FCC ID: PGR-NVG5XDBAX Wi-Fi Module

MPE/SAR/RF exposure information This device was verified for RF exposure and found to comply with Council Recommendation 1999/519/EC and FCC OET-65 RF exposure requirements. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. WARNING: While this device is in operation, a separation distance of at least 30 cm

(12 inches) must be maintained between the radiating antenna inside the EUT and the bodies of all persons exposed to the transmitter to meet the FCC RF exposure guidelines. Making changes to the antenna or the device is not permitted. Doing so may result in the installed system exceeding RF exposure requirements. This device must not be co-

located or operated in conjunction with any other antenna or radio transmitter. Cet appareil rpond aux directives dexposition RF 1999/519/EC et FCC OET-65 sur la limitation dexposition du public gnral aux champs lectromagntiques. MISE AN GARDE: Pour satisfaire aux exigences de la FCC et IC concernant lexposition aux radiofrquences, une sparation de 30 cm ou plus doit tre maintenue entre cet appareil et des personnes lors de fonctionnement du dispositif. Pour assurer la conformit, des oprations au plus prs que cette distance nest pas recommande. Lantenne utilise pour cet metteur ne doit pas tre co-localise ou fonctionner conjointement avec une autre antenne ou transmetteur. Safety information The following sections describe the safety guidelines for this product. AC adapter This product is intended to be supplied with a listed ARRIS desktop AC adapter marked Class 2 or LPS and rated 100 120V, 50/60Hz 1A, Output 12V, 3.75A for all NVG5X8 series gateway models. The AC power adapter supplied with this product is designed to ensure your personal safety and to be compatible with this equipment. Use only the power adapter that was provided with the gateway. Please follow these guidelines:

Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet. Allow adequate ventilation around the adapter. Avoid locations with restricted airflow. Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging. Adaptateur secteur Cet appareil est destin tre aliment par une source dalimentation directe fournie par ARRIS ou 2Wire, de Classe 2 ou marque LPS , et avec un courant de sortie de 100 120V, 50/60Hz 3.75A pour tous les modles NVG5X8. Le bloc dalimentation secteur fourni avec ce produit a t conu pour garantir votre scurit et tre compatible avec cet appareil. Veuillez suivre les consignes suivantes:

Nutilisez pas ladaptateur secteur dans un environnement hautement humide. Ne touchez jamais ladaptateur secteur si vos pieds ou mains sont humides. Laissez une ventilation adquate autour de ladaptateur secteur. Evitez les endroits o la circulation de lair est insuffisante. Branchez ladaptateur secteur sur une prise respectant les spcifications sur la tension et la mise la terre se trouvant sur la coque et/ou lemballage du produit. Telecommunication cord Caution: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. Cordon tlphonique Attention: Afin de rduire le risque dincendie, nutilisez quun cordon tlphonique de calibre 26 AWG ou suprieur list UL ou certifi CSA. Internal telephone ports (VoIP) Telecommunication equipment connected to this port (e.g.,via Phone Lines 1 &

2 port) should be UL Listed and the connections shall be made in accordance with Article 800 of the NEC. Port tlphonique (VoIP) Tout quipement de tlcommunication tlphonique connect ce port doit tre list UL et les branchements doivent tre fait conformment aux dispositions de lArticle 800 du Code national de llectricit (NEC). Repairs Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local ARRIS distributor or service provider for assistance. Failure to comply may void the product warranty. Rparations Nessayez en aucun cas deffectuer des rparations, des ajustements ou des rparations sur cet quipement. Contactez plutt votre distributeur ou fournisseur de services ARRIS local pour obtenir de laide. Le non-respect de cette consigne peut annuler la garantie du produit. Location - electrical considerations CAUTION: Due to risk of electrical shock or damage, do not use this product near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, high-

frequency or magnetic security devices, or electric motors). Emplacement Considration lectriques AVERTISSEMENT: Pour viter un risque de choc lectrique, nutilisez pas cet appareil proximit dune source deau, par exemple prs dune baignoire, un lavabo, une machine laver, dans un garage humide ou prs dune piscine. Evitez aussi dutiliser cet appareil durant un orage. Evitez de brancher cet appareil proximit dappareils lectriques pouvant causer de large fluctuations de tension ou mettant du bruit lectrique (tel que climatiseurs, enseignes au non, dispositifs de scurit magntique ou de haute-frquence, ou moteurs lectriques). Location - environmental considerations Do not plug the power adapter into an outdoor outlet or operate the residential gateway outdoors. It is not waterproof or dustproof, and is for indoor use only. Any damage to the unit from exposure to rain or dust may void your warranty. Do not use the residential gateway where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the gateway away from direct sunlight and anything that radiates heat, such as a stove or a motor. Do not use the adapter if the cord becomes damaged. Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. Lieu - considrations environnementales Ne branchez pas ladaptateur secteur sur une prise extrieure et nutilisez pas la passerelle rsidentielle lextrieur. Il nest pas tanche leau ou la poussire, et est pour une utilisation lintrieur seulement. Tout dommage lappareil rsultant dune exposition la pluie ou la poussire peut annuler votre garantie. Nutilisez pas la passerelle rsidentielle dans des endroits o la chaleur, la poussire, lhumidit, des produits chimiques ou des huiles sont caustiques. Gardez la passerelle labri de la lumire directe du soleil et de tout ce qui dgage de la chaleur, tel quun pole ou un moteur. Nutilisez pas ladaptateur si le cordon est endommag. Nessayez pas de rparer ladaptateur. Il ny a aucune pice rparable lintrieur. Remplacez lappareil sil est endommag ou expos un excs dhumidit. Class 1M Laser Product DANGER: Viewing the laser output with certain optical instruments (e.g. eye loupes, magnifiers and microscopes) within a distance of 100 mm may pose an eye hazard. DANGER: Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER: There must be a proper termination of all active fibers in the network. IEC 60825-1:2014 - Safety of laser products - Equipment classification and requirements EN 60825-1:2014 - Safety of laser products - Equipment classification and requirements IEC 60825-2:2004+A1+A2 - Safety of laser products - Safety of OFCS EN 60825-2:2004+A1+A2 - Safety of laser products - Safety of OFCS Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Produit laser de classe 1M DANGER: La visualisation de la sortie laser avec certains instruments optiques (loupes, loupes et microscopes, par exemple) une distance de 100 mm peut prsenter un risque pour les yeux. DANGER: Lutilisation de commandes ou de rglages, ou lexcution de procdures autres que celles spcifies dans le prsent document peut entraner une exposition un rayonnement dangereux. DANGER: toutes les fibres actives du rseau doivent tre correctement termines IEC 60825-1: 2014 - Scurit des produits laser - Classification et exigences de lquipement EN 60825-1: 2014 - Scurit des produits laser - Classification et exigences de lquipement IEC 60825-2: 2004 + A1 + A2 - Scurit des produits laser - Scurit des systmes OFCS EN 60825-2: 2004 + A1 + A2 - Scurit des produits laser - Scurit des systmes OFCS Conforme aux normes 21 CFR 1040.10 et 1040.11 lexception des dviations par rapport lavis laser No 50, dat du 24 juin 2007. Trade Name Responsible Party Address ARRIS ARRIS International plc. 3871 Lakefield Drive, Suwanee, GA 30024, United States Phone 1-866 362-7747 CBRS Part 96.35 General authorized access use.

(a) General Authorized Access Users shall be permitted to use frequencies assigned to PALs when such frequencies are not in use, as determined by the SAS, consistent with 96.25(c).

(b) Frequencies that are available for General Authorized Access Use shall be made available on a shared basis.

(c) General Authorized Access Users shall have no expectation of interference protection from other General Authorized Access Users operating in accordance with this part.

(d) General Authorized Access Users must not cause harmful interference to and must accept interference from Priority Access Licensees and Incumbent Users in accordance with this part.

(e) General Authorized Access Users operating Category B CBSDs must make every effort to cooperate in the selection and use of available frequencies provided by an SAS to minimize the potential for interference and make the most effective use of the authorized facilities. Such users shall coordinate with an SAS before seeking station authorization, and make every effort to ensure that their CBSDs operate at a location, and with technical parameters, that will minimize the potential to cause and receive interference among CBSDs. Operators of CBSDs suffering from or causing harmful interference are expected to cooperate and resolve interference problems through technological solutions or by other mutually satisfactory arrangements. NVG5X8 Gateway Quick Start Guide Introduction Use this Quick Start Guide to install, configure, and perform basic troubleshooting for the NVG558 and NVG578S gateways. Power supply installation Connect the power supply cord to the Power In connector on the gate-

way and the other end into an appropriate electrical outlet. Product ventilation The gateway is intended for residential use. Position the gateway in a vertical position and where tem-

perature remains within a range of 32 104F(0 40C) and heat from the unit itself is not trapped. There must be at least two inches (2) of clearance on all sides except the bottom. 5cm/2 5cm/2 5cm/2 Inserting your SIM card Before inserting a SIM card into the gateway, ensure the SIM card is flat &

the central part of the card is present and securely attached to the SIM frame. Never insert a SIM card frame into the unit without the central SIM card present and securely attached to the outer SIM frame. Doing so will lock the SIM frame inside the unit preventing its removal. Gateway positioning, status indicator lights and port configuration Proper positioning of the gateway is essential for proper cooling. Colored LEDs on the gateway indicate the status of various port activity. Front panel Gateway positioning Power Broadband WAN Ethernet Wi-Fi Voice Position the gateway in a vertical position. NVG558 NVG578S Phone sockets USB port Broadband port LAN Ethernet ports with LED support Reset button LTE connectors Power button Power In Phone sockets LAN Ethernet ports with LED support WAN/LAN switch USB port SFP+ port Fiber port Reset button Power In Power button LED descriptions LED Power Broadband WAN Wi-Fi Voice Solid Green: The device is powered on. Flashing Green: The device is starting. Solid Red: Boot failure. Flashing Red: Detecting factory reset (press and hold the recessed Reset button for 10 or more seconds to trigger the factory reset). Status Solid Blue: Broadband internet connection is active. Solid Red: No IP address or authentication failed. Off: No active broadband connection. NVG578S/NVG558 (with Ethernet WAN interface) Solid Green: Ethernet WAN connection is good. Flashing Green: Trying to connect to the available network. Solid Red: No Ethernet WAN connection on the line. NVG558 (with Cellular WAN interface) Solid Green: Cellular WAN connection is good. Solid Yellow: Cellular WAN connection is fair. Solid Red: Cellular WAN connection is poor. Flashing Red: No cellular WAN connection on the line. Solid Green: Wireless enabled (either radio). Flashing Yellow: Wi-Fi protected Set-up (WPS) is active. Flashing Red: Flashes for 30 seconds to indicate the timeout or conflict of WPS. Solid Red: Wireless network failure. Off: Wireless is disabled for both the radios. Solid Green: All voice lines are registered and active. Flashing Green: A voice line is ringing or off-hook. Solid Yellow: Both lines of a two line system are provisioned with one unregistered. Flashing Yellow: Both lines of a two line system are provisioned with one registered and ringing or off hook and the other one unregistered. Solid Red: All provision voice lines are provisioned but not SIP registered. Off: VoIP is not provisioned or the gateway is turned off. 616227-001-00 09/2019 LAN/WAN Ethernet LEDS on rear panel RJ-45 ports Solid Green: Port is active. Off: Port is not active. Flashing Green: Traffic is passing on the line. Powering and initial cabling Press the Power button on the back of the gateway. The Power indicator will initially flash GREEN to indicate that the gateway is booting and then solid GREEN to indicate it is operational. Under normal operation, while the gateway is powering up, LED status is as follows:

Broadband, WAN Ethernet, Wi-Fi and and Voice indicators will be off. Broadband indicator will initially be solid RED, and upon Ethernet link, it will light solid BLUE. Phone indicator will light solid GREEN after the Broadband indicator lights BLUE to indicate that digital phone service is active. Wireless indicator will light solid GREEN to indicate that the Wireless service is enabled. NOTE: During the initial setup, it may take several minutes to achieve service connectivity. Broadband: Follow instructions provided by your Service Provider. If no instructions are provided, then call your Service Provider. Digital Phone Service: To connect the gateway to a digital phone line:

1. Connect the supplied RJ-11 terminated phone cable to the Phone port on the back of the gateway. 1. Connect the supplied RJ-45 terminated Ethernet cable to one of the Ethernet ports on the back of the gateway. 2. Connect the phone cable to a phone or fax machine. LAN Ethernet: To make an Ethernet connection:

2. Connect the Ethernet cable to the Ethernet port on a local computer. USB port: To connect the gateway to the USB port:

1. Connect the USB cable to the USB port on the back of the gateway. 2. Connect the other end of the USB cable to your device. Access the Web Management Interface 1. Open a web browser, such as Firefox, Chrome, or Microsoft Internet Explorer, from the computer connected to the gateway. 2. Type the following address in the address bar of the browser to open the Access Code Required Screen:

http://192.168.1.254 NOTE: Select the appropriate language button in the lower right corner of the Access Code Required screen to continue with the selected language. 1. Provide the Device Access Code, a unique code printed on a label on the base of the gateway. 2. Select Continue. To access the Web Management configuration pages:

NOTE: The terms Device Access Code and Password are sometimes used interchangeably. Add a wireless device to the gateway On the wireless device, use the Wireless setup option to find the available wireless network names. The Wi-Fi Network Name for the gateway is printed on NOTE: The main page provides an overview about the connection and home network status. You can also access information for the following:

Access Code Required Page the bottom of the label along with the Wi-Fi password. Home: Network Status/Configuration System: System status, upgrade, restart and factory reset options Broadband: WAN status, statistics, and parameter settings Wi-Fi: Wi-Fi status and configuration Voice: Voice status and QoS configuration Home Network: LAN status and configuration Firewall: Firewall status/configuration Diagnostics: Gateway connection and application diagnostics Image: Home page NOTE: This is a reference image and may slightly differ based on your device. Declaration of conformity The following sections describe regulatory compliance by region. FCC/ISED compliance This device has been tested and certified as compliant with the regulations and guidelines set forth in the Federal Communication Commission - FCC Title 47 Part 15 and the Innovation Science and Economic Development (ISED) Canada CAN ICES-3 (B)/NMB-3(B) and RSS-247 Radio and Telecommunication regulatory requirements. Cet appareil a t test et certifi conforme aux rglementations et directives dfinies dans les exigences rglementaires CAN CAN ICES-3 (B) / NMB-3 (B) et RSS-247 dInnovation et Canada (ISED). Manufacturer: ARRIS Models: NVG5x8 Product Family Part 15 of FCC rules This device complies with part 15 of the FCC Rules and Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux normes CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. lappareil ne doit pas produire de brouillage, et 2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Users should be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5470-5725 MHz and that these radars could cause interference and/or damage to the LE-LAN device. Les utilisateurs doivent tre aviss que les radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5470- 5725 MHz et que ces radars peuvent causer du brouillage et/ou des dommages aux dispositifs LAN-EL. The device for operation in the band 5150-5250MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate this equipment. This radio transmitter 3439B-NGV5XDBAX has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Cet metteur radio 3439B- NGV5XDBAX a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types dantenne numrs ci-dessous, avec le gain maximal autoris indiqu. Les types dantenne non inclus dans cette liste et dont le gain est suprieur au gain maximal indiqu pour lun des types rpertoris ne sont strictement pas autoriss pour une utilisation avec cet appareil.

ARRIS NVG5X8AX 2.4GHz / 5GHz 802.11 WiFi module Factory Installation guide Product Summary The NVG5X8AX module is a cost eecve PCIe 2.4 / 5 GHz 802.11ax WiFi module designed to be incorporated into ARRIS NVG5x8 product line on behalf of or by ARRIS, and is not for sale or distribuon as a standalone module. This Module incorporates two Broadcom BCM43684 SoC 4x4 designs which is capable of supporng 802.11b/g/n/ac/ax modes. The modules ulises the Skyworks SKY85331-11 & SKY85743-21 Low noise Ampliers and is designed for use in the USA and Canada. The host system using this module, is required to have a label in a visible area indicated with the following text: "Contains FCC ID: PGR-

NVG5XDBAX & IC: 3439B-NVG5XDBAX Refer to ARRIS FINAL ASSEMBLY,NVG578, GPON,10G,11AC DUALBAND, WIRELESS VOICE GATEWAY Drawing Number 613441 (shown below) FCC Warning: Changes or modicaons to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operaon. This device has been FCC cered as a module limited to installaons into and intended solely for use in ARRIS products. ARRIS will retain control over the nal installaon of the device, such that compliance in nal products is assured. MPE/RF Exposure Informaon: The manual for the end product should cauon the user to maintain a minimum distance of 30 cm between the radiator and their body and not operate the product next to other products with RF transmiers

ART FILM - Topsilk FD4 FD2 J29 MT4 J28 J27 J26 MT5 C1085 C1904 C 1 9 5 7 C1993 1 5 U C 1 8 6 6 3 9 L C1035 3 3 0 1 C C 1 0 3 4 L 1 6 7 R382 C1014 2 1 0 1 C 5 0 3 1 C 5 1 0 1 C C 1 0 1 7 6 1 0 1 C C 1 0 1 8 5 6 8 1 C 1 8 3 R 9 4 3 1 C C1998 C 1 9 5 8 4 1 6 1 C C1598 C 1 5 9 7 C 1 3 4 8 C 1 4 1 9 R380 R 4 8 6 R487 C1024 5 7 1 L 7 6 8 1 C C 1 6 0 6 C1605 FL44 FL43 FL42 FL41 C1994 C1992 C1990 C1988 C1083 C1898 C 1 9 5 5 C1991 0 5 U C 1 8 6 3 2 6 8 1 C 4 7 1 L 4 6 8 1 C C 1 6 0 4 9 8 L C1007 5 0 0 1 C C 1 0 0 6 R373 1 9 9 C C1308 L 1 6 6 0 1 3 1 C C 1 3 0 6 9 0 3 1 C 1 1 3 1 C C 1 3 0 7 2 7 3 R 2 8 3 1 C 3 1 6 1 C C1596 C 1 5 9 5 C1997 C 1 9 5 6 C 1 3 8 1 C 1 4 2 1 R371 R 4 8 8 R489 C1420 C1081 C1886 C 1 9 5 3 C1989 C 1 3 8 3 C 1 4 2 3 R362 R 4 9 0 R491 C1422 9 4 U C 1 8 6 0 9 5 8 1 C 3 6 3 R 4 8 3 1 C C1996 C 1 9 5 4 2 1 6 1 C C1594 C 1 5 9 3 3 7 1 L 1 6 8 1 C C 1 6 0 2 5 8 L C979 7 7 9 C R364 5 6 9 C C1314 5 1 3 1 C 6 1 3 1 C C 1 3 1 2 7 1 3 1 C C 1 3 1 3 C935 C1880 C 1 9 5 2 C1987 1 1 6 1 C C 1 3 8 5 C 1 4 2 5 R353 R 4 9 2 R493 C1424 C 1 8 5 7 8 4 U 6 5 8 1 C 4 5 3 R 6 8 3 1 C C1995 C 1 9 5 1 C1592 C 1 5 9 1 1 8 L C951 9 4 9 C R355 C1320 7 3 9 C 1 2 3 1 C 2 2 3 1 C C 1 3 1 8 3 2 3 1 C C 1 3 1 9 C 9 7 8 L 1 6 5 C 9 5 0 L 1 6 4 C1635 C1031 C1634 C1003 C1633 C975 C1632 C947 R387 R378 R369 R360 C1603 C1601 C1599 NVG5X8AX C227 C230 SH1 L97 T P 4 7 C 1 2 6 6 C 1 2 7 0 C 1 2 6 4 C 1 2 6 8 C 1 2 6 9 U56 C1267 R478 R477 C1265 R479 0 1 1 1 C 0 2 7 1 C C 1 1 0 8 C1667 C1111 L94 8 5 U R444 C1721 C1109 5 0 1 1 C 3 3 4 R 6 4 4 R 6 2 0 1 C C 1 3 6 0 2 5 3 1 C 5 2 0 1 C 0 9 L U2 8 5 3 1 C C 1 3 5 9 4 0 1 L C 1 3 6 4 2 6 3 1 C C 1 3 6 3 5 0 1 L C1356 C1355 4 5 3 1 C 3 0 1 L Y4 C1293 C1292 R348 R350 U47 1 3 3 R 1 5 3 R C917 R349 TP30 9 1 5 R 0 2 5 R 2 2 5 R 4 2 2 C 5 2 2 C 0 4 7 1 C C1741 L28 C1746 C1738 C1742 R126 1 8 3 C 2 2 1 R 4 2 1 R 9 2 8 1 C R 1 1 9 C 3 6 9 8 1 1 R L120 C1702 C1716 C1714 C1713 C371 C 3 7 7 C 3 7 9 C 3 7 8 L 3 3 1 1 7 1 C C 1 7 1 0 2 3 5 1 C R 6 4 1 6 0 7 1 C C1712 U60 R640 C1703 R 6 4 5 C 1 9 6 7 R541 C 1 7 0 4 C 1 5 3 0 C1709 R646 9 3 5 R R584 R536 R540 R537 C1529 R538 U52 C1736 R652 C1744 C1737 R651 C 1 7 4 3 5 3 7 1 C C1745 C1960 C1966 U27 1 6 9 1 C 7 4 7 1 C 9 3 7 1 C 0 5 6 R C370 C1666 7 2 6 1 C C318 C1823 C1826 C1822 C 1 8 2 5 C 1 8 2 4 C 1 8 2 7 C319 9 5 9 1 C

C 1 9 6 2 3 1 7 R C 1 6 2 9 C 1 6 6 4 C 1 6 2 8 4 6 9 1 C U 6 2 R 5 9 5 C1830 R596 C1625 R 5 9 7 C1631 R598 R599 C 1 6 6 2 C 3 8 8 U28 C 3 8 9 C 3 9 3 R 1 3 1 2 3 1 R C 1 8 3 1 R 1 2 9 R130 R 1 2 7 C387 L35 0 9 3 C C392 C391 R587 1 Q C1963 C1626 R714 C1630 R712 L121 C1252 C1256 C1250 C461 R 4 7 2 3 5 2 1 C 1 7 4 R C1251 R473 U54 L95 C1255 C1254 TP35 8 7 6 1 C C1523 C1676 C1677 R 6 3 0 5 8 6 1 C L119 C1679 C1681 C467 U59 R629 C1683 R 6 3 1 R534 C 1 6 8 4 C 1 5 2 1 C1686 R632 2 3 5 R R582 R529 R 5 3 3 C1520 R531 R530 R167 C 5 0 5 U33 R 1 6 8 R 1 7 1 8 2 5 R 7 2 5 R R187 R 1 8 5 Y2 C 1 2 9 7 6 9 2 1 C R 1 8 1 3 8 1 R R 1 8 4 6 8 1 R R525 5 7 1 R 4 7 1 R U3 C 6 0 2 C 1 4 6 7 C 6 0 3 C 6 0 1 C577 C1469 C 5 7 9 C 5 7 8 C553 C1471 C 5 5 5 C 5 5 4 9 2 5 C C 5 3 1 3 7 4 1 C C 5 3 0 R340 R341 1 2 5 R R523 R524 R526 C238 C242 P1 1 B C P 0 0

1 0 0

3 9 1 3 1 6 4 3 P T A l l r i g h t s r e s e r v e d

. 2 0 1 9 A R R I S E n t e r p r i s e s L L C

. 2 7 1 L 8 5 8 1 C C 1 6 0 0 9 5 4 1 C C 1 4 6 1 8 5 4 1 C 0 0 5 1 C 0 5 4 1 C C 1 4 5 1 4 6 5 C 8 9 4 1 C 4 4 4 1 C C 1 4 4 5 2 4 4 1 C 6 9 4 1 C 5 1 5 C C 5 2 0 6 1 5 C 4 9 4 1 C C 5 3 8 3 4 4 1 C C 5 1 4 7 1 5 C 6 0 1 1 C MT3 C 1 6 6 8 C 5 8 4 R 2 0 9 C 5 3 6 C 5 6 0 C 5 1 2 3 7 6 1 C R 2 0 2 2 1 1 1 C R 1 9 5 7 0 1 1 C R 1 8 8 5 8 5 C 1 6 5 C 7 3 5 C 3 1 5 C TP31 FL10 L 5 2 L 5 3 C593 C 5 9 4 0 2 6 C C 1 6 5 1 0 5 6 1 C C 1 6 4 9 R213 U37 8 8 5 C 5 6 4 1 C 3 6 4 1 C C 1 4 6 2 C 5 8 6 0 6 4 1 C 4 6 4 1 C R509 0 8 2 1 C 5 1 2 R R214 6 0 6 C C587 C600 FL40 C1755 C 2 0 0 5 L 1 3 4 6 0 0 2 C L 1 3 5 C1754 C597 8 1 6 1 C 5 9 5 C C1466 6 9 5 C C1653 C1652 R600 C1499 L132 L133 R508 FL39 FL38 C 2 0 0 3 C1753 L 1 3 0 L 1 3 1 C1752 7 1 6 1 C C572 C1468 0 7 5 C 1 7 5 C FL9 7 8 C 5 6 4 9 1 C C 1 6 4 7 8 4 6 1 C C 1 6 4 6 L 4 9 C573 R206 U36 1 8 2 1 C 8 0 2 R R207 2 8 5 C C565 C576 7 5 4 1 C 5 5 4 1 C C 1 4 5 2 6 6 5 C 3 5 4 1 C R507 C1655 C1654 R601 L129 L128 7 9 4 1 C 6 0 5 R FL37 C 1 6 4 0 C 1 6 4 2 C 1 6 4 1 9 8 C 5 4 4 7 1 C FL8 L 4 5 C546 R199 U35 0 4 5 C 9 4 4 1 C L 4 8 L 4 4 C1657 C1656 R602 5 9 4 1 C L124 L125 4 0 5 R FL35 4 0 0 2 C 2 0 0 2 C 4 5 4 1 C C 1 4 5 6 0 4 4 1 C C 1 4 3 9 6 4 4 1 C C 1 4 4 8 C 1 4 8 6 C 1 4 8 5 C 1 4 8 8 C 1 4 8 0 C 1 4 9 0 C 1 4 7 7 C 1 4 9 2 C 1 4 7 4 1 0 2 R R200 8 5 5 C C539 C552 7 4 4 1 C R505 FL36 C 2 0 0 1 C1751 L 1 2 6 L 1 2 7 C1750 C549 C1470 8 4 5 C 5 4 5 C 6 1 6 1 C C 1 0 6 2 R192 U34 9 1 5 C 1 4 4 1 C 4 9 1 R R193 4 3 5 C C518 C528 8 3 4 1 C R503 FL5 C 1 9 9 9 C1749 L 5 5 C1659 C1658 R603 3 9 4 1 C 2 0 5 R L122 L123 FL34 L 5 6 C1748 C525 C1472 3 2 5 C 4 2 5 C 5 1 6 1 C 0 0 0 2 C C 1 0 6 7 C 1 0 3 8 X A B D X 5 G V N

B 9 3 4 3

C I C 1 0 5 7 X A B D X 5 G V N

R G P

D I C C F J30 J34 J35 J36 0 8 9 1 C 9 7 9 1 C 1 8 9 1 C 8 7 9 1 C 4 8 9 1 C 2 7 9 1 C 1 7 9 1 C 3 7 9 1 C 0 7 9 1 C 4 7 9 1 C 9 6 9 1 C 5 7 9 1 C 8 6 9 1 C 6 7 9 1 C 3 8 9 1 C 7 7 9 1 C 2 8 9 1 C 6 8 9 1 C 5 8 9 1 C C 1 6 4 3 C 1 6 4 5 4 6 1 C 4 FL7 C 1 4 9 1 2 C 5 1 L 4 0 L 4 1 C522 S H 3 C1965 1 K L 5 L P T C I D L I U B T

F F

H BARCODE LABEL MT1 MT2 FD5 This drawing is not to be disclosed, in whole or part, to a TITLE: NVG5x8 WIFI third party without written permission from ARRIS Dual Band 11ax Card copyright 2019 ARRIS Enterprises LCC. All rights reserved NO AMENDMENTS TO ARTWORKS UNLESS AUTHORISED BY ARRIS ANY MANUFACTURING QUERIES PLEASE E-MAIL PCB@ARRIS.COM PCB PART REF: 613193-001-00 Date:11 Mar 2019 ARRIS International plc England BD18 3LF Victoria Road, Saltaire, Shipley, ARTWORK :

TOPSILK SCALE 1:1 Tel:(01274) 532000 Fax:(01274) 532010/537088 VIEWED FROM TOP (COMPONENT SIDE) ART FILM - Topsilk

Authority to Act as Agent April 24, 2020 National Technical Systems Silicon Valley TCB 41039 Boyce Road Fremont, CA. 94538 RE: Model NVG5X8AX 802.11ax 2.4 GHz and 5 GHz dual band radio module This is your letter of authorization to accept our appointment of National Technical Systems Silicon Valley as our Agent for ARRIS 2500 Walsh Ave., Santa Clara, CA 95051 USA, to sign applications before Federal Communications Commission (FCC) and to make representations to you on our behalf. National Technical Systems Silicon Valley is to receive and exchange data between our company and FCC. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by FCC still resides with ARRIS. I hereby certify that ARRIS is not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This authorization has no expiration and is valid until further written notice from ARRIS. Sincerely, Thomas Kelleher Sr. Product Compliance Engineer ARRIS 2500 Walsh Ave., Santa Clara, CA 95051 USA o: +1 215-323-2257 e: Thomas.kelleher@commscope.com

Date: May 5, 2020 To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046 From: Jorge Villarreal 101 Tournament Dr. Horsham, PA 19044 Reference: Grantee Code PGR Subject: Authorization To whom it may concern:

I hereby authorize Thomas Kelleher, Compliance Engineer of ARRIS, to act on behalf of ARRIS in all matters relating to the FCC application for equipment authorization in connection with FCC grantee code PGR, including signing of all documents relating to these matters. If you have any questions regarding this authorization, please dont hesitate to contact me. Sincerely yours,

Jorge Villarreal ARRIS Dir. Product Compliance Tel: 215-323-1697 E-mail: Jorge.Villarreal@commscope.com

Request for Confidentiality April 24, 2020 Subject: Confidentiality Request for PGR-NVG5XDBAX Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that the following part(s) of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ARRIS has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, Thomas Kelleher Sr. Product Compliance Engineer ARRIS 2500 Walsh Ave., Santa Clara, CA 95051 USA o: +1 215-323-2257 e: Thomas.kelleher@commscope.com

May 26, 2020 National Technical Systems TCB 41039 Boyce Road Fremont, CA, 94538 FCC ID: PGR-NVG5XDBAX IC: 3439B-NVG5XDBAX To whom it may concern:

The enclosed documents constitute a formal submittal and application for a Limited Modular Class III Permissive change for a Wi-Fi Module pursuant to the following rules:

Subpart E of Part 15 of FCC Rules (CFR 47), UNII Devices RSS-Gen Issue 5, April 2018, General Requirements for Compliance of Radio Apparatus RSS-247, Issue 2, February 2017, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices The software version associated with this application is 9.4. National Technical Systems, as duly authorized agent prepared this submittal. A copy of the letter of our appointment as agent is included with the application. If there are any questions or if further information is needed, please contact National Technical Systems for assistance. Sincerely, David W. Bare Chief Engineer dmg/DWB Page 1 of 1

June 22, 2020 FCC ID: PGR-NVG5XDBAX IC ID: 3439B-NVG5XDBAX Limited Module Approval Request To Whom It May Concern:

In accordance with FCC 47 CFR 15.212 (b) and ISED RSP-100, ARRIS hereby requests Limited Modular Approval for FCC ID PGR-NVG5XDBAX and IC ID 3439B-NVG5XDBAX. Specifically, the Limited Modular Approval criteria are addressed as follows:

FCC Checklist 1. The module has SPTE tin plated steel shields covering all critical RF components. This can be seen in the photographs included in the accompanying test report. 2. The modulation/data inputs are controlled via the PCIe interface by the Broadcom BCM43684 Wi-Fi compliant SoCs (U2 & U3) meeting all IEEE 802.11 modulation and PCIe data bus requirements. 3. The 40MHz RF reference oscillator is integrated in each Broadcom BCM43684 SoC contained within the module. The 5V/3.3V/1.2V power requirements are supplied by on-board regulation. 12 vdc is suppled from the host. 4. As described in the Description of Operation, this module employs 8 antenna U.FL miniature RF connectors: Four for the 2.4 GHz radio and four for the 5 GHz radio. The integrated antennas are a dipole design, which is, in essence, a balun fed dipole mounted on a common plastic carrier integrated into the enclosure and are not accessible by the end user. All integrated antennas used in the host device have been verified at the time of initial authorization. 5. This module is designed to be installed into an ARRIS host-based product. The test data contained in this application is for the device tested in a stand-alone configuration using a host board as a carrier sitting in a plastic housing to simulate the position of the antennas as they would be used in a typical end product. All other circuits not applicable to the operation of the module were disabled in this carrier. This module does not employ any ferrites to reduce unintended emissions. Radiated spurious emissions data and AC conducted emissions data demonstrating compliance with the requirements of Part 15 of the FCC rules for intentional radiators and RSS GEN/RSS 210 has been provided. 6. The module is marked with its own part number ID. The FCC and ISED IDs are marked on the module and are displayed on the ARRIS host label. The FCC and ISED label and location are outlined in the user manual. 7. The module has been tested to comply with all rules under Part 15. The compliance is assured by the design of the device. In this implementation the end user is unable to intervene to cause the device to operate incorrectly. These safeguards are outline in more detail in the Software Security requirements for U-NII devices attestation. 8. The module meets the requirements for a mobile device that may be used at separation distances of more than 20cm from the human body. Refer to the MPE calculation in the report and statements in the user manual. ISED Checklist

(a) The radio elements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield but must be on the module assembly.

(b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation.

(c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module.

(d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module.

(e) The module shall be tested for compliance with the applicable standard in a standalone configuration, i.e. the module must not be inside another device during testing.

(f) The module shall comply with the Category I equipment labelling requirements.

(g) The module shall comply with applicable RSS-102 exposure requirements, which are based on the intended use/configurations.

(h) Is the modular device for an Industry Canada licensed exempt service?

YES YES YES YES YES YES YES YES As noted above, this module complies the limited modular approval requirements in 47 CFR 15.212 and RSP-100. ARRIS ensures compliance through manufacturing of its end products and through professional installation and user manuals controlled by ARRIS and its customers (service providers). If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely, Thomas Kelleher Product Compliance Engineer ARRIS 101 Tournament Dr, Horsham, PA 19044 USA Tel: 215-323-2257 E-mail: thomas.kelleher@commscope.com

Permissive Change Request Date: April 24, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Class III Permissive Change FCC ID: PGR-NVG5XDBAX Original Grant Date: March 16, 2020 To Whom It May Concern:

Pursuant to CFR 2.1043, ARRIS hereby requests a Class III Permissive Change to add U-NII-2A and U-NII-

2C bands (5250~5350 MHz, 5470~5725 MHz) on the NVG5x8AX module (FCC ID: PGR-NVG5XDBAX). The above changes are enabled by Firmware programmed in the factory. There is not any software that can be modified by end-user. Previous firmware version: 9.x Updated firmware version: 9.4 If you should have any questions regarding this modification, please dont hesitate to contact us. Thank you!

Sincerely, Thomas Kelleher Sr. Product Compliance Engineer ARRIS 2500 Walsh Ave., Santa Clara, CA 95051 USA o: +1 215-323-2257 e: Thomas.kelleher@commscope.com