Powered by U SER MANUAL Smart True HEPA Air Purifier Model: Core 200S Questions or Concerns?
Please contact us MonFri, 9:00 am5:00 pm PST/PDT at support@levoit.com or at (888) 726-8520. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 1 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 1 6/23/20 3:33 PM 6/23/20 3:33 PM Table of Contents Specifications Voltage AC 120V, 60Hz Rated Power 37W Effective Range 183 ft / 17 m CADR Operating Conditions 118 CFM / 200.6 m/h Temperature:
14104F / -1040C Humidity: < 85% RH Noise Level 2448dB Dimensions 8.1 x 8.1 x 12.6 in /
20.5 x 20.5 x 32 cm Weight 6.6 lb / 3 kg Note: To access additional smart functions, download the free VeSync app (see page 7). Package Contents Specifications Safety Information Getting to Know Your Smart Air Purifier Controls Getting Started VeSync App Setup Using Your Smart Air Purifier VeSync App Functions About the Filter Care & Maintenance Troubleshooting VeSync App Troubleshooting FCC Statement Warranty Information Customer Support 2 2 3 4 5 6 7 8 9 10 12 14 16 17 18 19 Package Contents 1 x Smart Air Purifier 1 x True HEPA Filter (Pre-Installed) 1 x User Manual 1 x Quick Start Guide 2 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 2 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 2 6/23/20 3:33 PM 6/23/20 3:33 PM S A F E T Y I N F O R M AT I O N To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety Power & Cord Only use your air purifier as described in this Keep the air purifier near the outlet it is manual. plugged into. Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard. Do not use the air purifier outdoors. Keep the air purifier away from water, and wet or damp areas. Never place in water or liquid. Do not use in excessively humid areas. Keep the air purifier away from heat sources. Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present. Keep 5 ft / 1.5 m away from where oxygen is being administered. Supervise children when they are near the air purifier. air purifier. purifier. Do not place anything into any opening on the Do not sit or place heavy objects on the air Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners. Always unplug the air purifier before servicing
(such as changing the filter). Do not use the air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (see page 19). WARNING: Do not use this air purifier with solid-state speed controls (such as a dimmer switch). Not for commercial use. Household use only. Never place the cord near any heat source. Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances. Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. This air purifier uses standard US 120V, 60Hz outlets. If using outside the US, check for compatibility. Electromagnetic Fields (EMF) Your Levoit air purifier complies with all standards regarding electromagnetic fields
(EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. READ AND SAVE THESE INSTRUCTIONS 3 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 3 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 3 6/23/20 3:33 PM 6/23/20 3:33 PM G E T T I N G TO K N OW YO U R S M A R T A I R P U R I F I E R A. Fan Speed Indicators B. Fan Speed Button C. On/Off Button D. Sleep Mode Button E. Timer Button F. Timer Indicators G. WiFi Indicator H. Night Light Button I. Display Lock Button J. Check Filter Indicator K. Display Off Button L. Air Outlet M. Housing N. Air Inlet O. Power Cord P. Filter Cover Q. True HEPA Filter A B C D E F L M N P Q G H I J K O Front Back, upside down 4 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 4 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 4 6/23/20 3:33 PM 6/23/20 3:33 PM C O N T R O L S On/Off Button Turns the air purifier on/off. Press and hold to configure the air purifier. See the VeSync in-app instructions for more information. WiFi Indicator Turns on, off, or blinks to indicate configuration status. See the VeSync in-app instructions for more information. Cycles through fan speeds:
I (low), II (medium), and III
(high). Tapping the Fan Speed Button while the air purifier is in Sleep Mode will exit Sleep Mode. Sleep Mode Button Turns Sleep Mode on (see page 8). Press and hold for 3 seconds to reset the Check Filter Indicator. Timer Button Cycles through timer options (see page 8). Night Light Button Turns the night light on/off
(see page 9). Display Off Button Turns the display off (not including the night light). Tap any button (except
) to turn the display back on. Prevents current settings from being changed (see page 9). Blinks when any other button is tapped to indicate that Display Lock is on. Check Filter Indicator Lights up when the filter should be checked (see Check Filter Indicator, page 12). Reset the Check Filter Indicator light by pressing and holding the Sleep Mode button for 3 seconds. Fan Speed Button Display Lock Button D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 5 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 5 6/23/20 3:33 PM 6/23/20 3:33 PM 5 G E T T I N G S TA R T E D 1. Flip the air purifier over. Twist the filter cover counterclockwise and remove it.
[Figure 1.1]
2. Remove the filter from its plastic packaging and place the filter back into the air purifier. [Figure 1.2]
3. Replace the filter cover and twist clockwise to lock. [Figure 1.3]
4. Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 in / 38 cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains. [Figure 1.4]
cover should snap shut Figure 1.1 Figure 1.3 15 in /
38 cm 15 in /
38 cm Figure 1.2 Figure 1.4 6 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 6 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 6 6/23/20 3:33 PM 6/23/20 3:33 PM V E S Y N C A P P S E T U P 1. To download the VeSync app, scan the QR code or search VeSync in the Apple App Store or Google Play Store.
[Figure 2.1]
2. Open the VeSync app. Log In or Sign Up. 3. Follow the in-app instructions to set up your smart air purifier. Figure 2.1 C O N N E C T W I T H A M A Z O N A L E X A O R G O O G L E A S S I S TA N T You can use the VeSync app to connect your smart air purifier to Amazon Alexa or Google Assistant. Please follow in-app instructions to set up your voice assistant. Note: You must create your own VeSync account to access voice assistants. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 7 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 7 6/23/20 3:33 PM 6/23/20 3:33 PM 7 U S I N G YO U R S M A R T A I R P U R I F I E R Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features. Sleep Mode Note:
Timer General Operation 1. Plug in and tap to turn on the air purifier. The fan will start on level I.
[Figure 3.1]
2. Optionally, tap to change fan speed between I, II, and III. The indicators are not buttons and cannot be used to change the fan speed. The fan speed indicators will light up when Fan speed III is the loudest, but cleans air active. the quickest. For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (level III) for 1520 minutes before using a lower speed. To effectively clean air, keep windows and doors closed while the air purifier is on. 3. Tap to turn off the air purifier. Sleep Mode dims all icons to half brightness and operates quietly by using a fan speed lower than fan speed I. Tap to turn Sleep Mode on. Note:
Tapping will exit Sleep Mode. You can still adjust the night light while the air purifier is in Sleep Mode. You can manually set a timer for 2, 4, or 8 hours using the display buttons. You can also set a timer for 1 to 24 hours through the VeSync app. 1. Tap repeatedly to select a time. The timer will start automatically. Note:
The indicators are not buttons and cannot be used to select a time. The timer indicators will light up blue when active. indicator lights up when a timer is set up through the app. 2. Once the timer has finished, the air purifier will turn off. 3. To cancel a timer, tap until all timer indicators are off. Note:
You can change the fan speed at any time while the timer is on. The timer will restart if the time is changed. Figure 3.1 8 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 8 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 8 6/23/20 3:33 PM 6/23/20 3:33 PM Night Light You can choose between 2 night light brightness levels, even when the air purifier is turned off (as long as it is still plugged in). 1. Tap once to turn on the light. 2. Tap a second time to dim the brightness to half. 3. Tap a third time to turn off the light. Note: Turning off the display will not turn off the night light. V E S Y N C A P P F U N C T I O N S The VeSync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available. Remote Control Change any air purifier settings through the app, even while the Display Lock is on. Display Lock Schedules Create and customize schedules for your air purifier to match your routines. Timer Function hours. Set a timer setting between 1 and 24 Filter Replacement Info Keep tabs on remaining filter life by checking the filter life percentage in the app. Shop for replacement filters. Locking the display prevents settings from being accidentally changed. Buttons will not respond to being tapped. 1. Tap and hold for 3 seconds to lock/
unlock the display. 2. While the display is locked, up. If other buttons are tapped, blink 3 times. will light will Memory Function Even while turned off, as long as the air purifier is plugged in, it will remember its previous fan speed, Sleep Mode, and Display Lock settings. When unplugged, the air purifier will remember the fan speed and Sleep Mode, but not Display Lock or Display Off. Note: The memory function does not work with timers or night light settings. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 9 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 9 6/23/20 3:33 PM 6/23/20 3:33 PM 9 A B O U T T H E F I LT E R The air purifier uses a 3-stage filtration system to purify air. A B C A. Nylon Pre-Filter Captures large particles such as dust, C. High-Efficiency Activated Carbon Filter lint, fibers, hair, and pet fur. Physically adsorbs smoke, odors, and fumes. Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs). Maximizes the filters life by protecting it. B. True HEPA Filter Removes at least 99.97% of airborne particles 0.3 micrometers (m) in diameter. Filters small particles such as mold spores, tiny dust particles, smoke particles, and allergens such as pollen, dander, and mites. 10 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 10 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 10 6/23/20 3:33 PM 6/23/20 3:33 PM Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become moldy. Note: Water or moisture will allow mold to grow. Air purifiers cannot solve an existing mold problem, only capture airborne mold spores and reduce odors. Essential Oils Do not add essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasant smell. Do not use diffusers near the air purifier. ABOUT THE FILTER (CONT.) Clean Air Delivery Rate Humidity This air purifier has a Clean Air Delivery Rate of 118 cubic feet per minute (CFM), or 200.6 m/h. Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that it produces per minute. This is based on removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifiers highest speed. Air Change per Hour The air change rate is how many times all of the air in a room can be purified (or changed) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft /
2.4 m ceilings. For smaller rooms, the air change per hour will increase. The Core 200S has an air change per hour of 5, which means it can change air 5 times each hour at the max speed. This air purifier is recommended for use in a single, closed room up to 183 ft / 17 m. Note: To effectively clean air, keep windows and doors closed while the air purifier is on. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 11 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 11 6/23/20 3:33 PM 6/23/20 3:33 PM 11 Resetting the Check Filter Indicator Reset the Check Filter Indicator when:
A. lights up red. 1. Replace the filter (see page 13). 2. Turn on the air purifier. 3. Press and hold for 3 seconds. will blink 3 times and turn off once successfully reset. B. The filter was changed before lit up. 3. Press and hold for 3 seconds. will blink 3 times and turn off once successfully reset. Note: You can also reset the Check Filter Indicator in the VeSync app. C A R E & M A I N T E N A N C E Cleaning the Air Purifier Unplug before cleaning. Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry. Vacuum the inside of the air purifier. Do not clean with abrasive chemicals or flammable cleaning agents. Check Filter Indicator will light up as a reminder to check the filter. Depending on how often you use the air purifier, the indicator should turn on within 68 months. You may not need to replace your filter yet, but you should check it when turns on. Cleaning the Filter The outer pre-filter should be cleaned every 24 weeks to increase efficiency and extend the life of your filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles. Do not clean the filter with water or other liquids. [Figure 4.1]
Figure 4.1 Filter When to Clean How to Clean When to Replace Nylon Pre-Filter Every 24 weeks Use a soft brush or vacuum hose
[Figure 4.1]
True HEPA &
High-Efficiency Activated Carbon Filters Do not clean 68 months 12 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 12 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 12 6/23/20 3:33 PM 6/23/20 3:33 PM CARE & MAINTENANCE (CONT.) When Should I Replace the Filter?
Check the VeSync app to see your remaining filter life. The filter should be replaced every 68 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off. You may need to replace your filter if you notice:
Increased noise when the air purifier is on Decreased airflow Unusual odors A visibly clogged filter Note:
To maintain the performance of your air purifier, only use official Levoit filters. To buy replacement filters, visit Levoits online store. Go to levoit.com for more information. Remember to reset after changing the filter (see page 12). Replacing the Filter 1. Unplug the air purifier. Flip the air purifier over and remove the filter cover
(see Getting Started, page 6). 2. Remove the old filter. 3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier. [Figure 4.2]
4. Unwrap the new filter and place it into the housing (see Getting Started, page 6). 5. Replace the cover. Plug in the air purifier. page 12). 6. Reset the Check Filter Indicator (see Figure 4.2 Storage If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store in a dry place to avoid moisture damage. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 13 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 13 6/23/20 3:33 PM 6/23/20 3:33 PM 13 T R O U B L E S H O OT I N G Problem Possible Solution Plug in the air purifier. Air purifier will not turn on or respond to button controls. Airflow is significantly reduced. Make sure there are at least 15 in / 38 cm of clearance on all sides of the air purifier. Check to see if the power cord is damaged. If so, stop using the air purifier and contact Customer Support (see page 19). Plug the air purifier into a different outlet. The air purifier may be malfunctioning. Contact Customer Support (see page 19). Make sure the filter is removed from its packaging and properly in place (see page 6). Tap to increase the fan speed. The pre-filter may be clogged by large particles, such as hair or lint, blocking air flow. Clean the pre-filter (see page 12). Replace the filter (see page 13). Make sure the filter is properly in place with plastic packaging removed (see page 6). Make sure the air purifier is operating on a hard, flat, level surface. The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support
(see page 19). Do not try to repair the air purifier. Air purifier makes an unusual noise while the fan is on. Replace the filter (see page 13). Strange smell coming from the purifier. Clean the filter or replace if necessary. Make sure not to use your air purifier in an area with high humidity or while diffusing essential oils. 14 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 14 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 14 6/23/20 3:33 PM 6/23/20 3:33 PM TROUBLESHOOTING (CONT.) Problem Possible Solution Tap to increase the fan speed. Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet). Poor air purification quality. Make sure the filter is removed from its packaging and properly in place (see page 6). Close doors and windows while using the air purifier. Make sure the room is smaller than 183 ft / 17 m. The air purifier may not be as effective in larger rooms. Replace the filter (see page 13). Reset the Check Filter Indicator (see page 12). is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 12). If you dont use your air purifier often, on. will take longer to turn is still on after replacing the filter. has not turned on within 8 months. turned on before 6 months. is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 12). If you run your air purifier frequently, will turn on sooner. If your problem is not listed, please contact Customer Support (see page 19). D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 15 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 15 6/23/20 3:33 PM 6/23/20 3:33 PM 15 V E S Y N C A P P T R O U B L E S H O OT I N G My smart air purifier isnt connecting to the VeSync app. During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the network is working correctly. Make sure the WiFi password you entered is correct. There should be no spaces at the beginning or end of the password. Test the password by connecting a different electronic device to the router. If youre manually typing in the SSID and password, double check that both are entered correctly. Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier. Your router may need to be at a higher location, away from obstructions. Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference. If youre using a VPN, make sure its turned off while setting up your air purifier. Disable portal authentication for your WiFi network. If portal authentication is enabled, the air purifier will not be able to access your WiFi network, and setup will fail. Note: Portal authentication means that you need to sign in to your WiFi network through a web page before you can use the Internet. My air purifier is offline. swiping down on the screen. working. then tap Delete. Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by Make sure your router is connected to the internet and your phones network connection is Delete the offline air purifier from the VeSync app. Swipe left (iOS) or tap and hold (Android), Reconfigure the air purifier with the VeSync app. Note: Power outages, internet outages, or changing WiFi routers may cause the air purifier to go offline. If your problem is not listed, please contact Customer Support (see page 19). 16 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 16 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 16 6/23/20 3:33 PM 6/23/20 3:33 PM F C C S TAT E M E N T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 17 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 17 6/23/20 3:33 PM 6/23/20 3:33 PM 17 WA R R A N T Y I N F O R M AT I O N Arovast will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty. This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty. This warranty does not extend to products purchased from unauthorized sellers. Arovasts warranty extends only to products purchased from authorized sellers that are subject to Arovasts quality controls and have agreed to follow its quality controls. All implied warranties are limited to the period of this limited warranty. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If you discover that your product is defective within the specified warranty period, please contact Customer Support via support@levoit.com. DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID. Extend Your Warranty by 1 Year Register your product within 14 days of purchase at www.levoit.com/warranty to extend your 1-year warranty by an additional year. This warranty is made by:
Arovast Corporation 1202 N. Miller St. Suite A Anaheim, CA 93806 Product Name Smart True HEPA Air Purifier Model Core 200S Default Warranty Period 1 year For your own reference, we strongly recommend that you record your order ID and date of purchase. Date of Purchase Order ID Terms & Policy Arovast Corporation (Arovast) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of one year from the date of original purchase. Arovast agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase. There is no other express warranty. This warranty does not apply:
There is no other express warranty. This warranty does not apply:
If the product has been modified from its original condition;
If the product has not been used in accordance with directions and instructions in the user manual;
To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Arovast;
To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
To damages or defects exceeding the cost of the product. 18 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 18 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 18 6/23/20 3:33 PM 6/23/20 3:33 PM C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@levoit.com Toll-Free: (888) 726-8520 Support Hours MonFri, 9:00 am5:00 pm PST/PDT
*Please have your order invoice and order ID ready before contacting Customer Support. Trademark Information Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google and Google Play are trademarks of Google LLC. Apple App Store is a trademark of Apple Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance. 19 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 19 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 19 6/23/20 3:33 PM 6/23/20 3:33 PM
/LEVOITLIFESTYLE
/LEVOIT
/LEVOIT
/LEVOIT LEVOIT.COM A2-01.02_D_20G08 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 20 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.indd 20 6/23/20 3:33 PM 6/23/20 3:33 PM