41. Un-install or removing the current mouse driver Before installing the driver of the mouse, we suggest that you check if any other mouse driver installed in your system. If yes, in order not to make conflict, please un-install or remove that driver before installing the mouse. 2. Install the mouse 4-Way Scrolling driver a.Select setup.exe to install the driver from the CD. b.or you can download the 4-Vvay Scrolling driver from vendor's website. Trouble Shooting a. Make sure you have connected the receiver correctly to the computer's USB port. b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives. c. Make sure you have set the communication between the receiver and the mouse. Refer to the channel setting instruction (refer to No.3) in your manual. d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the package or download from your local brand vendor's website. e. Make sure that you are not working the mouse on glossy or reflective surfaces. f. Try unplugging then reconnecting the receiver cable to your computer. Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promotly. 2. Keep all batteries (used or new) out of the reach of children. To have the batteries with a regular check and replace new batteries ifthe mouse has not been used for a long time. Never dispose of batteries in fire, as they could explode. Always replace all the batteries atthe same time. Mixing old and new batteries will reduce overall performance and could cause leakage or rupture. 6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse. 7. Remove batteries from the electrical device ifthe device is not going to be used for a lang time. 8. If the performance of the batteries decreases substantially, it is time to replace the batteries.
ar FCC statement This equipment has been tested and found to comply with the limits fora class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in 4 particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Mini Wireless Optical Mouse eReorent or relocate the receiving antenna e Increase the separation between the equipment and receiver. e Connect the equipment into an outlet ona circuit different from that to which the receiver is connected To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices}
Fcc Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause undesired operation B158 User Manual The vireless Channel sets the radio frequency used for communication. e Access Paints use a fixed Channel. You can select the Channel used. 1 ows you to choose a Channel which provides the least interference and best performance. In the USA, and Canada, 11 channel are available. If using multiple Access Points, itis better if adjacent Access Points use different Channels to reduce interference ein "infrastructure" mode, Vvireless Stations normally scan all Channels, looking for an Access point. lf more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) IF using Ac-hoc" mode (no Access Point), all Vvireless stations should be set to use the same Channel. However, most WVireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join. All other brands and trademarks are the properties of their respective ownars. The product specifications are subject to change without notice.