all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users manual rev | Users Manual | 861.76 KiB | November 07 2019 | |||
1 | Cover Letter(s) | November 07 2019 | ||||||
1 | Cover Letter(s) | November 07 2019 | ||||||
1 | External Photos | November 07 2019 | ||||||
1 | Internal Photos | November 07 2019 | ||||||
1 | ID Label/Location Info | November 07 2019 | ||||||
1 | Cover Letter(s) | November 07 2019 | ||||||
1 | RF Exposure Info | November 07 2019 | ||||||
1 | Test Report | November 07 2019 | ||||||
1 | Test Setup Photos | November 07 2019 |
1 | Users manual rev | Users Manual | 861.76 KiB | November 07 2019 |
UTM-300 UTM-300 UTM-300
- 1 -
- 1 -
- 1 -
7/10/2019 7/10/2019 7/10/2019 SENTINEL-SENSE UTM-300 SENTINEL-SENSE UTM-300 SENTINEL-SENSE UTM-300 Installation & Operation Manual - 041520 Installation & Operation Manual - 041520 Installation & Operation Manual - 041520 UTM-300 UTM-300 UTM-300
- 2 -
- 2 -
- 2 -
7/10/2019 7/10/2019 7/10/2019 COPYRIGHT ACKNOWLEDGEMENTS COPYRIGHT ACKNOWLEDGEMENTS COPYRIGHT ACKNOWLEDGEMENTS The contents of this document are the property of Applied Wireless Identifications Group, Inc. The contents of this document are the property of Applied Wireless Identifications Group, Inc. The contents of this document are the property of Applied Wireless Identifications Group, Inc.
(AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is
(AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is
(AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is strictly prohibited. For additional copies of this document please contact:
strictly prohibited. For additional copies of this document please contact:
strictly prohibited. For additional copies of this document please contact:
AWID AWID AWID 18300 Sutter Blvd 18300 Sutter Blvd 18300 Sutter Blvd Morgan Hill, CA 95037 Morgan Hill, CA 95037 Morgan Hill, CA 95037 http://www.AWID.com http://www.AWID.com http://www.AWID.com The information contained herein has been carefully checked and is believed to be accurate, The information contained herein has been carefully checked and is believed to be accurate, The information contained herein has been carefully checked and is believed to be accurate, no responsibility is assumed for inaccuracies. AWID reserves the right to make changes no responsibility is assumed for inaccuracies. AWID reserves the right to make changes no responsibility is assumed for inaccuracies. AWID reserves the right to make changes without prior notice. This document is not covered by any warranty either expressed or without prior notice. This document is not covered by any warranty either expressed or without prior notice. This document is not covered by any warranty either expressed or implied. Any comments, corrections or additions to the contents of this document should be implied. Any comments, corrections or additions to the contents of this document should be implied. Any comments, corrections or additions to the contents of this document should be directed to AWID at the above address. directed to AWID at the above address. directed to AWID at the above address. Copyright 2019 AWID, Printed in USA. Copyright 2019 AWID, Printed in USA. Copyright 2019 AWID, Printed in USA. All other trademarks are the property of their respective owners. All other trademarks are the property of their respective owners. All other trademarks are the property of their respective owners. FCC COMPLIANCE FCC COMPLIANCE FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following This device complies with Part 15 of the FCC Rules. Operation is subject to the following This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device two conditions: (1) This device may not cause harmful interference, and (2) this device two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired must accept any interference received, including interference that may cause undesired must accept any interference received, including interference that may cause undesired operation. operation. operation. This equipment has been tested and found to comply with the limits for a Class B digital This equipment has been tested and found to comply with the limits for a Class B digital This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This reasonable protection against harmful interference in a residential installation. This reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed equipment generates, uses and can radiate radio frequency energy and, if not installed equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and used in accordance with the instructions, may cause harmful interference to radio and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a communications. However, there is no guarantee that interference will not occur in a communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or particular installation. If this equipment does cause harmful interference to radio or particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the television reception, which can be determined by turning the equipment off and on, the television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
user is encouraged to try to correct the interference by one of the following measures:
user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
-
-
-
-
-
-
-
-
Reorient or relocate the receiving antenna. Reorient or relocate the receiving antenna. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Increase the separation between the equipment and receiver. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Connect the equipment into an outlet on a circuit different from that to which the Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. receiver is connected. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Consult the dealer or an experienced radio/TV technician for help. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party FCC Caution: Any changes or modifications not expressly approved by the party FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. responsible for compliance could void the user's authority to operate this equipment. responsible for compliance could void the user's authority to operate this equipment. UTM-300 UTM-300 UTM-300
- 3 -
- 3 -
- 3 -
7/10/2019 7/10/2019 7/10/2019 This transmitter must not be co-located or operating in conjunction with any other This transmitter must not be co-located or operating in conjunction with any other This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. antenna or transmitter. antenna or transmitter. Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled This equipment complies with FCC radiation exposure limits set forth for an uncontrolled This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance environment. This equipment should be installed and operated with minimum distance environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 20cm between the radiator & your body. 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
This device is intended only for OEM integrators under the following conditions:
This device is intended only for OEM integrators under the following conditions:
This transmitter is tested in a standalone mobile RF exposure condition and any co-
This transmitter is tested in a standalone mobile RF exposure condition and any co-
This transmitter is tested in a standalone mobile RF exposure condition and any co-
located or simultaneous transmission with other transmitter or portable use will need a located or simultaneous transmission with other transmitter or portable use will need a located or simultaneous transmission with other transmitter or portable use will need a separate class II permissive change re-evaluation or new certification. separate class II permissive change re-evaluation or new certification. separate class II permissive change re-evaluation or new certification. 1) The antenna must be installed such that 20 cm is maintained 1) The antenna must be installed such that 20 cm is maintained 1) The antenna must be installed such that 20 cm is maintained betweenthe antenna and users. betweenthe antenna and users. betweenthe antenna and users. 2) The transmitter module may not be co-located with any other 2) The transmitter module may not be co-located with any other 2) The transmitter module may not be co-located with any other transmitteror antenna(s). transmitteror antenna(s). transmitteror antenna(s). 3) This module is certified under 15.407 only;Compliance to Part 15 3) This module is certified under 15.407 only;Compliance to Part 15 3) This module is certified under 15.407 only;Compliance to Part 15 Subpart B (Unintentional Radiators) is not included and needs to be Subpart B (Unintentional Radiators) is not included and needs to be Subpart B (Unintentional Radiators) is not included and needs to be addressed separately by the final OEM integrator in the final host. addressed separately by the final OEM integrator in the final host. addressed separately by the final OEM integrator in the final host. 4) This module has been tested with following antenna(s), use of other 4) This module has been tested with following antenna(s), use of other 4) This module has been tested with following antenna(s), use of other antenna (except tested same type with equal or lower antenna gain) will antenna (except tested same type with equal or lower antenna gain) will antenna (except tested same type with equal or lower antenna gain) will require a separate class II permissive change re-evaluation. require a separate class II permissive change re-evaluation. require a separate class II permissive change re-evaluation. As long as the above 4 conditions are met, further transmitter test will not be As long as the above 4 conditions are met, further transmitter test will not be As long as the above 4 conditions are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-
required. However, the OEM integrator is still responsible for testing their end-
required. However, the OEM integrator is still responsible for testing their end-
product for any additional compliance requirements required with this module product for any additional compliance requirements required with this module product for any additional compliance requirements required with this module installed. installed. installed. IMPORTANT NOTE: In the event that these conditions cannot be met (for example IMPORTANT NOTE: In the event that these conditions cannot be met (for example IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC certain laptop configurations or co-location with another transmitter), then the FCC certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final authorization is no longer considered valid and the FCC ID cannot be used on the final authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating product. In these circumstances, the OEM integrator will be responsible for re-evaluating product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. the end product (including the transmitter) and obtaining a separate FCC authorization. the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling End Product Labeling End Product Labeling This transmitter module is authorized only for use in device where the antenna may be This transmitter module is authorized only for use in device where the antenna may be This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final installed such that 20 cm may be maintained between the antenna and users. The final installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID:
end product must be labeled in a visible area with the following: Contains FCC ID:
end product must be labeled in a visible area with the following: Contains FCC ID:
OGSUTM300. The grantee's FCC ID can be used only when all FCC compliance OGSUTM300. The grantee's FCC ID can be used only when all FCC compliance OGSUTM300. The grantee's FCC ID can be used only when all FCC compliance requirements are met. requirements are met. requirements are met. Manual InformationTo the End User Manual InformationTo the End User Manual InformationTo the End User UTM-300 UTM-300 UTM-300
- 4 -
- 4 -
- 4 -
7/10/2019 7/10/2019 7/10/2019 The OEM integrator has to be aware not to provide information to the end user The OEM integrator has to be aware not to provide information to the end user The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end regarding how to install or remove this RF module in the users manual of the end regarding how to install or remove this RF module in the users manual of the end product which integrates this module. product which integrates this module. product which integrates this module. The end user manual shall include all required regulatory information/warning as shown The end user manual shall include all required regulatory information/warning as shown The end user manual shall include all required regulatory information/warning as shown in this manual. in this manual. in this manual. UTM-300 UTM-300 UTM-300
- 5 -
- 5 -
- 5 -
7/10/2019 7/10/2019 7/10/2019 INDUSTRY CANADA COMPLIANCE INDUSTRY CANADA COMPLIANCE INDUSTRY CANADA COMPLIANCE This device complies with RSS-210 of the Industry Canada Rules. Operation is subject This device complies with RSS-210 of the Industry Canada Rules. Operation is subject This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and to the following two conditions: (1) This device may not cause harmful interference, and to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
(2) this device must accept any interference received, including interference that may
(2) this device must accept any interference received, including interference that may cause undesired operation. cause undesired operation. cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. provoquer un fonctionnement indsirable. provoquer un fonctionnement indsirable. Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled This equipment complies with IC radiation exposure limits set forth for an uncontrolled This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance environment. This equipment should be installed and operated with minimum distance environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 20cm between the radiator & your body. 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Dclaration d'exposition aux radiations:
Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un pour un environnement non contrl. Cet quipement doit tre install et utilis avec un pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. minimum de 20 cm de distance entre la source de rayonnement et votre corps. minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module This device is intended only for OEM integrators under the following conditions: (For module This device is intended only for OEM integrators under the following conditions: (For module device use) device use) device use) 1) The antenna must be installed such that 20 cm is maintained between the 1) The antenna must be installed such that 20 cm is maintained between the 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and antenna and users, and antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or 2) The transmitter module may not be co-located with any other transmitter or 2) The transmitter module may not be co-located with any other transmitter or antenna. antenna. antenna. As long as the 2 conditions above are met, further transmitter test will not be As long as the 2 conditions above are met, further transmitter test will not be As long as the 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-
required. However, the OEM integrator is still responsible for testing their end-
required. However, the OEM integrator is still responsible for testing their end-
product for any additional compliance requirements required with this module product for any additional compliance requirements required with this module product for any additional compliance requirements required with this module installed. installed. installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) utilisation de dispositif module) utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et respecte entre l'antenne et les utilisateurs, et respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou 2) Le module metteur peut ne pas tre complant avec un autre metteur ou 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. antenne. antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est UTM-300 UTM-300 UTM-300
- 6 -
- 6 -
- 6 -
7/10/2019 7/10/2019 7/10/2019 toujours responsable des essais sur son produit final pour toutes exigences de toujours responsable des essais sur son produit final pour toutes exigences de toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. conformit supplmentaires requis pour ce module install. conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
IMPORTANT NOTE:
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop In the event that these conditions can not be met (for example certain laptop In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is configurations or co-location with another transmitter), then the Canada authorization is configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these no longer considered valid and the IC ID cannot be used on the final product. In these no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product circumstances, the OEM integrator will be responsible for re-evaluating the end product circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization.
(including the transmitter) and obtaining a separate Canada authorization.
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
NOTE IMPORTANTE:
NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre configurations d'ordinateur portable ou de certaines co-localisation avec un autre configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. autorisation distincte au Canada. autorisation distincte au Canada. End Product Labeling End Product Labeling End Product Labeling This transmitter module is authorized only for use in device where the antenna may be This transmitter module is authorized only for use in device where the antenna may be This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final installed such that 20 cm may be maintained between the antenna and users. The final installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 6449A-
end product must be labeled in a visible area with the following: Contains IC: 6449A-
end product must be labeled in a visible area with the following: Contains IC: 6449A-
UTM300"
UTM300"
UTM300"
Plaque signaltique du produit final Plaque signaltique du produit final Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 6449A-UTM300". visible avec l'inscription suivante: "Contient des IC: 6449A-UTM300". visible avec l'inscription suivante: "Contient des IC: 6449A-UTM300". Manual InformationTo End User Manual InformationTo End User Manual InformationTo End User The OEM integrator has to be aware not to provide information to the end user The OEM integrator has to be aware not to provide information to the end user The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end regarding how to install or remove this RF module in the users manual of the end regarding how to install or remove this RF module in the users manual of the end product which integrates this module. product which integrates this module. product which integrates this module. The end user manual shall include all required regulatory information/warning as shown The end user manual shall include all required regulatory information/warning as shown The end user manual shall include all required regulatory information/warning as shown in this manual. in this manual. in this manual. Manuel d'information l'utilisateur final Manuel d'information l'utilisateur final Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de final quant la faon d'installer ou de supprimer ce module RF dans le manuel de final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. l'utilisateur du produit final qui intgre ce module. l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. requises et avertissements comme indiqu dans ce manuel. requises et avertissements comme indiqu dans ce manuel. UTM-300 UTM-300 UTM-300
- 7 -
- 7 -
- 7 -
7/10/2019 7/10/2019 7/10/2019 1 1 1 2 2 2 Table of Contents Table of Contents Table of Contents 1.1 1.1 1.1 REVISION HISTORY....................................................................................................8 REVISION HISTORY....................................................................................................8 REVISION HISTORY....................................................................................................8 INTRODUCTION.......................................................................................................9 INTRODUCTION.......................................................................................................9 INTRODUCTION.......................................................................................................9 Special Features ................................................................................................9 Special Features ................................................................................................9 Special Features ................................................................................................9 SPECIFICATIONS ..................................................................................................10 SPECIFICATIONS ..................................................................................................10 SPECIFICATIONS ..................................................................................................10 Channel Frequency Table................................................................................10 Channel Frequency Table................................................................................10 Channel Frequency Table................................................................................10 Connector Pin Assignment...............................................................................11 Connector Pin Assignment...............................................................................11 Connector Pin Assignment...............................................................................11 Form Factor .....................................................................................................11 Form Factor .....................................................................................................11 Form Factor .....................................................................................................11 Input Votage/Current........................................................................................12 Input Votage/Current........................................................................................12 Input Votage/Current........................................................................................12 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.4 NOTE: READ AND USE THIS MANUAL. NOTE: READ AND USE THIS MANUAL. NOTE: READ AND USE THIS MANUAL. NOTE: FAILURE TO FOLLOW THE INSTALLATION GUIDE MAY RESULT IN NOTE: FAILURE TO FOLLOW THE INSTALLATION GUIDE MAY RESULT IN NOTE: FAILURE TO FOLLOW THE INSTALLATION GUIDE MAY RESULT IN POOR PERFORMANCE OR EVEN CAUSE PERMANENT DAMAGE TO THE POOR PERFORMANCE OR EVEN CAUSE PERMANENT DAMAGE TO THE POOR PERFORMANCE OR EVEN CAUSE PERMANENT DAMAGE TO THE READER, THUS VOIDS THE PRODUCT WARRANTY. READER, THUS VOIDS THE PRODUCT WARRANTY. READER, THUS VOIDS THE PRODUCT WARRANTY. UTM-300 UTM-300 UTM-300
- 8 -
- 8 -
- 8 -
7/10/2019 7/10/2019 7/10/2019 REVISION HISTORY REVISION HISTORY REVISION HISTORY Version Version Version No. No. No. 1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 Revised By Revised By Revised By AWID Engineering AWID Engineering AWID Engineering AWID Engineering AWID Engineering AWID Engineering AWID Engineering AWID Engineering AWID Engineering Date Date Date 3/2019 3/2019 3/2019 6/2019 6/2019 6/2019 7/2019 7/2019 7/2019 Sections Sections Sections Affected Affected Affected
-
-
-
-
-
-
P. 2 P. 2 P. 2 Remarks Remarks Remarks Initial version Initial version Initial version Updated with FCC ID,IC Updated with FCC ID,IC Updated with FCC ID,IC Updated per FCC testing review Updated per FCC testing review Updated per FCC testing review UTM-300 UTM-300 UTM-300
- 9 -
- 9 -
- 9 -
7/10/2019 7/10/2019 7/10/2019 1 1 1 INTRODUCTION INTRODUCTION INTRODUCTION AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of working with most leading passive UHF tags. The reader module comes with a unique working with most leading passive UHF tags. The reader module comes with a unique working with most leading passive UHF tags. The reader module comes with a unique combination of antenna port, small size, and low power consumption. Its primary combination of antenna port, small size, and low power consumption. Its primary combination of antenna port, small size, and low power consumption. Its primary functions are in asset management and tracking, and fleet management, i.e., embedded functions are in asset management and tracking, and fleet management, i.e., embedded functions are in asset management and tracking, and fleet management, i.e., embedded applications for PoS, printers and other portable devices widely used in these markets. applications for PoS, printers and other portable devices widely used in these markets. applications for PoS, printers and other portable devices widely used in these markets. UTM-300 is delivered with Firmware Version such as 12.xx.xx. UTM-300 is delivered with Firmware Version such as 12.xx.xx. UTM-300 is delivered with Firmware Version such as 12.xx.xx. In order to operate a UTM-300 you will need the following:
In order to operate a UTM-300 you will need the following:
In order to operate a UTM-300 you will need the following:
PC running Windows1 XP or higher, CD-ROM drive PC running Windows1 XP or higher, CD-ROM drive PC running Windows1 XP or higher, CD-ROM drive Host software (AWIDs demo software or your own custom software) Host software (AWIDs demo software or your own custom software) Host software (AWIDs demo software or your own custom software) 1.1 SPECIAL FEATURES 1.1 SPECIAL FEATURES 1.1 SPECIAL FEATURES EPC Global Class 1 Gen 2 Protocol EPC Global Class 1 Gen 2 Protocol EPC Global Class 1 Gen 2 Protocol Thin passive tags with long-range performance Thin passive tags with long-range performance Thin passive tags with long-range performance Low power consumption & compact design for portable & embedded applications Low power consumption & compact design for portable & embedded applications Low power consumption & compact design for portable & embedded applications 3.3 V (5.0V tolerable) Serial TTL logical interface 3.3 V (5.0V tolerable) Serial TTL logical interface 3.3 V (5.0V tolerable) Serial TTL logical interface 1 Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and 1 Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and 1 Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and FW upgrade programs are applications to run in Windows. FW upgrade programs are applications to run in Windows. FW upgrade programs are applications to run in Windows. UTM-300 UTM-300 UTM-300
- 10 -
- 10 -
- 10 -
7/10/2019 7/10/2019 7/10/2019 2 SPECIFICATIONS 2 SPECIFICATIONS 2 SPECIFICATIONS Input voltage Input voltage Input voltage Input current Input current Input current Protocol language Protocol language Protocol language Read range Read range Read range RF connectors RF connectors RF connectors Output power Output power Output power Transmit frequency Transmit frequency Transmit frequency Receiver frequency Receiver frequency Receiver frequency Hopping channels Hopping channels Hopping channels Channel spacing Channel spacing Channel spacing Hopping sequence Hopping sequence Hopping sequence Operating temperature range Operating temperature range Operating temperature range Output data formats Output data formats Output data formats Interface Connector Interface Connector Interface Connector Dimension Dimension Dimension
(*) depends on heat sink size
(*) depends on heat sink size
(*) depends on heat sink size
+4.75 ~ +5.25 VDC
+4.75 ~ +5.25 VDC
+4.75 ~ +5.25 VDC 700 mA 700 mA 700 mA EPC Class 1 Gen 2 EPC Class 1 Gen 2 EPC Class 1 Gen 2
~ 20 ft (6 m) antenna and tag dependent
~ 20 ft (6 m) antenna and tag dependent
~ 20 ft (6 m) antenna and tag dependent U.FL (UMC) SWR<1.2 @50OHMs U.FL (UMC) SWR<1.2 @50OHMs U.FL (UMC) SWR<1.2 @50OHMs
+27 dBm max
+27 dBm max
+27 dBm max 902.60-927.40 MHz 902.60-927.40 MHz 902.60-927.40 MHz 902.60-927.40 MHz (Amplitude Modulated) 902.60-927.40 MHz (Amplitude Modulated) 902.60-927.40 MHz (Amplitude Modulated) 125 Channels 125 Channels 125 Channels 200 kHz typical 200 kHz typical 200 kHz typical Pseudo random Pseudo random Pseudo random
-30 C to +65 C (-22 F to 149 F) (*)
-30 C to +65 C (-22 F to 149 F) (*)
-30 C to +65 C (-22 F to 149 F) (*) 3.3V TTL Serial 3.3V TTL Serial 3.3V TTL Serial 44 edge solder pads 44 edge solder pads 44 edge solder pads 1.6x1.0x0.2 1.6x1.0x0.2 1.6x1.0x0.2 2.1 CHANNEL FREQUENCY TABLE 2.1 CHANNEL FREQUENCY TABLE 2.1 CHANNEL FREQUENCY TABLE Frequency range: 902.60 ~ 927.40 MHz Frequency range: 902.60 ~ 927.40 MHz Frequency range: 902.60 ~ 927.40 MHz Minimum number of frequency channels: 125 Minimum number of frequency channels: 125 Minimum number of frequency channels: 125 CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz CH 902~928 MHz 922.60 MHz 922.60 MHz 922.60 MHz 922.80 MHz 922.80 MHz 922.80 MHz 923.00 MHz 923.00 MHz 923.00 MHz 923.20 MHz 923.20 MHz 923.20 MHz 923.40 MHz 923.40 MHz 923.40 MHz 923.60 MHz 923.60 MHz 923.60 MHz 923.80 MHz 923.80 MHz 923.80 MHz 924.00 MHz 924.00 MHz 924.00 MHz 924.20 MHz 924.20 MHz 924.20 MHz 924.40 MHz 924.40 MHz 924.40 MHz 924.60 MHz 924.60 MHz 924.60 MHz 924.80 MHz 924.80 MHz 924.80 MHz 925.00 MHz 925.00 MHz 925.00 MHz 925.20 MHz 925.20 MHz 925.20 MHz 925.40 MHz 925.40 MHz 925.40 MHz 925.60 MHz 925.60 MHz 925.60 MHz 925.80 MHz 925.80 MHz 925.80 MHz 926.00 MHz 926.00 MHz 926.00 MHz 926.20 MHz 926.20 MHz 926.20 MHz 926.40 MHz 926.40 MHz 926.40 MHz 926.60 MHz 926.60 MHz 926.60 MHz 926.80 MHz 926.80 MHz 926.80 MHz 927.00 MHz 927.00 MHz 927.00 MHz 927.20 MHz 927.20 MHz 927.20 MHz 927.40 MHz 927.40 MHz 927.40 MHz 917.60 MHz 100 917.60 MHz 100 917.60 MHz 100 917.80 MHz 101 917.80 MHz 101 917.80 MHz 101 918.00 MHz 102 918.00 MHz 102 918.00 MHz 102 918.20 MHz 103 918.20 MHz 103 918.20 MHz 103 918.40 MHz 104 918.40 MHz 104 918.40 MHz 104 918.60 MHz 105 918.60 MHz 105 918.60 MHz 105 918.80 MHz 106 918.80 MHz 106 918.80 MHz 106 919.00 MHz 107 919.00 MHz 107 919.00 MHz 107 919.20 MHz 108 919.20 MHz 108 919.20 MHz 108 919.40 MHz 109 919.40 MHz 109 919.40 MHz 109 919.60 MHz 110 919.60 MHz 110 919.60 MHz 110 919.80 MHz 111 919.80 MHz 111 919.80 MHz 111 920.00 MHz 112 920.00 MHz 112 920.00 MHz 112 920.20 MHz 113 920.20 MHz 113 920.20 MHz 113 920.40 MHz 114 920.40 MHz 114 920.40 MHz 114 920.60 MHz 115 920.60 MHz 115 920.60 MHz 115 920.80 MHz 116 920.80 MHz 116 920.80 MHz 116 921.00 MHz 117 921.00 MHz 117 921.00 MHz 117 921.20 MHz 118 921.20 MHz 118 921.20 MHz 118 921.40 MHz 119 921.40 MHz 119 921.40 MHz 119 921.60 MHz 120 921.60 MHz 120 921.60 MHz 120 921.80 MHz 121 921.80 MHz 121 921.80 MHz 121 922.00 MHz 122 922.00 MHz 122 922.00 MHz 122 922.20 MHz 123 922.20 MHz 123 922.20 MHz 123 922.40 MHz 124 922.40 MHz 124 922.40 MHz 124 912.60 MHz 912.60 MHz 912.60 MHz 912.80 MHz 912.80 MHz 912.80 MHz 913.00 MHz 913.00 MHz 913.00 MHz 913.20 MHz 913.20 MHz 913.20 MHz 913.40 MHz 913.40 MHz 913.40 MHz 913.60 MHz 913.60 MHz 913.60 MHz 913.80 MHz 913.80 MHz 913.80 MHz 914.00 MHz 914.00 MHz 914.00 MHz 914.20 MHz 914.20 MHz 914.20 MHz 914.40 MHz 914.40 MHz 914.40 MHz 914.60 MHz 914.60 MHz 914.60 MHz 914.80 MHz 914.80 MHz 914.80 MHz 915.00 MHz 915.00 MHz 915.00 MHz 915.20 MHz 915.20 MHz 915.20 MHz 915.40 MHz 915.40 MHz 915.40 MHz 915.60 MHz 915.60 MHz 915.60 MHz 915.80 MHz 915.80 MHz 915.80 MHz 916.00 MHz 916.00 MHz 916.00 MHz 916.20 MHz 916.20 MHz 916.20 MHz 916.40 MHz 916.40 MHz 916.40 MHz 916.60 MHz 916.60 MHz 916.60 MHz 916.80 MHz 916.80 MHz 916.80 MHz 917.00 MHz 917.00 MHz 917.00 MHz 917.20 MHz 917.20 MHz 917.20 MHz 917.40 MHz 917.40 MHz 917.40 MHz 907.60 MHz 907.60 MHz 907.60 MHz 907.80 MHz 907.80 MHz 907.80 MHz 908.00 MHz 908.00 MHz 908.00 MHz 908.20 MHz 908.20 MHz 908.20 MHz 908.40 MHz 908.40 MHz 908.40 MHz 908.60 MHz 908.60 MHz 908.60 MHz 908.80 MHz 908.80 MHz 908.80 MHz 909.00 MHz 909.00 MHz 909.00 MHz 909.20 MHz 909.20 MHz 909.20 MHz 909.40 MHz 909.40 MHz 909.40 MHz 909.60 MHz 909.60 MHz 909.60 MHz 909.80 MHz 909.80 MHz 909.80 MHz 910.00 MHz 910.00 MHz 910.00 MHz 910.20 MHz 910.20 MHz 910.20 MHz 910.40 MHz 910.40 MHz 910.40 MHz 910.60 MHz 910.60 MHz 910.60 MHz 910.80 MHz 910.80 MHz 910.80 MHz 911.00 MHz 911.00 MHz 911.00 MHz 911.20 MHz 911.20 MHz 911.20 MHz 911.40 MHz 911.40 MHz 911.40 MHz 911.60 MHz 911.60 MHz 911.60 MHz 911.80 MHz 911.80 MHz 911.80 MHz 912.00 MHz 912.00 MHz 912.00 MHz 912.20 MHz 912.20 MHz 912.20 MHz 912.40 MHz 912.40 MHz 912.40 MHz 902.60 MHz 902.60 MHz 902.60 MHz 902.80 MHz 902.80 MHz 902.80 MHz 903.00 MHz 903.00 MHz 903.00 MHz 903.20 MHz 903.20 MHz 903.20 MHz 903.40 MHz 903.40 MHz 903.40 MHz 903.60 MHz 903.60 MHz 903.60 MHz 903.80 MHz 903.80 MHz 903.80 MHz 904.00 MHz 904.00 MHz 904.00 MHz 904.20 MHz 904.20 MHz 904.20 MHz 904.40 MHz 904.40 MHz 904.40 MHz 904.60 MHz 904.60 MHz 904.60 MHz 904.80 MHz 904.80 MHz 904.80 MHz 905.00 MHz 905.00 MHz 905.00 MHz 905.20 MHz 905.20 MHz 905.20 MHz 905.40 MHz 905.40 MHz 905.40 MHz 905.60 MHz 905.60 MHz 905.60 MHz 905.80 MHz 905.80 MHz 905.80 MHz 906.00 MHz 906.00 MHz 906.00 MHz 906.20 MHz 906.20 MHz 906.20 MHz 906.40 MHz 906.40 MHz 906.40 MHz 906.60 MHz 906.60 MHz 906.60 MHz 906.80 MHz 906.80 MHz 906.80 MHz 907.00 MHz 907.00 MHz 907.00 MHz 907.20 MHz 907.20 MHz 907.20 MHz 907.40 MHz 907.40 MHz 907.40 MHz 0 0 0 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 16 16 16 17 17 17 18 18 18 19 19 19 20 20 20 21 21 21 22 22 22 23 23 23 24 24 24 25 25 25 26 26 26 27 27 27 28 28 28 29 29 29 30 30 30 31 31 31 32 32 32 33 33 33 34 34 34 35 35 35 36 36 36 37 37 37 38 38 38 39 39 39 40 40 40 41 41 41 42 42 42 43 43 43 44 44 44 45 45 45 46 46 46 47 47 47 48 48 48 49 49 49 75 75 75 76 76 76 77 77 77 78 78 78 79 79 79 80 80 80 81 81 81 82 82 82 83 83 83 84 84 84 85 85 85 86 86 86 87 87 87 88 88 88 89 89 89 90 90 90 91 91 91 92 92 92 93 93 93 94 94 94 95 95 95 96 96 96 97 97 97 98 98 98 99 99 99 50 50 50 51 51 51 52 52 52 53 53 53 54 54 54 55 55 55 56 56 56 57 57 57 58 58 58 59 59 59 60 60 60 61 61 61 62 62 62 63 63 63 64 64 64 65 65 65 66 66 66 67 67 67 68 68 68 69 69 69 70 70 70 71 71 71 72 72 72 73 73 73 74 74 74 Table 1 Channel Frequency Table for UTM-300 Table 1 Channel Frequency Table for UTM-300 Table 1 Channel Frequency Table for UTM-300 UTM-300 UTM-300 UTM-300
- 11 -
- 11 -
- 11 -
7/10/2019 7/10/2019 7/10/2019 2.2 CONNECTOR PIN ASSIGNMENT 2.2 CONNECTOR PIN ASSIGNMENT 2.2 CONNECTOR PIN ASSIGNMENT ANT ANT ANT ENBL ENBL ENBL RXD RXD RXD TXD TXD TXD LED GREEN LED GREEN LED GREEN LED RED LED RED LED RED VIN VIN VIN Antenna Port Antenna Port Antenna Port Power ON/OFF Signal, VDD for ON, GND for OFF (*) Power ON/OFF Signal, VDD for ON, GND for OFF (*) Power ON/OFF Signal, VDD for ON, GND for OFF (*) Serial Communication In (3.3V) Serial Communication In (3.3V) Serial Communication In (3.3V) Serial Communication Out (3.3V) Serial Communication Out (3.3V) Serial Communication Out (3.3V) Green LED Signal Hi (2.5V) on Good Tag Read (blinking) Green LED Signal Hi (2.5V) on Good Tag Read (blinking) Green LED Signal Hi (2.5V) on Good Tag Read (blinking) Red LED Signal Hi (2.5V) when Power On (constant visual) Red LED Signal Hi (2.5V) when Power On (constant visual) Red LED Signal Hi (2.5V) when Power On (constant visual) 4.75~5.25V 4.75~5.25V 4.75~5.25V
(*): ENBL pulled high to enable module. Tied to power for Always-On
(*): ENBL pulled high to enable module. Tied to power for Always-On
(*): ENBL pulled high to enable module. Tied to power for Always-On applications. applications. applications. 2.3 FORM FACTOR 2.3 FORM FACTOR 2.3 FORM FACTOR UTM-300 UTM-300 UTM-300
- 12 -
- 12 -
- 12 -
7/10/2019 7/10/2019 7/10/2019 2.4 INPUT VOTAGE/CURRENT 2.4 INPUT VOTAGE/CURRENT 2.4 INPUT VOTAGE/CURRENT Table below shows input current (in mA) with input voltage applied at different RF Power Table below shows input current (in mA) with input voltage applied at different RF Power Table below shows input current (in mA) with input voltage applied at different RF Power
(Level Index) Settings.
(Level Index) Settings.
(Level Index) Settings. Index Index Index 0 0 0 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 RF Output RF Output RF Output Power (dBm) Power (dBm) Power (dBm) 13.5 13.5 13.5 14.3 14.3 14.3 15.3 15.3 15.3 16.1 16.1 16.1 17.2 17.2 17.2 18.0 18.0 18.0 19.1 19.1 19.1 19.9 19.9 19.9 21.2 21.2 21.2 22.0 22.0 22.0 23.0 23.0 23.0 23.8 23.8 23.8 24.8 24.8 24.8 25.6 25.6 25.6 26.5 26.5 26.5 27.2 27.2 27.2 5V [A]
5V [A]
5V [A]
0.22 0.22 0.22 0.22 0.22 0.22 0.23 0.23 0.23 0.24 0.24 0.24 0.26 0.26 0.26 0.27 0.27 0.27 0.29 0.29 0.29 0.31 0.31 0.31 0.34 0.34 0.34 0.36 0.36 0.36 0.39 0.39 0.39 0.41 0.41 0.41 0.45 0.45 0.45 0.48 0.48 0.48 0.53 0.53 0.53 0.56 0.56 0.56
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-07-11 | 902.6 ~ 927.4 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-07-11
|
||||
1 | Applicant's complete, legal business name |
Applied Wireless Identifications Group Inc.
|
||||
1 | FCC Registration Number (FRN) |
0012350286
|
||||
1 | Physical Address |
18300 Sutter Blvd
|
||||
1 |
Morgan Hill, California 95037
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@nacsemc.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OGS
|
||||
1 | Equipment Product Code |
UTM300
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
E******** H******
|
||||
1 | Title |
CTO
|
||||
1 | Telephone Number |
408-8******** Extension:
|
||||
1 | Fax Number |
408-7********
|
||||
1 |
e******@awid.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UTM-300 UHF RFID Reader Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||
1 | Name |
E**** L****
|
||||
1 | Telephone Number |
+886-********
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
e******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.60000000 | 927.40000000 | 0.6280000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC