FCC ID: WBQ-SWA6MINI Bluetooth Subwoofer with Power Supply

USER MANAUL Harness Connections The ACC will need a 12V constant power to turn the unit ON. The yellow and the black will be connected to a 12V dc supply. Locations of controls 1. Use AUX level selector to set the AUX input. 2. Connect your player to the Subwoofer with Bluetooth or using the AUX input. 3. A 8-pin DIN connector is used to connected to a remote dongle (not included) so that you can control the subwoofer remotely. 4. A SMA connector is used to connect to an Antenna for extended range 5. The USB cable provide a 5V voltage @2.1A Connecting to Bluetooth The default mode of SWA8-6BT is Bluetooth mode. If there is no device connected to the Bluetooth, you can use the AUX input. Bluetooth will always be at higher priority than AUX input. AUX will only be playing music if no bluetooth is playing. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communciations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation

AQUATIC AV Agent Authorization Company: AQUATIC AV Address: 282 KINNEY DRIVE, SAN JOSE, CA 95112, USA Product Name: Bluetooth Subwoofer with Power Supply Model Number(s): SWA6mini, SW630 Product Description: Bluetooth Subwoofer with Power Supply We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021-01-11 Name:

Robert L. Fils Company: AQUATIC AV

AQUATIC AV Jan.11, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : WBQ-SWA6MINI Model Number: SWA6mini, SW630 To Whom It May Concern:

We, The AQUATIC AV hereby declare that the model : SW630 is identical with the model : SWA6mini, except the model name. Except for the different above, no other modification is performed. Sincerely, Signature:

AQUATIC AV Contact person: Robert L. Fils

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA AQUATIC AV Date: 2021-01-05 Subject; Request for Confidentiality FCC ID: WBQ-SWA6MINI To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely AQUATIC AV Contact person: Robert L. Fils