User Manual Content Components H/W Parts Device Functions Device Settings System Settings Date & Time Wi-Fi Application Application Settings CRM - Full CRM - Simple Hydration Sebum Pore Melanin Acne Wrinkle Hemoglobin Result Send Result -Email Send Result - Mirroring Troubleshooting & FAQ Warranty 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 21 23 24 26 Components Components Main unit with skin lens
(APM PRO) Cradle Skin tone sensor
(ST model only) Charger USB cable Cleaning cloth Manual Sebum paper 2 box Lens cap 2ea Air blower 3 H/W Parts Device Functions APM PRO lens Indicate LED Flash button Volume up & down button Flash X1 Lens On/off button 4 Lens module change button USB slot (DC 5V 3A) B. H/W Parts 2 1 Device Settings To turn on & off the power 1 2 Press and hold power button. Then Indicate LED will be twinkled and turned on white. Charger can be used for Amercian type & European type. The default is European type. 1 Push the plug up. 2 Then 220V European type is disassembled and you can see the 110V-220V American type inside of the charger. 3 Choose the one you want to use and connect USB cable in adaptor. 5 System Settings Date & Time 1 2 3 Press button. Touch button. Touch Date & time. 4 5 2 6 Touch Set date. Change the date and touch OK button. Please check the setting is correctly applied. 6 Wi-Fi System Settings 1 2 3 Touch button. Touch Wi-Fi. Turn on toggle switch. 4 5 6 Wi-Fi list will be appeared. Among the lists, select the Wi-Fi connection you could use. Wait until the device is connected to with Wi-Fi. 7 Application Application Settings 1 2 1Press button. 2 Touch "SETTINGS". 2 2 3 Language, version, email setting is available. 8 CRM - Full Application 1 2 3 1 Touch "START DIAGNOSIS". Touch "FULL DIAGNOSIS". 3 If you are new customer, touch NEW CUSTOMER. 4 5 6 Input the information as below.
- Full Name, phone number, email address.
- Gender and age group. After registering all information, touch SAVE button. Check the diagnosis menu and touch "OK". 9 Application CRM - Simple 1 2 1 Touch SIMPLE DIAGNOSIS button. 2 Select the GENDER and AGE group. 3 START DIAGNOSIS 10 Application Hydration 1 2 1 Touch the SCAN button. After beep sound, place the sensor on the skin. And hold it for 3~4 seconds until vibration and sound. Check the result. 2 11 Application Sebum 1 2 Put the sebum paper(pink area) onto the U-zone of your face for seconds. Touch to activate camera. 4 5 3 6 Touch to take picture the pink area only. Touch to activate camera. Put the sebum paper (pink area) onto the T-zone of your face for seconds. Touch to take picture the pink area only. 12 Application Sebum 6 7 Touch SCAN to measure. 8 Touch the SKIN TYPE button. 8 Check the result. 13 Application Pore 1 2 Touch to activate camera. Place the lens onto your skin and touch button. 3 4 Touch SCAN to analyze. Check the result. 14 Application Melanin 1 2 Touch to activate camera. Place the lens onto your skin and touch button. 3 4 Touch SCAN to analyze. Check the result. 15 Application Acne 1 2 Touch to activate camera. Place the lens onto your skin and touch button. 3 4 Touch SCAN to analyze. Check the result. 16 Wrinkle Application 1 2 3 Touch to activate camera. Place the lens onto your skin and touch button. Move the white box and touch SAVE button. 4 5 Touch SCAN to analyze. Check the result. 17 Application Hemoglobin 1 2 Touch to activate camera. Place the lens onto your skin and touch button. 3 4 Touch SCAN to analyze. Check the result. 18 Application Result 1 2 Touch ELASTICITY or HYDRATION. Touch Diagnosis. 3 4 Available to check the diagnosis result. Product recommendation. 19 Application Result 1 2 Touch Pore or Melanin or etc you want to check . means the worst status in your diagnosis result. 3 4 5
- Main concern. Touch each parameter you want to check skin image & product Available to check the diagnosis result. Available to check product image. 20 Send Result - Email 1 In SETTINGS page, touch 7.Email setting. 3 Application 2 4 Touch Mail account Select the mail account to register on the list. After select the mail account, please Input the ID only and password. Then touch OK. 21 Application Send Result - Email 1 2 3 Press button. Touch button. Touch Wireless & networks 4 5 6 Check the square box. In Send result page, touch Email. Receivers email address will be appeared with your CRM information. Otherwise, input the email address. 22 Send Result - Mirroring Application 1 2 3 Press button. Touch "SETTINGS". It is able to connect to Android Viewer
& iOS Viewer system when AP success is shown up on the screen. 4 5 6 With your mobile device, capture QR code. Then program will be installed. In your mobile device go to Wi-Fi setting. Then find "ARAMHUVIS"
code and connect it. Mirroring system is started. 23 Troubleshooting & FAQ I cannot turn on the device. Connect and charge the device (or the battery) using the adaptor provided the supplier.
(The battery charging indicator will be shown on the system main page.) I cannot power on the device even the battery is still full. The battery might be dislocated on the device. Please separate the battery from the device and put it on, and then power on again. The battery is not charging very well. Separate the battery from the device and put it on again. Check the connection among a device, a battery and a charger. A battery cannot be charged if there is an alien substance on the charging port. In this case, please use the device aer cleaning the charging port of the device or check whether the sticker is attached on charging port. The using time of the battery is dierent from the manual. The battery using time will be shorten if you put the charged battery in a low or high temperature. The battery using time varies in service type, using environment, using period of the battery. The battery is consumed without using the device, and the battery using time will be shorten if you use additional functions of the device. The device turns on but the diagnosis doesnt work. Check the smart card is correctly inserted (SD card slot on the button of the device.) There are dust on the device. Clean the dust by using a smooth fabric. Do not use bemzene, alcohol, and a synthetic detergent. The screen is frozen and the keys not working when using the device. Separate the battery from the device and put it on again. If the device is still not working please contact to the customer servise center. A force close message appears on the screen. The repetition of commands can trigger a bug. Sometimes there may be a brief delay before the command is completed. Do not repeat/multiply the tasks as the device will no longer be able to follow them. I cannot connect to Wi-Fi. Check the connection status on setting page. Try to connect to another Wi-Fi. Bluetooth : check the pairing status and try to re-pair the device with host device. 1 2 3 4 5 6 7 8 9 24 Troubleshooting & FAQ 10 11 The touchscreen doesnt react to my finger commands. Before using for the first time remove the protective plastic film. I cannot connect to Blue-tooth. Make sure to use the Bluetooth hosting devices that have Bluetooth certified with the logo. You may need an external Bluetooth dongle for those devices that do not have Bluetooth feature. bring the device to closer with the Bluetooth hosting device. Try to re-pair the device with host device. The password of pairing is 0(number).
* Blue-tooth function is not allowed to use in IOS device without APPLES oicial permission. 12 The screen was turned o. Press the on/o button to turn on the screen. The device has a power save function that turn the screen o aer 1minute. For the setting, please refer to Page 8. 13 14 15 I can see the black screen only during measurement. Check the LED light inside lens on the head part when you try to measurement. If you cannot see the light, please contact the customer service via email or phone call. The image is not clear. Tap the screen while capturing focus. I cannot update the diagnsis application. Check the network connection. The update process can be done aer connecting to Wi-Fi. 25 Warranty 1 2 3 4 5 6 7 The product undergoes strict quality management and inspection process before production and introduction to market. In case of functional or operational defect occurs under normal condition of use within 10 days aer purchase, we will repair it for free or replace in new product. When this product goes out under the normal use, we will repair it free of charge under warranty. Please keep the warranty card when you ask for repair service. Customer needs to pay repair charge aer warranty runs out. For this product, warranty period is 14 months from the Invoice date. Cost Within warranty : Sending delivery(Buyer), repair cost and returning delivery(Aram)
- If the product is broken by user's fault, repair cost could be charged. Aer warranty : Sending delivery and repair cost(Buyer), returning delivery(Aram) 8 How to send :
- As sending a present from person to person by EMS or FEDEX.
(Do not write the company name)
- Total value should be under US $ 99.(Write non-commercial value) 26 Warranty Date of purchase Contact person Address :
Tel :
Service request form
/ /
Company Product name, serial No :
Problems :
PRODUCTION DIVISION & FACTORY (SHIPPING ADDRESS) :
#909 Byucksan Technopia, 560, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13230 Rep. Korea Tel: 070-4687-1712 / Fax: 031-732-6330 / Email: support@aramhuvis.com http://www.aramhuvis.com 27 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. If the device is going to be operated in the 5.15 - 5.25 frequency range, then it is restricted to indoor environment only. This device meets all other requirements specified in Part 15E, Section 15.407 of the FCC Rules. HEAD OFFICE Jung-Ja Dong-Rm401-402, Seoul National University Hospitals Health Care Innovation Park, 172, Dolma-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13605 Rep. Korea PRODUCTION DIVISION & FACTORY
#909 Byucksan Technopia, 560, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13230 Rep. Korea Tel: 070-4687-1712 / Fax: 031-732-6330 / Email: info@aramhuvis.com http://www.aramhuvis.com