IMPORTANT SAFETY INSTRUCTIONS Before you install or use the apparatus, you must read and understand these Important Safety Instructions. At all times when using the apparatus you must follow these Important Safety Instructions to reduce the risk of fire, electrical shock and injury to persons. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 504-3395200 Any problems? Consult the Solving Problems table overleaf. not be responsible for any damage. surface to which you are attaching the fastener, as your cable company will fasteners. However, be careful that the adhesive doesnt damage the You may want to secure your digital adapter with the enclosed adhesive Remember, you will need access to a working wall AC power outlet. Follow the instructions overleaf to install your digital adapter correctly. information. adapter, observing the ventilation requirements set out in the safety Before connecting any cables, choose a suitable position for your digital definition Connection diagram overleaf).
- For SD viewing, use an coaxial RF cable (refer to the Standard-
Connection diagram overleaf).
- For HD viewing, use the HDMI cable (refer to the High-definition required) or standard-definition (SD). adapter can be operated in high-definition (HD - an HD service is Choose the right connection setup for your equipment. Your digital
(see About your Digital Adapter). Familiarize yourself with the front and rear panels of your digital adapter Check you have all the things you need (see Whats in the box?). Read all the safety information in this guide. BEFORE YOU BEGIN D417-QSG-Iss1.indd 1 DC60Xu High-definition Digital Transport Adapter Quick Start Guide BRINGING TECHNOLOGY HOME www.pace.com digital adapter with relative ease. By following the instructions in this guide, you will be able to install your digital adapter. Televisions that already have a digital cable box installed do not require a connected but does not have a digital cable box. You should connect your digital adapter to any television that has cable service picture quality. and high-definition (HD) format, which improves both the overall sound and Your new Pace digital adapter allows you to receive your channels in full digital Transport Adapter Introducing the Pace High-definition Digital WELCOME SAFETY INFORMATION To ensure you use this product safely, please read all the safety information included in this document. This digital adapter has been manufactured and tested with your safety in mind. However, improper use can result in potential electric shock or fire hazards. To avoid defeating the safeguards that have been built into your digital adapter, please observe the precautions discussed in this document. The model number and serial number of your digital adapter are on a label on its base. OTHER WARNINGS Do not remove the cover of your digital adapter. There are no user-serviceable parts inside it. Do not perform any servicing unless you are qualified to do so. Refer all servicing to qualified service personnel. Servicing your digital adapter yourself will invalidate the warranty. On the rear panel of your digital adapter there is a tamper-evident label that states Warranty void if broken or removed. To reduce the risk of fire or electric shock, do not expose your digital adapter to rain or moisture. To avoid possible damage to your digital adapter or to a connected TV or component, all AC power cords must be plugged into properly wired outlets. As with all electrical products, connection to faulty or defective components, or the failure to connect your digital adapter to a properly wired outlet, may cause sparking, property damage or damage to any TV or other component connected to your digital adapter and pose a fire hazard. Risk of fire or scorching Never place naked flame sources, such as lighted candles, on or adjacent to your digital adapter. Ambient temperature The operating temperature range of your digital adapter is 32-104F. If the ambient temperature around your digital adapter falls outside this range, you must correct this in order for your digital adapter to work correctly and safely. For example, if the temperature is too high, switch on the air conditioning. Ventilation Slots and openings in the casing of your digital adapter are provided for ventilation, to ensure reliable operation of your digital adapter and to protect it from overheating. Never block the ventilation openings by placing your digital adapter on a bed, sofa, rug or other similar surface. Never cover the ventilation openings with items such as newspapers, tablecloths or curtains. CAUTION Do not attempt to modify your digital adapter without written authorization from the manufacturer. Unauthorized modification could void your authority to operate your digital adapter. Failure to heed the Safety Information provided by failing to connect to a properly wired outlet may void the manufacturers warranty. SAVE THIS INFORMATION FOR FUTURE REFERENCE are trademarks and/or registered trademarks of Pace plc. Copyright 2012 Pace plc. All rights reserved. Pace and States and other countries. trademarks or registered trademarks of HDMI Licensing LLC in the United HDMI, the HDMI Logo, and High-Definition Multimedia Interface are double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Dolby and the 3701 FAU Boulevard, Suite 200, Boca Raton, Florida 33431 U.S.A. Pace Americas Inc. Service address Adresse du service dentretien instructions importantes dans la documentation accompagnant votre botier dcodeur. Le point dexclamation dans un triangle a pour but dattirer votre attention sur des choc lectrique pour les personnes. dalimentation, tensions qui pourraient tre suffisantes pour prsenter un risque de la prsence de tensions dangereuses non isoles lintrieur du chssis du bloc Le symbole reprsentant un clair dans un triangle a pour but de vous avertir de RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Avertissements affichs sur le bloc dalimentation important instructions in the literature accompanying your digital adapter. The exclamation point within a triangle is intended to alert you to the presence of that may be of sufficient magnitude to constitute a risk of electric shock to persons. presence of uninsulated dangerous voltages within the power supply units enclosure The lightning flash with arrowhead symbol, within a triangle, is intended to alert you to the RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Warnings on the power supply unit REGULATORY INFORMATION NOTE Your digital adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Your digital adapter generates, uses and can radiate radio-
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If your digital adapter does cause harmful interference to radio or television reception, which can be determined by turning your digital adapter off and on, you are encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between your digital adapter and the receiver. CONNECTING TO THE AC POWER SUPPLY You must not plug your digital adapter into the power supply until you have connected your digital adapter to the other equipment in your system. Your digital adapter itself is designed for use only with the supplied power supply unit. On the power supply unit there is a label that specifies the correct AC power supply input for it. Do not connect the power supply unit to any supply other than this. Always connect the 5 volt DC cord from the power supply unit to your digital adapter before you insert the power supply unit into the wall AC outlet. To disconnect power from your digital adapter, always remove the power supply unit from the wall AC outlet (i.e. not by removing the 5 volt cord from your digital adapter). Therefore you must install your digital adapter near to the wall AC outlet, which should be easily accessible. If you are in any doubt about the power supply lead, its plug or its connection, consult a qualified electrician. Connect your digital adapter to an outlet on a circuit different from that to which the receiver is connected. Consult your dealer or an experienced radio/TV technician for help. pluie ou lhumidit; lappareil ne fonctionne pas adquatement ou il est tomb. renvers ou des objets sont tombs dans lappareil; lappareil a t expos la le cordon dalimentation sont endommags; du liquide a t Un entretien est essentiel dans les cas suivants : la fiche ou 14. Confier toute rparation du personnel dentretien comptent. lappareil nest pas utilize pendant une longue priode. 13. Dbrancher lappareil pendant les orages lectriques ou lorsque de ne pas la faire basculer. dun chariot, faire preuve de prudence pour transporter lunit chariot/appareil afin support recommand par le fabricant, ou vendu avec lappareil. Lors de lutilisation 12. Utiliser uniquement lappareil avec un chariot, un pied, un trpied, une table ou un 11. Utiliser uniquement les fixations et accessoires recommands par le fabricant. niveau de la fiche, de la prise lectrique ainsi quau point de sortie du fil de lappareil. 10. Sassurer que le cordon dalimentation ne sera ni pitin ni cras, particulirement au murale, sadresser un lectricien pour faire remplacer la prise murale. assurer la scurit. Si la fiche de lappareil ne convient pas la prise lectrique broche de mise la terre. La broche plus large et la troisime broche sont destines large que lautre. Une fiche avec mise la terre est pourvue de deux lames et dune mise la terre. Une fiche polarise est pourvue de deux broches; lune tant plus 9. Ne pas contourner le dispositif de scurit de la fiche polarise ou de la fiche avec chaleur (y compris les amplificateurs). radiateur, registre de chaleur, cuisinire ou autre appareil produisant de la 8. Ne pas installer lappareil proximit dune source de chaleur telle que suivant les recommandations du fabricant. 7. Ne pas obstruer les ouvertures daration de lappareil. Installer lappareil 6. Nettoyer uniquement avec un chiffon sec. 5. Ne pas utiliser cet appareil prs de leau. 4. Observer toutes les instructions. 3. Observer tous les avertissements. 2. Conserver les instructions. 1. Lire les instructions. choc lectrique et de blessures. observes lors de lutilisation de lappareil afin de rduire les risques dincendie, de les instructions concernant la scurit. Ces instructions doivent en tout temps tre Avant dinstaller et dutiliser cet appareil, il est important de lire et de comprendre INSTRUCTIONS IMPORTANTES SUR LA SCURIT 31/01/2012 14:45 WHATS IN THE BOX?
ABOUT YOUR DIGITAL ADAPTER Front Panel S POWER LED Lights when your digital adapter is fully on Digital Adapter
(exact model may differ slightly from that shown) Adhesive Fasteners HIGH-DEFINITION CONNECTION 1. Connect the supplied coxial RF cable from the cable service to the connector marked CABLE IN on your digital adapter, as shown below. 2. Connect the supplied HMDI cable between the HDMI connector on your digital adapter and the HDMI connector on your HDTV. STANDARD-DEFINITION CONNECTION 1. Connect the supplied coxial RF cable from the cable service to the connector marked CABLE IN on your digital adapter, as shown below. 2. Connect another coxial RF cable between the TO TV connector on your digital adapter and the ANTENNA IN/RF IN connector on your SDTV. Power DC60Xu HD 3. Connect the external power supply unit (supplied) to the connector marked POWER on your digital adapter. 3. Connect the external power supply unit (supplied) to the connector marked POWER on your digital adapter. 4. After you have made the connections between your digital adapter and your HDTV, connect your HDTV and the external power supply unit to the AC power supply. 4. After you have made the connections between your digital adapter and your SDTV, connect your SDTV and the external power supply unit to the AC power supply. TV POWER CABLE GUIDE MENU HDMI Cable INFO EXIT PAGE MUTE LAST 2 5 8 0 3 6 9 L A NG 1 4 7 AA Batteries
(for your remote control) Rear Panel Coaxial RF Cable CABLE IN From cable service provider TO TV RF output to the TV HDMI Video and audio output for digital HDTV HDTV Supplied HDMI cable To the wall AC outlet 5. Make sure your TV is tuned to channel 3, and set the switch on the back of your digital adapter to channel 3. Note: Some parts of the country use channel 4. If you do not have a picture, you may need to switch both your TV and digital adapter to channel 4. Digital Adapter Digital Adapter RF cable CABLE IN RF IN SDTV To the wall AC outlet Remote Control
(exact model may differ slightly from that shown) External 5V Power Supply Unit PLACING YOUR DIGITAL ADAPTER After you have made the connections between the cable service, your digital adapter and your TV, place your digital adapter in a suitable location, observing the ventilation requirements set out in the safety information overleaf. Make sure there is nothing blocking the path from your remote control to the digital adapters front panel. You can pair the remote control and digital adapter. This enables the remote control to operate the digital adapter if the digital adapter is hidden from view. For more information, consult the instructions supplied with your remote control. You can place your digital adapter below or beside your TV. Once the remote control and digital adapter are paired, you can use the adhesive fasteners
(supplied) to attach your digital adapter to the side or back of your TV. D417-QSG-Iss1.indd 2 Power DC60Xu HD CABLE IN RF IN CABLE SERVICE CHANNEL 3/4 Switch for tuning your digital adapter (if required) POWER INPUT Make this connection last of all Supplied RF cable From your cable service Supplied RF cable From your cable service Set this switch to Channel 3 USING YOUR REMOTE CONTROL Place the batteries (supplied) into your remote control. After you install your digital adapter, the only way to change channels is with the supplied remote control. If you need further help, for example to program the remote control to operate your TV, refer to the instructions supplied with the remote control. ENJOY DIGITAL TV!
Following Installation If you have followed the steps and have picture and sound, congratulations, you have successfully installed your Pace high-
definition digital adapter. If you are experiencing problems, please consult the Solving Problems guide located to the right. Note: If your digital adapter requires activation, contact your cable company. Enjoy viewing all of your favorite TV shows, movies and sports games with digital picture and sound. SOLVING PROBLEMS If the installed system does not seem to be working properly, first make sure that all the cables are securely connected, then carry out the following checks, in the order shown. Problem There is nothing illuminated on your digital adapters front panel. The remote control does not operate your digital adapter. There is no picture on your TV screen. There are black bars on the sides of your TV screen. Suggested solution Power may not be reaching your digital adapter. Make sure that the external power supply unit is properly plugged in. If there is a switch by the wall AC power outlet, switch it to ON. Check that nothing is blocking the path from your remote control to the front panel. Your TV and other equipment may not be turned on. Check that they are plugged into AC power outlets and turned on. If your TV and digital adaper are connected using a coaxial RF cable, make sure your TV and digital adapter are both set to the same channel (3 or 4). Check the screen settings on your TV (refer to the TV user guide to make sure it is in 16x9 mode). There is no sound. Check that any audio cables between your TV and any attached audio equipment are securely and correctly connected. If you are still having problems contact your cable company. Further checks, if there is still a problem Check that the wall AC power outlet is working (for example by plugging in a lamp). Check that your remote control is currently set to operate your digital adapter (consult the instructions supplied with your remote control). If your remote control will still not operate your digital adapter, replace the batteries in your remote control. Check that you have selected the appropriate video input on your TV. If the video path between your digital adapter and your TV loops through other equipment (such as a VCR) you may need to turn on this equipment. If your TV and digital adaper are connected using a coaxial RF cable, try switching your TV and digital adapter to the other channel (3 or 4). If you do not subscribe to an HD service, you will not be able to view HD channels and may see the black bars on the sides of your TV screen, indicating that the picture is in standard-definition. Check that the program is transmitted in HD. Check that you have not muted the sound on your TV and/or any attached audio equipment. Adjust the volume control on your TV. If you can hear only mono sound, first check that the program is likely to have stereo sound (an old movie, for example, may not be in stereo). 31/01/2012 14:45