FCC ID: WBQ-SM78N WATERPROOF MEDIA PLAYER

products with a watertight reputation AQ-MP-5BT-H - WATERPROOF MEDIA PLAYER for Bluetooth & MP3 devices USER / INSTALLATION MANUAL Replaces Factory Radio on Harley-Davidson Motorcycles

(Models 1998-2013) USB charging Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.com products with a watertight reputation PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION Table of Contents Media Player AQ-MP-5BT-H FCC Statement Media Player AQ-MP-5BT-H 1 Getting Started......................................................................................................................... 3 3 1.1 Contents............................................................................................................................. 3 1.2 Connections........................................................................................................................ 4 1.3 Wiring Diagram................................................................................................................... 5 1.4 Mounting Precautions......................................................................................................... 5 1.5 Installing the Media Player if no stereo is already installed................................................ 6 1.6 Installing the Media Player if an existing factory stereo is already installed...................... 6 1.7 Connecting Rear Speakers................................................................................................. 7 1.8 Handle Bar Controls............................................................................................................ 7 1.9 Power On............................................................................................................................ 2 Location of Controls................................................................................................................. 8 8 2.1 Media Player Controls.......................................................................................................... 3 Listening to Devices.................................................................................................................. 9 9 3.1 Listening via Bluetooth....................................................................................................... 9 3.1.1 Pair with Bluetooth Device........................................................................................... 9 3.1.2 Listening via Bluetooth Device..................................................................................... 9 3.2 Listening via Auxiliary Input (3.5mm Jack)......................................................................... 9 3.3 Adjusting Volume Level....................................................................................................... 9 3.4 Device Charging.................................................................................................................. 4 Listening to FM/AM Radio......................................................................................................... 10 10 4.1 Enter FM/AM Radio Mode.................................................................................................... 10 4.2 Scan or Seek FM/AM Radio Channels................................................................................... 10 4.3 Saving Radio Channel to Memory....................................................................................... 10 4.4 Listening to Saved Radio Memory....................................................................................... 10 4.5 Switching between U.S. and European FM/AM Modes.......................................................... 5 Settings Menu........................................................................................................................... 11 11 5.1 Audio Menu......................................................................................................................... 11 5.2 AS/PS (Auto Scan/Preset Scan)........................................................................................... 11 5.3 Clock Settings..................................................................................................................... 11 5.4 Local/Distant Tuning........................................................................................................... 11 5.5 Stereo/Mono........................................................................................................................ 11 5.6 FM Tuning Area................................................................................................................... 12 5.7 Beep Tone........................................................................................................................... 12 5.8 System Reset...................................................................................................................... 6 Specications & Dimensions.................................................................................................... 13 13 4.1 Specications..................................................................................................................... 13 4.2 Dimensions........................................................................................................................ 7 Warranty Information............................................................................................................... 14 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,and

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC warning

- English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC/ IC Radiation Exposure Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

- French:

Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

FCC/ IC Dclaration d 'exposition aux rayonnements Cet appareil est conforme FCC et IC lexposition aux rayonnements limites xes pour un environnement non contrl. Cet appareil doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas tre co-situ ou oprant en liaison avec toute autre antenne ou transmetteur. 2 www.aquaticav.com/harley www.aquaticav.com/harley 15 Warranty Information Media Player AQ-MP-5BT-H Getting Started Media Player AQ-MP-5BT-H Aquatic AV offers a limited warranty of our products on the following terms:

Length of warranty 2 years on audio systems, electronics, speakers, and accessories (receipt required). Coverage This warranty covers only the original purchaser of an Aquatic AV product purchased from an authorized Aquatic AV dealer. In order to receive service, the purchaser must provide Aquatic AV with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase. Defective products Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Aquatic AVs discretion. What is not covered Damage caused by accident, abuse, improper operations or theft. Any cost or expense related to the removal or reinstallation of product. Service performed by anyone other than an authorized Aquatic AV service center. Any product with the serial number or tamper labels defaced, altered, or removed. Subsequent damage to other components. Any product not purchased from an authorized Aquatic AV dealer. Limit on implied warranties Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV. You are responsible for shipping charges of returned products to Aquatic AV. Please record the model and serial number[s] of your equipment in the space provided below as your permanent record and will assist us with your factory warranty coverage. These numbers can be found on the rear of the unit. Model number[s]:

Serial number[s]:

1.1 Contents AQ-MP-5BT-H Digital Media Player Four-pin Speaker Wiring Harness Owners Manual 1.2 Connections (see also 1.3 Wiring Diagram) 1. 23-pin Harley-Davidson Standard Harness Connection The 23-pin harness supplies power and ground connections to the Media Player and two speaker channel output connections from the Media Player. 2. FM/AM Radio Antenna Jack Allows connection of FM/AM radio antenna. For best FM/AM performance make sure the antenna is extended to the highest achievable position. 3. Auxiliary Outputs Allows external amplifiers to be connected to power additional speakers. 4. Auxiliary Inputs Allows an additional RCA input, from a standalone unit or another stereo source. 5. 8-pin DIN Cable Allows connection of the wired Remote Control (AQ-WR-5F sold separately) RF receiver. 6. Bluetooth Antenna Allows a Bluetooth device to wirelessly connect to the unit. 7. USB Charging Input Allows USB devices to be charged when connected. 14 www.aquaticav.com/harley www.aquaticav.com/harley 3 Getting Started 1.3 Wiring Diagram Media Player AQ-MP-5BT-H Specications & Dimensions Media Player AQ-MP-5BT-H 1 3 6 No lower than a 2 Ohm load should be used or damage may occur to the Media Player. Make sure the polarity of speakers are connected correctly. 5 Bluetooth/MP3/FM/AM 87.5MHz 107.9MHz(USA)/87.5MHz - 108MHz(E UR) 526.5KHz 1606.5 KHz 1x 3.5mm stereo Jack socket, 1x stereo pair RCA 6.1 Specications Media Supported media.................................... FM Frequency Range.............................. AM Frequency Range.............................. Bluetooth Operation Frequency range.......2402 2480MHz Bluetooth Output Power(MAX)10dBm Supported media max. dimensions........... Device charging...................................... Inputs Auxiliary................................................ Outputs Pre-Out.................................................. Power Output voltage @ 2 Ohm......................... Output voltage @ 4 Ohm......................... Operation voltage.................................... Max current draw.................................... Standby current draw.............................. 4x 72W 4x 45W 9.6V - 14.4V DC 7A 6mA 107 x 184mm (WxH) via USB 1x stereo pair RCA (2V) Multi-Environment Certications Waterproof / Dustproof............................ Conformal PCB coating........................... UV protection......................................... Salt/Fog protection................................. Stainless Steel mountings....................... 6.2 Dimensions Yes - IP55 Yes 500 hours stable, ASTM D4329 compliant 500 hours stable, ASTM B117 compliant Yes 4 2 214.4mm 210.8mm m m m m 8 8 9 9 6 6

. m m 6 6 3

. m m 8 8 4

. m m 6 8 8 1

. 104.9mm 104.9mm 178mm 52.2mm 4 www.aquaticav.com/harley www.aquaticav.com/harley 13 Beep tone plays when any button is pressed, it can be toggled on and off from this selection. Please observe the following precautions:

1.4. Mounting Precautions Media Player AQ-MP-5BT-H Getting Started Media Player AQ-MP-5BT-H Settings Operation 5.7 Beep Tone 5.8 System Reset Restores all factory settings. 1. Install the unit where it does not interfere with driving. 2. Check clearances on both sides of a planned installation before drilling any holes or installing any screws. 3. When routing RCA cables, keep them away from power cables and speaker wires. A common source of noise in the audio system is the motorcycle ignition system. This is usually due to the radio being located close to the ignition system (engine). This type of noise is detect-

able by a varying pitch with the speed of the engine. Ignition noise can be removed using a high voltage radio suppression type ignition wire and a suppressor resistor. Your motorcycle may already use this wire and resistor but it may be neces-

sary to check them to ensure they are operating correctly. Alternatively, a noise suppressor could be installed. 1.5 Installing the Media Player if no stereo is already installed Use the existing Harley-Davidson factory side mounting brackets and hardware to mount the Media Player. 1. Position the Media Player in front of the fairing opening so the wiring can be passed through the opening. 2. Follow the wiring diagram and ensure all connections are secure and insulated with crimp connectors to ensure proper operation. 3. Turn the Media Player on to confirm operation (motor-

cycle ignition switch must be on) and once correct operation is achieved turn the motorcycle ignition switch off before proceeding with the final mounting of the chassis. 4. Ensure that the unit is supported and secured on the sides using the existing 4 factory screws; failure to do so may allow the unit to move during while riding, causing damage to the mounting area. 12 www.aquaticav.com/harley www.aquaticav.com/harley 5 Getting Started Media Player AQ-MP-5BT-H Settings Operation Media Player AQ-MP-5BT-H 1.6 Installing the Media Player if an existing factory stereo is already installed 5.1 Audio Menu If replacing an existing Harley-Davidson factory stereo use the existing Harley-Davidson factory side mounting brackets and hardware to mount the Media Player. 1. Unplug the 23-pin harness and FM/AM radio antenna from the factory stereo. 2. Remove the factory stereo and replace with the AQ-MP-5BT-H Media Player using the existing factory mounting hardware. 3. Plug the 23-pin harness and FM/AM radio antenna into the AQ-MP-5BT-H factory stereo. 4. Turn the Media Player on to confirm operation (motorcycle ignition switch must be on) and once correct operation is achieved turn the motorcycle ignition switch off before proceeding with the final mounting of the chassis. 4. Ensure that the unit is supported and secured on the sides using the existing 4 factory screws; failure to do so may allow the unit to move during while riding, causing damage to the mounting area. 1.7 Connecting Rear Speakers Rear speakers are usually installed on the following Harley-Davidson Motorcycle models: Electra Glide Ultra Classic, Road Glide Ultra, Ultra Limited. To continue using these speakers with your Aquatic AV Media Player follow the instructions below. 1. Locate the Aquatic AV 4-pin pigtail connector (4-pin molex connector with four speaker wires). The pigtail itself is labelled with Color Code, Function and Description. 2. Locate the stock 35-pin wiring harness that was connected to your OEM radio. This connector will not be connected to your Aquatic AV head unit. Cut the four matching colored wires from the back of the 35 pin harness 3 down from the connector. 3. Strip the 4-pin pigtail wires 1/4 exposing bare wires. Strip the 4 wires that you cut from the 35-pin harness 1/4 exposing bare wires. 4. Connect and crimp using crimp caps or solder the connection, cover the soldered wires with non conductive heat shrink tube. From the Audio Menu you are able to change the bass, treble, balance, and fader. 1. To enter the Audio Menu press the AUDIO/MENU button. 2. In the Audio Menu press the AUDIO/MENU button to scroll through all options. 3. To change the parameters use the rotary knob to adjust settings. Any changes made in the Audio Menu are system wide so it will affect all modes. 5.2. AS/PS (Auto Scan/Preset Scan) Scans through the current frequency band, and assigns presets to the radio stations that have the strongest signal strength. Only does this for one AM/FM band at a time. 5.3. Clock Settings From the clock settings menu you are able to adjust the time and switch the clock on or off. 1. To change the time press MENU then use the rotary knob to navigate to SYSTEM settings then CLOCK SETTINGS. Use the rotary knob to adjust and set the time. 2. To switch the clock on or off press MENU then use the rotary knob to navigate to SYSTEM settings then CLOCK PRIORITY. Use the rotary knob to select either ON or OFF. 5.4 Local/Distant Tuning When Local is turned on the Media Player seeks to only the radio channels with strong signal strength. When Local is turned off the Media Player will seek to all radio channels it receives signal from. When local is turned on the word Local will appear in the upper right hand corner of the Media Player LCD. 5.5 Stereo/Mono Change the output mode between stereo and mono. Some applications only accept a mono input. The FM tuning can be set to different areas, using the rotary knob to scroll through to select the desired tuning area. There are seven different tuning areas: USA, EUR, LAT, ASIA, MIDDLE EAST, AUSTRALIA, RUSSIA. After following the installation instructions above test your rear speakers for sound. If you do not have output from your rear speakers make sure to check your rear speaker setting in the settings menu and select rear speakers ON. 5.6 FM Tuning Area 6 www.aquaticav.com/harley www.aquaticav.com/harley 11 Listening to FM/AM Radio Media Player AQ-MP-5BT-H Getting Started Media Player AQ-MP-5BT-H 4.1 Enter FM/AM Radio Mode 1.8 Handle Bar Controls 1. Press MODE on the unit keypad to switch to FM/AM radio mode. Audio switch (left hand side) Mode switch (right hand side) 4.2 Scan or Navigate FM/AM Radio Channels 1. Press FAST REWIND/FAST FORWARD to seek another station. 2. Press and hold either FAST REWIND/FAST FORWARD for manual tuning back or forward. 4.3 Saving Radio Channel to Memory 1. Tune to the station you would like to be saved as a preset. 2. Press and hold the Preset Button. 3. The stereo will enter the add preset button menu. 4. Using the rotary knob you can choose which preset slot you would like to save the current station to. 5. Upon successfully saving a preset, the preset number that was chosen will be shown in the right corner. Presets are only for the current band you are on. Each band FM1, FM2, FM3, AM1 and AM2 has six presets for a total of 30 (18x FM & 12x AM). 4.4 Listening to Saved Radio Memory 1. Once the presets have been set either manually or using AS/PS press the Preset button to scroll through your presets. 4.5 Switching between US and European FM Modes 1. When in RADIO mode. 2. Press and hold the AUDIO/MENU button to enter the System Menu. 3. Press the AUDIO/MENU button to scroll through the options. 4. Scroll to AREA then; turn the rotary knob to select your desired tuning area. 5. Once the desired tuning area has been selected you can press esc to return to FM Mode. US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz. The AQ-MP-5BT-H is a plug and play solution for 1998-2013 Harley-Davidson Motorcycles. Plug the standard Harley-Davidson 23-pin connector in to the back of the AQ-MP-5BT-H and your speakers and hand controls will work the same as the standard factory install (some Harley-

Davidson models may require additional steps). Some stock Harley-Davidson features e.g. CB radio will not be supported through the AQ-MP-

5BT-H. Below is a matrix of what can be controlled on the AQ-MP-5BT-H via the stock Harley-Davidson hand controls. Hand Control Up Hand Control Down Tunes to next station Tunes to previous station Next Track Previous Track Mode Select Switches Mode Switches Mode Switches Mode

( - ) Audio Turns volume up Turns volume down Accesses Audio menu adjustments Turns volume up Turns volume down Accesses Audio menu adjustments Turns volume up Turns volume down Accesses Audio menu adjustments AM/FM Bluetooth AUX AM/FM Bluetooth AUX 1.9 Power On The AQ-MP-5BT-H requires +12V DC to both the red and yellow wires. When both of these wires have power the AQ-MP-5BT-H is powered on. Ground is connected to the black wire. Once all connections are made press the rotary knob and the stereo will turn ON. 10 www.aquaticav.com/harley www.aquaticav.com/harley 7 Location of Controls 2.1 Media Player Controls 1 2 3 4 12 3 5 6 Media Player AQ-MP-5BT-H Listening to Devices Media Player AQ-MP-5BT-H 3.1 Listening via Bluetooth 3.1.1 Pair with Bluetooth Device 1. Switch on your Bluetooth device. 2. Select AQUATIC AV from the list of available devices to pair (no password is needed). 3. A Bluetooth logo will illumiate on the Media Player LCD to verify Bluetooth is activated. Only one Bluetooth device can be paired with the Media Player at any time. 3.1.2 Listening via Bluetooth Device 1. Bluetooth mode will be activated once a Bluetooth device is linked. 2. Play the song from device and the sound will play through the Media Player. 3. Press PLAY/PAUSE to play/pause the song. 4. Press FAST REWIND/FORWARD buttons to play previous/next song file. 5. Previous/next track and volume up/down can be controlled directly from your Bluetooth device or directly from the Media Player controls. 3.2 Listening via Auxiliary Input (3.5mm Jack) 1. Remove the faceplate from the stereo. 2. Connect your MP3 device to the 3.5mm connector. 3. Re-attach the faceplate. 4. Press the rotary knob to power the Media Player ON (if the faceplate was removed with the stereo still powered on, it will power on by itself). 5. Press (MODE) on the Media Player or remote control to select AUX IN-1 mode. Always ensure to connect and disconnect your Media Player with dry hands!

11 10 9 8 7 1. Front face release 2. Preset station 3. Fast Rewind/Forward 4. Mode button 5. Band button 6. LCD screen 7. Audio/System menu 8. XBS function 9. Play/Pause 10. ESC/Info 11. DSP/Dimmer 12. Rotary Select Knob Aux In Bluetooth Button Rotary Select Knob Mode Rotary Knob Clockwise Rotary Knob Counter Clockwise Fast Forward Fast Rewind Play/Pause Band XBS DSP/Dimmer ESC/Info Preset Audio/Menu FM Mode Short Press: Mute Long Press: Power Off In menu: Select Short Press: Switches through different modes Long Press: No Function When turned clockwise the volume increases When turned counter clockwise the volume decreases Short Press: Scans to the next station Long Press: Switches into manual seek mode Short Press: Scans to the previous station Long Press: Switches into manual seek mode Short Press: Toggles between Play and Pause Long Press: No Function Short Press: Switches between AM/FM Bands Long Press: No Function Short Press: Toggles on/off crossover bass Long Press: No Function Short Press: Turns on EQ Preset Long Press: Enables the two stage dimmer Short Press: Returns you to the Default Screen Long Press: Displays info if any available Short Press: Advances through presets Long Press: Set up new presets Short Press: Takes you into the audio menu Long Press: Takes you into the system menu No Function No Function No Function No Function Changes to next song No Function Changes to Previous Song No Function No Function No Function No Function No Function 3.3 Adjust Volume Level 1. Turn the rotary knob clockwise increase the volume. 2. Turn the rotary knob counter clockwise to reduce the volume. 3.4 Device Charging 1. Remove the faceplate from the stereo. No Function No Function No Function No Function No Function No Function 2. Place your device on the internal shelf and connect your USB device to the USB connec-

tor. 3. Re-attach the faceplate and ensure the stereo is switched on. The device battery will then charge. If your music player is connected via the Auxiliary input you will not be able to control track or receive track informa-

tion. The USB connector will provide charging only. Audio content stored on your device will not be recognized or playable by the stereo. Turn off DSP to access control of Bass and Treble 8 www.aquaticav.com/harley www.aquaticav.com/harley 9

\@ nano pan contro.

{Q FRONT RIGHT SPEAKER (-) i cr auack Pavone sno 6an conTHOL fawne

@ wo wa contmon eon

@ nwo oan conmo. vous

@ nwo oan conmo. eon

@ wwossnconma, prem wary

@ ome coouwee

\@ crow sree

@ nccessom 12v emoctun

@ MRONTLEFTSPENER (+) rromnee

\___@ ROT LEFT SPEAKER) at cre enim

@ FRONT RIGHT SPEAKER (+) rer. ename eajorance

@ nwo sai como ee cweoiaue oes AQUATICAV i - | AQ-MP-5BT-H mmc, | ncaa OS, ware = FM 87.5-108 MHz AM 526.5-16065 KHz

(4!/ POWER SUPPLY: 12V DC NEGATIVE GROUND SPEAKER IMPEDANCE: 4 - 8 OHMS INTERFERENCE ABSORPTION CIRCUIT Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA

(+) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC. RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE

| HARMFUL INTERFERENCE. AND (2) THIS DEVICE

(MUST ACCEPT ANY INTERFERENCE RECEIVED. INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID: WBQ-SM78N_

:20987-SM78N US PATENT NO. C (si) Fe 7,831,756 & 8,578,081 ll MADE IN CHINA 12345878 oO C2 rc

-o 04 C2 we

AQUATIC AV DATE : 2022.7.20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WBQ-SM78N Product Name: WATERPRROF MEDIA PLAYER Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

Name: Robert L. Fils Title: Engineer Company: AQUATIC AV

AQUATIC AV DATE : 2022.7.20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, | appoint EST Technology Co., Ltd. Address: Chilingxiang, Qishantou, Santun Houjie, Dongguan, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission's regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with AQUATIC AV_Address: 282 Kinney Drive, San Jose, CA United States (Applicant Name and address)

<Signature>

WZ WA . Name: Robert L. Fils Title: Engineer Company: AQUATIC AV

AQUATIC AV I, the signer, Robert L. Fils The only differences between the two models are that the model name and tail line. They are electrically identical. Item Name : WATERPRROF MEDIA PLAYER Model Number: AQ-MP-5BT-H Additional Model: AQ-MP-5BT

<Signature>

Name: Robert L. Fils Title: Engineer Company: AQUATIC AV