wi-Fi:On Turn Wi-Fi Off LOCKDOWN_EXT Join Other Network.... Create Network.... Open Network Preferences... 1. Disconnect the Ethernet (Wired) connection 1. Disconnect the Ethernet (Wired) connection from your laptop (if any). from your laptop (if any). 2. Turn your laptops Wi-Fi ON if it is OFF. 3. Click the Wi-Fi icon on the taskbar and connect to the Devices network: LOCKDOWN_EXT 2. Turn your laptops Wi-Fi ON if it is OFF. 3. Click the Wi-Fi icon on the top right corner of the screen, and connect to the Devices network: LOCKDOWN_EXT Repeater Wizard Connect to:

Wireless_530 Host Wi-Fi Name Wi-Fi Password:

Host Wi-Fi Password Repeater SSID:

LOCKDOWN_EXT Connect Select a Wi-Fi Manually enter Wireless_530 Wireless-562 Wireless-N Wireless-112 Wireless-MO If the login window does not pop up, please refer to the FAQ > Q1. 4. Verify your wireless settings and click "Connect". The Wi-Fi Signal LEDs should turn on and stay solid, indicating successful connections. Status Wizard Wi-Fi Setup Status Wizard Wi-Fi Setup 4 Relocate 1. Plug the Device into an electrical outlet about halfway between your router(Host Wi-Fi) and the Wi-Fi dead zone. The location you choose must be within the range of your existing host Wi-Fi. 2. Wait until the WLAN LEDs are ON. If the signal is weak, relocate it closer to the router to achieve a good (or better) signal quality. Host Wi-Fi Ideal Location Too Far Away WLAN WLAN WLAN WLAN Flashing Tips: Use your phone to find the ideal location for the Device. If your phones Wi-Fi signal(received from your router) is higher than 3 levels, it is the ideal spot to install the Device. If not, we suggest you to move closer to your router for better Wi-Fi signal. OPTION TWO Wi-Fi Repeater Mode Using WPS (Wi-Fi Protected Setup) 1 Power ON 2 Connect Plug the Device into an electrical outlet near your Wi-Fi router. 1. Press the WPS button for 6 seconds on the Device. 2. Within two minutes, press the WPS button on your router. 3. The Device will reboot, please wait a few minutes. Press Press 1~2 seconds Press 6 seconds Tips:The corresponding WLAN LEDs should turn on and stay solid, indicating successful connections. Note:

1). Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use OPTION ONE. manufacturer's user guide. 2). For more information about using WPS on your router, please refer to the router 3 Relocate Wireless Basic Configuration 1. Click Wi-Fi . 2. You can customize wireless network for the Device. Wi-Fi Setup Wi-Fi Setup Wi-Fi Signal Advanced Settings Tips: Use your phone to find the ideal location for the Device. If your phones Wi-Fi signal(received from your router) is higher existing host Wi-Fi. than 3 levels, it is the ideal spot to install the Device. If not, we suggest you to move closer to your router for better Wi-Fi signal. 1. Plug the Device into an electrical outlet about halfway between your router(Host Wi-Fi) and the Wi-Fi dead zone. The location you choose must be within the range of your 2. Wait until the WLAN LEDs are ON. If the signal is weak, relocate it closer to the router to achieve a good (or better) signal quality. Host Wi-Fi Ideal Location Too Far Away WLAN WLAN WLAN WLAN Flashing Management via Web Browser Change Login Password Firmware Upgrade The default password of the device is admin, we strongly recommend you change the default password of the device. 1.Visit http://ap.setup, and log in with the default password admin. 2. Click Setup->Login Password. 3. Enter the old password.Then enter the new password and click Apply. Login Password Old Password:

New Password:

Confirm Password:

Apply Firmware upgrade can fix bugs of the Device. However, We DO NOT recommend you upgrade the firmware of the Device if it works normally. 1. Click Setup-> Upgrade Firmware. Upgrade Flrmware Version:M78N_V3130.210323 Select file No files selected Do NOT power off the device during the firmware upgrade. Wait a few minutes for the firmware upgrade to complete and the device to reboot. GNU General Public License Notice This product includes software codes developed by third parties. These software codes are subject to either the GNU General Public License (GPL), Version 2, June 1991 or the GNU Lesser General Public License (LGPL), Version 2.1, February 1999. You can copy, distribute, and/or modify in accordance with the terms and conditions of GPL or LGPL. The source code should be complete, if you want us to provide any additional source code files under GNU General Public License (GPL), please contact us in Apply these matters. We are committed to meeting the requirements of the GNU General Public License (GPL). You are welcome to contact us local office to get the Status Wizard Wi-Fi Setup corresponding software and licenses. Please inform us your contact details 2. Click Browse to locate the downloaded new firmware file. 3. Click Apply button, and wait a few minutes for the firmware upgrade to complete. Warranty voids if you interrupted the upgrade procedure. NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from the device. If the procedure is interrupt, the firmware upgrade will fail, and you may have to return the device to the dealer to ask for help.

(full address)and the product code. We will send you a software package with the software and license for free. The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the GNU General Public LicenseWeb site for further information. http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html http://www.gnu.org/licenses/gpl.html Status Wizard Wi-Fi Setup Status Wizard Wi-Fi Setup 4. Use the new password for future login attempts. FAQ (Frequently Asked Questions) Q2. What should I do if the LED does not change to solid after completing OPTION ONE?

You may have entered the incorrect Wi-Fi password of your host Wi-Fi during the configuration. Please log into the Devices Q1. Why doesnt the login page appear after entering http://ap.setup?

Make sure your computer is connected to the Extended network SSID or connect your computer to the Device using an Ethernet cable. Make sure your computer is set to obtain an IP address automatically. Verify that http://ap.setup is correctly entered in the web browser and press Enter. web-based interface to check the password and try again. Please reset the Device and go through the configuration again. Q3. How do I restore the Device to its factory default settings?

While the Device is powered on, press and hold the Reset button until all the LEDs turn on momentarily. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Wi-Fi Range Extender

| eel Colel T Engineered in the USA Made in China

#1166197 FE Fcc Ip: 2azep-1166197 Input: 100-240 VAC 50/60Hz 0.3A max aa ee ICONTTTHA LATO TL ee Tn Mt i a Do Ca) i ll Satatessatenste. See SS NUL va 4 bana l|

em

AOB Products Company Date: Jun. 24, 2021 File Name Schematics.pdf Block Diagram.pdf Operational Description.pdf Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AZ6P-1166197 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Winstars Technology Limited Signature Michael Galloway / Quality Engineer Supervisor Typed name and Title

AOB Products Company FCC ID: 2AZ6P-1166197 POWER OF ATTORNEY Date: Jun. 24, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Jun. 23, 2022. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, AOB Products Company are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, AOB Products Company Signature Michael Galloway / Quality Engineer Supervisor Typed name and Title