FCC ID: L2C2F5TR FMCW Radar

The device under test is manufactured by the grantee (APTIV Services US LLC), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. APTIV Services US LLC will supply this document to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USERS MANUAL The following information (in blue) must be included in the end-product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.

FCC ID: L2C2F5TR IC: 3432A-2F5TR This device complies with Part 95 of the FCC Rules and with ISED Canada license-

exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

February 23, 2022 re: FCC ID: L2C2F5TR, IC: 3432A-2F5TR To Whom It May Concern:

Authority to Act as Agent and REL Listing We appoint Joseph D. Brunett on behalf of Willow Run Test Labs, Inc. and Amber Helm Development, LC and Bradley J. Koski on behalf of Wireless Approval Consultants to act as our agent(s) in the preparation of this application for equipment certification and/or EU/UKCA Notified Body type examination. We certify that submitted documents properly describe the device or system for which equipment certification is sought. We also certify that each unit manufactured, imported, or marketed (as defined in Industry Canadas regulations) will have affixed to it a label identical to that submitted for approval with this application. Further, in accordance with section 6.5 of IC CB -02, we hereby acknowledge that our companys product cannot be distributed, leased, or offered for sale in Canada until its listed on the Industry Canada Radio Equipment List (REL). For instances where our authorized agent signs the application for certification on our behalf, we acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American Certification Body, Inc. and/or TUV Rheinland Group and/or Vista Laboratories, Inc. still resides with APTIV Services US LLC. For TCB applications, we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) regarding certified equipment. 23 February 2022 ___________ _____________ __

(Signature) Brian W. Johnson Dated:

By:

Title:

E-mail:

On behalf of:

Engineering Group Manager brian.w.johnson@aptiv.com APTIV Services US LLC 13085 Hamilton Crossing Blvd Carmel, Indiana, 46032 United States of America Telephone: +1 765 867 4179 5 Hanover Quay | Grand Canal | Dublin 2 | Ireland

WHOM it may concern!

Aptiv Services US, LLC Ljiljana Trivic Ljiljana.Trivic@Aptiv.com Phone +49 2261 971 415 Date: 04st March 2022 Request for long term confidentiality of the Internal photos for our short range radar sensor:

L2C2F5TR Dear Sirs, This letter references 0.457 (d) and 0.459 of FCC Rules as the authority for requesting confidentiality. APTIV would like to obtain long term confidentiality for the NON-Disclosure Agreement (NDA) document itself and the internal photos for the product with FCC ID: L2C2F5TR This request of confidentiality is submitted because internal photos contain RF integrated circuit board layout patterns, antenna designs and antenna distribution networks, which are trade secrets and shall not be accessible to users of the public. The devices cannot be opened without special tools. In addition the device is not being sold separately from the vehicle. The installation of the device can only be done through licensed distributors under NDA. In those cases APTIV has signed NDA documents with customers and/or suppliers. For that reasons internal photos submitted to FCC shall never be available for public or disclosed to unauthorized persons. Only APTIV employees have access to these internal photos and devices or customers/suppliers under NDA. All sales in regards to these devices have to be under NDA, restricting the disclosure of the propriety information including the internal photos. The NDA between APTIV and our business partners includes secret business agreements which we would like to stress again. Internal photos have to be treated in the category of permanent confidentiality under a NDA. The NDA document itself shall also be kept permanent confidential. Yours Sincerely Brian W. Johnson EGM EMC Design brian.w.johnson@aptiv.com

(765) 867-4179 Aptiv Services US, LLC 13085 Hamilton Crossing Boulevard Carmel, Indiana 46032 USA www.Aptiv.com

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Re: Certication for Aptiv Services US, LLC FCC ID: L2C2F5TR IC: 3432A-2F5TR REQUEST FOR CONFIDENTIALITY Pursuant to USA FCC 47 CFR 0.457(d) and 0.459 and Canada IC RSP-100, Section 10, Aptiv Services US, LLC requests that a part of the subject application be held condential. Aptiv Services US, LLC has spent substantial eort in developing this product and it is one of the rst of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in nancial hardship. Exhibit Conf. Type Rational Exh 03 - External Photos STC-180days Includes product information. Exh 04 - Block Diagram LTC Exh 05 - Schematics LTC Exh 07 - Test Setup Photos STC-180days Includes product information. Exh 08 - Users Manual STC-180days Includes product information. LTC Exh 09 - Internal Photos Exh 10 - Parts List, Tune, Place LTC Exh 12 - Description of Op. Exh 12 - Modes of Op. STC-180days Includes product information. LTC Proprietary - NDA (KDB 726920 D01 II,3(a)) Includes proprietary design information. Includes proprietary design information. Includes proprietary internal oscillator frequency information. Includes proprietary design information Long Term Condentiality (Permanent): Aptiv Services US, LLC requests that any exhibits listed above as permanently condential be permanently withheld from public review. Wherein Long Term Condentiality is not an option for specic exhibits with ISED, this request applies only to the FCC application for those exhibits. Short-Term Condentiality (FCC Only): Aptiv Services US, LLC requests that any exhibits selected above as short term condential be withheld from public view for a period of days (noted above) from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc.

Operational Description:

The Device Under Test (DUT) is a 76 to 77 GHz vehicular radar. The device employs a dynamic chirp modulated transmit array. Multiple receive antennas are used to determine target angular resolution through digital beam forming. When installed on a vehicle, the device will operate when the vehicle is running. The nominal operating voltage is 12.0 VDC. October, 18th 2019

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Certication and Engineering Bureau, Innovation, Science and Economic Development Canada 3701 Carling Avenue, Bldg. 94 Ottawa, Ontario K2H 8S2 Re: Certication for Aptiv Services US, LLC 2F5TR IC: 3432A-2F5TR If necessary, we have enclosed application materials for certication of Aptiv Services US, LLC 2F5TR. It has been veried to comply with ISED RSS-251 version 2. Current Variants:

There is only a single variant of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 11 Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 Re: Certication for Aptiv Services US, LLC 2F5TR FCC ID: L2C2F5TR Current Variants:

There is only a single variant of the EUT, as tested. If necessary, we have enclosed application materials for certication of Aptiv Services US, LLC 2F5TR. It has been veried to comply with CFR Title 47, Part 95 Subpart M. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 10