A r a m o P r o f e s s i o n a l S c a n n e r I I APSII Users Manual Aramo Professional Scanner SKIN DIAGNOSIS SYSEM FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operation in conjunction with any other antenna or transmitter. This equipment complies with FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. A A r a r m a m o o S m P a r r o t f N e a s v s i i g o a t n o r a I l I 1 S 0 c 0 a n n e r I I Content 1. How to use 2. How to operate System setting Wireless & network setting 3. How to diagnosis Full mode View mode 4. How to set 5. Additional information Standard & Features Troubleshooting Guide & FAQ CAUTION UPON INSTALL & USE Use the touch screen H o w t o u s e The touch screen lets you select items or perform function. Learn basic actions to use touch screen. Tap : Touch once with your finger to select or launch the menu option, or application Drag : Tap and drag your finger up, down, left, or right to move to items on lists. Tap and hold : Tap an item and hold it for more than 2 seconds to open pop-up option list Double-tap : Tap twice quickly with your finger to zoom in or out while viewing photos. Enter text Enter text by selecting characters on the virtual keypads No. Function Shortcuts for frequent use Capitals lock key Switch between ABC and Number(symbol) mode Space Delete Start new line H o w t o u s e Icons to operate in Manual Icons To do Touch to take images from the device Go to capturing page OK OK Cancel Go back to previous page USE Use the image taken for diagnosis Analysis Analyze the image 3D 3D Image Go back to previous page on skin image Mode Change the lighting mode Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. Turn on / off & System main page
* Tap in red box
- On/Off button: Press and hold for 3 seconds
- Sleep mode on / off : Press the button H o w t o o p e r a t e _ T u r n o n
o f f Turning on Turning off Go to setup page Go back to system main page Icons To do Icons To do Diagnosis application Alarm Gallery (album) MP3 System setting Add alarm Internet How to set the system
* Tap in red box H o w t o o p e r a t e _ S y s t e m s e t t i n g Application setting Brightness setting Check the mark. The setting have to be a ctivated to download ap plication. Adjust the Brightness to display the application more effectively. H o w t o o p e r a t e _ S y s t e m s e t t i n g How to set the system
* Tap in red box Language setting Keyboard language Deactivate Select the language you want to use Changed the keyboard language H o w t o o p e r a t e _ S y s t e m s e t t i n g How to set the system Language setting How to change the keyboard language
* Tap in red box Press and hold the space-bar to show the language selection Drag left or right to choose the language How to change the System language Select the language you want to use H o w t o o p e r a t e _ S y s t e m s e t t i n g How to set the system
* Tap in red box Date & Time setting How to set date How to set time zone & time Enter the current date Select users time zone or city name Enter the current time H o w t o o p e r a t e _ S y s t e m s e t t i n g How to set the system Wi-Fi connection
* Tap in red box Tap setup. On System main page Check the Wi-Fi mark Find and connect the available Wi-Fi H o w t o o p e r a t e _ S y s t e m s e t t i n g How to set the system Bluetooth Pairing
* Tap in red box How to pair the diagnosis system with the host device Note
* Host device : all kinds of PC including tablet PC you want to send the diagnosed result or the related images. Check the name of host device Activate the Bluetooth function on host device for the diagnosis system to search and pair with host device. Example image On host device Accept the paring request sent from diagnosis system. Password: 0 (number) Check the Bluetooth mark Check the pairing status Scan for host device Select the host device How to set the system Bluetooth Pairing How to change the name of diagnosis system
* Tap in red box H o w t o o p e r a t e _ S y s t e m s e t t i n g Enter the device name what you want Diagnosis Process How to setup
* Tap in red box H o w t o o p e r a t e _ s e t t i n g Tap setup. Language Option DragDrag Select the language Measurement
* Show measurement page before starting diagnosis.
- Green: activate status
- Gray: deactivate status Green : activate Analyze
* Show the diagnosed result by number on the capture page. Gray : deactivate Do not analyze Select what you want to diagnose Diagnosis Process How to setup
* Tap in red box H o w t o o p e r a t e _ s e t t i n g Tap setup. Language Option DragDrag Select the language Measurement
* Show measurement page before starting diagnosis.
- Green: activate status
- Gray: deactivate status Green : activate Analyze
* Show the diagnosed result by number on the capture page. Gray : deactivate Do not analyze Select what you want to diagnose Diagnosis Process How to setup
* Tap in red box Advance Network H o w t o o p e r a t e _ s e t t i n g Selected status Unselected status Check the version of application Email Set Wireless connection; Wi-Fi or Bluetooth Enter the ID (ex. abcd1234) Enter the Domain (ex. @gmail.com) Enter the Password (ex. aaaa1234) Register the senders email account Diagnosis Process Full mode
* Tap in red box Start diagnosis H o w t o d i a g n o s e _ F u l l m o d e Note
* Gray : deactivate status
* Black : activate status Enter age group and gender of customer Hydration & Elasticity Place the sensor onto your skin and tap Note * Do NOT move during the measurement.
* Please, rescan : To measure again by taping Diagnosis Process Full mode
* Tap in red box Sebum ( T & U zone) Put the below sebum tape (pink area) onto the U or T-zone of your face for 3 seconds. How to hold the sebum paper T - ZONE H o w t o d i a g n o s e _ F u l l m o d e U - ZONE How to put the sebum paper on T-zone How to put the sebum paper on U-zone Diagnosis Process Full mode
* Tap in red box Sebum ( T & U zone) H o w t o d i a g n o s e _ F u l l m o d e Tap Analysis Tap each image to magnify Tap to go back to Sebum-U/T page. Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus.
* Take the image without any white blank. O X Diagnosis Process Full mode
* Tap in red box Pore H o w t o d i a g n o s e _ F u l l m o d e Tap. Analysis DragDrag Tap 3D 3D image Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. Diagnosis Process Full mode
* Tap in red box Melanin H o w t o d i a g n o s e _ F u l l m o d e Sensitivity Tap. Analysis Wrinkle Tap. Analysis Choose the area by moving the white box Tap. Analysis Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. Diagnosis Process Full mode
* Tap in red box Wrinkle H o w t o d i a g n o s e _ F u l l m o d e Tap 3D Acne 3D image Tap Analysis Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. Diagnosis Process Full mode
* Tap in red box Analysis result H o w t o d i a g n o s e _ F u l l m o d e Note
* Product recommendation : to be updated H o w t o d i a g n o s e _ F u l l m o d e Diagnosis Process Full mode
* Tap in red box Send Enter the customers email address. Turn to USB storage Recognized as a Removabl e disk on PC Note
* Bluetooth : to be updated H o w t o d i a g n o s e _ V e w m o d e i Diagnosis Process View mode
* Tap in red box NL mode (for Wrinkle) Mode Tap to change the lighting mode. Choose the area by moving the white box Turn to USB storage PL mode (for Melanin) Tap to change the lighting mode. Mode 3D image Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. Diagnosis Process View mode
* Tap in red box UV mode (for Acne) Tap to change the lighting mode. Mode UV UV UV Note
* Touch the > or fling the screen to go to next page.
* Tap the screen to focus. H o w t o d i a g n o s e _ V e w m o d e i How to update the application
* Tap in red box Note
* Check the Wi-Fi connection before updating H o w t o s e t t h e A P S I I Drag down How to remove the application
* Tap in red box H o w t o s e t t h e A P S I I On System main page Find Smartnavi application. How to re-install the application after removing
* Tap in red box H o w t o s e t t h e A P S I I Drag down On System main page Enter the address below and download the application www.aramhuvis.com/data/asn2/smartnavi.apk Standard & Features Section Item Optical/Camera Camera Sensor A d d i t i o n a l i n f o r m a t i o n HW SW Contents 5MpixelCMOS X30,X60TPL VCM Hydration Normal,Polarize,UV[3CH]
S5PV210ARMCORTEXA8[1GHz]
DDR2SDRAM(512MB)/NANDFLASH(512MB) TFlash(MicroSD) 2.2InchTFTLCDQVGA(240*320) RTOUCH Wireless802.11b/g/n(WiFiDirectAvail) BTver3.0+HS AC97,Codec(WM1800) Max 1.0 W, InternalSpeaker USB 2.0 HOST/DEVICE Liion(1150mAh) ACAdaptorDC5V/2000mA Power , 4-direction navi Key ,Left , Right InternalMIC Micro SDver2.0(2GB) 127g (withbattery) AF Sensor Light CPU Memory SDMemory LCD Touch WiFi Bluetooth Audio SPEAKER USB Battery Adaptor KeyPad Microphone Storage Weight Dimension(mm) 57(W) x116(H)x18(D) Bootloader OS Media Applications DebuggingPort USBClient/UART uboot1.3.2 AndroidGingerbread2.3 MPEG4(SP/ASP)/H.263(Profile3)/H.264(BP/MP/HP) Googleapp. A d d i t i o n a l i n f o r m a t i o n Troubleshooting Guide & FAQ I cannot turn on the device. Connect and charge the device (or the battery) using the adaptor provided the supplier.
(The battery charging indicator will be shown on the system main page.) I cannot power on the device even the battery is still full. The battery might be dislocated on the device. Please separate the battery from the de vice and put it on, and then power on again. The battery is not charging very well. Separate the battery from the device and put it on again. Check the connection among a device, a battery, and a charger. A battery cannot be charged if there is an alien substance on the charging port. In this case, please use the device after cleaning the charging port of the device or check whe ther the sticker is attached on charging port. The using time of the battery is different from the manual. The battery using time will be shorten if you put the charged battery in a low or high t emperature. The battery using time vary in service type, using environment, using period of the batt ery. The battery is consumed without using the device, and the battery using time will be s horten if you use additional functions of the device. The device turns on but the diagnosis doesnt work. Check the smart card is correctly inserted (SD card slot on the button of the device). There are dust on the device. Clean the dust by using a smooth fabric. Do not use benzene, alcohol, and a synthetic d etergent. The screen is frozen and the keys not working when using the device. Separate the battery from the device and put it on again. If the device is still not working, please contact to the customer service center. A "force close" message appears on the screen. The repetition of commands can trigger a bug. Sometimes there may be a brief delay before the command is completed. Do not repeat/multiply the tasks as the device will no longer be able to follow them. Troubleshooting & FAQ I cannot connect to Wi-Fi. A d d i t i o n a l i n f o r m a t i o n Check the connection status on setting page. Try to connect to another Wi-Fi.
- Bluetooth : Check the pairing status and try to re-pair the device with host device. I cannot connect to Blue-tooth. Make sure to use the Bluetooth hosting devices that have Bluetooth certified with the logo. You may need an external Bluetooth dongle for those devices that do not have Bluetooth feature. Bring the device to closer with the Bluetooth hosting device. Try to re-pair the device with host device. The password of pairing is 0(number). The touchscreen doesnt react to my finger commands. Before using for the first time remove the protective plastic film. Use the stylus-pen provided from supplier. The screen was turned off. The device has a power save function that turns the screen OFF after 1 minute. Press the on/off button to turn on the screen. I can see the black screen only during measurement. Check the LED light inside lens on the head part when you try to measurement. If you cannot see the light, please connect the customer service center. The image is not clear. Tap the screen while capturing to focus. I cannot update the diagnosis application. Check the network connection, the update process can be done after connect to Wi-Fi. A d d i t i o n a l i n f o r m a t i o n CAUTION UPON INSTALL & USE Thanks for using the product of Aram HUVIS Co., Ltd.. The product undergoes strict quality management and inspection process before production and introduction to market. Product defect or trouble during warranty period is entitled to free repair. Model Date of Purchase Place of Purchase Serial No. Customer Name Contact Information Please, fill out warranty and keep it with receipt to enjoy better service in the future. Warranty Period 14 MONTHS from the products arrival. Service Free of Charge Service is provided free of charge only if product defect occurs within 1 year from the date of purchase (within Warranty Period). Case Service Within Warranty Period After Warranty Period Functional or operational defect which occurs under normal condition of use within 10 days after purchase Functional or operational defect which occurs under normal condition of use within 14 year after purchase Product replacement Free of charge Defect which results from the mistreatment by the user Partial free repair Or Repair with charge Repair with charge Repair with Charge
* Cases except for product defect If service is requested due to the reasons except for defect, service fee may be charged.
- Defect resulting from the mistreatment by the user
- Defect resulting from the lack of caution (leakage or shock) or unauthorized repair or remodeling
- Defect due to natural disasters such as fire, earthquake or flood CAUTION UPON INSTALL & USE 1. Humidity Do not install the product in the place with rain leakage or of high humidity. If the product is leaking, it may cause damage or fire. 2. Repair Do not disassemble or remodel the product because it may cause danger such as an electric shock. When a problem occurs, do not attempt to repair it. Instead, contact the seller. 3. Electricity Do not use electricity except for what is prescribed here. Using improper electricity may cause an electric shock or danger. 4. Installation Environment Do not install the product in a too hot or cold place. (Recommended Temperature : 15 ~ 35 ) 5. Sunlight Do not expose the camera of the product to the sun or a direct ray of light. It may cause product damage A d d i t i o n a l i n f o r m a t i o n 6. Shock or Vibration Do not drop the product or give it a strong shock or vibration. 7. If the product does not work properly If a problem occurs while using the product (unidentified noise, smell or smoke), stop using it and turn the power off and contact the seller. 8. Dirt on Lens Make sure that keep camera lenses clean and away from pollution. If it polluted by finger print or external dirt, cleanse it with cotton stick socked with 70% Ethyl Alcohol solution or use air blower to remove the dust. Those products are available at camera shop. 9. For After-Service When any of the following occurs, turn the power off and have the product repaired at the place of purchase. i. ii. iii. iv. Power Connector is damaged The product is leaking Liquid is spilt over the product or it has alien substance. Product does not work as indicated in this manual.
(Attempting to operate the product against manual may cause more serious damage.) v. Product is dropped to the floor and seriously damaged. A A r a r m a m o o S m P a r r o t f N e a s v s i i g o a t n o r a I l I 1 S 0 c 0 a n n e r I I World leader of skin & hair diagnosis system Rm.801 Byucksan Technopia, #434-6 Sangdaewon-dong, Jungwon-gu, Seongnam-city, Gyeonggi-do, KOREA 462-716 TEL [82-31] 732.6320 FAX [82-31] 732.6330 E-MAIL info@aramhuvis.com WEBSITE www.aramhuvis.com