ADH300J COMPATIBLE WITH VARIOUS DEVICES PACKAGE CONTENTS FUNCTION IDENTIFICATION INSTALLATION AND OPERATION TV FM Television Smartphone Computer Tablet Radio Set-top Box Laptop OUTPUT JACK OPTIONS Optical OUT AUX/3.5mm RCA jacks labeled AUDIO OUT Other RCA jacks
(usually audio IN) Wireless Headphone Transmitter/Charging Base 3.5mm to 3.5mm Direct Line-In cable Rechargeable Battery*2
(Installed in Headphone) AC/DC Adaptor 3.5mm to RCA Cable Optical TOSLINK Audio Cable User Manual Wireless Headphone Optical input (recommended) Signal link Green LED Indicator
(Solid Green: connected)
(Flash: pairing)
(Flash Quickly: connect new headphone/reconnect) Power Red LED Indicator
(Solid Red: ON)
(Light out: OFF) ON/OFF Control (press 2 seconds: ON/OFF)
(press 5 seconds when OFF:
connect new headphone/reconnect) Red LED Indicator ON/OFF Charging Contacts Analogue audio input Green LED Indicator Volume +/-
Transmitter Charging Green LED Indicator Red LED Indicator Green LED Indicator Solid Green: charging/
Light out: fully charged Signal Red LED Indicator Solid Red: connect/
Flash: pairing CHARGING THE BATTERIES AUTO OFF Charge the Batteries for about 7 hours before first use.
- Transmitter will be OFF automatically if there is no audio source signal for around CAUTION 3 minutes. If the audio source signal returns, the transmitter will automatically WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The device must not be co-located or operating in conjunction with any other
- Headphone will be OFF automatically if there is no audio source signal for around long time. To protect your hearing, please do not use the headphone at high volume for a antenna or transmitter. Charging Duration: 5~7 Hours Turn OFF the Headphone. Retract the Headband. Place the Headphone on the Transmitter. switches ON. 3 minutes. Reconnect/Connect more Headphones Disconnect the power of Transmitter. Turn OFF the Headphone. Press ON/OFF control for 5 seconds until the Green LED flashes quickly. Connect the power of Transmitter. Headphone and Transmitter will be connected automatically. TROUBLESHOOTING No sound
- Ensure that the Transmitter power ON. Charging Green LED Indicator Solid Green: charging/
Light out: fully charged Signal Red LED Indicator
- Ensure that the Headphone is ON, Red LED Indicator is in solid red.
- The charge level of the Batteries may be too low. Recharge the Batteries.
- Audio device is ON and PLAY.
- The volume of headphone may be too low, adjust the volume to a moderate level. The audio signal input level is too low. Increase the volume of the audio device. Red LED Indicator Distortion Wireless transmission will produce electromagnetic signal which may interfere This device complies with FCCs radiation exposure limits set forth for an the heart pacemaker or other medical instruments properly function. uncontrolled environment Please follow your doctors instruction. NOTE: This equipment has been tested and found to comply with the limits for a TECHNICAL SPECIFICATIONS Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Transmission Mode: GFSK Carrier Frequency: 2.4GHz Operating Voltage: Transmitter/Charger DC 5V 550mA Headphone 2*1.2V AAA Frequency Response: 25Hz~20KHz Distortion: 0.5%
S/N Ratio: 70dB Operating Distance: 30 meters Music Time: 15~20 hours Charge Time: 5~7 hours ABOUT ARTISTE ARTISTE TECHNOLOGY LTD. The 6th Building, No. 173, Dunhe Road, Haizhu District, Guangzhou, Guangdong, China www.artiste-audio.com Tel: 86-20-66319168 Made In China AUDIO IN OPTICAL DC IN 3.5mm Audio IN Socket Optical TOSLINK Audio IN Socket NOTE:
DC IN Socket Please note that only one input (either analogue audio input or optical input/TOSLINK) must be connected. If both the analogue audio input and the optical input/TOSLINK are connected, the priority use is analogue input. Green LED Indicator
- Ensure the volume level of Headphone is set to an approximate level.
- The Headphone is too far from the Transmitter, move it closer. The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposure condition without restriction.
- The audio signal input level is too low. Increase the volume of the audio device. FEATURES 1. 30 Meters Wireless Transmission Range 2. 15~20 Hours Working Duration 3. 2.4GHz Digital Wireless Technology 4. One Transmitter can be connected to Several Headphones P9 P10 P11 P12 P13 P14 P15 P16