FCC ID: 2AVVCT40 RF Card Reader

Arvratech Co.,Ltd. RF Card Reader (T-40) product feature function 2 www.arvratech.com Using an access management system using a short-range network (LAN), UTP Cable and TCP/IP protocols it can be applied to the existing network , so it is easy to scalability, More reliability and faster speeds, as well as manage and monitor over the network It is possible to secure worker's work efficiency and safety, such as monitoring the user's location using Bluetooth. Easy and capable of implementing various functions It can be interlocked with a smart phone, and convenient entry / exit through proximity communication with a smartphone without a separate card (key). access Control functions can be implemented Support for various methods of operation depending on how access, absenteeism, and crime prevention are established. Touch Screen enables easy setup and management of equipment and speeds processing It has a built-in waterproof cap, so it can be installed anywhere regardless of the installation location. 3 Sortation CPU OS LCD Memory Video/Cam Interface Sound RF BLE Input / Output Communication Power Size Temperature Humidity www.arvratech.com Specification Arm9 240Mh Nuvoton MPU + PIC 32Bit MCU (Dual) Embedded LINUX 4 TFT Color LCD / capacitance of capacitance Glass touch screen 64MB RAM + 128MB Not supported USB Port 1 Speaker Voice Support 13.56Mhz / Mifare Classic Compatible unserviceability 4 input / 1 Lock ,1 Relay Output LAN(TCP/IP Ethernet) DC 5 V 157mmX68mm /Width : 23mm~35mm Reader :-25 ~ 50C /5%

5% ~ 90% Noncondensing relative humidity 4 the front part the rear part www.arvratech.com NO Name content a remarks column LED Power All Actions status check RF Card Recognition Tamper Sensor crime prevention Rock Card Reader LCD communication terminal Speaker USB terminal power terminal Data and Communications Voice guidance Data Down power supply 12V/300mA Input RS485/232 RS232 Ouput1/2 POWER (12V~24V) 5 www.arvratech.com NO Sortation Mogjeog a remarks column entrance door EXIT Terminal Communication RS485 Communication Input SD Card LAN Ouput Power Supply RS232 USB Terminal Set-Up LAN connection entrance door Lock Power Data Down Data Down Debug Terminal 12v~24v Debug Terminal Debug Terminal 6 Function category NO 1 broadcasting function 2 digital amplifier 3 crime prevention 4 Power saving mode 5 Low-Stage Surveillance power monitoring, reset chip/Power displayr 6 Watchdog function 7 Disconnect RF Antenna 8 update function X X Supported Supported Supported X Network/USB/ Bluetooth /Updateable Speedgate, access control, locationtracking, fire reception, ipleader a five-nation language (Korean, English, Escape year, Arabic, Chinese) a million cases 5,000 9 Operation mode 10 language support 11 Save Logs 12 Save Image Log 13 File System Management Supported 14 certification method 15 Camera 16 IP Phone(Video call) 17 Save Image 18 Smart Phone 19 Bluetooth 20 LCD 21 USB Card, password, SAM Supported Supported Supported Supported Supported Touch Screen Supported www.arvratech.com a remarks column Resolution:1280x720(HD) Can be set on mobile phone 7 www.arvratech.com fixed use Screw PVC fixed anchor Braket fixed use Screw connecting cable 5Pin Input/6Pin Output/5Pin T-40 Terminal Braket rear waterproof cap Diode 8

- Input 1 2 3 4 5 Pin 1 2 3 4 5 Name GND EXIT IN 1 IN 2 Color Purple Black Yellow Orange IN 3 (1CH > Fire) chestnut color

- Output(Relay) 6 5 4 3 2 1 Pin Name 6 5 4 3 2 1 NO 2 (Relay) COM 2 (Relay) NC 2 (Relay) NO 1 (Lock) COM 1 (Lock) NO 1 (Lock) Color Green Yellow Black White Purple Red www.arvratech.com 9 www.arvratech.com Check the installation location by considering the following conditions, and obtain user consent if necessary. This product is installed indoors in principle, and when installed outdoors, do not expose the terminal to direct sunlight, snow, or rain. Connecting cables should not be exposed to the outside, and reclamation is recommended. If reclamation is not possible due to the installation environment, the user's consent must be obtained prior to installation. Please receive and install it. Power shall be applied after all the wires are completed, and no wires shall be dismantled or further connected when the power is applied. It can be used more efficiently by installing it at an appropriate height that is easy for users to use and at a location close to the door. 10 www.arvratech.com Braket fixed use Fiast stage Secure the metal bracket with a securing screw on the wall. Metal bracket for fixing wall parts Second stage Clip the T-40 terminal onto the bracket fixed to the wall. T-40 terminal third stage Tighten the bottom of the T-40 terminal with the bracket and the set screw. 11 www.arvratech.com Reader Default Settings

- The default setting can be automatically downloaded through the initial network master connection for the corresponding channel's device number, or the access control-related setting can be done by the reader after the network connection. Reader Initial Menu

- Enter Menu and Use Touch / Touch Scroll Behavior Touch Tab Behavior setting Firmware:1.61 Unit Address:Self-2 master device:Not connected input voltage:12V 4.1V Cancellation Completion setting Use access control Network Enter Password Device Settings System screen slide Screen Check

/Settings tab password '1111'

Enter Tab Initialization Plane upper To go 12 www.arvratech.com Reader Network > Slave address

- The reader initially sets the instrument address (slave address) given by the master. setting Use access control Network Device Settings System Network Slave address IP Address setting Master Setting Server Setting Ping Test Network Server Setting Self Channel 2 Server address Self Channel 2 Cancellation Completion Network Slave address IP Address setting Master Setting Server Setting Ping Test Network Setting Slave address Setting Slave address Setting

/ Save by taping Complete tab Leave previous step 13 www.arvratech.com Cancellation Completion Subnet mask Completion Cancellation Cancellation Completion IP Address Gateway Reader : Network > IP Address setting

- The reader sets the assigned unique IP. Network Slave address IP Address setting Master Setting Server Setting Ping Test IP Address setting Receiving Addresses IP Address Subnet mask Gateway DNA Server IP Address setting Receiving Addresses IP Address Subnet mask Gateway DNA Server Network IP Address setting Receiving Addresses Revocation

/ check/ Fixed IP setting IP Address, Subnet mask, Gateway setting

/Tap in the address window to move the cursor. /* = . Used 14 www.arvratech.com Reader Door usage status (In/Out bidirectional selection)

- Depending on the installation environment of the leader, when installing the door in both directions, the leader inside the exit is determined not to use the door. setting Use access control Network Device Settings System access control access control Slave address Slave address Model name Credential Input and output entrance door Crime prevention mode Certification results Model name Credential Input and output entrance door Crime prevention mode Certification results Temper(Separation warning) Temper(Separation warning) access control : entrance door Use on and off on the Switch tab to select whether or not to use.. 15 www.arvratech.com Reader Setting the door Lock Relay polarity Setting setting Use access control Network access control Device Settings Slave address System Model name Credential Input and output entrance door Crime prevention mode Certification results entrance door Door Lock Relay Door Lock Relay Address Address Main Reader Door Lock Relay Exit button input Door Lock Relay auxiliary rock door opening time Allocation Door Lock polarity Allocation polarity Normal reversal Cancellationy Temper(Separation warning) Lock Type entrance door>Door Lock Relay> polarity > reversal : Lock, at the time of installation NOIt's a runoff and turns the polarity of the leader into a reversal 16 www.arvratech.com Reader entrance door Seeting setting Use access control Network access control Device Settings Slave address System entrance door entrance door entrance door Main Reader Main Reader Main Reader Door Lock Relay Door Lock Relay Door Lock Relay Model name Exit button input Exit button input Exit button input Credential Input and output entrance door Crime prevention mode Certification results Temper(Separation warning) Door Lock Relay Door Lock Relay Door Lock Relay auxiliary rock auxiliary rock auxiliary rock door opening time door opening time door opening time Lock Type Lock Type Lock Type entrance door Setting : Exit button, door condition detection, door opening time, lock type setting for door setting It's possible.. 17 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Label photo RF Card Reader MODEL : T-40 FCC ID : 2AVVCT40 Power source : AC 120 V Manufacturer : ARVRATECH Co., Ltd This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Model No.: T-40 Page 1 of 1

ARVRATECH Co., Ltd 807, housD The SkyValley 2-Cha, Beoman-ro 1142, Geumcheon-gu, Seoul, South Korea

+82-2-2027-2027 Date: Oct 14, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AVVCT40 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT Exhibit Type Part List Schematics Diagram(s) Operation description Block diagram File Name Part List.pdf Schematic.pdf Operation description.pdf Block diagram.pdf And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, President / Su Hyeon Choe ARVRATECH Co., Ltd

ARVRATECH Co., Ltd 807, housD The SkyValley 2-Cha, Beoman-ro 1142, Geumcheon-gu, Seoul, South Korea

+82-2-2027-2027 Date: Oct 14, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID : 2AVVCT40 To whom it may concern:

I, the undersigned, hereby authorize Young-Jin, Lee of KES Co., Ltd. and hereafter referred to as KES Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Young-Jin, Lee of KES Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KES Co., Ltd. as our agent, we still recognize that we are responsible to:

a) b) c) d) e) f) g) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ARVRATECH Co., Ltd 807, housD The SkyValley 2-Cha, Beoman-ro 1142, Geumcheon-gu, Seoul, South Korea

+82-2-2027-2027 h) i) j) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, President / Su Hyeon Choe ARVRATECH Co., Ltd REMARK:

1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. 2. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

ARVRATECH Co., Ltd 807, housD The SkyValley 2-Cha, Beoman-ro 1142, Geumcheon-gu, Seoul, South Korea Tel: +82-2-2027-2027 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: Oct 13, 2021 Regarding FCC Application (FCC ID: 2AVVCT40) We, ARVRATECH Co., Ltd, declare that the device does not support LE function by blocking the software. The firmware setting is not accessible by end users and/or unauthorized 3rd parties. Signature:

President / Su Hyeon Choe ARVRATECH Co., Ltd