AOK-5006B/2039B English manual (US) Please read the operating instructions carefully to familiarize yourself with the features and modes of operation before using the instrument. Keep the manual for future reference and pass it on with the device, if you pass on the device to other users. NOTE: Always remember to use high quality batteries & change them at least once per year. PACKAGING CONTENTS 1 x weather station 1 x outdoor sensor 1 x AC adaptor 1 x instruction manual LCD DISPLAY Overview of icons and buttons Front side and display 1. Weather 2. Channel recycling icon 3. Channel 4. Comfort face 5. Trend for indoor temperature 6. RF symbol 7.Trend for outdoor temperature 8. Max/Min for outdoor temperature and humidity 9. Indoor temperature 10. Max/Min for indoor temperature and humidity 11.Low battery for indoor unit 12. Indoor humidity 13.Trend for indoor humidity 14. Alert for outdoor temperature 15.Trend for outdoor humidity 16. Outdoor humidity 17.Low battery for outdoor sensor 18.Time 19. WEEKS 20.Day of week 21. Month 22. Alarm 23. Date 24. Hour of history 25. Air pressure 26. Moon phase 27.Light a/b/c mode 28.Outdoor temperature 29.Icy alert 30. Trend for air pressure Top side:
Press button Press and hold (3 seconds)
(A) MODE Time/Alarm1/Alarm 2 switching Setting the time format, time zone shift, hours, year, date, day of the week language ,,air pressure unit, C/F .
(B) CH Channel 123 switching Re- registration the CHANNEL data
(C) ALERT ON/OFF temperature ALERT Setting the temperature ALERT
(D) SNOOZE 1. Activates alarm snooze Air pressure reading adjust LIGHT 2. Display black light (when without power adaptor plugged in)
(E) MEM Check the MAX/MIN temperature and Clear the MAX/MIN temperature and humidity data ; One step forward in humidity data setting Check the history of air pressure
(F) One step back in setting HISTORY
.G= DC 5.0V adaptor power jack Wireless sensor H= Outdoor temperature and humidity I = LED of signal transmission from the sensor J = A hole to hang the device on the wall K= channel switch Getting Start with Power Supply Insert Batteries 1. Gently remove the stand downwards and remove battery compartment cover from the main unit. 2. Insert the batteries, matching the polarities (+/-). DC Power :
1. Put the power cable pass through the hole in the stand, plug the power cable to the power jack and plug the power adapter into a suitable power outlet. NOTE It is recommended to insert the battery as a backup power. Remote Sensor 1. Open the remote sensor battery door, insert the batteries, matching the polarities (+/-) Note: To prevent water from entering the sensor, it is important to make sure the battery lid closes tightly. 2. Place the sensor near the main unit in order to establish an effective wireless transmission. Do not place the sensor outside until the transmission have be confirmed. 3. Observe the indoor unit LCD screen to see OUT temperature and humidity displayed to confirm the transmission completed NOTES:
First plug in the adaptor or insert the batteries of main unit, then insert the batteries of the outdoor sensor in 3 minutes after the main unit is powered on, to assure of the sensor data received well. In case of the outdoor sensor data received failure, please press CH key for more than 3 seconds to synchronize the RF signal. Every time the power adaptor unplugged and with no batteries inserted, the main unit will lose all the weather data. Every time the outdoor sensor batteries are replaced, the sensor will synchronize with the main unit again. You must press the CH key for more than 3 seconds to synchronize the RF signal. Mounting the main unit The main unit can be placed onto any flat surface or wall mounted at the desired location by hanging hole, It is important to check that the radio signals (from the sensors and from the DCF77 time signal) can be received before mounting. Mounting the outdoor sensor Suggest the outdoor sensor to be hung on as below showing, better not stand it at outside place,try to avoid direct sun shine or rain as much as possible. Initial Operation After inserting the batteries or adaptor plugged in, the altitude flashing in meters, press MEM or HISTORY to set the altitude of your position, then press SNOOZELIGHT to confirm The weather icon flashing, press MEM or HISTORY to choose the weather, then press SNOOZE/LIGHT to confirm The main unit will connect with the outdoor sensor by RF signal. The RF signal symbol at the out area will flash. This process takes about 3 minutes. Then the display shows the outdoor temperature /humidity, in case of failure of reception , please press CH for more than 3 seconds to receive again. Information Please observe a minimal distance of 2.5m to sources of interference such as televisions or computer screens. The radio signal is weaker in rooms with concrete walls (e.g. in the basement) and in office buildings. For extreme cases, please put the main unit near a window. There are less atmospheric disturbances at night. A radio time signal reception is usually possible at that time. One synchronization per day is sufficient to keep the time display accuracy at 1 second. Wireless connection to the outdoor sensor You can read the data of up to 3 sensors at one weather station. Use the sliding switch for each outdoor sensor to select the outdoor sensor channel Press the key CH in main unit to select a channel. Press and hold the key CH in main unit for 3 seconds to search for outdoor sensor . Manual set-up In standard mode, press and hold key MODE for 3 seconds. The 12/24 hour flashing. Use MEM or HISTORY to select Press MODE to confirm. The display for the time zone is flashing. Use MEM or HISTORY to select the time zone
(-12 to +12). Press MODE to confirm. The DM/MD flashing, Use MEM or HISTORY to select Press MODE to confirm. The display for the year is flashing. Use MEM or HISTORY to select the year. Press MODE to confirm. The display for the month is flashing. Use MEM or HISTORY to select the month. Press MODE to confirm. The display for the date is flashing. Use MEM or HISTORY to select the date. Press MODE to confirm. The display for the hour is flashing. Use MEM or HISTORY to select the hour. Press MODE to confirm. The display for the minutes is flashing. Use MEM or HISTORY to select the minutes.. Press MODE to confirm. The language selection for the display of the weekdays is flashing. Use MEM or HISTORY to select the language (GE- German, EN - English, IT - Italian, FR - French, DU - Dutch, SP - Spanish, DA -
Danish). Press MODE to confirm The hPa/inHg for air pressure flashing, Use MEM or HISTORY to select . Press MODE to confirm. The C/F for temperature flashing, Use MEM or HISTORY to select. Press MODE to confirm. Information:
The clock automatically exit the set-up mode if no keys are pressed for 20 seconds. DST (Daylight saving time) 1.Set up DST ON first ( turn on Daylight saving function) 2.The unit will exit the Winter time and enter the Summer time at 2AM on the second Sunday of March 3. The unit will exit the Summer time and enter the Winter time at 2AM on the first Sunday of November Daily alarm set-up Press MODE to switch to Alarm1 mode, A1 and the alarm time displayed Press and hold the key MODE for 3 seconds ,the flashing alarm time are shown The hour display of the alarm time is flashing. Use MEM or HISTORY to select the hour. Press MODE to confirm. Then follow the minutes. Use MEM or HISTORY to select the minutes, Press MODE to confirm. Then press MODE to switch from A1 display to A2 display The same setting as for A2. Information The clock automatically exit setting mode if no keys are pressed for 20 seconds, value already set will be save. Daily alarm on/off Press MODE to switch from time display to Alarm 1 or Alarm 2 mode When showing A1 or A2 alarm time, press MEM or HISTORY to activate the alarm with alarm symbol showing. Press MEM or HISTORY again to cancel the alarm Information:
The clock automatically exit setting mode if no keys are pressed for 20 seconds, value already set will be save. Snooze function To activate the snooze function, follow the steps below Press the key SNOOZELIGHT, while the alarm sounds, to activate the snooze function. If the snooze function is activated, alarm symbol is flashing. The alarm repeat after 5 minutes. The snooze function can be stopped by pressing any key. Outdoor Temperature alert set-up Press the key ALERT to ON / OFF Temperature alert When the alert is on, icon displayed Press and hold the key ALERT for 3 seconds to enter alert setting, temperature alert upper limit and the icon displayed. Press MEM or HISTORY to set the upper alert temperature. Pess the key ALERT to confirm. Temperature lower limit and the icon displayed, press MEM or HISTORY to set the lower alert temperature. Pess the key ALERT to confirm. Information The clock automatically exit setting mode if no keys are pressed for 20 seconds, value already set will be save. The lower alert temperature selected must at least be 1C below the upper alert selected temperature. Temperature alert ring:
When the temperature reach the alert level and when alert turned on, the alert symbol flash with alert sound Press SNOOZE/LIGHT key to stop the alert sound, the alert symbol and corresponding temperature still flash until the temperature is out of alert range or when turn off the ALERT Max. / Min. for the indoor/outdoor temperature and humidity Press MEM to display indoor and outdoor max temperature and humidity, Press MEM again to display indoor and outdoor min temperature and humidity Hold MEM for more than 3 seconds to clear up the max./min. Weather forecast Remarks As the weather forecast is calculated by air pressure only, the display will have discrepancy with the actual weather. Currently displayed icon means the forecast for the next 1224 hours. It may not reflect the current state of the weather. Altitude setting and barometer After inserting batteries or plugged in adaptor into the weather station, or by pressing and holding the SNOOZELIGHT button, set your altitude for more precise pressure calculation. Use the MEM or HISTORY buttons to set a value in the range -190 m to 2000 m (10 m increment). , press SNOOZELIGHT to confirm. After setting the altitude, use MEM or HISTORY buttons to set the weather forecast icon, press SNOOZELIGHT to confirm For accurate barometric pressure trends, the weather station should operate at the same altitude for recordings (i.e. it should not be moved from the ground to the second floor of the house). When the unit is moved to a new location, discard readings for the 12 hours history Temperature, humidity and air pressure trends The arrow shows the trends of values of the temperature and humidity measurements on sensor or station. Indications on the display Temperature and air humidity trends Moon phase display Rising Constant Falling Icons for the main phases of the moon are as follows:
New Waxing First Waxing Full moon Waning Last Waning moon crescent quarter gibbous gibbous quarter crescent Ice Alert Indoor temperature is lower than 39.2(+4C) there is ice alert symbol showing on LCD. That means the weather start to be icy. Temperature and humidity function Indoor temp detection range:32122(0+50) RF temp range:4- 140(-20 - 60) Humidity detection range:20% - 95%
Detection cycle:30s Temp resolution +/- 0.1,humidity resolution +/- 1%
Comfort face for living room The weather station uses saved data to determine the indoor humidity in the living space to show the respective symbols for your health and home environment. Comfortable If the indoor humidity is within 4070 % RH and the temperature within 2028 C, the icon (comfortable environment) will be displayed If the indoor humidity is lower than 40 % RH, the icon (dry environment) will be displayed. If the indoor humidity is higher than 70 % RH, the icon (wet environment) will be displayed. If the temperature is not within 2028 C and humidity is within 4070% RH, no icon will be displayed. Dry Wet Low battery condition display The weather station displays the low battery condition symbol to remind the batteries of the weather station or the outdoor sensor need to be exchanged. Weather station low battery condition display: within indoor area of the display Outdoor sensor low battery condition display: in the outdoor area of the display Backlight Press and hold key HISTORY for 2 seconds to enter the a/b/c mode setting . Press the key HISTORY to choose the a/b/c mode (Default mode a). In a mode ,need to manual select the backlight color . Press SNOOZELIGHT to switch the backlight color: REDGREENBLUELIGHT GREENPURPLELIGHT BLUEWHITERED...... Press MODE to confirm In b mode , the backlight color changed with the weather forecast :
LIGHTGREEN(Sunny)RED(Partly Cloudy)GREEN(Cloudy)BLUE(Rainy)PURPLE
(Rain Storm) Press MODE to confirm In c mode , the backlight color changed with the :outdoor temperature:
Above 86 (30 )(RED)77~85.82 ( 25~29.9 )
(20~24.9 )(GREEN)50~67.82 BLUE)31.82~49.82 -0.1~-9.9BLUEBelow14 (-10) (PURPLE)
(LIGHT GREEN)68~76.82
(10~19.9 )(WHITE)32~49.82 (0~9.9 ) LIGHT Press MODE to confirm Default :Without RF ,the backlight color display RED; When the RF is received, the corresponding color is displayed. In any mode, press the SNOOZELIGHT and HISTORY keys at the same time enter into automatic color changed ,.Each color shows 7S, automatic cycle, Manually press MODE to confirm the color, and quit the automatic change mode (the program does not set the automatic exit). Backlight color switch
:REDGREENBLUELIGHT GREENPURPLELIGHT BLUEWHITERED...... Troubleshooting Display screen not working Check the batteries in main unit are inserted and power adaptor is plugged in correctly No outdoor sensor Check the batteries in sensor are inserted correctly reception Battery may need to be replaced Relocate the weather station and the sensor. The maximum transimission range is 30m without obstriction Press and hold CH key for RF reception again Try to reset the units, take the sensor near the weather station, reinstall the batteries and replug power adaptor, place the sensor outdoor until reception success Check the distance of the weather station and the sensor from the sources of interference (computer monitors or television sets). It should be at least 1.5 to 2 m during the reception of the signal. Inaccurate weather Currently displayed icon means the forecast for the next forecast 1224 hours. It may not reflect the current state of the weather. Set the correct air pressure reading For accurate barometric pressure trends, the weather station should operate at the same altitude for recordings
(i.e. it should not be moved from the ground to the second floor of the house). When the unit is moved to a new location, discard readings for the next 12 hours and correct the height adjustment if needed Wrong temperature Check whether the sensor is exposed to direct sunlight. Technical data a) Main Unit Barometer unit: hPa / inHg Barometer pressure measuring range: 850hPa to 1050hPa Weather display: Sunny, Slightly Cloudy, Cloudy, Rainy, Storm Temperature unit: C / F Temperature measurement range: 32+122 (0C to +50 C) Indoor temperature / humidity trend and max / min function Moon phase Humidity measurement range: 20 to 95%
Comfort face display Time display: 12/24 hour format Calendar: DD/MM or MM/DD Weekday in 7 languages: German, English, French, Italian, Dutch, Spanish, Danish Dual alarm with snooze function (5 minutes alarm interruption) Power supply : 3 X AAA, UM-4, LR03 1.5V batteries, DC 5.0V power adapter 7 colors back light display :REDGREENBLUELIGHT GREENPURPLELIGHT BLUEWHITE b) Outdoor sensor Transmission frequency: 433 MHz Transmission range: up to 30 m in open area with no obstruction Temperature measurement range:4- 140 (-20 C to +60 C) Humidity measurement range: 20 to 95%
Outdoor temperature / humidity trend and max / min function Power supply: 2 X AAA, UM-4, LR03 1.5V batteries Care and maintenance Read carefully the manual before using this product. Do not expose the main unit to direct sunlight, extreme cold and moisture, and sudden changes in temperature. This would reduce the accuracy of detection. Do not place the product in locations prone to vibration and shocks these may cause damage. Do not expose the product to excessive force, impacts, dust, high temperatures or humidity - these may cause malfunction, shorter battery life, damage to batteries and deformation of plastic parts. Do not expose the main unit to rain or moisture, if it is not intended for outdoor use. Do not place any open flame sources on the product, e.g. a lit candle, etc. Do not place the product to places with inadequate air flow. Do not insert any objects in the product vents. Do not tamper with the internal electric circuits of the product you may damage it, which will automatically terminate the guarantee. The product should only be repaired by a qualified professional. To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning agents - they could scratch plastic parts and damage electric circuits. Do not immerse the product in water or other liquids. The main unit may not be exposed to dripping or splashing water. In the event of damage or defect of the product, do not perform any repairs by yourself. The transmitter of the wireless indoor/outdoor thermometer works down to -20C, but at low temperatures, especially for a long period of time, the batteries may freeze, which may prevent the transmitter from transmitting the signal to the receiver and at the same time the transmission range is reduced at very low temperatures. This device is not intended for use by persons (including children) whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised or instructed regarding use of the appliance by a person responsible for their safety. It is necessary to supervise children to ensure they do not play with the device. Safety warnings Read the safety warnings carefully and only use the article as described in these instructions to avoid accidental injury or damage. Keep this manual for future reference . If you pass this product on to someone else , remember to give them these instructions. Intended use The weather station for domestic use and is not suitable for commercial purposes. Danger to Children Batteries can be highly dangerous if swallowed. Therefore ,keep batteries and weather station out of the reach of infants. If a battery has been swallowed, seek medical advice immediately. Keep packing material away from children. Risk of suffocation !
Warning-risk of injury If a battery has leaked, avoid contact with your skin, eyes and mucous membranes. If applicable, rinse the affected parts with water and consult a doctor at once. Batteries must not be charged, taken apart, thrown into fire or short-circuited. Caution-material damage Never expose the weather station to severe temperature fluctuations, moisture, direct sunlight, dust or impacts. Protect the batteries from intense heat. Remove the exhausted batteries from the weather station. This will avoid damage that can be caused by leakage. Always replace all the batteries simultaneously. Do not use different types or brands of batteries or batteries with different capacities. When inserting the batteries, ensure correct polarity (+/-). Suggest not use rechargeable batteries which not providing the required voltage. Do not use abrasive or solvent-based products to clean the weather station FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.