FCC ID: 2AK3T-INSIGHT Insight Pro

Insight PRO 1080P Lite HD video transmission Insight PRO 1080P Lite Quick User Manual HDMI HDMI transmitter and receiver 1 2 3 3 HDMI After 3 steps finished above, the image will display on the devices which connect to the receiver in a few seconds (wireless or HDMI cable). Support multiple client devices Wi-Fi,. By connecting the Wi-Fi of the receiver, using a tablet or mobile phone to monitor the screen, support multiple devices to view at the same time. 1 2 , www.ARGUSFPV.com, APP After completing the steps of Figure 1 and Figure 2, visit our website www.ARGUSFPV.com on a mobile phone, tablet or computer to download the APP of the relevant platform. Search and connect the Wi-Fi signal with SSID name IN-***** on your device. Wi-Fi connection default password: 12345678 step A SSID IN-***** Wi-Fi step BWi-Fi 12345678 step C APPInsight Pro step D APP Run our APP (for example: Insight Pro).

* 5G Wi-Fi

* Please confirm that your device supports 5G Wi-Fi standard. By operating the APP to control the transmitter and receiver and display pictures on the device. AirUSB 1 Connect the transmitter. 1 www.argusfpv.com Windows Insight Pro Insight Pro Download and install the Insight Pro software for Windows from our website www.argusfpv.com. During the installation process, please trust the driver of Insight Pro. Wi-Fi. Turn on the receiver and connect your computer to the receiver's Wi-Fi. 2 Windows Insight PRO AirUSB AirUSB Run the Windows version of Insight PRO software

(The AirUSB function only takes effect when the software is running. If you only need to use the AirUSB function, you can minimize the program window.) 3 AirUSB As shown: Use our dedicated AirUSB accessory cable to connect the transmitter and camera. 4 USB USB Capture One 12 Lightroom Camera-Control-Pro After a few seconds, your computer will find a new USB device connected. (Similar to the operation of plugging a wired USB into a computer). As shown in the following figure, use Capture One 12 software to achieve remote online operation, shooting, instant photo acquisition, etc. You can use different software according to your preferences, including the official or unofficial software of the camera device. Including but not limited to Lightroom Camera-Control-Pro and other software, more ways to use it look forward to your development. 2 Indoor stand-alone use AirUSB USB AirUSB 5 AirUSB If you only need to use it in a close range environment, then you can use the stand-alone mode and use the receiver to implement the AirUSB function. Referring to the above illustration, connect the camera or other USB device to the AirUSB interface of the receiver through the conversion cable. Follow the 5 steps below, you can start using the receiver to achieve AirUSB function. 5G Wi-Fi

, 50 100 The usage distance of this mode depends on the capabilities of your device's wireless 5G Wi-Fi network card, which can provide an unobstructed range of about 50 to 100 meters.

* Windows10 Windows7

* Currently this feature only supports Windows 10 or Windows 7. PWM

(PWM output) Gimbal control demonstration 6 7PIN GND The transmitter provides a 6-channel 7PIN interface (including a GND). PWM PWM Insight Pro Windows PWM PWM PPM S.BUS PWM PPM S.BUS You can connect a gimbal that supports PWM signal control or other devices that support PWM signal control. Use our software Insight Pro (Android, Windows) to control the PWM signal output. If your device does not support PWM and only supports PPM or S.BUS, then you need to purchase an additional PWM conversion PPM or S.BUS conversion module.

(Serial Communication) Flight-controller demonstration 2 Uart 115200BT PixHawk TELEM 115200BT Uart1 Uart2 Uart Uart 1 12 2 Uart Wi-Fi TCP The transmitter and receiver each provide 2 sets of UART communication serial ports. Providing 115200BT full-duplex communication rate, we take the PixHawk flight-controller as an example to demonstrate how to communicate. You can also connect any device that supports this communication method. First, you must set your flight-controller TELEM interface to 115200BT. The flight-controller is connected to the Uart1 or Uart2 interface of the transmitter. As the host mode, the UART interface of the transmitter can communicate with multiple clients at the same time, and each client cannot communicate with each other. The Uart interfaces of the transmitter and the receiver correspond to each other (1 to 1, 2 to 2). The data from the UART interface is connected to your device via Wi-Fi via the receiver, and uses TCP to your device sends data. USB USB PC UART1 192.168.2.220 2018UART2 192.168.2.220 2019 PIX USB TCP QGroundControl Shown on the left: use the serial port to USB module to communicate directly with the computer. The computer communicates with the serial device on the transmitter via USB. Through a similar connection method, you can use the software on the PC to communicate with other devices through wireless transmission. You only need to fill in the corresponding address on the software to communicate. UART1 address 192.168.2.220 port 2018, UART2 address 192.168.2.220 port 2019, all PIX ground station software supports USB and TCP connection, it is recommended to use our exclusive QGroundControl version (supporting our proprietary video protocol). Battery indicator LED 100%

When the power is turned on, the power indicator will light up different numbers of LEDs according to the capacity of the battery. When the power is 100%, all the battery indicator lights are on. When the remaining one lights of the power indicator and flash, it means that the power is insufficient, please charge in time. Charge status indication TEYP-C Use the TEYP-C charging cable to connect to the charging port. When charging, the battery indicator will light up in red, and the indicator will flash when trickle charging. The indicator light will be steady green after the battery is fully charged.

() Pairing (transmitter and receiver pairing) If not necessary, please do not operate. This step is only applicable when you need to replace a damaged or missing transmitter or receiver. 1 45 Preparation for pairing: Disconnect all external devices on the transmitter and receiver, and then wait for 45 seconds after the transmitter and receiver are powered on. 2 1 RX BIN RX DATA 1 30 TX Short press (less than 1 second) the receiver (RX) pairing button, the button below the BIN mark in the green circle on the right, the DATA indicator at the upper right of the receiver (RX) will flash quickly, indicating that the pairing mode is entered, and the status will continue 1 minute. Therefore, please operate the transmitter

(TX) within 30 seconds. 3 5 TX BIN TX RX 1 RX DATA Long press (greater than 5 seconds) the pairing button of the transmitter (TX), the button below the BIN mark in the green circle on the right, after the transmitter (TX) enters the pairing mode, the data indicator on the upper right of the receiver (RX) will slow Flashes, the state will last for 1 minute. After successful pairing, the DATA indicator of the receiver (RX) will stop blinking and stay on. For more usage details, please pay attention to the updates of our dealers and websites. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.

Argus Technology (Shenzhen) Co., Ltd Agent Authorization Company: Argus Technology (Shenzhen) Co., Ltd Address: NO.5-6A, ZhongYan Business Building, Fuyong street, FuHai Road, Baoan, Shenzhen, China. Product Name: Insight Pro Model Number(s): Insight Pro Product Description: Insight Pro We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Kanglin Su Date: 2020/05/26 Name: _Kanglin Su Title: Manager Company: Argus Technology (Shenzhen) Co., Ltd

Argus Technology (Shenzhen) Co., Ltd FCC Software Configuration Control Declaration Date: June 1, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Insight Pro / Insight Pro Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Kanglin Su Title: Manger Signatureof applicant Date: 2020/06/01 FCC Software Configuration Control Declaration Rev1.1

Argus Technology (Shenzhen) Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/05/26 Subject; Request for Confidentiality FCC ID: 2AK3T-INSIGHT To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Kanglin Su Title: Manager