submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
Internal Photos | Internal Photos | 301.63 KiB | September 09 2020 | |||
|
External Photos | External Photos | 882.04 KiB | September 09 2020 | |||
|
ID Label/Location Info | ID Label/Location Info | 471.00 KiB | September 09 2020 | |||
|
Authorization Letter | Cover Letter(s) | 143.37 KiB | September 09 2020 | |||
|
C2PC Letter | Cover Letter(s) | 118.90 KiB | September 09 2020 | |||
|
Confidentiality Letter | Cover Letter(s) | 119.54 KiB | September 09 2020 | |||
Operational Description | Operational Description | September 09 2020 | confidential | ||||
|
Test Report | Test Report | 2.06 MiB | September 09 2020 | |||
|
Test Setup Photos | Test Setup Photos | 564.54 KiB | September 09 2020 | |||
|
Change in ID Letter | Cover Letter(s) | 123.17 KiB | December 23 2019 | |||
|
Declaration Letter | Cover Letter(s) | 141.73 KiB | December 23 2019 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-09-09 | 2412 ~ 2472 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2019-12-23 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Change in Identification |
4 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | ||
5 | 2412 ~ 2472 | DTS - Digital Transmission System |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2020-09-09
|
|||||
2019-12-23
|
||||||
Applicant's complete, legal business name |
ART S.P.A.
|
|||||
FCC Registration Number (FRN) |
0028774685
|
|||||
Physical Address |
Voc. Pischiello, 20
|
|||||
Passignano sul Trasimeno, N/A
|
||||||
Italy
|
||||||
TCB Information | ||||||
TCB Application Email Address |
g******@emcc.de
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
2AUGZ
|
|||||
Equipment Product Code |
TSU
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
F****** O********
|
|||||
Title |
CEO
|
|||||
Telephone Number |
+39 0********
|
|||||
Fax Number |
+39 0********
|
|||||
f******@artgroup-spa.com
|
||||||
Technical Contact | ||||||
n/a | ||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DTS - Digital Transmission System | |||||
NII - Unlicensed National Information Infrastructure TX | ||||||
DXX - Part 15 Low Power Communication Device Transmitter | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth & WiFi module | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Purpose / Application is for | Class II Permissive Change | |||||
Change in Identification | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes. This device also contains U-NII transmitter. C2PC application with change of the antenna path from the module to the connector and add additional external antenna as documented in this filing. This Class II Permissive change is to add a host: TSU (model: TSU; Brand: ART). | |||||
RF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR) and Bluetooth Low Energy (BLE) transmitters. C2PC application with change of the antenna path from the module to the connector and add additional external antenna as documented in this filing. This Class II Permissive change is to add a host: TSU (model: TSU; Brand: ART). | ||||||
RF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters. | ||||||
Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE), 2.4 GHz WLAN and U-NII transmitters. | ||||||
RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
TUV SUD Product Service GmbH
|
|||||
7layers GmbH
|
||||||
Name |
M******** B****
|
|||||
B**** R****
|
||||||
Telephone Number |
49942********
|
|||||
0049 ********
|
||||||
Fax Number |
+49 9********
|
|||||
0049 ********
|
||||||
m******@tuev-sued.de
|
||||||
B******@7layers.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.00871 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2402 | 2480 | 0.00178 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC | 2412 | 2472 | 0.48978 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.04365 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC | 5745 | 5825 | 0.02089 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC | 5180 | 5240 | 0.04365 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 38 CC | 5260 | 5320 | 0.05011 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 38 CC | 5500 | 5700 | 0.02884 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 38 CC | 5745 | 5825 | 0.02089 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402 | 2480 | 0.00871 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC | 2402 | 2480 | 0.00178 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC | 2412 | 2472 | 0.48978 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC