IC ID:25103-MAXL1 FCC ID:2ABGQ-MA-XL1 MA-XL1Lecture Capture StationUsers Manual (concise)Please read through this manual before using this product, in order to use safely and utilize well the product.()LR Lecture Capture Station MA-XL1 Users Manual (concise) Thank you for purchasing this Lecture Capture Station. This is the basic manual on the product. Visit our website to get the detailed manuals
(Safety Guide, Operating Guide) and the latest information on the product. Check them before using the product, for safe use and utilization of the product. Our website: Please see the attached sheet
!
WARNING Before using this product, be sure to read all manuals for the product. After reading them, store them in a safe place for future reference. Heed all the warnings and cautions in the manuals or on the product. Follow all the instructions in the manuals or on the product. 01 ENGLISH Contents
(Page no.) First of all Graphical symbols explanation Important Safety Instructions Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems Note for the battery symbol (bottom symbol) About Electro-Magnetic Interference Package accessories Placement Product connection Connecting the power supply Product setup Connection Basic operations Turning on the power Turning off the power Specifications Manufacturing year and month 02 02 03 03 04 04 05 06 07 08 09 09 11 11 11 12 14 First of all Graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Know their meanings beforehand and heed them. This entry warns of a risk of serious personal injury or even death.
!
Warning / Caution Turns the power on/off
!
!
WARNING CAUTION This entry warns of a risk of personalinjury or physical damage. NOTICE This entry notices of fear of causing trouble. 02 Starts recording Stops recording Switches channel Information Projector power on/off Audio output ENGLISH Important Safety Instructions The followings are important instructions for safely using the product. Be sure to follow them when handling the product. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this product.
!
WARNING Never use the product in or after an abnormality (for example, giving off smoke, smelling strange, finding a foreign object inside, and so on.) If an abnormality should occur, unplug the product urgently. This product is suitable for adults who have the ability to operate this machine. Situate the product away from children and pets. Keep small parts away from children and pets. If swallowed, consult a physician immediately for emergency treatment. Do not use the product during electrical storms. Unplug the product from the power outlet if the product is not being used. Do not open or remove any portion of the product, unless the manuals direct it. For internal maintenance, leave it to your dealer or their service personnel. Use only the accessories specified or recommended by the manufacturer. Do not modify the product or accessories. Do not let any things or any liquids enter to the inside of the product. Do not get the product wet. Do not place the product where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position. Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or the leaned table.
- Ensure the product is stable. Place the product so that it does not protrude from the surface where the product is placed on.
- Place your hands on the grip on the bottom of the product when carrying it.
- Remove all the attachments including the power cord and cables, from the main device when carrying it. Do not approach the exhaust vents, while the product is on. Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead. 03 ENGLISH Note for the battery symbol (bottom symbol) This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. About Electro-Magnetic Interference This is a Class A product. In a domestic environment this device may cause radio interference in which case the user may be required to take adequate measures. This device may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. Hereby, Maxell, Ltd., declares that the radio equipment type Lecture Capture Station is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.maxell.eu/uploads/docs/PJ-DoC.pdf
!
CAUTION the ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.:
no naked flame sources, such as lighted candles, should be placed on the apparatus;
attention should be drawn to the environmental aspects of battery disposal;
the use of apparatus in tropical climates. the instructions for use shall state that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 04 ENGLISH Package Accessories Your product should come with the items shown below. Check that all the items are included. Contact your dealer immediately if any items are missing. Power adaptor Power cord *
Bluetooth Antenna Balance line connector (2 units) DIDO connector USB number keyboard stickers Rack mount bracket (1 pair) + M4 x 6mm screw (8 units) Users manual (concise)**
URL sheet 1 2 3 4 5 6 7 8 9
* The number of power cords varies depending on the region.
** This concise is a basic manual. For details, consult the Operating Guide from our website before using. (1) 1 4 7 2 5 8 3 6 9 http://biz.maxell.com/en/display_equipment/
(ENGLISH) Thank you for purchasing this Lecture Capture Station. Before using this product, be sure to read all manuals for this product. Please check the above web address where you may find the latest information for this product.
( ) 2021MAXL00 QR92741 Printed in Taiwan Lecture Capture Station MA-XL1 Users Manual (concise) Please read through this manual before using this product, in order to use safely and utilize well the product.
( ) R L
!
WARNING Keep small parts away from children and pets. Take care not to put in the mouth. If swallowed, consult a physician immediately for emergency treatment. Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the product. NOTICE 05 ENGLISH Placement Please set this product to level. This product can be mounted into a rack (for 19-inch rack) with the provided rack mount bracket. When attaching the rack mount bracket to the main unit, be sure to use the provided screws. For details, consult the Operating Guide. (1) Please follow the manual of the rack to mount. Please take a distance of more than 2 cm between the product and the wall. 2 cm or greater 2 cm or greater
!
WARNING Install the product where you can access the power outlet easily. Do not install the product near thermally conductive or flammable things. Do not place the product in a place where it may get wet. Do not place the product where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position. Install the product in a stable horizontal position.
- Do not put the product on its side, front or rear position
- Do not attach nor place anything on the product unless otherwise specified in the manual. Do not block the intake vents and exhaust vents of the product. If the intake vents and exhaust vents of the product are blocked, the accumulated inside heat may cause fire. When attaching the rack mount to the main unit, be sure to use the provided screws. Using other screws may cause failure, fire, or electric shock.
!
CAUTION Place the product in a cool place with sufficient ventilation.
- Do not stop up, block nor cover the products vent holes.
- Do not place the product at places that are exposed to magnetic fields, doing so can cause the cooling fans inside the product to malfunction. Avoid placing the product in smoky, humid or dusty place.
- Do not place the product near humidifiers. Do not place the product in a place where radio interference may be caused. NOTICE 06 ENGLISH Product connection Before connecting the product to a device, consult the manual of the device to confirm that the device is suitable for connecting with this product and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with this product or the accessory is damaged. After making sure that this product and the devices are turned off, perform the connection, according to the following instructions. For details, consult the Operating Guide. (1)
!
WARNING Use only the appropriate accessories. Otherwise it could cause a fire or damage the product and devices.
- Use only the accessories specified or recommended by this products manufacturer. It may be regulated under some standards.
- Neither disassemble nor modify this product and the accessories.
- Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched.
!
CAUTION Before connecting this product to a network system, be sure to obtain the consent of the administrator of the network. Do not connect the WAN/LAN port to any network that might have the excessive voltage. If you use the product connected to the network, there is a risk of information leakage via the product. Also, since there is a fear of illegal operation, please be sure to perform network security measures including the following countermeasures under the responsibility of the customer.
- Use the product on a network that is secured with a firewall etc.
- When using the product on a system to which a PC is connected, it checks and removes infections of computer viruses and malicious programs on a regular basis.
- Change the password of admin / director / video manager, and limit the users who can login. For details, consult the Operating Guide. (1)
- Do not leak video data, authentication information (user name, password), various server information, etc. on the network.
- Do not install the product or its cable in places where it can be easily change connection. NOTICE Do not turn on or off this product while connected to a device in operation, unless that is directed in the manual of the device. Some input ports are selectable in the use. For details, consult the Operating Guide. (1) Be careful not to mistakenly connect a connector to a wrong port. 07 ENGLISH Connecting the power supply 1. Connect the power cord to the Power adaptor. 2. Put the DC plug of the power adaptor into the DC 24V connector of the product. 3. Firmly plug the power cords plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator lights up in steady red. Power button / indicator DC plug Power adaptor Power cord
!
WARNING Use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
- Do not touch the power cord with a wet hand.
- Only use the Power cord and the Power adaptor that came with the product. If it is damaged, consult your dealer to get a new one. Never modify the power cord and the Power adaptor.
- Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the product and easily accessible. Remove the power cord for complete separation.
- Do not distribute the power supply to multiple devices. Doing so may overload the outlet and connectors, loosen the connection, or result in fire, electric shock or other accidents.
- Connect the terminal for the AC inlet of power adaptor to the power outlet of the building using an appropriate power cord (bundled).
- When multiple power cords are included, please use the power cord that matches the outlet shape. This power adaptor is also designed for IT power systems with a phase-to-phase voltage of 220 to 240 V. NOTICE 08 ENGLISH Product setup The input port assignment must be set up from web browser by the administrator. For details, consult the Operating Guide. (1) Connection Please turn off this product when hook up other devices. For how to turn off the power, consult the "Turn off the power". Consult the below wiring schematic. Projector Computer Microphone Video output VGA / HDMI Mic audio input Line audio input Projector /
Mouse USB Network WAN Bluetooth speakerphone Antenna HD-SDI camera Power Video input SDI Audio input/output USB USB RS-232 out RS-232 in DI/DO Video input VGA / HDMI Audio mixer Line audio output Hard drive LAN Network camera Computer Computer Document cam DV PTZ camera Speaker with an amplifier Computer PTZ camera I/O devices USB USB drive
(continued on next page) 09 ENGLISH Connection (continued)
!
CAUTION Consult the administrator of Network before connecting to WAN/LAN port. Do not connect the LAN port to any network that might have the excessive voltage. Incorrect connection may cause the malfunction. Please connect cables with care. Turn off the speaker and this product at connection to avoid unexpected large volume flow. Adjust volume with care when using an amplified speaker. NOTICE Before connecting, consult the manual of device that is using with this product. The Length of LAN cable must be equal or less than 100m. When the length is over 100m, it may cause the quality loss on the image/sound or malfunction on network communication. The Length of BNC cable must be equal or less than 100m. Use RJ-45 connector when connecting to WAN/LAN port. For details, consult the Operating Guide. (1) RSS-Gen Issue 4 8.4 This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Industry Canada ICES-003 Compliance Label:
CAN ICES-3 (*)/NMB-3(*)
* Insert either A or B but not both to identify the applicable Class of ITE. 15.19 (All FCC application) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 (Part 15B unintentional radiator / including composite device) digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 15.21 (All FCC application) Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. 10 ENGLISH Basic operations Turning on the power 1. Make sure that the Power adaptor and power cord is firmly and correctly connected to the product and the outlet. 2. Make sure that the POWER indicator is lighted in steady red. 3. Press the (power) button on the product. Power button / indicator Press the power button to start automatically. When the power button is pressed, the power indicator lights red and green alternately. When startup is completed, the indicator lights in steady green. Turn on any connected devices prior to the product. After turning off the power, if the indicator is light in red it is possible to turn on the power. NOTICE Turning off the power 1. Press the POWER button on the product. The message Shutdown? appears on the screen for about 10 seconds. 2. Press the POWER button again while the message appears. the POWER indicator will begin blinking in red. Then the POWER indicator will stop blinking and light in steady red when shutdown completed. Power button / indicator Remove the power cord for complete separation. Turn off any connected devices prior to the product power off.
!
WARNING 11 ENGLISH Specifications Item Product Name Model Name Dimension Specification Lecture Capture Station MA-XL1 Approx. 430 mm(W) x 60 mm(H) x 206 mm(D)
(without rackmount) Approx. 480 mm(W) x 60 mm(H) x 206 mm(D)
(with rackmount) Weight (mass) Approx. 3.0 kg Power Requirement DC : 24V/2.5A AC : 100~240V/1.5A Power Consumption (Max.) 60W (Max.) Operating Temperature / Humidity 0C ~ 40C / 10% ~ 90% RH WAN, LAN 10 / 100 / 1000Mbps Ports Front audio output ............. SDI IN 1 ................................................... SDI IN 2 ................................................... SDI IN 3 ................................................... HDMI IN 1 ...................................... HDMI IN 2 ...................................... HDMI IN 3 ...................................... HDMI IN 4 ...................................... COMPUTER IN ........................ MONITOR OUT ....................... HDMI OUT ...................................... AUDIO IN ......................... MIC IN ............................. AUDIO OUT ...................... AUDIO IN(L,R) ................... AUDIO OUT(L,R) ................ USB TYPE A ........................................... USB TYPE A(INTERACTIVE) ..................... USB TYPE B 1 ........................................ USB TYPE B 2 ........................................ WAN ........................................................ LAN 1 ...................................................... LAN 2 ...................................................... LAN 3 ...................................................... CONTROL 1 ................................. CONTROL 2 ................................. DIDO ................................. Bluetooth antenna ..................................... 3.5 mm (stereo) mini jack x1 BNC jack x1 BNC jack x1 BNC jack x1 HDMI connector x1 HDMI connector x1 HDMI connector x1 HDMI connector x1 D-sub 15 pin mini jack x1 D-sub 15 pin mini jack x1 HDMI connector x1 3.5 mm (stereo) mini jack x1 3.5 mm (stereo) mini jack x1 3.5 mm (stereo) mini jack x1 detachable terminal block x1 detachable terminal block x1 USB Type A x3 USB Type A x1 USB Type B x1 USB Type B x1 RJ45 jack x1 RJ45 jack x1 RJ45 jack x1 RJ45 jack x1 Mini DIN 8 pin jack x1 Mini DIN 8 pin jack x1 detachable terminal block x1 SMA jack x1
(continued on next page) 12 ENGLISH Specifications (continued) Front 1 2 3 4 5 6 7 8 9 Back 10 11 12 No. Name Brief introduction 1 2 3 4 5 6 7 8 Audio volume meter Display audio level Bluetooth pairing indicator Show Bluetooth connection status USB indicator Show front USB storage status Recording start button Recording start and pause Recording stop button Recording stop Video switch button Video source switch; cycling switch for each assigned source Information button Short push: Information list appears and USB mouse control switch back from PC to the product Long push: Approx. 2 sec. Bluetooth pairing start Projector power button Power on / off button of PJLink compatible projector or Hitachi
/ Maxell projector. 9 Main power button Power on / off button for MA-XL1 10 Power connector 11 Reset button 12 Security bar DC : 24V / 2.5A Press about 15 seconds to Reset all settings to factory default value Security bar 13 ENGLISH Manufacturing year and month The manufacturing year and month of this product is indicated as follows in the serial number of the rating label on the product. Example:
T 9 A W 0 0 0 0 0 1 Manufacturing month: A=January, B=February, ... L=December Manufacturing year: 9=2019, 0=2020, 1=2021, ... NOTICE The information in this manual is subject to change without notice. The illustrations shown in this manual are example only. Your product may differ from the illustrations. The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. 14 ENGLISH MA-XL1
( )
(
)
!
01
( ) 02 02 03 03 03 04 05 06 07 08 09 09 11 11 11 12 14
!
!
!
/
/
/
02
!
( : )
-
-
-
-
2012/19/EU(WEEE) Hg Cd Pb 0. 0005%
0. 002% 0. 004%
03 A MaxellLtd. Lecture Capture Station 2014/53/EU http://www.maxell.eu/uploads/docs/PJ-DoC.pdf
!
-
-
-
-
-
04
*
(2 ) DIDO USB
( )+M4 x 6mm (8 )
( )**
URL 1 2 3 4 5 6 7 8 9
*
** (1) 1 4 7 2 5 8 3 6 9 http://biz.maxell.com/en/display_equipment/
(ENGLISH) Thank you for purchasing this Lecture Capture Station. Before using this product, be sure to read all manuals for this product. Please check the above web address where you may find the latest information for this product.
( ) 2021MAXL00 QR92741 Printed in Taiwan Lecture Capture Station MA-XL1 Users Manual (concise) Please read through this manual before using this product, in order to use safely and utilize well the product.
( ) R L
!
05
(1) 2 2 cm 2 cm
!
-
-
!
-
-
-
06
(1)
!
-
-
-
!
WAN/LAN
-
- PC PC
- admin / director / video manager
(1)
-
-
(1) 07 1. 2. DC DC 24V 3.
/
DC plug Power adaptor Power cord
!
/
-
-
-
-
- AC
-
220-240V IT 08 Web
(1) VGA / HDMI Mic Line
/
USB WAN HD-SDI SDI
/
USB USB RS-232 RS-232 DI/DO LAN VGA / HDMI Line DV PTZ PTZ I/O USB USB
( ) 09
( )
!
WAN/LAN LAN 100 100 /
BNC 100 WAN / LAN RJ-45 10 1. 2. 3. ( / )
/
1. ( / ) ? 10 2. ( / )
/
!
11 MA-XL1 430 mm( ) x 60 mm( ) x 206 mm( ) ( ) 480 mm( ) x 60 mm( ) x 206 mm( ) ( )
( ) 3.0 kg DC : 24V/2.5A AC : 100~240V/1.5A
( ) 60W (Max.)
/
0C ~ 40C / 10% ~ 90% RH WAN, LAN 10 / 100 / 1000Mbps audio output ............................ SDI IN 1 ................................................................ SDI IN 2 ................................................................ SDI IN 3 ................................................................ HDMI IN 1 ................................................... HDMI IN 2 ................................................... HDMI IN 3 ................................................... HDMI IN 4 ................................................... COMPUTER IN ..................................... MONITOR OUT .................................... HDMI OUT ................................................... AUDIO IN ...................................... MIC IN .......................................... AUDIO OUT ................................... AUDIO IN(L,R) ................................................ AUDIO OUT(L,R) ............................................. USB TYPE A ........................................................ USB TYPE A(INTERACTIVE) .................................. USB TYPE B 1 ..................................................... USB TYPE B 2 ..................................................... WAN ..................................................................... LAN 1 ................................................................... LAN 2 ................................................................... LAN 3 ................................................................... CONTROL 1 ............................................. CONTROL 2 ............................................. DIDO ............................................................. Bluetooth antenna .................................................. 3.5 mm (stereo) mini jack x1 BNC jack x1 BNC jack x1 BNC jack x1 HDMI connector x1 HDMI connector x1 HDMI connector x1 HDMI connector x1 D-sub 15 pin mini jack x1 D-sub 15 pin mini jack x1 HDMI connector x1 3.5 mm (stereo) mini jack x1 3.5 mm (stereo) mini jack x1 3.5 mm (stereo) mini jack x1 x1 x1 USB Type A x3 USB Type A x1 USB Type B x1 USB Type B x1 RJ45 jack x1 RJ45 jack x1 RJ45 jack x1 RJ45 jack x1 Mini DIN 8 pin jack x1 Mini DIN 8 pin jack x1 x1 SMA jack x1
( ) 12
( ) Front 1 2 Back 10 No. 1 2 3 USB 4 5 6 7 3 4 5 6 7 8 9 11 12 USB
/
;
: USB
: 2 8 / / PJLink Hitachi/Maxell 9 10 DC 11 12
/ MA-XL1 DC : 24V / 2.5A 15 MA-XL1 13
:
T 9 A W 0 0 0 0 0 1
: A= , B= , ... L=
: 9=2019, 0=2020, 1=2021, ... 14 Lecture Capture Station MA-XL1 Users Manual (concise) - Supplement Connection Projector Computer Microphone Video output VGA / HDMI Mic audio input Line audio input Projector /
Mouse USB Network WAN Bluetooth speakerphone Antenna HD-SDI camera Power Video input SDI Audio input/output USB USB RS-232 out RS-232 in DI/DO Video input VGA / HDMI Audio mixer Line audio output Hard drive LAN Network camera Computer Computer Document cam DV PTZ camera Speaker with an amplifier Computer PTZ camera I/O devices USB USB drive
(continued on next page) Dimensions About license etc. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and/
or other countries. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD
("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM License agreement of each software
(continued on next page) License agreement of each software (continued)
(continued on next page) License agreement of each software (continued)
(continued on next page)