all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 459.17 KiB | January 11 2011 / February 11 2011 | |||
1 | Cover Letter(s) | January 11 2011 / February 11 2011 | ||||||
1 | Cover Letter(s) | January 11 2011 / February 11 2011 | ||||||
1 | Cover Letter(s) | January 11 2011 / February 11 2011 | ||||||
1 | External Photos | January 11 2011 / February 11 2011 | ||||||
1 | Internal Photos | January 11 2011 / February 11 2011 | ||||||
1 | ID Label/Location Info | January 11 2011 / February 11 2011 | ||||||
1 | RF Exposure Info | January 11 2011 / February 11 2011 | ||||||
1 |
|
Test Report Rev1 | Test Report | 2.00 MiB | January 11 2011 / February 11 2011 | |||
1 | Test Setup Photos | January 11 2011 / February 11 2011 |
1 | User Manual | Users Manual | 459.17 KiB | January 11 2011 / February 11 2011 |
Wi-Fi Internet Radio MODEL: MS-2275INT INSTRUCTION MANUAL NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. YOUR FM/INTERNET RADIO Introduction With this unit, you can enjoy both FM radio and Wi-Fi Internet radio, is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. Whats in the box Check and identify the contents of your package:
Main unit AC adaptor User manual IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions carefully and keep them in a safe place. Do not use this appliance near water. Clean only with a soft dry cloth. Only use attachments/accessories specified by the manufacturer. Unplug this unit during lightening storms or when not in use. Refer all servicing to a qualified service personnel. Servicing is required when the appliance is damaged in any way. This appliance shall not be exposed to dripping or splashing water. No object filled with liquids such as vases shall be placed on the appliance. Do not place naked flame sources such as candles on the appliance. Make sure all electrical connections are properly made in accordance with the manufacturers instructions. Switch off and unplug from the mains before changing any connections. Make sure the mains cord is routed so that it is not likely to be walked on, or subjected to water and heat. Do not obstruct the vents which such things as newspapers, tablecloths, curtains and so on. Do not operate the appliance if you are in doubt about it working normally, or if it is damaged in any way. Make sure the is adequate ventilation space around the appliance, at least 10 cm at the sides and on the top. Lower the volume before using headphones with this unit, then gradually increase the volume to a comfortable level. Listening to music at a high volume and for a prolonged period of time can cause damage to hearing. Always unplug from the mains when not in use. Electrical Information Warning Read these electrical safety instructions carefully before connecting the AC adaptor to the mains This unit is supplied with an AC mains adaptor. This AC mains adaptor is designed to operate on AC 100-240V, 50/60Hz supply only. Connecting it to any other power sources may damage the unit. The AC mains adaptor is designed for indoor use only. The AC mains adaptor is a sealed unit. There are no user serviceable parts inside and it does not require any electrical adjustments. Do not attempt to open the AC mains adaptor. If the AC mains adaptor is not suitable for your socket, or becomes damaged, it must be replaced and disposed of in a safe and environmentally protective way. Always refer to qualified personnel. Periodically inspect the AC mains adaptor for damage. Do not use if faults or damages are found. Refer to qualified personel. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCCs radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device
(excluding its handset) and users. 1 2 TOP AND FRONT VIEW 1. Speaker 2. DOWN/UP Knob 3. LCD Display 4. MENU Button 5. FAV Button 6. MODE Button 7. ON/OFF Button REAR VIEW 8. FM Antenna Rod 9. Headphone Jack 10. AUX IN Jack 11. AUX OUT Jack 12. Internet Port 13. DC Socket LOCATION OF UNIT CONTROLS GENERAL CONTROLS 1 2 Connect power 1. Connect one end of the AC adaptor to the DC socket on the main unit. 2. Connect the other end of the AC adaptor to the wall outlet. 3 4 5 6 7 8 9 10 11 12 13 Turning on or off the unit Press the ON/OFF button to turn the unit ON or OFF. To select mode Press MODE, there are 4 mode to select:
Internet radio FM Aux in Music archive Using the menus The display window shows the playback screen, browse screen, settings screen, messages etc. What appears on the window varies depending on the function you are using. To navigate in the menus:
Use the DOWN/UP knob to make choices and input information. Moves up - Rotate the DOWN/UP knob clockwise on the main unit Moves down - Rotate the DOWN/UP knob counter-clockwise on the main unit OK - Press the DOWN/UP knob to confirm selected option To input characters:
Some menus require character input (e.g. password). When inputting characters, rotate the DOWN/UP knob to select the alpha-numeric characters listed on the screen. Press DOWN/UP knob to confirm the selections. To erase a mistake, press BKSP. When finished inputting, select OK on the screen and then press DOWN/UP knob or OK. Current selection Current input Key:
01234567890., -@, abcdefghijklmn opqrstuvwxyzABC DEFGHIJKLMNOPQR BKSP OK ESC More selections available Audio controls Rotate the DOWN/UP knob on the main unit to adjust sound level during playback. The current volume shows on the display temporarily before returning to the previous display. When sound is cut, shows on the display. To retort the sound output, rotate the DOWN/UP knob clockwise. Display The dot-matrix display is a dynamic and intuitive interface that provides many necessary information during operation. Some of the key displays are illustrated below for your easy reference. Alarms set Sleep timer set Mute set Wi-Fi signal strength 3 4 INTERNET RADIO OPERATION INTERNET RADIO OPERATION To store a station as a preset:
A maximum of 10 preset stations can be set. 1. Select and start listening to an Internet radio station. 2. Press and hold FAV button, the display will shows:
Save Preset 1. [Not set]
2. [Not set]
3. [Not set]
4. [Not set]
5. [Not set]
3. Rotate the DOWN/UP knob to select one station and then press DOWN/UP knob to store. Repeat step 1-3 to store more preset stations. If your selected preset number is already stored with a station, the existing station will be replaced with the new one. To listen to a preset station:
Press FAV. Rotate the DOWN/UP knob to select one station of 1-10 you want listen. Press DOWN/UP knob to confirm. Introduction You must connect with the Internet in order to use the Internet Radio. Before you can use the Internet part of the unit you must have a working broadband Internet connection:
A wireless (Wi-Fi) access point (AP). If your wireless network is already in use it might have Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption. You will need to enter the WEP or WPA key word into the unit so that it can communicate with the router. The access point in a wireless network has a name known as the SSID. You will need to tell the unit the SSID when setting it up for the first time. Usually the SSID starts out as the brand and model of the router, although it is a good idea to change it if there are other networks, so identic cation of the correct network (SSID) is easier. Legally speaking, you should not connect to the Internet through someone elses network. Apart from the legal aspect, sharing a wireless link will make audio from the Internet more prone to interruptions. Wireless router range is usually enough for domestic use but can be adversely affected by some building materials and interference sources such as other nearby wireless networks. If your Internet connection is still not working after settings, always try disconnecting mains power to all the devices in the network. Then switch things back on in this order:
1. Modem. Wait a minute for the indicator lights to settle down 2. Router (if separate). Again, wait a minute for the indicator lights to settle down 3. Computer(s) re-start 4. This unit Internet connections To connect to the Internet by automatic scanning:
1. Press ON/OFF or STANDBY to turn of the unit. 2. Press MODE to select internet radio mode. The unit will look for all available Internet network in your surroundings and show them on the display. You will see the following screen when you turned on the unit for the first time. Internet setup Network wizard Loading /
SSID D-3-PCB ED-wifi
[WPS]arts-philips arts-pmd D-1-1 3. Rotate the DOWN/UP knob to select your Internet network (SSID) and then press DOWN/UP knob. Key:
01234567890., -@, abcdefghijklmn opqrstuvwxyzABC DEFGHIJKLMNOPQR BKSP OK ESC 4. If your network is password-protected, enter the password now with reference to the instructions on page 4. You will then be connected to the Internet. 5 With Internet Radio, you can listen to music/radio programmes in other countries or from your hometown. If offers the most music selections from around the world and most of them are free. Listening to Internet Radio To access the Internet Radio mode:
Press MODE repeatedly until Internet Radio mode is selected, OR Press MENU to show the main menu on the display and then rotate the DOWN/UP knob to highlight Main menu and then press DOWN/UP knob. To browse and listen to an Internet radio station:
1. In Internet Radio mode, rotate the DOWN/UP knob to highlight Station list and then press DOWN/UP knob. Internet Radio Last listened Station list System Setup Main Menu 2. Rotate the DOWN/UP knob to further highlight a category or subcategory and then press DOWN/UP knob Internet radio My Favourites Local China Stations Podoasts My Added Stations 3. While a station is highlighted, press DOWN/UP knob to start listening. 11:48 Internet radio CRI Chinese Description:
Not specified Some radio stations do not broadcast 24 hours per day, and some stations are not always on-
line. 6 MUSIC ARCHIVE OPERATION IMPORTANT INFORMATION Use the digital music library on your PC To take access on your digital music library on your computer connect unit via WLAN or with an Ethernet cable to your computer or the router of your home network. The requirement is a setup of a Windows Media player as UPnP-server. To set up a Media player IMPORTANT INFORMATION To use this function you need to install a Windows Media player 11 on your computer. The computer with the installed Media player have to use the same (wireless) network as the unit. If you have an activated firewall in your network and/or on your computer with the installed Windows Media player, you should change your settings if necessary so that a connection can be used. For this purpose please read the manual/guide of your used firewall. The access of the data is regulated by your Media player. Basic information and how to use the media data can be found in the guide and help of your Media player. Press the ON/OFF button, to power on the unit. Start the Windows Media player 11 on your computer. Click media library on the menu bar and on the following displayed menu click shared media. A window Release/Shared Media appears. Please, tick Shared Media. Press the button OK. A window with unknown devices appears. If no unknown device is shown even though the unit is switched on, please try to set up a connection with the unit, as you can read in the next chapter about the playing of the unit. You can check the MAC-address of your unit if you want to find out which of the displayed devices is your radio. You can see the MAC-address on your computer if you go with your cursor to unknown device and click on with the right mouse button, after that click with the left mouse button on the features. At your unit you can find the address in the menu System Settings/Info. Click on Settings, to adjust the release setting. Enter a clear release name under menu item release/shared media and change the basic settings if necessary. Press the button OK. 7 8 Click on Admit and then on the OK button to complete the process. FM OPERATION To access the FM Tuner mode:
Press MODE repeatedly until FM mode is selected, OR Press MENU to show the main menu on the display and then rotate the DOWN/UP knob to highlight Main menu and then press DOWN/UP knob to confirm. Rotate the DOWN/UP knob to highlight FM and then press DOWN/UP knob to confirm. Main menu Internet radio FM Auxiliary Input Music archive Sleep To perform a station search:
Press the DOWN/UP knob repeatedly to adjust frequency. Use this method to tune to weak or distant stations that are not strong enough to be recognized by the automatic searching. Press the DOWN/UP knob until Searching shows on the display to automatically search for the next available station. DST 08:45 89.80MHz Today's Date:
12/09/2009 To store a station as a preset:
A maximum of 10 preset stations can be set. 1. Select and start listening to an FM station. 2. Press and hold FAV, the display will shows:
Save Preset 1. [Not set]
2. [Not set]
3. [Not set]
4. [Not set]
5. [Not set]
3. Rotate the DOWN/UP knob to select one station and then press DOWN/UP knob to store. Repeat step 1-3 to store more preset stations. If your selected preset number is already stored with a station, the existing station will be replaced with the new one. To listen to a preset station:
Press FAV. Rotate the DOWN/UP knob to select one station of 1-10 you want listen. Press DOWN/UP knob to confirm. Playing of the unit Press MODE repeatedly until Music archive mode is selected, OR Press MENU to select: Main menu Music archive. Confirm Shared media with the DOWN/UP knob. Press the MENU button. Rotate the DOWN/UP knob to select the menu System setup > Network setup > Manual settings. Select the desired connection type wired or wireless and confirm with pressing the DOWN/UP knob. Enter the requested information/data of your home network according to your selected connection type until the display shows connected. Complete the menu settings Press the DOWN/UP knob to switch to the Music archive. Press the DOWN/UP knob to activate the Media Server. If several UPnP-server are shown, select the desired server and confirm this with the DOWN/UP knob. The display shows the available media. Select Music and confirm with the DOWN/UP knob. Select with the DOWN/UP knob a sort function and confirm with the DOWN/UP knob. Proceed as just described in the submenu until you get to a title list. Select with the DOWN/UP knob a title and confirm this with the DOWN/UP knob. The title will be played. 9 10 CLOCK, ALARM AND SLEEP TIMER OPERATION CLOCK, ALARM AND SLEEP TIMER OPERATION To set the clock and date:
1. Press MENU to show the system setup on the display and then rotate the DOWN/UP knob to highlight system setup and then press DOWN/UP knob to confirm. 9. Repeat step 1-3 to set Auto update and Format saving. The time and date are now set. The clock time will display when the unit is turned off. System Setup Network Setup Time/Date Display brightness EQ Language 2. Rotate the DOWN/UP knob to highlight Time/Date and then press DOWN/UP knob to confirm. Time/Date Set Time/Date Time Syschronisation Set format 3. Rotate the DOWN/UP knob to highlight Set Time/Date and then press DOWN/UP knob to confirm. Set Time/Date 01-01-2011 00:00 4. Rotate the DOWN/UP knob to change the month and then press DOWN/UP knob to confirm. 5. Rotate the DOWN/UP knob to change the day and then press DOWN/UP knob to confirm. 6. Rotate the DOWN/UP knob to change the year and then press DOWN/UP knob to confirm. 7. Rotate the DOWN/UP knob to change the hour and then press DOWN/UP knob confirm. 8. Rotate the DOWN/UP knob to change the minute and then press DOWN/UP knob to confirm. To set the alarm:
1. Press MENU to select: Main menu Alarm. Alarm Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
2. Rotate the DOWN/UP knob to set Alarm 1 or Alarm 2 then press DOWN/UP knob to confirm. Alarm 1 Enable: Off Frequency: Daily Time: 00:00 Mode: Internet radio Preset: last listened 3. Rotate the DOWN/UP knob to highlight Enable then press DOWN/UP knob to set Alarm Enable On or Off. 4. Rotate the DOWN/UP knob to highlight Frequency and then press DOWN/UP knob to set Alarm frequency (Daily or Once or Weekends or Weekdays). Set alarm frequency Daily Once Weekends Weekdays 5. Rotate the DOWN/UP knob to highlight Time and then press DOWN/UP knob to set Alarm time. Set alarm time 00:00 6. Rotate the DOWN/UP knob to highlight Mode and then press DOWN/UP knob to set Alarm mode
(Buzzer or Internet radio or FM) To deactivate the alarm completely:
1. Press MENU to select: Main menu Alarm Alarm 1 or Alarm 2. Set alarm mode Buzzer Internet Radio FM Alarm 1 Enable: On Frequency: Daily Time: 00:00 Mode: Internet radio Preset: last listened 7. Rotate the DOWN/UP knob to highlight Preset and then press DOWN/UP knob to set Alarm preset. Set alarm preset Last listened 1. [Not set]
2. [Not set]
3. [Not set]
4. [Not set]
8. Rotate the DOWN/UP knob to highlight volume and then press DOWN/UP knob to set Alarm volume. 9. After each setting is done, rotate the DOWN/UP knob to highlight Save and then press DOWN/UP knob to save. When the alarm is activated, an alarm icon
( or ) will show at the lower left corner of the display. Turning off the alarm To stop the alarm when it sounds:
Press ON/OFF button to turn off the alarm. To silence the alarm temporarily (Snooze):
Press DOWN/UP knob. To set the silence time of the alarm temporarily
(Snooze):
Press DOWN/UP knob repeatdly to select the silence time (5min or 10min or 15min or 30min). The alarm will sound again when the snooze period (5 or 10 or 15 or 30 minutes) is over. 2. Press DOWN/UP knob to set Alarm Enable Off. Sleep timer The unit includes a programmable sleep timer to play the unit for a set length of time before turning off automatically. To use the sleep timer:
The unit includes a programmable sleep timer to play the unit for a set length of time before turning off automatically. 1. Press MENU to select: Main menu Sleep. The display will shows:
Set sleep time Sleep Off 2. Rotate the DOWN/UP knob. The length of time varies between 00:15 (15 minutes) to 01:00 (1 hour). Each rotate of the DOWN/UP knob will increase or decrease the time by 15 minutes. Select OFF if you want to cancel using this function. A small clock icon ( ) will show at the lower left corner of the display when sleep timer is activated. To turn off the unit earlier, simply press ON/OFF. 11 12 CONNECTING EXTERNAL DEVICES SPECIAL FUNCTION Auxiliary Input Jacks This unit includes two auxiliary inputs, both on the back labeled "AUX IN" and "AUX OUT". These inputs allow you to connect external audio sources and play the audio through the speaker of the unit. To listen to the external audio source:
1. Connect the external audio equipment to the AUX IN jack on the back panel. 2. Press MODE repeatedly until Aux in mode is selected, OR Press MENU to show the main menu on the display and then rotate the DOWN/UP knob to highlight Main menu and then press DOWN/UP knob to confirm. Rotate the DOWN/UP knob to highlight Aux in and then press DOWN/UP knob to confirm. 09:45 Auxiliary Input Audio in Today's Date:
08/15/2011 3. Audio plays through the unit's speaker. 1. Language You can choose the languages German or English or French or Italian for your display information.. Select your language in the menu System setup/language with the DOWN/UP knob choose Spanish or English or French and confirm this with the DOWN/UP knob. 2. Factory setting IMPORTANT INFORMATION All settings of your configuration will be deleted if you activate the factory setting. Select Factory Reset in the menu System setup to confirm your reset use the DOWN/UP knob to select YES and press the DOWN/UP knob. The device is reset to the factory settings and restarts. 3. Software Update IMPORTANT INFORMATION During an update the unit should not be switched off. Follow the instructions on your display. version for this unit will be available some day. It is possible that an updated software The automatic checking for updates is preset. Check if a new version is available. Select the mode Internet Radio with the button MODE. Press the button MENU. Select the menu System setup and open the menu item Software update. Select Check now and press the DOWN/UP knob. Checkin for new versions... appears on the display. If the date of the software will be displayed on the screen the current software is up-to-date and no update is available/necessary. If an update is available please follow the instructions on your display. 4. Info Select the menu item Info in the menu System settings to get information about the current SW version and the Radio ID of your unit. 13 14 GLOSSAR TROUBLESHOOTING Radio Poor radio reception The FM antenna is not properly extended and positioned. Extend completely and try another position. Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave and uorescent lights. DHCP (Dynamic Host Configuration Protocol) This enables the server or router a dynamic assignment of your IP address for the network components. An additional configuration is not necessary. IP-Adresse A common standard to determine a house number (address) according to the transmission protocol IP
(Internet protocol). Every device gets an explicit group of number which were separated through 4 points, e.g. 192.80.178.34. DHCP assigns this automatically; a dynamic IP address will be assigned every time you get a internet connection, static IP addresses will be assigned to the individual MAC addresses of your added devices in your home network. DRM The Digital Rights Management is a process to control digital media rights. LAN Local Area Network or LAN is a computer network covering a small local area, like a home. MAC-Adresse The Media Access Control Address or MAC address is a static not changeable address which can identify network components unambiguously. You can find the MAC address of your unit in the menu System settings - Info. Router A router is a network component (an electronic device or software in a computer) which connects the subnet mask or the other network components and forward packets of data to the right components. A router (with access point) interconnects the unit with the Internet and your computer in a home network. SSID (Service Set Identifier) SSID or ESSID (Extended Service Set Identifier) is a name that identifies a particular 802.11 wireless LAN, this can identify the network unambiguously. Due to the set up of the network (or router) the identification will be assigned. The unit can identify automatically all found networks, the SSID can also be entered manually. UPnP (Universal Plug and Play) UPnP is an industry standard (published by Microsoft) that uses Internet and web protocols to enable devices such as your PC and your unit, etc. to be plugged into a network and automatically know about each other. Your unit can use this standard to communicate with your home network. General No power AC connection is not complete. Check all cords and cables. No sound is heard Volume is too low. Increase the volume. Internet radio Cannot connect to unit to Internet Check if your access point is turned on. Check if all connections are properly made. Make sure a firewall is not blocking any outgoing ports. Make sure you have entered the correct password. Password is case sensitive. Your wireless Internet connection may exceed the maximum range for reception. Relocate the unit closer to the wireless access point. The network settings of the unit may be incorrect. Check the network settings again. The unit connects to the Internet but is unable to play a particular station Check if the station is still broadcasting. The station may have reached the maximum number of simultaneous listeners. The link to the radio station may be out of date. The Internet connection between the radio station server and the unit may be too slow. Intermittent audio The bandwidth of your wireless LAN may be too low. Move the radio closer to the access point and make sure that there are no obstacles between them. The actual transmission speed of digital radio broadcast depends on the service provider (i.e. the Internet radio station). 15 16 1. General Power requirements Power consumption Dimensions of main unit Weight of main unit 2. Amplifier section Power Output 3. Tuner FM Tuning range Preset memory stations 4. Speaker system Speaker Impedance SPECIFICATIONS INPUT: 110-240V ~ 50/60Hz 0.7A OUTPUT: 12.0V 1.5A 18W (operation) 1.8W (standby) 250 (W) x 130 (H) x 132 (D) mm 1.6 Kg 5 Watt x 1 87.5 MHz to 108 MHz (100 KHz Step) 10 1 Way 1 Speaker 8 ohms 17
1 | Test Report Rev1 | Test Report | 2.00 MiB | January 11 2011 / February 11 2011 |
SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 Email:
sgs_internet_operations@sgs.com FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 1 Cover Page Report No.: GZEM110800312101 Page:
1 of 77 FCC ID: TZI-WF1015 TEST REPORT Application No.:
GZEM1108003121AV Applicant:
FCC ID:
Arts Electronics Co., Ltd. TZI-WF1015 Product Name:
Internet radio with FM and alarm clock Product Description:
Internet radio with 2.4 GHz as carrier Model No.:
Trade Mark:
MS-INT2275 MetroSonix Standards:
FCC PART 15 Subpart C: 2010 section 15.247 Date of Receipt:
2011-08-22 Date of Test:
2011-08-22 to 2011-09-01 Date of Issue:
2011-09-09 Test Result :
Pass*
*
In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. Authorized Signature:
Strong Yao Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only to Terms and Conditions 2 Version SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 2 of 77 FCC ID: TZI-WF1015 Version Chapter Date Modifier Remark Revision Record 00 2011-09-09 Authorized for issue by:
Tested By Prepared By Checked By
(Daniel He) /Signature
(Daniel He) /Signature
(Strong Yao) /Reviewer Original 2011-08-22 to 2011-09-01 Date 2011-09-09 Date 2011-09-09 Date This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 3 of 77 FCC ID: TZI-WF1015 3 Test Summary Test Test Requirement Test method Result Antenna Requirement 6 dB Bandwidth FCC PART 15 C FCC PART 15 C section 15.247 (c) and Section 15.203 section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (a)(2) ANSI C63.10: Clause 6.9 and KDB558074 Maximum Peak Output Power FCC PART 15 C section 15.247(b)(3) ANSI C63.10: Clause 6.10 and KDB558074 (Power Output Option 2-Method
#1). PASS PASS PASS Peak Power Spectral Density Conducted Spurious Emission
(30MHz to 25GHz) Radiated Spurious Emission 30 MHz to 25 GHz) FCC PART 15 C section 15.247(e) FCC PART 15 C section 15.209
&15.247(d) FCC PART 15 C section 15.209
&15.247(d) FCC PART 15 C Band Edges Measurement section 15.247 (d) Conducted Emissions at Mains Terminals Remark:
&15.205 FCC PART 15 C section 15.207 ANSI C63.10: Clause 6.11 and KDB558074 (PSD PASS Option 1). ANSI C63.10: Clause 6.7 and KDB558074. PASS ANSI C63.10: Clause 6.4, 6.5 and 6.6 & KDB558074 PASS ANSI C63.10: Clause 6.9
& KDB558074. ANSI C63.10: Clause 6.2
& KDB558074. PASS PASS N/A: not applicable. Refer to the relative section for the details. EUT: In this whole report EUT means Equipment Under Test. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radio Frequency. ANSI C63.10: the detail version is ANSI C63.10:2009 in the whole report. KDB558074: DTS test procedure of March 2005 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 4 of 77 FCC ID: TZI-WF1015 4 Contents 1 COVER PAGE ................................................................................................................................................. 1 2 VERSION.......................................................................................................................................................... 2 3 TEST SUMMARY ............................................................................................................................................ 3 4 CONTENTS ...................................................................................................................................................... 4 5 GENERAL INFORMATION ............................................................................................................................ 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 Client Information .............................................................................................................................. 5 General Description of E.U.T. ........................................................................................................... 5 Details of E.U.T. ................................................................................................................................ 5 Description of Support Units .............................................................................................................. 6 Deviation from Standards ................................................................................................................... 6 Abnormalities from Standard Conditions ........................................................................................... 6 Other Information Requested by the Customer .................................................................................. 6 Test Location ...................................................................................................................................... 6 Test Facility ........................................................................................................................................ 7 6 EQUIPMENT USED DURING TEST .............................................................................................................. 8 7 TEST RESULTS ............................................................................................................................................ 10 7.1 7.2 7.3 7.4 E.U.T. test conditions........................................................................................................................ 10 Antenna Requirement ....................................................................................................................... 12 6 dB Bandwidth ................................................................................................................................ 13 Maximum Peak Output Power.......................................................................................................... 18 7.5 Peak Power Spectral Density .................................................................................................................... 25 7.5 7.6 7.7 7.8 Conducted Spurious Emissions ........................................................................................................ 31 Radiated Spurious Emissions ........................................................................................................... 41 Band Edges Requirement ................................................................................................................. 70 Conducted Emissions at Mains Terminals 150 kHz to 30MHz ........................................................ 74 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 5 of 77 FCC ID: TZI-WF1015 5 General Information 5.1 Client Information Applicant:
Arts Electronics Co., Ltd. Address of Applicant:
NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA 5.2 General Description of E.U.T. Product Name:
Model No.:
Trade Mark:
Internet radio with FM and alarm clock MS-INT2275 MetroSonix 5.3 Details of E.U.T. Operating Frequency 2412-2462MHz Type of Modulation:
Transmit Data Rate:
802.11b: DSSS(CCK/QPSK/BPSK) 802.11g: OFDM(BPSK/QPSK/16QAM/64QAM) 802.11b :1M/2M/5.5M/11M bps 802.11g :6M/9M/12M/18M/24M/36M/48M/54M bps Number of Channels 11 Channels Channel Separation:
5 MHz Antenna Type Antenna gain:
Function:
External WIFI antenna 2.5dBi Internet radio with 2.4 GHz as carrier Power Supply:
AC 100-240V 50/60Hz 0.7A Adaptor:
Model:AS190-120-BA150 Input: AC 100-240V 50/60Hz 0.7A Output: DC 12.0V 1.5A Power cord:
1.7 m x 2 wires unscreened DC cable This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 6 of 77 FCC ID: TZI-WF1015 5.4 Description of Support Units The EUT has been tested as an independent unit for fixed frequency by testing lab. 5.5 Deviation from Standards Biconical and log periodic antennas were used instead of dipole antennas. 5.6 Abnormalities from Standard Conditions None. 5.7 Other Information Requested by the Customer None. 5.8 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 5.9 Test Facility SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 7 of 77 FCC ID: TZI-WF1015 The test facility is recognized, certified, or accredited by the following organizations:
NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is recognized under the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0.
ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian C-Tick mark as a result of our NVLAP accreditation.
SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES.
CNAS (Lab Code: L0167) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in compliance with CNAS-CL01:2006 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of Testing Laboratories.
FCC (Registration No.: 282399) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 282399, May 31, 2002.
Industry Canada (Registration No.: 4620B-1) The 3m/10m Alternate Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Certification and Engineering of Industry Canada for radio equipment testing with Registration No. 4620B-1.
VCCI (Registration No.: R-2460 and C-2584) The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-2460 and C-2584 respectively.
CBTL (Lab Code: TL129) SGS-CSTC Standards Technical Services Co., Ltd., E&E Laboratory has been assessed and fully comply with the requirements of ISO/IEC 17025:2005, the Basic Rules, IECEE 01:2006-10 and Rules of procedure IECEE 02:2006-10, and the relevant IECEE CB-Scheme Operational documents. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 8 of 77 FCC ID: TZI-WF1015 6 Equipment Used during Test RE in Chamber No. Test Equipment Manufacturer Model No. Serial No. Cal.Due date
(YYYY-MM-DD) Calibratio n Interval EMC0525 Compact Semi-
Anechoic Chamber ChangZhou ZhongYu N/A N/A 2012-09-06 EMC0522 EMI Test Receiver Rohde & Schwarz ESIB26 EMC0056 EMI Test Receiver Rohde & Schwarz EMC0514 Coaxial cable SGS ESCI N/A 100283 10036 N/A 2012-01-17 2012-06-01 2011-12-08 EMC2025 Trilog Broadband Antenna 30-3000MHz SCHWARZBECK MESS-
VULB 9163 9163-450 2011-10-28 ELEKTRONIK EMC0524 Bi-log Type Antenna Schaffner -Chase CBL6112B EMC0519 Bilog Type Antenna Schaffner -Chase CBL6143 2966 5070 2011-12-20 2011-12-20 EMC2026 Horn Antenna 1-18GHz R&S BBHA 9120D 9120D-841 2011-10-28 EMC0518 Horn Antenna Rohde & Schwarz HF906 100096 2012-08-29 EMC0521 1-26.5 GHz Pre-Amplifier EMC0049 Amplifier EMC0075 310N Amplifier EMC0523 Active Loop Antenna EMC2041 Broad-Band Horn Antenna(14)15-
Agilent Agilent Sonama EMCO SCHWARZBECK 8449B 8447D 310N 6502 3008A01649 2012-01-17 2944A10862 2012-04-21 272683 42963 2011-10-25 2011-11-17 MESS-
BBHA 9170 9170-375 2012-06-01 26.5(40)GHz ELEKTRONI 2Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y EMC0530 10m Semi- Anechoic Chamber Conducted Emission ETS N/A N/A 2012-05-10 2Y No. Test Equipment Manufacturer Model No. Serial No. Cal.Due date
(YYYY-MM-DD) Calibratio n Interval EMC0306 Shielding Room Zhong Yu 8 x 3 x 3.8 m3 N/A N/A N/A EMC0118 Two-line v-netwok R&S ENV216 100359 2012-08-29 EMC0102 LISN SCHAFFNER CHASE MN2050D/1 1421 2011-11-23 EMC2046 Artificial Mains Network
(LISN) AFJ Instruments LT32C S.N.320311201 50 2012-05-18 EMC0506 EMI Test Receiver Rohde & Schwarz ESCS30 100085 2011-11-24 EMC0107 Coaxial Cable EMC0106 Voltage Probe SGS SGS 2m N/A N/A N/A 2012-07-18 N/A EMC0120 8 Line ISN EMC0121 4 Line ISN EMC0122 2 Line ISN Fischer Custom Communications Inc. Fischer Custom Communications Inc. Fischer Custom Communications Inc. FCC-TLISN-T8-02 20550 2012-01-17 FCC-TLISN-T4-02 20549 2012-01-17 FCC-TLISN-T2-02 20548 2012-01-17 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y 1Y This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 9 of 77 FCC ID: TZI-WF1015 General used equipment No. Test Equipment Manufacturer Model No. Serial No. Cal.Due date
(YYYY-MM-DD) Calibratio n Interval EMC0006 EMC0007 DMM DMM Fluke Fluke 73 73 70681569 2011-12-16 70671122 2011-12-16 1Y 1Y This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 10 of 77 FCC ID: TZI-WF1015 7 Test Results 7.1 E.U.T. test conditions Test Voltage:
Input: AC 120V, 60 Hz Output: DC 12V Temperature:
20.0 -25.0 C Humidity:
38-50 % RH Atmospheric Pressure: 1000 -1010 mbar Requirements:
15.31(e): For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage. For battery operated equipment, the equipment tests shall be performed using a new battery. 15.32: Power supplies and CPU boards used with personal computers and for which separate authorizations are required to be obtained shall be tested as follows: Testing shall be in accordance with the procedures specified in Section 15.31 of this part. Test frequencies and According to the 15.31(m) Measurements on intentional radiators or frequency range:
receivers, other than TV broadcast receivers, shall be performed and, if required, reported for each band in which the device can be operated with the device operating at the number of frequencies in each band specified in the following table:
According to the 15.33 (a) For an intentional radiator, the spectrum shall be investigated from the lowest radio frequency signal generated in the device, without going below 9 kHz, up to at least the frequency shown in the following table:
Number of fundamental frequencies to be tested in EUT transmit band Frequency range in which device operates 1 MHz or less 1 MHz to 10 MHz More than 10 MHz Number of frequencies 1 2 3 Location in frequency range of operation Middle 1 near top and 1 near bottom 1 near top, 1 near middle and 1 near bottom This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 11 of 77 FCC ID: TZI-WF1015 Frequency range of radiated emission measurements Lowest frequency generated in the device 9 kHz to below 10 GHz Upper frequency range of measurement 10th harmonic of highest fundamental frequency or to 40 GHz, whichever is lower At or above 10 GHz to below 5th harmonic of highest fundamental frequency or to 100 GHz, 30 GHz whichever is lower At or above 30 GHz 5th harmonic of highest fundamental frequency or to 200 GHz, whichever is lower, unless otherwise specified EUT channels and frequencies list:
Channel Frequency
(MHz) 1 2 3 4 5 6 7 8 9 10 11 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Test frequencies are the lowest channel: 1 channel(2412MHz), middle channel: 6 channel(2437 MHz) and highest channel: 11 channel(2462 MHz) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 12 of 77 FCC ID: TZI-WF1015 7.2 Antenna Requirement Standard requirement 15.203 requirement:
For intentional device. According to 15.203. an intentional radiator shall be designed to Ensure that no antenna other than that furnished by the responsible party shall be used with the device. 15.247(c) (1)(i) requirement:
(i) Systems operating in the 2400-2483.5 MHz bands that are used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6 dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. EUT Antenna The antenna is an External WIFI antenna and no consideration of replacement. The best case gain of the antenna is 2.5dBi. Test result: The unit does meet the FCC requirements. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 13 of 77 FCC ID: TZI-WF1015 7.3 6 dB Bandwidth Test Requirement:
FCC Part 15 C section 15.247
(a)(2)Systems using digital modulation techniques may operate in the 902-928 MHz, 2400-2483.5MHz, and 5725-5850 MHz bands. The Test Method:
Test Status:
minimum 6 dB bandwidth shall be at least 500 kHz. ANSI C63.10: Clause 6.9 and KDB558074 Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed Test Configuration:
below. Test Procedure:
1. Remove the antenna from the EUT and then connect a low attention attenuation RF cable
(cable loss =2.0dB) from the antenna port to the spectrum. 2. Set the spectrum analyzer: RBW=100KHz. VBW = 300KHz, Sweep = auto; Detector Function =
Peak. Trace = Max Hold, Set span to encompass the entire emission bandwidth of the signal. 3. Mark the peak power frequency and -6dB (upper and lower) power frequency. 4. Repeat until all the test status is investigated. 5. Report the worse case. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 14 of 77 FCC ID: TZI-WF1015 Channel Frequency No.
(MHz) Measured 6dB Mode Data Rate bandwidth Limit Result
(MHz) 1 6 11 1 6 11 2412 11 Mbps 9.97996 Pass 2437 802.11b 11 Mbps 9.91984 500KHz Pass 2462 2412 11 Mbps 9.97996 54 Mbps 16.73346 Pass Pass 2437 802.11g 54 Mbps 16.73346 500KHz Pass 2462 54 Mbps 16.73346 Pass Test result: The unit does meet the FCC requirements. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 15 of 77 FCC ID: TZI-WF1015 6dB bandwidth:
Result plot as follows:
802.11b mode with 11Mbps data rate Channel 1:2.412GHz:
Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1 ndB]
RBW 100 kHz RF Att 40 dB ndB 6.00 dB VBW 300 kHz BW 9.97995992 MHz SWT 7.5 ms Unit dBm 1 [T1] -2.89 dBm A 2.41257114 GHz ndB 6.00 dB BW 9.97995992 MHz T1 [T1] -8.91 dBm 1 T1 T2 2.40691984 GHz T2 [T1] -8.95 dBm 2.41689980 GHz 1MA 17 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80
-83 Center 2.412 GHz 3 MHz/
Span 30 MHz Channel 6:2.437GHz:
Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1 ndB]
RBW 100 kHz RF Att 40 dB ndB 6.00 dB VBW 300 kHz BW 9.91983968 MHz SWT 7.5 ms Unit dBm 1 T1 1 [T1] -3.09 dBm A 2.43570741 GHz ndB 6.00 dB BW 9.91983968 MHz T1 [T1] -9.19 dBm T2 2.43191984 GHz T2 [T1] -9.08 dBm 2.44183968 GHz 1MA 17 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80
-83 Center 2.437 GHz 3 MHz/
Span 30 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 16 of 77 FCC ID: TZI-WF1015 Channel 11:2.462GHz:
Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1 ndB]
RBW 100 kHz RF Att 40 dB ndB 6.00 dB VBW 300 kHz BW 9.97995992 MHz SWT 7.5 ms Unit dBm 1 [T1] -5.11 dBm A 2.46257114 GHz ndB 6.00 dB BW 9.97995992 MHz T1 1 T1 [T1] -10.82 dBm 2.45685972 GHz T2 T2 [T1] -11.05 dBm 2.46683968 GHz 1MA 17 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80
-83 Center 2.462 GHz 3 MHz/
Span 30 MHz 802.11g mode with 54Mbps data rate Channel 1:2.412GHz:
Delta 2 [T1]
RBW 300 kHz RF Att 40 dB
-5.50 dB VBW 300 kHz 6.01202405 MHz SWT 5 ms Unit dBm 1 1 [T1] -0.29 dBm A 2.41435471 GHz 2 [T1] -5.50 dB 6.01202405 MHz 2 1 [T1] -6.20 dB
-10.72144289 MHz 1MA Ref Lvl Ref Lvl 15 dBm 15 dBm 15 10 0 D1 -0.29 dBm D2 -6.29 dBm 1
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 Center 2.412 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Channel 6:2.437GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm 15 10 SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 17 of 77 FCC ID: TZI-WF1015 Delta 2 [T1]
RBW 300 kHz RF Att 40 dB
-5.45 dB VBW 300 kHz 11.12224449 MHz SWT 5 ms Unit dBm 1 [T1] -0.93 dBm A 2.43424449 GHz 2 [T1] -5.45 dB 11.12224449 MHz 2 1 [T1] -6.53 dB
-5.61122244 MHz 1MA 0 D1 -0.93 dBm D2 -6.93 dBm 1 1
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 0 D1 -1.58 dBm 1 D2 -7.58 dBm 1
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 Center 2.437 GHz 5 MHz/
Span 50 MHz Channel 11:2.462GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm 15 10 Marker 1 [T1]
RBW 300 kHz RF Att 40 dB
-1.58 dBm VBW 300 kHz 2.45924449 GHz SWT 5 ms Unit dBm 1 [T1] -1.58 dBm A 2.45924449 GHz 1 [T1] -6.39 dB
-5.61122244 MHz 2 [T1] -5.77 dB 2 11.12224449 MHz 1MA Center 2.462 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 18 of 77 FCC ID: TZI-WF1015 7.4 Maximum Peak Output Power Test Requirement:
FCC Part 15 C section 15.247
(b)(3) For systems using digital modulation in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz bands: 1 Watt. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b) (1), (b) (2), and (b) (3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Test Method:
ANSI C63.10: Clause 6.10 and KDB558074 (Power Output Option 2-Method #1). Test Status:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed Test Configuration:
below. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 19 of 77 FCC ID: TZI-WF1015 Test Procedure:
1. Remove the antenna from the EUT and then connect a low attention attenuation RF cable
(Cable loss =2.0dB) from the antenna port to the spectrum. 2. Set span to encompass the entire emission bandwidth (EBW) of the signal. 3. Set RBW = 1 MHz. 4. Set VBW 3 MHz. 5. Use sample detector mode if bin width (i.e., span/number of points in spectrum display) < 0.5 RBW. Otherwise use peak detector mode. 6. Use a video trigger with the trigger level set to enable triggering only on full power pulses. Transmitter must operate at full control power for entire sweep of every sweep. If the device transmits continuously, with no off intervals or reduced power intervals, the trigger may be set to free run. 7. Trace average 100 traces in power averaging mode. 8. Compute power by integrating the spectrum across the 26 dB EBW of the signal. The integration can be performed using the spectrum analyzers band power measurement function with band limits set equal to the EBW band edges or by summing power levels in each 1 MHz band in linear power terms. The 1 MHz band power levels to be summed can be obtained by averaging, in linear power terms, power levels in each frequency bin across the 1 MHz. 9. Measure the channel power of the test frequency with special test status. 10. Repeat until all the test status is investigated. 11. Report the worse case. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Test result:
SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 20 of 77 FCC ID: TZI-WF1015 Channel Frequency Measured Channel No.
(MHz) Power (dBm) Mode Data Rate Limit Result 1 2412 6 2437 802.11b 11 2462 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 14.40 14.27 15.13 16.18 13.32 13.44 14.31 15.37 11.92 12.13 12.96 14.09 1W(30dBm) Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 2412 SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 21 of 77 FCC ID: TZI-WF1015 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 17.22 17.74 17.26 17.38 17.53 17.74 17.65 17.78 16.59 16.92 16.41 16.17 16.74 16.76 16.71 17.14 16.00 15.91 15.72 15.52 16.02 16.15 16.07 16.18 Pass 6 2437 802.11g 11 2462 Remark: Level = Read Level + Cable Loss. Pre-test all possible combinations between available modulations, data rates; find the worst case on 802.11b mode with 11Mbps data rate and 802.11g mode with 54Mbps data rate The unit does meet the FCC requirements. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 22 of 77 FCC ID: TZI-WF1015 Result plot as follows:
802.11b mode with 11Mbps data rate Channel 1:2.412GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
6.24 dBm 2.41064729 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 1 1 [T1] 6.24 dBm A 2.41064729 GHz CH PWR 14.18 dBm CH BW 25.00000000 MHz 1SA C0 C0 Center 2.412 GHz 5 MHz/
Span 50 MHz Channel 6:2.437GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
5.58 dBm 2.43684970 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 1 1 [T1] 5.58 dBm A 2.43684970 GHz CH PWR 13.37 dBm CH BW 25.00000000 MHz 1SA C0 C0 Center 2.437 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Channel 11:2.462GHz:
SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 23 of 77 FCC ID: TZI-WF1015 Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
3.79 dBm 2.46164930 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 1 1 [T1] 3.79 dBm A 2.46164930 GHz CH PWR 12.09 dBm CH BW 25.00000000 MHz 1SA C0 C0 Center 2.462 GHz 5 MHz/
Span 50 MHz 802.11g mode with 54Mbps data rate Channel 1:2.412GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
6.05 dBm 2.41716032 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX 1 [T1] 6.05 dBm A 1 2.41716032 GHz CH PWR 15.78 dBm CH BW 25.00000000 MHz 1SA
-30
-40
-50
-60
-70
-80
-85 C0 C0 Center 2.412 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Channel 6:2.437GHz:
SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 24 of 77 FCC ID: TZI-WF1015 Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
4.85 dBm 2.44326253 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 1 [T1] 4.85 dBm A 1 2.44326253 GHz CH PWR 15.14 dBm CH BW 25.00000000 MHz 1SA C0 C0 Center 2.437 GHz 5 MHz/
Span 50 MHz Channel 11:2.462GHz:
Ref Lvl Ref Lvl 15 dBm 15 dBm Marker 1 [T1]
4.46 dBm 2.45633868 GHz RBW VBW SWT 1 MHz RF Att 40 dB 3 MHz 5 ms Unit dBm 15 10 0
-10
-20 1MAX
-30
-40
-50
-60
-70
-80
-85 1 1 [T1] 4.46 dBm A 2.45633868 GHz CH PWR 14.18 dBm CH BW 25.00000000 MHz 1SA C0 C0 Center 2.462 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 25 of 77 FCC ID: TZI-WF1015 7.5 Peak Power Spectral Density Test Requirement:
FCC Part 15 C section 15.247 Test Method:
Test Status:
(e) For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of paragraph (b) of this section. The same method of determining the conducted output power shall be used to determine the power spectral density. ANSI C63.10: Clause 6.11 and KDB558074 (PSD Option 1). Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed Test Configuration:
below. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 26 of 77 FCC ID: TZI-WF1015 Test Procedure:
1. Remove the antenna from the EUT and then connect a low attention attenuation RF cable
(cable loss =2.0 dB) from the antenna port to the spectrum analyzer or power meter. 2. Set the spectrum analyzer:
a) Set CENTER FREQUENCY = Frequency from Power Spectral Density Test Matrix (see 6.10.2) b) Set SPAN = 20 MHz (For devices with a nominal 40 MHz BW, 50 MHz span will be needed) c) Set REFERENCE LEVEL = 20 dBm d) Set ATTENUATION = 0 dB (add internal attenuation, if necessary) e) Set SWEEP TIME = Coupled f) Set RBW = 3 kHz g) Set VBW = 10 kHz h) Set DETECTOR = Peak i) Set MKR = Center Frequency j) Set TRACE = CLEAR WRITE Place the radio in continuous transmit mode. Set the TRACE to MAX HOLD, and after the trace stabilizes, the TRACE to VIEW. Set the marker on the peak of the signal and then adjust the center frequency of the spectrum analyzer to the marker frequency. After viewing the EUT waveform on the spectrum analyzer, perform the following spectrum analyzer functions to capture the trace:
Set SPAN = 300 kHz Set SWEEP TIME = 100 s Set TRACE = MAX HOLD Set MKR = PEAK SEARCH 3. Measure the Power Spectral Density of the test frequency with special test status. 4. Repeat until all the test status is investigated. 5. Report the worse case. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 27 of 77 FCC ID: TZI-WF1015 Channel Frequency No.
(MHz) Measured Peak Power Mode Data Rate Spectral Density Limit Result 1 6 11 1 6 11 2412 11 Mbps 2437 802.11b 11 Mbps 2462 2412 11 Mbps 54 Mbps 2437 802.11g 54 Mbps 2462 54 Mbps Test result: Level = Read Level + Cable Loss. The unit does meet the FCC requirements.
(dBm/3KHz)
-15.09
-15.34
-17.53
-17.22
-17.17
-18.63 8dBm/3KHZ Pass Pass Pass Pass Pass Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 28 of 77 FCC ID: TZI-WF1015 Result plot as follows:
802.11b mode with 11Mbps data rate Channel 1:2.412 GHz:
Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-17.09 dBm 2.41255982 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 1 [T1] -17.09 dBm A 2.41255982 GHz 1 1MA 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Center 2.412551102 GHz 30 kHz/
Span 300 kHz Channel 6:2.437 GHz:
Date: 23.AUG.2011 17:31:46 Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-17.34 dBm 2.43755962 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 [T1] -17.34 dBm A 2.43755962 GHz 1MAX 1 1MA Center 2.437651303 GHz 30 kHz/
Span 300 kHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Channel 11:2.462 GHz:
SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 29 of 77 FCC ID: TZI-WF1015 Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-19.53 dBm 2.46255962 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 1 [T1] -19.53 dBm A 2.46255962 GHz 1MA 20 10 0
-10 1MAX 1
-20
-30
-40
-50
-60
-70
-80 Center 2.462651303 GHz 30 kHz/
Span 300 kHz 802.11g mode with 54Mbps data rate Channel 1:2.412 GHz:
Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-19.22 dBm 2.40661453 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 1 [T1] -19.22 dBm A 2.40661453 GHz 1 1MA 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Center 2.406539078 GHz 30 kHz/
Span 300 kHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 30 of 77 FCC ID: TZI-WF1015 Channel 6:2.437 GHz:
Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-19.17 dBm 2.43137505 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 1 [T1] -19.17 dBm A 2.43137505 GHz 1 1MA 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Center 2.431338677 GHz 30 kHz/
Span 300 kHz Channel 11:2.462 GHz:
Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
-20.63 dBm 2.45636343 GHz RBW VBW SWT 3 kHz RF Att 50 dB 10 kHz 100 s Unit dBm 1 [T1] -20.63 dBm A 2.45636343 GHz 1 1MA 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Center 2.456438878 GHz 30 kHz/
Span 300 kHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 31 of 77 FCC ID: TZI-WF1015 7.5 Conducted Spurious Emissions Test Requirement:
FCC Part 15 C section 15.247
(d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating. the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Based on either an RF conducted or a radiated measurement. Provided the transmitter demonstrates compliance with the peak conducted power limits. ANSI C63.10: Clause 6.7 and KDB558074. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Test Method:
Test Status:
Test Configuration:
Test Procedure:
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum analyzer or power meter. 2. Set the spectrum analyzer: RBW=100 KHz, VBW = 300KHz. Sweep = auto; Detector Function =
Peak. Trace = Max Hold, Scan up through 10th harmonic. 3. Measure the Conducted Spurious Emissions of the test frequency with special test status. 4. Repeat until all the test status is investigated. 5. Report the worse case. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 32 of 77 FCC ID: TZI-WF1015 Result plot as follows:
802.11b mode with 11Mbps data rate Channel 1: 2.412 GHz 30 MHz to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-45.34 dBm VBW 300 kHz 998.05611222 MHz SWT 245 ms Unit dBm 1 [T1] -45.34 dBm A 998.05611222 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz Date: 24.AUG.2011 09:37:57 1 G to 5 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Delta 1 [T1]
RBW 100 kHz RF Att 40 dB
-40.67 dB VBW 300 kHz 577.15430862 MHz SWT 1 s Unit dBm 1 [T1] -2.57 dBm A 2.41082164 GHz 1 [T1] -40.67 dB 577.15430862 MHz 1MA 1 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:38:39 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 33 of 77 FCC ID: TZI-WF1015 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-42.95 dBm VBW 300 kHz 6.96392786 GHz SWT 5 s Unit dBm 1 [T1] -42.95 dBm A 6.96392786 GHz 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 1MA Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:39:06 Channel 6:2.437 GHz 30 M to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-45.62 dBm VBW 300 kHz 966.95390782 MHz SWT 245 ms Unit dBm 1 [T1] -45.62 dBm A 966.95390782 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz Date: 24.AUG.2011 09:42:15 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 34 of 77 FCC ID: TZI-WF1015 1 G to 5 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-2.79 dBm VBW 300 kHz 2.43486974 GHz SWT 1 s Unit dBm 1 [T1] -2.79 dBm A 2.43486974 GHz 1 [T1] -41.51 dB 617.23446894 MHz 1MA 1 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:42:56 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-42.32 dBm VBW 300 kHz 6.56312625 GHz SWT 5 s Unit dBm 1 [T1] -42.32 dBm A 6.56312625 GHz 1MA 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:43:29 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 35 of 77 FCC ID: TZI-WF1015 Channel1 1:2.462 GHz 30 M to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-45.57 dBm VBW 300 kHz 988.33667335 MHz SWT 245 ms Unit dBm 1 [T1] -45.57 dBm A 988.33667335 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz 1 G to 5 GHz Date: 24.AUG.2011 09:48:20 Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-5.35 dBm VBW 300 kHz 2.45891784 GHz SWT 1 s Unit dBm 1 1 [T1] -5.35 dBm A 2.45891784 GHz 1 [T1] -38.59 dB 1.24248497 GHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:48:51 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 36 of 77 FCC ID: TZI-WF1015 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-43.26 dBm VBW 300 kHz 6.60320641 GHz SWT 5 s Unit dBm 1 [T1] -43.26 dBm A 6.60320641 GHz 1MA 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:49:19 802.11g mode with 54Mbps data rate Channel 1: 2.412 GHz 30 M to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-44.96 dBm VBW 300 kHz 941.68336673 MHz SWT 245 ms Unit dBm 1 [T1] -44.96 dBm A 941.68336673 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz Date: 24.AUG.2011 09:39:58 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 37 of 77 FCC ID: TZI-WF1015 1 G to 5 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Delta 1 [T1]
RBW 100 kHz RF Att 40 dB
-37.76 dB VBW 300 kHz 336.67334669 MHz SWT 1 s Unit dBm 1 [T1] -5.42 dBm A 2.40280561 GHz 1 [T1] -37.76 dB 336.67334669 MHz 1MA 1 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:40:28 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-41.57 dBm VBW 300 kHz 6.64328657 GHz SWT 5 s Unit dBm 1 [T1] -41.57 dBm A 6.64328657 GHz 1MA 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:41:22 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 38 of 77 FCC ID: TZI-WF1015 Channel 6: 2.437 GHz 30 M to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-45.50 dBm VBW 300 kHz 951.40280561 MHz SWT 245 ms Unit dBm 1 [T1] -45.50 dBm A 951.40280561 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz Date: 24.AUG.2011 09:46:19 1 G to 5 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-5.78 dBm VBW 300 kHz 2.44288577 GHz SWT 1 s Unit dBm 1 [T1] -5.78 dBm A 2.44288577 GHz 1 [T1] -38.36 dB 577.15430862 MHz 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 1 1 1MA Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:46:55 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 39 of 77 FCC ID: TZI-WF1015 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-42.32 dBm VBW 300 kHz 6.60320641 GHz SWT 5 s Unit dBm 1 [T1] -42.32 dBm A 6.60320641 GHz 1MA 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:47:20 Channel 11: 2.462 GHz 30 M to 1 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-45.02 dBm VBW 300 kHz 898.91783567 MHz SWT 245 ms Unit dBm 1 [T1] -45.02 dBm A 898.91783567 MHz 1MA 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 97 MHz/
Stop 1 GHz Date: 24.AUG.2011 09:50:21 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 40 of 77 FCC ID: TZI-WF1015 1 G to 5 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-6.95 dBm VBW 300 kHz 2.45891784 GHz SWT 1 s Unit dBm 1 [T1] -6.95 dBm A 2.45891784 GHz 1 [T1] -35.93 dB 232.46492986 MHz 1MA 1 1 20 10 0
-10 1MAX
-20
-30
-40
-50
-60
-70
-80 Start 1 GHz 400 MHz/
Stop 5 GHz Date: 24.AUG.2011 09:51:07 5 G to 25 GHz Ref Lvl Ref Lvl 20 dBm 20 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-41.49 dBm VBW 300 kHz 6.60320641 GHz SWT 5 s Unit dBm 1 [T1] -41.49 dBm A 6.60320641 GHz 1MA 20 10 0
-10 1MAX
-20
-30
-40 1
-50
-60
-70
-80 Start 5 GHz 2 GHz/
Stop 25 GHz Date: 24.AUG.2011 09:51:36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 41 of 77 FCC ID: TZI-WF1015 7.6 Radiated Spurious Emissions Test Requirement:
FCC Part 15 C section 15.247
(d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating. The radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that Contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, and provided the transmitter demonstrates compliance with the peak conducted power limits. ANSI C63.10: Clause 6.4, 6.5 and 6.6 & KDB558074 Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Test Method:
Test Status:
Detector:
For PK value:
RBW = 1 MHz for f 1 GHz, 100 kHz for f < 1 GHz VBW RBW Sweep = auto Detector function = peak Trace = max hold For AV value:
RBW = 1 MHz for f 1 GHz, 100 kHz for f < 1 GHz VBW =10Hz Sweep = auto Detector function = peak Trace = max hold 15.209 Limit:
40.0 dBV/m between 30MHz & 88MHz 43.5 dBV/m between 88MHz & 216MHz 46.0 dBV/m between 216MHz & 960MHz 54.0 dBV/m above 960MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 42 of 77 FCC ID: TZI-WF1015 Test Configuration:
1) 30 MHz to 1 GHz emissions:
2) 1 GHz to 40 GHz emissions:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 43 of 77 FCC ID: TZI-WF1015 Test Procedure: The receiver was scanned from 30MHz to 25GHz.When an emission was found, the table was rotated to produce the maximum signal strength. An initial pre-scan was performed for in peak detection mode using the receiver. The EUT was measured for both the Horizontal and Vertical polarities and performed a pre-test three orthogonal planes. For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115%
of the nominal rated supply voltage. The worst case emissions were reported. From 30MHz to 1GHz, read the Quasi-Peak field strength of the emissions with receiver QP detector RBW=120KHz. Above 1GHz, read the Peak field strength and Average field strength. Read the Peak field strength through RBW=1MHz,VBW=3MHz in spectrum analyzer setting;
Read the Average field strength through RBW=1MHz,VBW=10Hz in spectrum analyzer setting;
While maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the dwell time per channel of the hopping signal is less than 100 ms, then the average field strength reading obtained with the 10 Hz VBW may be further adjusted by a "duty cycle correction factor", derived from 20log(dwell time/100 ms), in an effort to demonstrate compliance with the 15.209 limit. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 44 of 77 FCC ID: TZI-WF1015 7.6.1 Harmonic and other spurious emissions 7.6.1.1 802.11b mode with 11Mbps data rate Test at Channel 1 (2.412 GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 45 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 46 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.54 36.48 31.54 36.48 Frequency
(MHz) 4824.000 7236.000 4824.000 7236.000 Cable loss
(dB) 8.81 12.32 8.81 12.32 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 45.41 47.68 47.52 46.06 51.46 62.18 53.57 60.56 Limit Antenna
(dBV/m) polarization 74 74 74 74 V V H H Average Measurement:
Frequency
(MHz) 4824.000 7236.000 4824.000 7236.000 Antenna factors
(dB/m) 31.54 36.48 31.54 36.48 Cable loss
(dB) 8.81 12.32 8.81 12.32 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 28.01 28.70 27.20 28.05 34.06 43.20 33.25 42.55 Limit Antenna
(dBV/m) polarization 54 54 54 54 V V H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 47 of 77 FCC ID: TZI-WF1015 Test at Channel6 (2.437 GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 48 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 49 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.57 36.50 31.57 36.50 Frequency
(MHz) 4874.00 7311.00 4874.00 7311.00 Cable loss
(dB) 8.63 12.23 8.63 12.23 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 44.10 46.63 45.89 47.62 50.00 61.06 51.79 62.05 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 V V H H Average Measurement:
Antenna factors
(dB/m) 31.57 36.50 31.57 36.50 Cable loss
(dB) 8.63 12.23 8.63 12.23 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 25.77 25.97 31.03 28.13 31.67 40.40 36.93 42.56 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 V V H H Frequency
(MHz) 4874.00 7311.00 4874.00 7311.00 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 50 of 77 FCC ID: TZI-WF1015 Test at Channel11 (2.462 GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 51 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 52 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.62 36.53 31.62 36.53 Frequency
(MHz) 4924.00 7386.00 4924.00 7386.00 Cable loss
(dB) 8.45 12.19 8.45 12.19 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 44.31 46.78 46.57 45.47 50.08 61.20 52.34 59.89 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 V V H H Average Measurement:
Frequency
(MHz) 4924.00 7386.00 4924.00 7386.00 Antenna factors
(dB/m) 31.62 36.53 31.62 36.53 Cable loss
(dB) 8.45 12.19 8.45 12.19 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 26.05 24.04 26.23 25.13 31.82 38.46 32.00 39.55 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 V V H H The field strength is calculated by adding the Antenna Factor. Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Loss Preamplifier Factor. As shown in Section, for frequencies above 1000 MHz. the above field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. No any other emissions level which are attenuated less than 20dB below the limit. According to 15.31(o), The amplitude of spurious emissions from intentional radiators and emissions from unintentional radiators which are attenuated more than 20 dB below the permissible value need not be reported unless specifically required elsewhere in this Part. Hence there no other emissions have been reported. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 53 of 77 FCC ID: TZI-WF1015 7.6.1.2 802.11g mode with 54Mbps data rate Test at Channel 1 (2.412 GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 54 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 55 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.54 36.48 31.54 36.48 Frequency
(MHz) 4824.00 7236.00 4824.00 7326.00 Cable loss
(dB) 8.81 12.32 8.81 12.32 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 45.46 44.97 44.87 45.57 51.51 59.74 50.92 60.07 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 V V H H Average Measurement:
Frequency
(MHz) 4824.00 7236.00 4824.00 7326.00 Antenna factors
(dB/m) 31.54 36.48 31.54 36.48 Cable loss
(dB) 8.81 12.32 8.81 12.32 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 25.90 24.21 25.99 25.32 31.95 38.71 32.04 39.82 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 V V H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 56 of 77 FCC ID: TZI-WF1015 Test at Channel 6 (2.437GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 57 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 58 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.57 36.50 31.57 36.50 Frequency
(MHz) 4874.00 7311.00 4874.00 7311.00 Cable loss
(dB) 8.63 12.23 8.63 12.23 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 44.69 45.99 45.80 45.16 50.59 60.42 51.70 59.59 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 V V H H Average Measurement:
Antenna factors
(dB/m) 31.57 36.50 31.57 36.50 Cable loss
(dB) 8.63 12.23 8.63 12.23 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 26.80 27.03 25.90 25.80 32.70 41.46 31.80 40.23 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 V V H H Frequency
(MHz) 4874.00 7311.00 4874.00 7311.00 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 59 of 77 FCC ID: TZI-WF1015 Test at Channel 11 (2.462 GHz) in transmitting status 30 MHz~1 GHz Spurious Emissions .Quasi-Peak Measurement Vertical:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 60 of 77 FCC ID: TZI-WF1015 Horizontal:
Peak scan Level (dBV/m) Quasi-peak measurement This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 61 of 77 FCC ID: TZI-WF1015 1~25 GHz Harmonics & Spurious Emissions. Peak & Average Measurement Peak Measurement:
Antenna factors
(dB/m) 31.62 36.53 31.62 36.53 Frequency
(MHz) 4924.00 7386.00 4924.00 7386.00 Cable loss
(dB) 8.45 12.19 8.45 12.19 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 46.40 46.01 45.53 46.34 52.17 60.43 51.30 60.76 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 V V H H Average Measurement:
Frequency
(MHz) 4924.00 7386.00 4924.00 7386.00 Antenna factors
(dB/m) 31.62 36.53 31.62 36.53 Cable loss
(dB) 8.45 12.19 8.45 12.19 Preamp Reading Emission factor Level Level
(dB) 34.30 34.30 34.30 34.30
(dBV)
(dBV/m) 26.96 29.01 25.23 26.86 32.73 43.43 31.00 41.28 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 V V H H The field strength is calculated by adding the Antenna Factor. Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Preamplifier Factor. No any other emissions level which are attenuated less than 20dB below the limit. According to 15.31(o), The amplitude of spurious emissions from intentional radiators and emissions from unintentional radiators which are attenuated more than 20 dB below the permissible value need not be reported unless specifically required elsewhere in this Part. Hence there no other emissions have been reported. Remark:
1) .For this intentional radiator operates below 25 GHz. The spectrum shall be investigated to the tenth harmonics of the highest fundamental frequency. And above the third harmonic of this intentional radiator, the disturbance is very low. So the test result only displays to 3rd harmonic. 2). As shown in Section, for frequencies above 1000 MHz. the above field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. 3). The test only perform the EUT in transmitting status since the test frequencies were over 1GHz only required transmitting status. Test result: The unit does meet the FCC requirements. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 62 of 77 FCC ID: TZI-WF1015 7.6.2 Radiated Emissions which fall in the restricted bands Test Requirement:
FCC Part 15 C section 15.247 defined in Section 15.205(a), must also comply with the radiated emission
(d) In addition, radiated emissions which fall in the restricted bands, as Test Method:
Test Status:
Test site:
Limit:
limits specified in Section 15.209(a) (see Section 15.205(c)). ANSI C63.10: Clause 6.4, 6.5 and 6.6 & KDB558074 Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Measurement Distance: 3m (Semi-Anechoic Chamber) 40.0 dBV/m between 30MHz & 88MHz;
43.5 dBV/m between 88MHz & 216MHz;
46.0 dBV/m between 216MHz & 960MHz;
54.0 dBV/m above 960MHz. Detector:
For PK value:
RBW = 1 MHz for f 1 GHz, 100 kHz for f < 1 GHz VBW RBW Sweep = auto Detector function = peak Trace = max hold For AV value:
RBW = 1 MHz for f 1 GHz, 100 kHz for f < 1 GHz VBW =10Hz Sweep = auto Detector function = peak Trace = max hold This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 63 of 77 FCC ID: TZI-WF1015 Section 15.205 Restricted bands of operation.
(a) Except as shown in paragraph (d) of this section. only spurious emissions are permitted in any of the frequency bands listed below:
MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 10.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 -
2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 13.36 - 13.41 322 - 335.4 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 64 of 77 FCC ID: TZI-WF1015 Test Result:
7.6.2.1 802.11b mode with 11Mbps data rate Test at Channel 1 (2.412 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 46.32 47.43 48.10 47.98 47.32 47.72 48.05 47.28 45.13 46.13 46.96 46.85 46.13 46.42 46.91 46.15 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 26.12 27.00 29.86 30.29 26.99 28.80 29.30 29.07 24.93 25.70 28.72 29.16 25.80 27.50 28.16 27.94 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 65 of 77 FCC ID: TZI-WF1015 Test at Channel 6 (2.437 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 46.92 47.68 46.29 48.39 46.69 49.71 47.29 46.99 45.73 46.38 45.15 47.26 45.50 48.41 46.15 45.86 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 30.31 30.90 30.20 29.37 25.70 27.30 26.34 24.52 29.12 29.60 29.06 28.24 24.51 26.00 25.20 23.39 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 66 of 77 FCC ID: TZI-WF1015 Test at Channel 11 (2.462 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 46.04 46.13 46.50 46.27 46.45 47.00 47.89 47.88 44.85 44.83 45.36 45.14 45.26 45.70 46.75 46.75 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 26.44 26.46 26.20 26.94 29.15 27.43 27.25 27.38 25.25 25.16 25.06 25.81 27.96 26.13 26.11 26.25 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 67 of 77 FCC ID: TZI-WF1015 7.6.2.2 802.11g mode with 54Mbps data rate Test at Channel 1 (2.412 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 47.63 47.31 46.75 49.17 46.97 46.12 46.50 46.61 46.44 46.01 45.61 48.04 45.78 44.82 45.36 45.48 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 27.27 27.11 26.46 28.70 27.54 26.41 26.98 26.80 26.08 25.81 25.32 27.57 26.35 25.11 25.84 25.67 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 68 of 77 FCC ID: TZI-WF1015 Test at Channel 6 (2.437 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 46.03 46.17 46.88 47.41 47.05 47.00 46.68 47.77 44.84 44.87 45.74 46.28 45.86 45.70 45.54 46.64 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 26.98 26.72 26.36 26.59 27.90 27.70 26.46 26.44 25.79 25.42 25.22 25.46 26.71 26.40 25.32 25.31 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 69 of 77 FCC ID: TZI-WF1015 Test at Channel 11 (2.462 GHz) in transmitting status Peak Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Average Measurement:
Frequency
(MHz) Antenna factors
(dB/m) 2310.000 2390.000 2483.500 2500.000 2310.000 2390.000 2483.500 2500.000 27.93 27.61 27.55 27.55 27.93 27.61 27.55 27.55 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Cable loss
(dB) 5.98 6.14 6.30 6.30 5.98 6.14 6.30 6.30 Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 47.02 47.13 47.80 47.17 47.27 48.10 49.16 48.24 45.83 45.83 46.66 46.04 46.08 46.80 48.02 47.11 Limit Antenna
(dBV/m) polarization 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Vertical V V V Horizontal H H H Preamp Reading Emission factor Level Level
(dB) 35.10 35.05 34.99 34.98 35.10 35.05 34.99 34.98
(dBV)
(dBV/m) 27.24 27.53 27.70 27.04 27.15 26.20 27.54 27.36 26.05 26.23 26.56 25.91 25.96 24.90 26.40 26.23 Limit Antenna
(dBV/m) polarization 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 Vertical V V V Horizontal H H H This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 70 of 77 FCC ID: TZI-WF1015 7.7 Band Edges Requirement Test Requirement:
FCC Part 15 C section 15.247
(d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating. The radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Based on either an RF conducted or a radiated measurement. Provided the transmitter demonstrates compliance with the peak conducted power limits. Frequency Band:
2400 MHz to 2483.5 MHz Test Method:
Test Status:
Test Configuration:
Test Procedure:
ANSI C63.10: Clause 6.9 & KDB558074. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum analyzer or power meter. 2. Set RBW=100 kHz , VBW=100KHz ,suitable frequency span including 100 kHz bandwidth from band edge.. 3. Measure the Conducted Spurious Emissions and Radiated Emissions of the test frequency with special test status. 4. Repeat until all the test status is investigated. 5. Report the worse. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 71 of 77 FCC ID: TZI-WF1015 Test result with plots as follows:
The band edges was measured and recorded Result:
The Lower Edges attenuated more than 20dB. The Upper Edges attenuated more than 20dB. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 72 of 77 FCC ID: TZI-WF1015 Result plot as follows:
802.11b mode with 11 Mbps data rate Channel1: 2.412 GHz Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-2.85 dBm VBW 300 kHz 2.41257936 GHz SWT 12.5 ms Unit dBm 17 10 0
-10 D1 -2.85 dBm 1 [T1] -2.85 dBm A 2.41257936 GHz 2 [T1] -22.77 dBm 2.40416253 GHz 1 1MAX
-20 D2 -22.85 dBm 2 1MA
-30
-40
-50
-60
-70
-80
-83 Center 2.3979 GHz 5 MHz/
Span 50 MHz Channel 11: 2.462 GHz Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-5.20 dBm VBW 300 kHz 2.46071944 GHz SWT 12.5 ms Unit dBm 17 10 0
-10 D1 -5.2 dBm 1 1 [T1] -5.20 dBm A 2.46071944 GHz 2 [T1] -25.52 dBm 2.47003808 GHz 1MAX
-20 D2 -25.2 dBm 2 1MA
-30
-40
-50
-60
-70
-80
-83 Center 2.476 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 73 of 77 FCC ID: TZI-WF1015 Result plot as follows:
802.11g mode with 54Mbps data rate Channel 1: 2.412 GHz Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-4.96 dBm VBW 300 kHz 2.40576573 GHz SWT 12.5 ms Unit dBm 1 [T1] -4.96 dBm A 2.40576573 GHz 2 [T1] -25.55 dBm 2.40265952 GHz 1 2 1MA 17 10 0
-10 D1 -4.96 dBm 1MAX
-20 D2 -24.96 dBm
-30
-40
-50
-60
-70
-80
-83 Center 2.3979 GHz 5 MHz/
Span 50 MHz Channel 11: 2.462 GHz Ref Lvl Ref Lvl 17 dBm 17 dBm Marker 1 [T1]
RBW 100 kHz RF Att 40 dB
-6.56 dBm VBW 300 kHz 2.45570942 GHz SWT 12.5 ms Unit dBm 17 10 0
-10 1 D1 -6.56 dBm 1MAX
-20 D2 -26.56 dBm 2 1 [T1] -6.56 dBm A 2.45570942 GHz 2 [T1] -28.30 dBm 2.47144088 GHz 1MA
-30
-40
-50
-60
-70
-80
-83 Center 2.476 GHz 5 MHz/
Span 50 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 74 of 77 FCC ID: TZI-WF1015 7.8 Conducted Emissions at Mains Terminals 150 kHz to 30MHz Test Requirement:
FCC Part 15 C section 15.207 Test Method:
ANSI C63.10: Clause 6.2 & KDB558074. Frequency Range:
150 kHz to 30 MHz Detector:
Test Limit Peak for pre-scan (9kHz Resolution Bandwidth) Limits for conducted disturbance at the mains ports of class B Frequency Range Class B Limit (dBuV)
(MHz) 0.15 to 0.50 0.50 to 5 5 to 30 Quasi-peak 66 to 56 56 60 Average 56 to 46 46 50 NOTE 1 The limit decreases linearly with the logarithm of the frequency in the range 0,15 MHz to 0,50 MHz. EUT Operation:
Test in normal operating mode. For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Test Configuration:
SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 75 of 77 FCC ID: TZI-WF1015 Test procedure:
1. The mains terminal disturbance voltage test was conducted in a shielded room. 2. The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization Network) which provides a 50/50H + 5 linear impedance. The power cables of all other units of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect multiple power cables to a single LISN provided the rating of the LISN was not exceeded. 3. The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane. And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane, but separated from metallic contact with the ground reference plane by 0.1m of insulation. 4. The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0,4 m from the vertical ground reference plane. The vertical ground reference plane was bonded to the horizontal ground reference plane. The LISN 1 was placed 0,8 m from the boundary of the unit under test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and associated equipment was at least 0,8 m from the LISN 2. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 76 of 77 FCC ID: TZI-WF1015 7.8.1 Measurement Data An initial pre-scan was performed on the live and neutral lines with peak detector. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission were detected. For EUT the communicating was worst case mode. The following Quasi-Peak and Average measurements were performed on the EUT:
Neutral Line Level(dBV) Measure data:
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM110800312101 Page: 77 of 77 FCC ID: TZI-WF1015 Live Line Level (dBV) Measure result:
--End of Report--
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-11-02 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-11-02
|
||||
1 | Applicant's complete, legal business name |
Arts Electronics Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0014659635
|
||||
1 | Physical Address |
NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY, CHANGAN TOWN
|
||||
1 |
NO. 1, SHANGXING LU, SHANGJIAO COMMUNITY
|
|||||
1 |
DONGGUAN CITY, GUANGDONG PROVINCE,, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TZI
|
||||
1 | Equipment Product Code |
WF1015
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** L******
|
||||
1 | Title |
Safety Engineer
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 | Fax Number |
+86-7********
|
||||
1 |
s******@arts1970.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
D****** H********
|
||||
1 | Physical Address |
198 KEZHU Road, Scientech Park Guangzhou Economic
|
||||
1 |
Guangzhou, 510663
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86 2********
|
||||
1 | Fax Number |
+86 2********
|
||||
1 |
D******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
M****** L******
|
||||
1 | Physical Address |
198 KEZHU Road, Scientech Park Guangzhou Economic
|
||||
1 |
Guangzhou, 510663
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86 2********
|
||||
1 | Fax Number |
+86 2********
|
||||
1 |
M******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Internet radio with FM and alarm clock | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd
|
||||
1 | Name |
J****** C******
|
||||
1 | Telephone Number |
860-2********
|
||||
1 | Fax Number |
860-2********
|
||||
1 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0600000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC