FCC ID: 2APBSDH1001E-001T 2.4GHz Digital Wireless Headphone

7g 36P 98-01-2179D 125X170mm 7 D1 17 D1 Wireless TV Headphones D1 Wireless TV Headphones D1 Please scan QR code and watch video guide 1. :

2. :

1. Whats In The Box:

2. Charging:

3.5 Headphone Transmitter 3.5 Audio Cable 1 2

4.1

4.2 4.3

4.4 User Guide

-2-

4.2

() AUDIO ATT. 0 dB

-8 dB COAXIAL OPTICAL

-1-

4. How To Use 4.1 Optical Output

(Optical connection works best, please use it connection rst)

() 3.5

() OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB Headphone Transmitter Battery(Installed in headphone) 3.5mm AUX cable Headphone

(Installed in headphone) Transmitter Battery Coaxial Audio Cable AC/DC Adaptor OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB 100%

5-7 6 3. AUX/3.5 RCA 3.5 2

-1-

4. 4.1

() OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. TV 3. 6. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB OPTICAL DVD-8dB CDMP3iPod 0dB 2. OPTICAL OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. 5. 7. 5.

-3-

4.3 AUX/3.5 3.5() 3.5 3.5 TV 3.5 3. 6. COAXIAL OPTICAL AUDIO ATT. 0 dB

-8 dB OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB AUDIO DVD-8dB CDMP3iPod 0dB 2. OPTICAL OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. 5. 7. 5.

-5-

TV 3. 6. 4.4 TV 3. 6. OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB AUDIO DVD-8dB CDMP3iPod 0dB 2. OPTICAL OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. 5. 7. 5.

-4-

OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB COAXIAL DVD-8dB CDMP3iPod 0dB 2. OPTICAL OPTICAL COAXIAL AUDIO ATT. 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. 5. 7. 5.

-6-

5.

-7-

-9-

6. OPTICAL COAXIAL

-8-

AUDIO ATT. 0 dB

-8 dB 7. OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA OPTICAL

-10-

8. 3.5 AV 3.5 1. 2.3.5 3. PCM 3.5 PCM 3.5AUDIO OPTICAL COAXIAL

-12-

-11-

30 5 ATT0dB

-13-

5 5. 3.5 AUDIO OPTICAL COAXIAL ATT0dB PCM 12 9.

-14-

2.4 GHz 5V 21.2V AAA 20 Hz - 20 kHz 12 4-6 0.5%

85dB 10 30

-15-

11. 1. 2. 3. 4. 5. 6. 10. D1

1Turn OFF the headset 2Retract the headphone band Green 100% Light O CHARGING:

5-7 Hours Before use, please charging for 6 hours. 3. Check Your TV/Audio Source output options Optical Output RCA(Red/White AUDIO OUT AUX/3.5mm Coaxial Output Other RCA jacks Jack Options Natively Supported Sound Out Please refer to Point:

Both Headphone and TV 4.1 Both Headphone and TV 4.2 Headphone 4.3 Both Headphone and TV 4.4 N/A

-2-

4.2 RCA AUDIO OUT(Red/White ports labeledAudio Out) Headphone Transmitter RCA AUDIO OUT RCA audio out, not audio in port TV RCA AUDIO OUT 3. Plug into TV Light(Blue) Light(Green) 6. Hear Sound. COAXIAL OPTICAL

(Installed in headphone) Battery AUDIO ATT. 0 dB

-8 dB RCA Audio Cable AC/DC Adaptor OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. Plug in AUDIO For TV/DVD/Hi-Fi, switch to -8dB. For CD/MP3/iPod/Smart phone, switch to 0dB. 2. Switch function button OPTICAL OPTICAL COAXIAL AUDIO ATT. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. Play sound 5. Turn on

(If the headphone ashes GREEN, 7. Re-Pair Step to re-pair the item.) wollof esaelp If no sound, please check the TV setting, ot refer 5. TV setting . RCA Audio Cable Optical Audio Cable RCA - Female 3.5mm cable Coaxial Audio Cable AC/DC Adaptor Rechargeable Battery*2

(Installed in headphone) Headphone Transmitter Battery Optical Audio Cable AC/DC Adaptor OPTICAL COAXIAL

(Installed in headphone) AUDIO ATT. 0 dB Optical Output Optical audio out, not audio in port

-8 dB OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA NOTE The plastic caps need to be removed 1. Plug in OPTICAL For TV/DVD/Hi-Fi, switch to -8dB. For CD/MP3/iPod/Smart phone, switch to 0dB. 2. Switch function button OPTICAL OPTICAL COAXIAL AUDIO ATT. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB 0 dB

-8 dB COAXIAL OPTICAL RIGHT TV Optical Output 3. Plug into TV Light(Blue) Light(Green) 6. Hear Sound. RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. Play sound 5. Turn on

(If the headphone ashes GREEN, 7. Re-Pair Step to re-pair the item.) wollof esaelp If no sound, please check the TV setting, ot refer 5. TV setting .

-3-

4.3 AUX/ 3.5mm Audio Out

-4-

4.4 Coaxial Output RCA - Female 3.5mm cable 3.5 AUDIO OUT 3.5mm audio out, not audio in port TV 3.5 AUDIO OUT 3. Plug into TV Light(Blue) Light(Green) 6. Hear Sound. COAXIAL OPTICAL AC/DC Adaptor AUDIO ATT. 0 dB

-8 dB OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. Plug in AUDIO For TV/DVD/Hi-Fi, switch to -8dB. For CD/MP3/iPod/Smart phone, switch to 0dB. 2. Switch function button OPTICAL OPTICAL COAXIAL AUDIO ATT. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. Play sound 5. Turn on

(If the headphone ashes GREEN, 7. Re-Pair Step to re-pair the item.) wollof esaelp If no sound, please check the TV setting, ot refer 5. TV setting .

-5-

CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful which can be determined by interference to radio or television reception, turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

-8-

-10-

8. Troubleshooting Problem Possible cause Comes back with full volume for a few seconds Possible solutions The headset cannot keep the When turn on the headphone, keep the TV sound low or turn volume dowm volume, default volume is high. before wear it. Sound only on one ear. It may connect to 3.5mm audio

& video port(3.5mm AV port), only one channel of audio will output. Use with RCA connection, coaxial or optical connection. The headset has sound, but TV has no sound. Or both TV and headphones have sound. 3.5mm AUX port only supports that headset receives sound, with TV no sound. While, using RCA and optical port, both TV and headphone get sounds. Meanwhile, need to set the audio mode on TV. Don't work on our optical TV. Setting is wrong. 1. Use RCA connection or optical connection. For watching TV quietly alone, click MUTE key to close the TV speaker by TV remote. 2. Ensure TV mm5.3 htiw tesdaeH ot tes si rekaepsconnection. TV speaker is set to External Speaker with RCA or optical connection. 3. Set the digital audio output of your device/audio source to

"PCM" on TV. Check the TV setting:

3.5mm AUX and RCAHeadphone Optical/Coaxial Digital Sound Out <PCM>

Transmitter setting:

3.5mm AUX and RCAAUDIO Optical OPTICAL Coaxial COAXIAL OPTICAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA 1. Plug in COAXIAL For TV/DVD/Hi-Fi, switch to -8dB. For CD/MP3/iPod/Smart phone, switch to 0dB. 2. Switch function button OPTICAL OPTICAL COAXIAL AUDIO ATT. OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB 0 dB

-8 dB COAXIAL OPTICAL RIGHT RIGHT LEFT COAXIAL AUDIO IN POWER LEFT AUDIO IN POWER OFF DC IN 5V 550mA ON DC IN 5V 550mA OFF ON 4. Play sound 5. Turn on

(If the headphone ashes GREEN, 7. Re-Pair Step to re-pair the item.) wollof esaelp If no sound, please check the TV setting, 5. TV setting . ot refer Coaxial Output Coaxial audio out, not audio in port TV Coaxial Output 3. Plug into TV Light(Blue) Light(Green) 6. Hear Sound.

-6-

5. TV Setting Note:Other TVs are similar to the settings. Or contact your TV manufacturer for more details.

-7-

-9-

6. Phone-Test If no sound after connect with TV, Please use phone to test the headphone whether work great,If work great, Please try to re-pair and connect headphone to Your TV.If also has problem, please feel free to contact us to solve the problem in your favor. 7. Re-Pair Step OPTICAL AUDIO ATT. 0 dB

-8 dB OPTICAL COAXIAL COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA OPTICAL AUDIO ATT. COAXIAL 0 dB

-8 dB COAXIAL RIGHT LEFT AUDIO IN POWER OFF ON DC IN 5V 550mA Turn the power button to OFF of transmitter. OPTICAL Turn o the headphone and then turn it on again,press and hold the headphone power button until the red light change to quickly ashing green light. Turn on the power button to ON of the transmitter , you will hear a beep from the headphone, and then headphone change from ash green to Steady green light. Indicates successful pairing Note:Please remember let the headphone ash green light, then turn on the power button to ON of the transmitter, If you do not follow the sequence, the connection will be unsuccessful

-11-

The batteries are already installed on the headphones before shipping. Problem Possible cause When the package is recevied, the batteries are in the earphone, and some parts are lost. Cannot not charge The volume control doesn't work. Poor charge contact since the charging pin are not contact correctly. Button is defective. Connection is interrupted due to the distance being too far

(over 30M / 100ft). Signal is shielded. Headphones will automatically switch OFF if no audio signal or too weak sound is received in 5 minutes. So if no audio input or too weak, will turn o. Sound dropouts/

disappear Sound is too low Volume of headset is low. Volume of the analog audio source is adjusted too low. Possible solutions Contact us, will ship the missing parts to you, and compensate you. Please retract the headphone band to contact with charging pin correctly when charging. Please contact us, we will replace a new set to you. Keep closer to the transmitter. Remove obstacles between the transmitter and headphones. Play TV sound again and restart the headset. Switch ATT. Button to right side

(0dB, -8dB). Turn up the volume of headset. Change connection, optical connection will get a better sound quality. Increase the volume on the analog audio source to at least a medium level.

-12-

-13-

Possible solutions Play TV sound again and restart the headset. Headphones will automatically switch OFF if no audio signal or too weak sound is received in 5 minutes. So if no audio input or too weak, will turn o. Problem Possible cause Easy to use at the beginning, it doesn'y work later, no sound, often stop working, and cannot work for 12 hours 9. SEPCIFICATIONS ITEM Transmitter Mode:

Carrier Frequency:

Operating Voltage:

Frequency Response:

Work Time:

Charging Time:

Distortion:

Signal-to-noise Ratio:

Range:

SPECIFICATION Digital Hopping System 2.4 GHz Transmitter 5V;

Headphone 2*1.2V AAA 20 Hz - 20 kHz 12 hours 4-6 hours 0.5%

85dB Obstacle 10 meters, barrier-free 30 meters Possible solutions WiFi routers and other wireless transmitters. Please see the 5. RE-PAIR STEP to re-pair the unit. Problem Possible cause Static, because other wireless Keep the transmitter away from the TV, devices will interfere with the signal of headset. The LED on headphone is RED. It means the transmitter doesn't pair with the headphone. Pair between headphone and transmitter is failed. Power o, or battery is low. Wrong audio input is selected. Audio plug is not properly connected. Audio source is switched o. OPTICAL/COAXIAL/AUDIO select switch setting wrong. No sound, only buzz sound, static, I tried everything, doesn't work. Charge the battery, turn on headset. Select the other AUDIO OUT. Check the audio plug connection. Switch the audio source on. Connect via 3.5mm AUX or RCA cable, please switch to AUDIO. Connect via optical cable, please swtich to OPTICAL. Connect via coaxial cable, please switch to COAXIAL. Switch ATT. Button to right side

(0dB, -8dB). Turn up the volume of headset. Set the digital audio output of your device/audio source to "PCM" on TV. Increase the volume on the audio source to at least a medium level /

Deactivate the muting function from the audio source. Contact us, will ship the replace parts to you. Volume of headset is low. Digital audio connection uses incompatible data transmission settings. Volume of the analog audio source is either set to the minimum or is on mute. Audio cable is defective.

-14-

10. INDICADOR LED Model

-15-

11. NOTE 1. Be sure to turn on the headset until after the completion of the connection. If you turn on the headphone rst, then connect to device via cable, you will hear current noise, even blasting sound, because of the connect between cable and port. 2. Never attempt to recharge conventional dry cells. 3. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such sunshine, re or the like. 4. Never use another type of battery or non-rechargeable batteries to replace the rechargeable (LR03/AAA) batteries supplied. 5. When the headphones are not in use, switch it OFF to avoid damaging the batteries. 6. Excessive sound pressure from earphones and headphones can cause hearing loss. The blue light goes out after a few Blue light is o, green light is on Indicator light Blue light ashes and then lights up Blue light o minutes (standby) Blue light is on Green light o Red light is on Red light turns green Green light o Red light ashes after a few minutes Red light turns Flashing green Green light is on The red light stays on for a few minutes Red light ashes Status Power on Turn O

(search for pairing) Successful pairing

(no audio input) Audio input after standby charging nished charging Fiber optic/coaxial switch No audio source input in ber/coaxial mode Power on Turn O Re-pair Successful pairing

(with audio input) Successful pairing

(no audio input) Not enough power Transmitter D1 Headphone

-16-

-17-

-16-

Made In China

-17-

2.4GHz Digital Wireless Headphone FCC ID:2APBSDH1001E-001T The label is on the bottom of the product

(ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2APBSDH1001E-001T

[ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Qi Gang Zhao)

(ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.) Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2APBSDH1001E-001T

[ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Qi Gang Zhao) Rev 1/26/2023

(ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2APBSDH1001E-001T Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(Block Diagram, Schematics, Operational Description) File Name

(Block Diagram, Schematics, Operational Description) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-term confidentiality period: 180 days Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(External Photos, Test Setup Photos, Manual, Internal Photos) File Name

(External Photos, Test Setup Photos, Manual, Internal Photos,) Sincerely,

(printed name) Qi Gang Zhao

ARKON ELECTRONICS (HUIZHOU) CO., LIMITED. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-10-28 SUBJECT: FCC ID: 2APBSDH1001E-001T To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.

Qi Gang Zhao

Family model description Letter

(ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.)

(Current Date) 2023-10-28 FCC ID2APBSDH1001E-001T Product name 2.4GHz Digital Wireless Headphone Brand name ARKON, ARTISTE, EMERSON, DAYSNEW, Avantree, Naxa, Victor Test Model name DH1000K Additional model name EE-9000; DH1000J; D1000AJ; DH1000T; DH1000L;

D1;WSHT-280; Item 12281; EE-9000-YYVE-9000-

YYNE-9000-YY (YY means unit color, it can be A to Z or N/A) Deviation of models The models are only different for model name, appearance color and trademark Signature:

Name: Qi Gang Zhao Title: Project Manager Company Name : ARKON ELECTRONICS (HUIZHOU) CO., LIMITED. Company Address: NO.4 Taihao Road, High-tech Industrial Park,Sandong Town, Huicheng District,Huizhou, Guangdong, China Page 1 of 1

(ARKON ELECTRONICS (HUIZHOU) CO., LIMITED.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-10-28 SUBJECT: FCC Application for FCC ID: 2APBSDH1001E-001T To Whom It May Concern:

We, the undersigned, hereby authorize _Andy Yeh at Hwa-Hsing (Dongguan) Testing Co., Ltd._ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by _ Andy Yeh at Hwa-Hsing (Dongguan) Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Qi Gang Zhao

(Must be signed by the person that is listed on the FCC Website)

NICS (HUIZH High-tech In HOU) CO., L ndustrial Par LIMITED.]

rk,Sandong ELECTRON

[ARKON

[NO.4 Ta aihao Road, Guangdo ong, China]

u]

[Huizhou

[Guangd ong]

[China]

Date: [20 023-10-28]

Town, Huich hengDistrict

,Huizhou, Federal C Authoriza 7435 Oa Columbia tions Comm Communicat valuation Div ation and Ev kland Mills R Road 6 a, MD 21046 mission vision FCC ID:

2APBSDH1 001E-001T US A gent A Attestat tion Sta tement

/ Part 2 2.911(d)

)(7)

[ARKON designate

[2APBSD ELECTRON ed FCC US A DH1001E-00 NICS (HUIZH Agent, LLC t 01T]. HOU) CO., L to accept se LIMITED.]cer rvice of proc rtifies, that as cess on our b s of [2023-10 behalf for FC 0-28], we ha CC ID:

ave

[ARKON process i terminate conclusio equipmen ELECTRON in the United ed all market on of any Co nt, whicheve NICS (HUIZH d States for n ting and imp ommission-re er is later. HOU) CO., L no less than ortation of th elated admin LIMITED.], ac one year aft he applicable nistrative or ju ccepts to ma ter either the e equipment udicial proce aintain an ag grantee has within the U eeding involv gent of servic s permanent U.S., or the ving the ce of tly FCC US the desig Acoustics Agent, LLC, gnated agent s Limited] for accepts as t for the purp r FCC ID: [2A of the date o pose of acce APBSDH100 of the filing o pting service 01E-001T]. of this applica e of process ation, the ob on behalf of ligation of be f [Minami eing

nformation:

, LLC C US Agent, Designat Company FRN: 003 Address:

Contact P Phone: 7 Email: Su ted Agent In y Name: FCC 33402884 3722 Illinois s Avenue, Sa Payne Person: Tim 8 708-571-3148 CUSAgent.co upport@FCC om aint Charles,

, IL, 60174, U USA Sincerely y, Company

(HUIZHO Company y: [ARKON E OU) CO., LIM y Represent ELECTRON MITED.]

ICS ative: [Qi Ga ang Zhao]

Designat ted Agent: F CC US Agen nt, LLC Designat ted Agent Re epresentativ e: Tim Payn e Signature e:

Signature e: