FCC ID: TZI-BB804336 Big Blue Media Tower

FPO Big BlueTM Media Tower ESSENCE STATEMENT HERE WORKING NAME AND ESSENCE TABLE OF CONTENTS Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER . THERE ARE NO SERVICEABLE PARTS INSIDE . TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE . The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the units enclosure that may be of sufficient magnitude to constitute a risk of electric shock . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the unit . IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read, heeded, adhered to and followed before the unit is operated . 2 SAFETY AND HANDLING INFORMATION For maximum product life, do not drop, throw or crush the speaker . Do not expose it to humidity, dust, or operating temperatures outside 32F to 113F (0C to 45C) . SAVE THESE INSTRUCTIONS!

DANGER To reduce the risk of electric shock, burns, fire or injury:

1 . Do not use while bathing or in a shower . 2 . Do not place or store unit where it can fall or be pulled into a tub or sink . 3 . Do not place in, drop or submerge in water or other liquid . 4 . Do not reach for a unit that has fallen into water . Unplug it immediately . 5 . Care should be taken so that objects do not fall and liquids are not spilled onto the unit . WARNING 1 . Close supervision is necessary when this appliance/product is used by or near children or mentally disabled individuals . 2 . Use this unit only for its intended use as described in this manual . 3 . Unplug this unit during lightning storms or when unused for long periods of time . 4 . Never drop or insert an object into any opening . 5 . Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit . 3 6 . Do not allow cord to touch hot surfaces . Wrap cord loosely around the unit when storing . 7 . The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat . Avoid placing on top of stereo equipment that radiates heat . 8 . Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked . 9 . Do not overload the electrical outlet . Use the power source only as indicated . 10 . Do not carry this unit by its cord or use the cord as a handle . 11 . Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water . If the units power supply cord or plug is damaged, do not attempt to fix it yourself . 12 . To avoid the risk of electric shock, do not disassemble or attempt to repair the unit . Incorrect repair can cause risk of electric shock or injury to persons when the unit is used . 13 . Do not operate in the presence of explosive and/or flammable fumes . 14 . Never remove the plug from the outlet by pulling the power cord . 4 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna . Increase the distance between the equipment and receiver . Connect the equipment to an outlet on a circuit different from that to which the receiver is connected . Consult the dealer or an experienced radio/TV technician for help . This equipment complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:

1 . This equipment may not cause harmful interference . 2 . This equipment must accept any interference received, including interference that may cause undesired operation . Modifications not authorized by the manufacturer may void the users authority to operate this device . 5 LOCATION OF PARTS AND CONTROLS 1 . Bluetooth Source and LED Indicator Digital Source and LED Indicator Analog Source and LED Indicator 2 . 3 . 4 . Bass +

5 . Bass -

6 . Volume/Bass/Treble LED Indicators 9 . Treble +

10 . Treble -

11 . Power/Pairing Button 7 . Volume +

8 . Volume -

1 2 3 12 . LED Ring 12 11 10 9 4 5 6 8 7 6 LOCATION OF PARTS AND CONTROLS 1 . RCA In Ports 2 . AUX Out Port 3 . Optical In Port 4 . DC In Port 5 . Adapter Output: 18V, 3 .35A Input: 100-240V AC, 50-60Hz 5 1 2 3 4 7 SET UP 1 . Connect the ADAPTERs jack to the DC IN POWER PORT on the back of Big Blue Tower . 2 . Plug the ADAPTER into an electrical outlet . PAIRING YOUR DEVICE 1 . Prepare your device to pair using Bluetooth, making sure you are within 33 feet of Big Blue . Refer to your devices owners manual for details if necessary . 2 . Turn the Big Blue Tower on by pressing the POWER/PAIRING button . 3 . Tap the Bluetooth touch sensitive control to put Big Blue Tower into Bluetooth mode . 4 . Press and hold the POWER/PAIRING button until the LED RING starts flashing . 5 . The Big Blue Tower is in pairing mode when the LED RING is flashing . Big Blue Tower will wait for a connection in pairing mode for up to 3 minutes . 6 . Once Big Blue Tower is in pairing mode and your device is ready to pair, select Big Blue Tower . If prompted, use 0000 as a PIN for the pairing code . 7 . Once Big Blue Tower is selected, the LED RING will change to solid blue and a beep will sound to confirm pairing is complete . Note: To cancel the pairing mode either press the POWER/PAIRING button to power the unit off, or wait the 3 minutes for Big Blue Tower to cancel pairing automatically. The LED RING will return to solid blue, and the unit will remain on. 8 USING BIG BLUE AFTER PAIRING 1 . Press the POWER/PAIRING button to turn on the Tower until the LED RING illuminates solid . 2 . Tap the Bluetooth touch sensitive Source Icon to put the Big Blue Tower into Bluetooth mode . 3 . Big Blue Tower should automatically remember you . Depending upon your device, you may have to select Big Blue Tower in your devices menu . 4 . To turn Big Blue Tower off, press the POWER/PAIRING BUTTON . Note: When Big Blue Tower is powered on, pressing any button will activate the function LEDs and the LED RING for 5 seconds. After 5 seconds has passed, the LEDs turn off and the LED RING remains on at a very low brightness level. ADJUSTING VOLUME 1 . Adjust the volume of Big Blue Towers sound by its touch sensitive controls . 2 . Tap the + or icons to slowly increase/decrease the volume, or place your finger on the symbols continuously to increase/decrease the volume at an accelerated rate . The LEDs will indicate the volume level is adjusting . 9 ADJUSTING BASS 1 . To fine-tune your audio depending on what type of music youre listening to through Big Blue Tower, you may adjust the Bass using the touch sensitive controls . 2 . Tap the + or icons to slowly increase/decrease the Bass or place your finger on the symbols continuously to increase/decrease the Bass at an accelerated rate . LEDs will indicate the Bass level is adjusting . ADJUSTING TREBLE 1 . To fine-tune your audio depending on what type of music youre listening to through Big Blue Tower, you may adjust the Treble using the touch sensitive controls . 2 . Tap the + or icons to slowly increase/decrease the Treble or place your finger on the symbols continuously to increase/decrease the Treble at an accelerated rate . LEDs will indicate the Treble level is adjusting . USING OPTICAL SOURCE You can connect Big Blue Tower to your TV or other audio source using an Optical cable (included) . 1 . Tap the Digital touch sensitive control to put Big Blue Tower into Digital mode . 2 . Plug one end of the Optical cable into the Optical Out port on the audio source . 3 . Plug the other end of the cable into the Big Blue Tower port labeled OPT . 4 . Use your audio device to control music playback and volume through Big Blue . 10 USING RCA SOURCE You can connect Big Blue Tower to your audio source using an RCA cable (included) . 1 . Tap the Analog touch sensitive control to put Big Blue Tower into Analog mode . 2 . Insert one end of the Dual RCA Cable (included) into the appropriately colored R/L LINE IN jacks on audio sources left and right audio output jacks . 3 . Insert the other end of the Dual RCA Cable into the appropriately colored R/L LINE IN jacks on Big Blue Tower . 4 . Use your audio device to control music playback and volume through Big Blue . Note: If there are no fixed-level audio outputs on your audio source, connect the Dual RCA Cable to the Y Adapter 3.5mm Cable (included) to connect to a 3.5mm jack. OUTPUTTING SOUND Connect other equipment or speakers by using audio cords with mini jacks (not included) to the AUX Out Port on the back of Big Blue . COMPATIBILITY Bluetooth 2 .0 or above device with A2DP . 11 TROUBLESHOOTING ISSUE SOLUTION Bluetooth disconnection . Ensure your device is within 33 feet of Big Blue Tower and reconnect your device to Big Blue Tower . Make sure unit is in Bluetooth Source mode by tapping the Bluetooth Source button . Sound is not clear or there is no sound at all . Power Big Blue Tower off and then back on . Adjust your devices equalizer . Check Big Blue Tower or your devices volume level . Music wont play on the speaker . Make sure Big Blue Tower is plugged in . Confirm device is paired or correct source is selected . Power Big Blue Tower off and then back on . Note: Big Blue Tower remembers the last device paired. If you would like to use another device, pair that device manually. Please refer to page X for pairing instruction. 12 SPECIFICATIONS Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 100V ~ 240V, 50/60 Hz (Input) DC 18V/3 .5A (Output) Total Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Watts Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 2, up to 33 ft (10 m) Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth 2 .1 with A2DP Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45mHz - 20kHz Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 1 .25" Tweeter +

2 x 3" mid-range driver +

1 x 4" Subwoofer Product Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 lbs (approximately) Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 .9"l x 7 .9"w x 38 .2"h 13 NOTES 14 NOTES 15 NOTES 16 ONE (1) YEAR LIMITED WARRANTY Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (Warranty Period) . If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product . A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product . When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstones property . When a store credit is given, the original product must be returned to Brookstone and becomes Brookstones property . Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819 . Please be prepared to describe the product that needs service and the nature of the problem . A purchase receipt is required . All repairs and replacements must be authorized in advance . Service options, parts availability and response times will vary . You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions . Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U .S . Territories of Guam, Puerto Rico, and the U .S . Virgin Islands . This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the Brookstone trademark, trade name, or logo affixed to them or their packaging . The Limited Warranty does not apply to any non-Brookstone products . Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, 17 but Brookstone, in so far as permitted by law, provides these products as is . This warranty does not apply to: a) damage caused by failure to follow instructions relating to products use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone;

d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold as is including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose . BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you . This warranty gives you specific legal rights and you may also have other rights, which vary from state to state . 18 Find thousands more great ideas online 804336 Merrimack, New Hampshire USA 03054 800-846-3000 Brookstone .com

(Clients Company Letterhead/log) Authority to Act as Agent Date:_ 18-Oct-2012 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

SGS-CSTC Standards Technical Services Co., Ltd. _ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). M We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 8 12 months SH Lee

(Print name) By:

Title: Safety Engineer On behalf of: ___ Arts Electronics Co., Ltd

(Company Name) Telephone: 086-0769-8554115

' Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 -6

(Clients Company Letterhead/log) Request for Confidentiality Date: 18-Oct-2012 Subject: Confidentiality Request for: __ FCC ID: TZI-BB804336 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit

[_] Short Term DX] Permanent Block Diagrams

[_] Short Term External Photos

[-] Short Term [[] Permanent*? Internal Photos

[] Short Term [X] Permanent Operation Description/Theory of Operation

[_] Short Term [X] Permanent Parts List & Placement/BOM

[_] Short Term [_] Permanent Tune-Up Procedure

(_] Short Term [>] Permanent Schematics

(_] Short Term Test Setup Photos

(_] Short Term [] Permanent* Users Manual

*Note: (Insert Explanation as Necessary) Arts Electronics Co., Ltd_ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _ (specify number of days not to exceed 180) days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked bove will simply be marked Confidential when submitted to IC. Sincerely, By: SH Lee / Safety Engineer

(Print name)

? _ The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.

> _ Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details.

* . Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 -6

ARTS ELECTRONICS CO.,LTD. eit etTaAR Se A NO.1 SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA TEL: 0769-85545115 FAX: 0769-85545117 20 Sep 2012 TO WHOM IT MAY CONCERN CONFIRMATION LETTER We certify that The model BBS37 is totally the same in ELECTRICAL and MECHANICAL construction as the model 804336 except the difference of model no. Sincerely SH. Lee Safety Engineer Arts Electronics Co. Ltd.