all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
USERS MANUAL | Users Manual | 2.39 MiB | / January 02 2007 | |||
1 2 3 |
|
USERS MANUAL 1 | Users Manual | 388.50 KiB | ||||
1 2 3 |
|
USERS MANUAL 2 | Users Manual | 562.20 KiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Attestation Statements | / January 02 2007 | ||||||
1 2 3 | Cover Letter(s) | / January 02 2007 | ||||||
1 2 3 | RF Exposure Info | / January 02 2007 | ||||||
1 2 3 | Test Setup Photos | / January 02 2007 | ||||||
1 2 3 | External Photos | July 02 2007 / January 02 2007 | ||||||
1 2 3 | ID Label/Location Info | July 02 2007 / January 02 2007 | ||||||
1 2 3 | Test Setup Photos | July 02 2007 / January 02 2007 | ||||||
1 2 3 | Test Report | / January 02 2007 | ||||||
1 2 3 | Test Report | / January 02 2007 | ||||||
1 2 3 | Test Report | / January 02 2007 | ||||||
1 2 3 | Test Report | / January 02 2007 |
1 2 3 | USERS MANUAL | Users Manual | 2.39 MiB | / January 02 2007 |
XL340 Product photo www.philips.com/support EN Telephone WARNING Never use non-rechargeable batteries !
Table of contents Important Safety Instructions 3 3.4 Display icons 1 Environment and safety 1.1 Safety information 1.2 Power requirements 1.3 Battery requirements 1.4 Telephone connection 1.5 Environmental care 1.6 Precautions 2 Important information 2.1 For your safety 2.2 Telephone connection 2.3 Need help?
2.4 Safety information 2.5 Conformity 2.6 Safety precautions 2.7 Digital security system 3 Your phone 3.1 Whats in the box 3.2 Overview of the phone 3.3 Overview of the base 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 8 9 9 10 10 10 4 Getting started 4.1 Connect the base 4.2 Connect the charger 4.3 Insert the batteries in the handset 10 4.4 Charge batteries 4.5 Using GAP standard compliance 4.6 Standby mode 4.7 Verify the signal 5 Using your phone 5.1 Call 5.2 Answer a call 5.3 Loudspeaker phone 5.4 Adjust the audio volume 5.5 End a call 5.6 Make a second call 5.7 Answer a second call 5.8 Conference call 5.9 Use intercom 5.10 Text or number entry 10 11 11 11 12 12 12 12 12 12 13 13 13 13 13 Table of contents 1 Table of contents 6 Use more of your phone 6.1 Phonebook memory 6.2 Personalizing your phone 6.3 Advanced features 6.4 Use the headset Default settings 7 8 15 15 15 16 19 20 11.9 Privacy 11.10 Additional Information 11.11 Terminal Equipment 11.12 Radio Equipment 11.13 Do not attempt to repair or modify this equipment 12 Index Quick reference table for phone menus 21 13 Contact information 13.1 Personalizing your phone 9 Technical data 22 13.2 Advanced features 10 Frequently asked questions 23 14 Default settings 25 25 26 26 26 27 29 13 14 18 11 Appendix 24 15 Quick reference table for menus 19 11.1 Equipment approval Information 24 11.2 Notification to the local telephone company 11.3 Notes 11.4 Rights of the Phone Company 11.5 Interference Information 11.6 Noise 24 24 24 24 25 11.7 FCC RF Radiation Exposure Statement 25 11.8 Hearing Aid Compatibility (HAC) 25 16 Technical data 20 17 Frequently asked questions 21 18 Index 19 Contact information 22 24 2 Table of contents Important Safety Instructions Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Telephones should not be used while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock. 5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation unless proper ventilation is provided. 6. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. 7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 8. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 10. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 11. Do not expose the product to extreme temperatures such as areas near a hot radiator or stove or in a hot car. 12. Do not place lighted candles, cigarettes, cigars, etc., on the telephone. 13. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 14. Never install or modify telephone wiring during a lightning storm. 15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 16. Use caution when installing or modifying telephone lines to prevent electrical shock and/or fire. 17. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed. B. If the product has been exposed to rain or water. C. If the product does not operate normally by following the operating instructions. D. If the products cabinet has been damaged. E. If the product exhibits a distinct change in performance. 18. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 19. Do not use the telephone to report a gas leak in the vicinity of the leak. 20. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. Important Safety Instructions 3 11. Do not store this product, or the battery(ies) provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 12. If your product uses rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual. SAVE THESE INSTRUCTIONS IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:
1. Use only the type and size of battery(ies) specified in the user manual. 2. Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Exercise care in handling battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor may overheat and cause burns. 5. Do not attempt to recharge the battery(ies) provided with or identified for use with this product that are not intended to be charged. The battery(ies) may leak corrosive electrolyte or explode. 6. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin. 7. When replacing battery(ies), all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.) 8. When inserting battery(ies) into this product, the proper polarity or direction must be observed. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion. 9. Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product. 10. Discard dead battery(ies) as soon as possible since dead batteries are more likely to leak in a product. 4 Important Safety Instructions 1 Environment and safety 1.1 Safety information This telephone is not designed for making emergency telephone calls when the power fails. An alternative should be made available for access to emergency calling. 1.2 Power requirements The product requires an electrical supply of 120 volts, single phase alternating current, excluding IT installations defined in standard UL 60950. In case of power failure, the communication can be lost. CAUTION 1.3 Battery requirements The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR11/45).
The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. Warning 1.4 Telephone connection The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard UL 60950). Following a power cut, the call in progress is lost.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. 1.5 Environmental care Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling. 1.6 Precautions
Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing aids may experience interference in the form of a humming noise.
We advise that this phone should not be used near intensive care medical equipment, nor by persons with pacemakers.
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if placed too close. It is recommended that you position the base unit at least one meter from such appliances. CAUTION CAUTION
Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit. Base adapter:
Input: 120 VAC 60 Hz Output: 9 VDC 400 mA Charger adapter:
Input: 120 VAC 60 Hz Output: 9 VDC 200 mA
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use nonrechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM The term IC: before the certification number signifies that Industry Canada technical specifications were met. This certification means that the equipment meets certain radio communications and operational requirements. Environment and safety 5 2 Important information 2.1 For your safety Before installing your XL340, carefully read the following information. 2.2 Telephone connection Always use the line cable provided with the product otherwise you may not have a dialing tone. 2.3 Need help?
For more information on Troubleshooting and FAQ's:
Online help: www.philips.com/support
Troubleshooting: see page 23 Warning 2.4 Safety information
This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. 2.5 Conformity Hereby, Philips declares that the XL340 is in compliance with the essential requirements and other relevant provisions of R&TE 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. The Declaration of conformity is available on www.philips.com/support 2.6 Safety precautions
Do not allow the handset to come into contact with water.
Do not open the handset or the base station. You could be exposed to high voltages.
Do not allow the charging contacts or the batteries to come into contact with conductive materials.
Never use any battery type other than the one supplied : risk of explosion. Warning
Metallic objects may be retained if placed near or on the handset receiver. Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste. Disposal instructions for batteries:
Batteries should not be disposed of with general household waste. Packaging information:
Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste. A financial contribution has been paid to the associated national recovery &
recycling system. The labeled packaging material is recyclable. 2.7 Digital security system Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. There is a unique digital security code programmed in each unit. When the base and the handset ist powered up the first time, the handset automatically registers with the base ready for normal use. Note If more than one handset is registered with the base, registration may take approximately one minute. 6 Important information 3 Your phone 3.1 Whats in the box 2 rechargeable batteries Base unit Handset Battery door Power adaptor for base Line cord*
Belt clip User manual Quick start guide Guarantee Make sure you have all these items in the box. For missing item(s), contact your dealer. Note
*You may find in the box the line adaptor delivered separately from the line cord. In this case, please plug first this line adapter onto the line cord before connecting it to the line socket. In multi-handset packs, you will find additional handsets, chargers, power supplies, and batteries. Your phone 7 3.2 Overview of the phone L M 8 A Earpiece B Display C Direct memory keys Use to access direct memories. D Talk key Use to take the line and answer a call. In viewing memory, use to dial out the number. Use to end a call. E Speaker key Use to turn on or off the speaker. Use to change the ringing melody. F Redial, Cancel & Recall key Use to cancel an operation. Use to redial the last dialed number. Use to send out a flash. G Digit keys Use to dial digits and enter characters. Use to access extra memories. H Insert star & Program key Use to insert * (star). Use to enter program mode. Insert # & Pause key Use to insert #. Use to insert pause (P) when dialing. Intercom Key Use to make intercom call. I J K Microphone L Volume up Key Use to increase ringer and audio volume. M Volume down Key Use to decrease ringer and audio volume. Warning
Handsfree activation could suddenly increase the volume in the loudspeaker to a very high level. Make sure the handset is not too close to your ear. Your phone 3.3 Overview of the base A B Loudspeaker is turned on. The ringer is turned off. The handset is linked to the base. A LED Steadily on when line is in use. Blinking when receiving incoming call. Blinking when having new message in mailbox. B Page key Use to locate handset(s). Use to register handset(s). 3.4 Display icons When being used for the first time, it is sometimes necessary to wait until the batteries are sufficiently charged before the icons appear on the display. The display gives information about the operation of your telephone. The following icons can be shown in the headline of the display. Displays the current battery level. It scrolls during charging. The phone is in use. It blinks during ringing. There is a new voice mail in your network mailbox (subscription needed). Phonebook memory is being reviewed or edited. The phone is in program mode. Your phone 9 4 Getting started 4.1 Connect the base Place the base station close enough to the telephone and the mains power sockets so that the cables will reach. 1 Connect the telephone line cord to the phone socket on the bottom of base unit and the wall phone sockets. Note To use this phone, you need an RJ11C (CA11A) type modular telephone jack, which might look like the one pictured here, installed in your home. If you do not have a modular jack, call your local phone company to find out how to get one installed. 2 Connect output plug of power adapter to the power socket on the bottom of base unit. Connect the power adapter to the wall mains supply. Warning
The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. 4.2 Connect the charger If you have bought a multi-pack product, each extra handset comes with a charger and a charger adaptor. 1 Connect the output plug of the charger adaptor to the bottom of the charger. Connect the charger adaptor to the wall mains supply. 2 4.3 Insert the batteries in the handset 1 Place the two rechargeable batteries
(included) into the battery compartment. Warning
Verify the batteries polarity when inserting the batteries. Incorrect polarity may damage the product. Slide the battery door firmly into place. Warning 2
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE RECOMMENDED TYPE SUPPLIED WITH THIS PRODUCT. NEVER USE NON-RECHAR-
GEABLE BATTERIES. Warning 4.4 Charge batteries
The base station must always be plugged into the mains when charging or when in use. Place handset on the base unit or the charger and let 10 Getting started the batteries continuously charge for 24 hours before using. The battery icon appears on the screen when charging has started. Note If the batteries are completely exhausted, the product will not be able to power-on immediately. Handset may get warm during initial charge. This is normal. Note The warranty does not apply to the batteries and any other components which have a limited lifetime or are exposed to wear. 4.4.1 Low battery warning An empty battery icon batteries need recharging. Place the handset on the base unit or the charger to recharge the batteries. indicates the Note Handset will go into sleep mode after reaching a very low battery voltage level. Note A low battery alert (during off hook) will also inform you that the handset has to be recharged. If it happens during a call, the call may end shortly after the alert. 4.4.2 Battery life and range Optimal battery life is reached after 3 cycles of complete charging and discharging. Optimal range is reached when there is no other electrical appliances working within the range area. Battery life in talking mode:
Up to 12 hours Battery life in standby mode: Up to 150 hours Up to 50 meters Indoor range:
Outdoor range:
Up to 300 meters 4.5 Using GAP standard compliance The GAP standard guarantees that all DECT GAP handsets and base stations comply with a minimum operating standard irrespective of their makes. XL340 handset and base station are GAP compliant, which means they guarantee the minimum functions: register a handset, take the line, make a call and receive a call. The advanced features may not be available if you use them with other makes. To register and use XL340 handset with a GAP compliant base station from different make, first follow the procedure described in the manufacturer's instructions, then follow the procedure described in this manual for subscribing a handset. To register a handset from different make to XL340 base station, place the base station into registration mode, then follow the procedure described in the handset's manufacturer's instructions. 4.6 Standby mode Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, battery icon, and the signal icon. 4.7 Verify the signal The signal icon displays the link status between your handset and the base unit. is steadily on: Your handset and base unit are linked. is flashing: Your handset and base unit have lost link. Getting started 11 5 Using your phone Warning 5.1 Call
This telephone is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. 5.1.1 Make a call 1 2 and wait for the dial tone. Press Dial the number you want to call.
The number appears on display and is dialed. 5.1.2 Call timer The call timer shows the duration of your current call on display. It is shown in minutes and seconds
(MM:SS) in the first hour. After that, it will be shown in hours and minutes (HH:MM). 5.1.3 Preparatory dialing (Pre-Dial) With pre-dial, you can see and edit the number you are calling before dialing it. 1 Enter the number you want to call.
The number appears on display. Press Note
. 2 You can enter up to 24 digits. Press an incorrect digit. to delete 5.1.4 Redial the last number With redialing, you can redial the last number dialed. 1 2 Press Press
The last dialed number appears on display and
. 5.1.5 Call from phonebook memory Press while viewing a memory.
The phonebook memory appears on display and is dialed. Note If the number is longer than 12 digits, only the last 12 digits are shown on display. For more details on the phonebook memory function, see Phonebook memory, page 15. 5.2 Answer a call When you receive a call, the phone will ring and will flash on the display. to answer the call. Press Note If the ringer is turned off, the phone will not ring for the incoming call. 5.2.1 Answer a call in handsfree mode The handsfree feature enables you to talk to the caller without holding onto the phone. It also allows others in the room to join in the conversation. When you receive a call, the phone will ring and will flash on the display. to answer the call. Press 5.3 Loudspeaker phone During a call, press loudspeaker. to turn on and off the
appears on the handset display when loudspeaker is on. 5.4 Adjust the audio volume During a call, 1 2 to increase the audio volume, to decrease the audio volume. press press is dialed. 12 5.5 End a call Press during a call to end it. Using your phone 5.6 Make a second call during a call. 1 Press
R appears and you will hear a dial tone. Enter the number you want to call. After the second call is answered, you can press to toggle between these 2 calls. 2 3 5.7 Answer a second call During a call, if another call comes in, the handset will sound a short beep periodically to notify you. You can answer it without ending the current call. 1 Press
R appears on display, the current call will be when the second call comes in. put on hold, and you are talking with the second caller. 2 Press these 2 calls. subsequently to toggle between 5.8 Conference call 5.8.1 Join a conversation During a call, another handset can join the conversation by pressing
A short beep (alert tone) will apply to the original handset to notify the conference call is initiated. 5.8.2 Exit from Conference call During a conference call, press the conference call. to exit from
The other handset is still connected to the external caller. 5.9 Use intercom You can call someone in the house by using the intercom function. Press and hold 1 If there are only 2 handsets registered to the 2 base station, the intercom will be made automatically. Otherwise, enter the handset
. number you want to make the intercom call to. Press phone is ringing. to answer the intercom when the 3 5.10 Text or number entry You can enter texts and numbers for the phonebook memories and other features. 1 to delete a character. Press corresponding key as many times as necessary to reach the desired character. Press Press and hold characters. Press lowercase.
The characters entered thereafter will be in the to switch between uppercase and to delete all entered 2 3 alternate case. Example to write "Peter"
1 2 3 4 5 6 P once:
P once:
Pe twice:
Pet once:
Pete twice:
three times: Peter Press Press Press Press Press Press Upper case input table Assigned characters
[space] 1 , . ! ? : ; ' "
A B C 2 D E F 3 G H I 4 J K L 5 [ ]
M N O 6 P Q R S 7 T U V 8 W X Y Z 9 0 $ @ _ ( ) < > ~
Keys 1 2 3 4 5 6 7 8 9 0
Using your phone 13 Lower case input table Assigned characters
[space] 1 , . ! ? : ; ' "
a b c 2 d e f 3 g h i 4 j k l 5 [ ]
m n o 6 p q r s 7 t u v 8 w x y z 9 0 $ @ _ ( ) < > ~
Keys 1 2 3 4 5 6 7 8 9 0
14 Using your phone 6 Use more of your phone 6.2 Personalizing your phone 6.1 Phonebook memory Your phone has 12 phonebook memories providing you with the convenience for making calls. Each memory can store a name up to 12 characters and a number up to 24 digits. Memory type Direct access memories Extra memories Associated key Digit keys 1 ~ 9 6.1.1 Save phonebook memory In standby mode:
1 Enter the number. Press and hold
It is shown as P. Press and hold digit keys (1 to 9) to insert a pause. Direct Memory (
The number is saved. You will hear a confirmation tone and see NAME?.
). 2 OR 2 6.2.1 Give your phone a name You can give your phone a different name. If you have more than one handset, you can give each handset its own name. The handset name can be up to 10 characters long. It can be composed of A-Z, 0-9 and space. In standby mode:
1 2 3 Press and hold Enter 40. (See index number table page 21.) Press and hold
The current handset name is shown. Edit the name. Press and hold until you see MENU?. to confirm. 4 5
. 6.2.2 Select display language You phone supports many languages. In standby mode:
1 2 3 Press and hold Enter the language index number (see below). Press and hold until you see MENU?. to confirm. 3 4 Enter the name. Press and hold the same memory key to save the name. 6.1.2 View phonebook memory You can view these memories when the handset is in standby mode. Press Direct Memory OR press and hold digit keys (1 to 9).
The name and number will be shown. 6.1.3 Delete all memories You can delete all memories by using the RESET function. See page 17 for more information. Language Name English Dutch French German Italian Russian Spanish Turkish Danish Swedish Norwegian Greek Polish Portuguese Finnish Hebrew Index Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Use more of your phone 15 can be lit when the 6.2.3 Turn the backlight on/off The LCD and the key phone is being used. In standby mode:
1 2 3 Press and hold Enter 44. (See index number table page 21.) Press and hold
The new setting is shown. until you see MENU?. to confirm. 6.2.4 Auto Pick-up Auto Pick-up gives you the convenience of answering a call by picking up the handset from the cradle or charger. You don't need to press
. In standby mode:
1 2 3 Press and hold Enter 42. Press and hold
The new setting is shown. to confirm. until you see MENU?. 2 3 2 3 6.2.7 Select ringing melody In standby mode:
1 until you see the current Press and hold melody name. Select the desired melody by pressing digit keys 0-9. Press to confirm. 6.2.8 Change the ringing volume In standby mode:
1 until you see the current to increase or decrease the Press and hold melody name. Press and volume level. Press Note to confirm. If ringing volume level is set to OFF, appears. 6.2.5 Auto Hang-up Auto Hang-up gives you the convenience of ending a call by putting the handset onto the charging cradle. You don't need to press
. In standby mode:
1 2 3 Press and hold Enter 43. Press and hold
The new setting is shown. until you see MENU?. to confirm. 6.2.6 Auto Dialing Auto Dialing gives you the convenience of making a call from phonebook memories associated to key 1 or 2 by pressing and holding the key 1 or 2 during standby. You don't need to press In standby mode:
1 2 3 Press and hold Enter 45. Press and hold
The new setting is shown. until you see MENU?. to confirm. 6.2.9 Turn the key tone on/off Key tones are tones your handset makes each time you press a key on the handset. In standby mode:
1 2 3 Press and hold Enter 41. Press and hold
The new setting is shown. until you see MENU?. to confirm. 6.3 Advanced features 6.3.1 Register a handset If you have inadvertently unregistered your handset, you can register it again. Additional handsets must be registered to the base before use. In standby mode:
1 2 Press and hold Enter 51. Press and hold BASE?. Select the base using the digit keys (1, 2, 3 or 4). Press and hold SEARCHING... until you see MENU?. until you see until you see 3 16 Use more of your phone 4 on the base unit for 3 Press and hold seconds.
The base will turn on the LED for 30 seconds.
If registration is successful, handset will show REGISTERED. Note If registration was not successful, the handset will show FAILED. Repeat the above procedures and try again. 6.3.2 Select a base If your handset is registered to more than 1 base, you can select which base the handset will use. You can choose a fixed base or you can allow the handset to automatically search for a nearby available base (AUTO base selection). In standby mode:
1 2 3 until you see MENU?. Press and hold Enter the base index number (see below). Press and hold
If successful, handset will show the selected to confirm. base. Otherwise, handset will show FAILED. Base selection BASE 1 BASE 2 BASE 3 BASE 4 AUTO Index Number 64 65 66 67 68 6.3.3 Un-register a handset A handset can un-register another handset registered to the same base station. It cannot un-
register itself. In standby mode:
1 2 Press and hold Enter 52. Press and hold HANDSET?. Enter the number of the handset you want to unregister. Press and hold
If un-registration is successful, your handset will until you see MENU?. until you see to confirm. 3 show DELETED. 6.3.4 Reset your phone You can reset your phone to factory settings. To find out what settings are being reset, see page 20. In standby mode:
1 2 Press and hold Enter 01 if you want to delete all the memories. until you see MENU?. OR 2 3 Enter 02 if you want to keep the memories unchanged. Press and hold PROCESSING.... until you see 6.3.5 Select flash duration This option is helpful when using operator services. The default value of flash duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode:
1 2 until you see MENU?. Press and hold Enter the flash duration index number (see below). Press and hold setting is displayed. until you see the new 3 Flash duration FLASH 1 FLASH 2 FLASH 3 FLASH 4 FLASH 5 FLASH 6 FLASH 7 Index Number 71 72 73 74 75 76 77 6.3.6 Select pause duration This option is helpful when using operator services. The default value of pause duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. Use more of your phone 17 In standby mode:
1 2 until you see MENU?. Press and hold Enter the pause duration index number (see below). Press and hold setting is displayed. until you see the new 3 Pause duration PAUSE 1 PAUSE 2 Index Number 78 79 6.3.7 Select dial mode (country dependent) The default value of dial mode that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode:
1 2 3 Press and hold Enter 60. Press and hold
The new setting is shown. until you see MENU?. to confirm. 6.3.8 Temporary tone dialing in pulse dial mode If the dialing mode is set to pulse, you can press and hold to set temporary tone dialing.
d will be displayed on the screen. All the following digits will be dialed as tones until you hang up. 6.3.9 Set prefix insertion The prefix insertion feature checks and formats your outgoing call number before it is dialed. If the first few digits of the number match with the digits you set as DETECT, they will be replaced by the digits you set as PREFIX. For example, you set DETECT as 604 and PREFIX as 967. When you are making a call to 6045551212, the actually dialed number will be 9675551212. The number shown is still 6045551212. 4 5 OR 5 6 Press and hold Enter 62. Press and hold Edit the DETECT digits In standby mode:
1 2 3 OR 3 until you see MENU?. enter a new one if you see DETECT? (such as 604 in the above example). Press and hold to confirm. Edit the PREFIX digits enter a new one if you see PREFIX? (such as 967 in the above example). Press and hold Note to confirm. If the dialed number starts with #, * or P, the PREFIX will not be added. Note Press and hold to insert a pause in PREFIX. 6.3.10Message waiting indication If you have subscribed to the voice mail service from your local service provider, will be on when you have a new message in your mailbox. The LED on base station will blink. After you've listened to all the new messages, will turn off. The LED on base station will stop blinking. Note You may also see VOICEMAIL shown on the display if you have new message in your mailbox, but it will disappear after you make an outgoing call. 6.3.11Paging handset You can use this feature to locate the handsets. In standby mode, press on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays PAGING.... Note You can stop the paging by pressing any key on on the base again. each handset or pressing 18 Use more of your phone 6.4 Use the headset Headset is optional and not provided. A headset with 2.5mm jack and minimum 32 ohm speaker impedence must be used. It is available from retail store. To use a headset, plug the headset into the headset jack at the side of the handset. Use more of your phone 19 7 Default settings These are the factory pre-programmed settings of your phone. Settings after Reset English PHILIPS On On On Tone On Flash 2 Pause 1
[Empty]
RING 1 3 blocks 3 blocks 3 blocks Functions Display Language*
Handset Name Auto Pick-up Auto Hang-up Backlight Dial Mode*
Key Tone Flash Duration*
Pause Duration Prefix Melody Selection Ring Volume Receiver Volume Speaker volume Message Waiting Indication Off Base selection Auto Dialing*
Last dialed number Phonebook memories**
AUTO Off
[Empty]
[Empty]
* Country dependent features
**These memories will remain unchanged for Reset 02 20 Default settings 8 Quick reference table for phone menus The table below lists the menus of your phone. Reminder: Press and hold Press to exit from any menu instantly. until you see MENU? to enter the menu index number. Index Number 01 02 10 - 25 40 41 42 43 44 45 51 52 60 62 64 - 68 71 - 77 78 - 79 Menu Full Reset Partial Reset Language Handset Name Key Tone Auto Pick-up Auto Hang-up Backlight Auto Dialing Registration Un-registration Dial Mode Prefix Insertion Base Selection Flash Duration Pause Duration Quick reference table for phone menus 21 9 Technical data General telephone features
Caller name & number identification
12 phonebook memories with direct access
Conference call and voicemails
Intercom
Base selection Battery
2 x AAA NiMH 750mAh batteries Weight and dimensions
Handset: 160 grams 180 x 32 x 56 mm (H x D x W)
Base: 150 grams 94 x 128 x 117 mm (H x D x W) Temperature range
Operation: 0C to +46C
Storage: -25C to +70C Relative humidity
Operation: Up to 95% at 40C
Storage: Up to 95% at 40C 22 Technical data 10 Frequently asked questions In this chapter you will find the most frequently asked questions and answers about your phone. Set up No dial tone
Check the phone and power connections.
The handset may be out of range. Move closer to the base station.
The battery capacity may be low. Charge battery. Range/Signal icon is flashing
Move closer to the base station.
If the handset displays UNREGISTERED, register the handset, see page 16. The handset does not switch on
Charge the battery: Put the handset on base/
charger. The battery icon is animated while charging. After a few moments the phone will switch on. The handset does not charge
Check base/charger connections.
The battery may be defective. Purchase new battery from your dealer.
Check that the batteries are inserted correctly.
Make sure the handset is placed properly on the base/charger. The battery icon is animating while charging. Communication is lost during a call
Charge the battery.
Move closer to the base station. Sound Handset does not ring
Check that the handset melody volume is turned on. See page 16.
Too many phones may be sharing the same phone line. Disconnect some of the phones. No parking tone from the handset
Check the power connections of the base/
charger.
The handset may not be placed properly. Try again.
Charging contacts may be dirty. Clean contacts with a damp cloth. Product behaviour Bad audio quality (crackles, echo, etc.) during a call
The handset may be nearly out of range. Move closer.
The phone may be interfered by nearby electrical appliance. Move the base unit to a different location.
The phone may be at a location with thick walls. Move the base unit to a different location. Caller ID does not display
Caller ID service may not be activated. Check with your service provider.
The caller's information may be withheld or is unavailable.
Let the phone ring at least once before answering it. Second call service does not work
Second call service may not be activated. The second call service may not be available from your telephone operator, check availability of the service with your telephone service provider.
Check that the flash selection is correct. See page 17. Tip If the above solutions do not help, remove the power from both the base station and the handset. Wait for 15 minutes and try again. Frequently asked questions 23 11 Appendix 11.1 Equipment approval Information Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 11.2 Notification to the local telephone company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. to be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 11.3 Notes
This equipment may not be used on coin service provided by the telephone company.
Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.
Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. 11.4 Rights of the Phone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must:
(1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. 11.5 Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
24 Appendix
(1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class b digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
(that is, the antenna for radio or television that is receiving the interference).
Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, How To Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. 11.6 Noise Electrical pulse noise is present at one time or another. This is most intense during electrical storms. Certain kinds of electrical equipment, such as light dimmers, fluorescent bulbs, motors, fans, etc., also generate pulse noise. Because radio frequencies are susceptible to this, you may on occasion hear pulse noise through the receiver. This is usually only a minor annoyance and should not be interpreted as a defect of the unit. 11.7 FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For hand held operation, this phone has been tested and meets the FCC RF exposure guidelines. For Body-worn operation, use only with the belt clip. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. 11.8 Hearing Aid Compatibility (HAC) This telephone system meets FCC and Industry Canada standards for Hearing Aid Compatibility. 11.9 Privacy Privacy of communications may not be ensured when using this telephone. 11.10 Additional Information I.C. Notice Appendix 25 product warranty and compliance. This could also void the users authority to operate the equipment. Service Center USA Philips Consumer Electronics P.O. Box 671539 Marietta, GA 30006-0026 Phone: 1-888-PHILIPS (744-5477) Phone: 1-800-363-7278 (English) Phone: 1-800-661-6162 (Franais) Service Center CANADA Philips - Consumer Service Division 4977 Levy Street Ville St. Lurent, Quebec H4R 2N9 Phone: 1-800-363-7278 (English) Phone: 1-800-661-6162 (Franais) 11.11 Terminal Equipment Note This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Note The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. 11.12 Radio Equipment The term IC: before the radio certification number only signifies that Industry Canada technical specifications RSS-213 and ICES-003 were met. Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 11.13 Do not attempt to repair or modify this equipment Repairs to certified equipment should be made by an authorized maintenance facility designated by the supplier. Any repairs or alterations made by the user to the equipment may render the equipment void in 26 Appendix 12 Index A Additional Information 25 Advanced features 16 Answer a call 12 Answer a second call 13 Appendix 24 Audio volume, adjust 12 Auto Dialing 16 Auto Hang-up 16 Auto Pick-up 16 B Backlight on/off 16 Base, overview 9 Batteries 10, 22 Battery door 10 Battery life and range 11 Battery requirements 5 C Call 12 Call from phonebook memory 12 Call timer 12 Caller ID 23 Character set table 13 Charge batteries 10 Charger 10 Conference call 13 Conformity 6 Connect the base 10 Connect the charger 10 Connection 5, 6 Contact information 29 D Default settings 20 Delete all phonebook memories 15 Dial mode, change 18 Digital security system 6 Dimensions 22 Display 8 Display icons 9 Display language, select 15 Index Do not attempt to repair or modify this equipment 26 E Earpiece 8 End a call 12 Environmental care 5 Equipment approval Information 24 Example text entry 13 Exit from Conference call 13 F FCC RF Radiation Exposure Statement 25 Flash duration, select 17 Frequently asked questions 23 FG GAP standard 11 Getting started 10 H Handsfree mode 12 Hearing Aid Compatibility (HAC) 25 Help 6 I Important Safety Instructions 3 Insert the batteries 10 Intercom 13 Interference Information 24 K Key tone on/off 16 Keys, phone 8 L LED, base 9 Line adaptor 7 Line cord, connect 10 Loudspeaker phone 12 Low battery warning 11 Lower case input table 14 M Make a call 12 Message waiting indication 18 Multi-handset packs 7 27 T Technical data 22 Temperature range 22 Temporary tone dialing 18 Terminal Equipment 26 Text or number entry 13 Troubleshooting 23 U Un-register a handset 17 Upper case input table 13 UV View phonebook memory 15 Voicemail 18 UW Warranty 11 Weight 22 Whats in the box 7 N Name, handset 15 Noise 25 Notes 24 Notification to the local telephone company 24 Number entry 13 P Page key 9 Paging handset 18 Pause duration, select 17 Personalizing 15 Phone, overview 8 Phonebook memory 15 Power adapter, connect 10 Power requirements 5 Precautions 5 Pre-Dial 12 Prefix set 18 Privacy 25 Q Quick reference table for phone menus 21 R Radio Equipment 26 Range 11 Redial last number 12 Register a handset 16 Relative humidity 22 Reset phone 17 Rights of the Phone Company 24 Ringer OFF 16 Ringing melody, select 16 Ringing volume, change 16 S Safety 5, 6 Save phonebook memory 15 Second call 13 Select a base 17 Service Centers 26 Signal icon 11 Standby mode 11 28 Index 2006 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Document order number: 3111 285 33711 Printed in PRC
1 2 3 | USERS MANUAL 1 | Users Manual | 388.50 KiB |
Quick Start Guide DECT200 DRAFT 1.9GHz DECT Telephone Caller ID Table of Contents Hands-free 1 -
Important Safety Instructions BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOUD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY, INCLUDING THE FOLLOWING. Read and follow all warnings and instructions marked on the product. Do not use this product near water, laundry tub, in a wet basement, or near a swimming pool. Do not place this product on an unstable table. The product may fall and be damaged. This product should never be placed near or over a radiator or heat register. This product should be operated only from the type of power source indicated on the label. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use this product to report a gas leak in the vicinity of the leak. Do not use this product near intensive care medical equipment or by persons with pacemakers. Due to the radio signals between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise. Do not allow the handset to come into contact with liquids or moisture. Do not open the handset, base unit or charger. This could expose you to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials. There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the power supply and telephone socket during a storm. Do not use the handset in an explosive hazard area such as where there is gas leaking. It is recommended that this product is not used near intensive care medical equipments or by persons with pacemakers. This product can interfere with electrical equipment such as answering machine, television, radio, and computers if placed too close. We recommend that you position the base unit at least one meter from such appliances. This product is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. BATTERIES Use only the battery type listed in the instruction manual. Do not use lithium batteries. Do not dispose of the battery in a fire, as they can explode. Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It can be toxic if swallowed. Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns. Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin. Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion. Remove the battery cells if you do not plan to use the product for several months at a time. Discard any dead batteries because they are likely to leak into the product. Do not store this product or the battery in a high temperature area. Battery stored in a freezer or refrigerator should be protected from condensation during storage and defrosting. Battery should be stabilized at room temperature before using. Your battery is rechargeable and can be recycled once it outlives its usefulness. Depending upon your local and state law, it might be illegal to dispose of this battery into a municipal waste system. Check with your local solid waste company for more information on your recycling options for the battery cells. SAVE THESE INSTRUCTIONS
- 2 -
Environment and Safety
- 3 -
Whats in the Box?
Make sure you have all these items in the box. For missing item(s), contact your dealer. Base Unit Base Power Adapter Handset Handset Battery Cover NiMH AAA Telephone Line Cord Rechargeable Battery x 2 Quick Start Guide Charger
* For multiple pack model Charger Power Adapter
* For multiple pack model
- 4 -
About your phone THE BASE 1 Page key Use to locate handsets. Use for registration. THE ICONS Each icon gives you a visual message of what is happening on your handset. Battery level Call in progress Voicemail indicator Caller ID indicator Phonebook Alarm clock on Speaker on Ringer off Signal strength Press to confirm Menu options upward Menu options downward Press to cancel/delete More digits on the right
- 5 -
THE HANDSET 1 Menu & OK key Use to enter the menus. Use to select menu. Use to confirm selection. Redial, Mute & Back key Use to enter the redial log. Use to dial the last dialed number. Use to erase text and numbers. Use to mute/unmute microphone. Use to switch between screens. 3 Up Navigation & Call Log key Use to enter the call log. Use to scroll up menu items. Use to increase the ringer and receiver volume. Down Navigation & Phonebook key Use to enter the phonebook. Use to scroll down menu items. Use to reduce the ringer and receiver volume. Talk & Recall key Use to make and receive calls. Use to send flash signal. End & On/Off key Use to end a call. Use to exit menus. Digit keys Use to dial digits. Use to enter text and numbers. Star & Ringer Off key Use to dial *. Use to lock the keypad. Pound, Keylock, & Pause key Use to dial #. Use to enter a pause. Use to turn the ringer on/off. Speaker key Use to turn the speaker on/off. Intercom & Conference key Use to make an intercom call. Use to start a conference call. 2 4 5 6 7 8 9 1 0 1 1
- 6 -
Getting Started CONNECTING YOUR PHONE NOTE: The power adapters (for the phone and charger) are intended to be correctly orientated in a vertical or floor mount position. 1. Connect the output plug of the mains adapter to the bottom of the base unit. 2. Connect the mains adapter to a standard wall outlet. 3. Connect the telephone line cord to the phone sockets at the bottom of the base unit and the wall phone socket. CONNECTING YOUR CHARGER
* For multiple pack model 1. Connect the output plug of the mains adapter to the bottom of the charger unit. 2. Connect the mains adapter to a standard wall outlet. CHARGING YOUR HANDSET WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.
- 7 -
CAUTION: Check the batteries polarity when inserting the batteries. Incorrect polarity may damage the product. 1. Place the 2 rechargeable batteries (included) into the battery compartment. 2. Slide the battery door firmly into place. 3. Place the handset on the base unit or charger for charging. Charge for 14 hours before initial use.
* The charger is only applicable to multiple pack model. NOTE: Handset may get warm during initial charge. This is normal. The handset may take a few seconds to power up.
- 8 -
Call NOTE: Emergency Call. This telephone is not designed for making emergency telephone calls when the power fails. Alternate arrangements should be made for access to MAKING A CALL This section describes the different ways to make a call. 1. Press 2. Dial the phone number. The number displays on the screen
. and is dialed out. NOTE: Call Timer. During a call, the call timer displays the talk time of your current call. ENDING A CALL 1. Press or place the handset on the base unit or charger. ANSWERING A CALL When you receive a call, your phone rings. Press to answer the call. TIP: Silent Ringer. When the phone is ringing, press turn off the ringer for the incoming call. to NOTE: Caller ID Service. Consult and subscribe from your service provider.
- 9 -
Registering Your Handset Registration allows communication between your base unit and handset(s). If your handset cannot communicate with its base, you will not be able to make any call or use some of the functions and features on the phone. NOTE: Your handset is already registered unless you have bought an extra handset individually or you have de-registered If your handset displays UNREGISTERED, follow the steps below to register your handset. 1. Press on the base for 4 seconds. on the handset. 2. Press 3. Press OK to select REGISTRATION. 4. Enter the system PIN (Pre-set: 0000). Press BACK to make corrections. 5. Press OK. 6. Select the base number you want. A blinking digit indicates that the base number is already being used. Your handset starts searching for the base. If registration is successful, the signal icon the handset name. The base assigns a handset number to your handset. It is the digit displayed on the right margin of the screen. If registration failed, repeat the above procedure. displays steadily along with NOTE: Your base can register up to 4 handsets.
- 10 -
Troubleshooting Problem(s) No dialing tone Signal icon flashing No parking tone Handset on the charger does not charge No display Bad audio (crackles, echo, etc.) Tip(s) Check your phone connections. The handset may be out of range. Move closer. The battery capacity may be low. Charge battery. The handset may be out of range. Move closer. If the handset displays Unregistered, register the handset. See page 9. The handset may not be placed properly. Try again. Charging contacts may be dirty. Clean contacts with a damp cloth. The battery may be defective. Purchase new battery from your dealer. Check that the battery is inserted correctly. Make sure the handset is placed properly on the base unit or charger. The battery icon is animated while charging. Check that the battery is charged. Check the connections. The handset may be nearly out of range. Move closer. The phone may be interfered by nearby electrical appliance. Move the base unit to a different location. The phone may be at a location with thick walls. Move the base unit to a different location. Handset does not ring Check that the handset ringer is turned on. Caller ID does not display Caller ID service may not be activated. Check with your service provider. The callers information may be withheld or is unavailable. 2nd call service may not be activated. Check with your service provider. Check that the recall selection is correct. Cannot make/answer a 2nd call
- 11 -
1 2 3 | USERS MANUAL 2 | Users Manual | 562.20 KiB |
User Guide DECT200 DRAFT 1.9GHz DECT Telephone Caller ID Hands-free Table of Contents 1 Environment and Safety .......................................................2 2 Whats in the Box? ..............................................................4 3 Welcome ..........................................................................5 How to use this user guide? ................................................. 5 Need more help? .............................................................. 5 4 About your phone ...............................................................6 The handset.................................................................... 6 The base........................................................................ 7 The icons ....................................................................... 7 The menus ..................................................................... 8 5 Getting Started ..................................................................9 Connecting your phone....................................................... 9 Connecting your charger..................................................... 9 Charging your handset ....................................................... 9 Checking the battery level .................................................10 What is standby mode?......................................................10 Registering your handset ...................................................11 Setting the clock .............................................................11 6 Call ............................................................................... 12 Making a call ..................................................................12 Ending a call ..................................................................13 Answering a call..............................................................13 During a call ..................................................................14 Intercom and Conference Calls............................................. 15 Calling another handset.....................................................15 Transferring a call ...........................................................15 Making a conference call ...................................................15 8 Text and Numbers............................................................. 17 Entering text and numbers .................................................17 9 Phonebook ...................................................................... 18 Viewing the phonebook .....................................................18 Calling from the phonebook................................................18 Adding a record ..............................................................19 Editing a record ..............................................................19 Deleting a record.............................................................19 Deleting all records..........................................................19 10 Call Log .......................................................................... 21 Viewing the call records ....................................................21 Making a call ..................................................................21 Saving a call record to your phonebook ..................................21 Deleting a call record .......................................................21 Deleting all records..........................................................21 11 Custom Options ................................................................ 23 Personalizing your phones display........................................23 Personalizing your handsets sounds ......................................23 12 Calling Features ............................................................... 25 7
- i -
Table of Contents Auto answer...................................................................25 Dial mode .....................................................................25 Recall selection ..............................................................25 Area code removal...........................................................26 CID Prefix......................................................................26 13 Extra Features ................................................................. 27 The alarm clock ..............................................................27 Baby call.......................................................................27 Keypad lock ...................................................................28 Missing handset(s)............................................................28 Voicemail indication.........................................................28 14 The System ..................................................................... 29 Registering your handset with additional base..........................29 Selecting a base unit ........................................................29 Deleting a handset...........................................................30 Changing the system PIN....................................................30 Resetting to default settings ...............................................30 15 Appendix ........................................................................ 31 Default settings ..............................................................31 Troubleshooting ..............................................................32 PHONE Specifications........................................................33 16 Compliance Statement ....................................................... 34 17 Service Centers ................................................................ 37
- ii -
Important Safety Instructions BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOUD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY, INCLUDING THE FOLLOWING. Read and follow all warnings and instructions marked on the product. Do not use this product near water, laundry tub, in a wet basement, or near a swimming pool. Do not place this product on an unstable table. The product may fall and be damaged. This product should never be placed near or over a radiator or heat register. This product should be operated only from the type of power source indicated on the label. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use this product to report a gas leak in the vicinity of the leak. Do not use this product near intensive care medical equipment or by persons with pacemakers. Due to the radio signals between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise. Do not allow the handset to come into contact with liquids or moisture. Do not open the handset, base unit or charger. This could expose you to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials. There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the power supply and telephone socket during a storm. Do not use the handset in an explosive hazard area such as where there is gas leaking. It is recommended that this product is not used near intensive care medical equipments or by persons with pacemakers. This product can interfere with electrical equipment such as answering machine, television, radio, and computers if placed too close. We recommend that you position the base unit at least one meter from such appliances. This product is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. BATTERIES Use only the battery type listed in the instruction manual. Do not use lithium batteries. Do not dispose of the battery in a fire, as they can explode. Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It can be toxic if swallowed. Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns. Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin. Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion. Remove the battery cells if you do not plan to use the product for several months at a time. Discard any dead batteries because they are likely to leak into the product. Do not store this product or the battery in a high temperature area. Battery stored in a freezer or refrigerator should be protected from condensation during storage and defrosting. Battery should be stabilized at room temperature before using. Your battery is rechargeable and can be recycled once it outlives its usefulness. Depending upon your local and state law, it might be illegal to dispose of this battery into a municipal waste system. Check with your local solid waste company for more information on your recycling options for the battery cells. SAVE THESE INSTRUCTIONS
- 1 -
Environment and Safety Environment and Safety IMPORTANT This product is not designed for making emergency telephone calls when the power fails. Alternate arrangements should be made for access to emergency services. Power requirements This product requires an electrical supply of 110-120 volts, single-phase alternating current, excluding IT installations defined in standard UL 60950. CAUTION: The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible CAUTION: Use only the mains adapter supplied with this equipment. Incorrect adapter polarity or voltage can seriously damage the unit. Handset Charger Adapter Input: 120VAC 60Hz Output: 6VDC 150mA Base Unit Adapter Input: 120VAC 60Hz Output: 6VDC 300mA Battery requirements The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 650mAh (HR10/44). WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. Telephone connections The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard UL 60950). Following a power cut, the call in progress as well as the date and time settings will be lost. Hearing aid Please note that this telephone works by sending radio signals between the base unit and the handset. These signals may interfere with some hearing aids, causing a humming noise.
- 2 -
Environment and Safety Environmental Remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries, and old equipments. Promote their recycling where possible. Recycling & disposal Disposal instructions for old products: The purpose of WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) is to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. You product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not dispose of your old product in your general household waste bin. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol. Use one of the following disposal options:
Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities. If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive. Disposal instructions for batteries:
Batteries should not be disposed of with general household waste.
- 3 -
Whats in the Box?
Make sure you have all these items in the box. For missing item(s), contact your dealer. Base Unit Base Power Adapter Handset Handset Battery Cover NiMH AAA Rechargeable Battery x 2 Telephone Line Cord Charger Power Adapter
* For multiple pack model Quick Start Guide Charger
* For multiple pack model
- 4 -
Welcome This user guide provides you with information and instruction you need to get the most from your phone. HOW TO USE THIS USER GUIDE?
The following symbols are used to alert you on important information. This symbol has two meanings:
Warning: Critical information for preventing personal injury. Caution: Critical information for preventing damage on the product. Tip: Information for easier operation. Note: Explanatory or critical information for carrying out an operation correctly. NEED MORE HELP?
See the Troubleshooting section in this user guide on page 32. Call the Helpline at Visit our online help xxx.com
- 5 -
About your phone THE HANDSET 1 Menu & OK key Use to enter the menus. Use to select menu. Use to confirm selection. Redial, Mute & Back key Use to enter the redial log. Use to dial the last dialed number. Use to erase text and numbers. Use to mute/unmute microphone. Use to switch between screens. 3 Up Navigation & Call Log key Use to enter the call log. Use to scroll up menu items. Use to increase the ringer and receiver volume. Down Navigation & Phonebook key Use to enter the phonebook. Use to scroll down menu items. Use to reduce the ringer and receiver volume. Talk & Recall key Use to make and receive calls. Use to send flash signal. End & On/Off key Use to end a call. Use to exit menus. Digit keys Use to dial digits. Use to enter text and numbers. Star & Ringer Off key Use to dial *. Use to lock the keypad. Pound, Keylock, & Pause key Use to dial #. Use to enter a pause. Use to turn the ringer on/off. Speaker key Use to turn the speaker on/off. Intercom & Conference key Use to make an intercom call. Use to start a conference call. 2 4 5 6 7 8 9 1 0 1 1
- 6 -
THE BASE About Your Phone 1 Page key Use to locate handsets. Use for registration. THE ICONS Each icon gives you a visual message of what is happening on your handset. Battery level Call in progress Voicemail indicator Caller ID indicator Phonebook Alarm clock on Speaker on Ringer off Signal strength Press to confirm Menu options upward Menu options downward Press to cancel/delete More digits on the right
- 7 -
About Your Phone THE MENUS Your phone offers a variety of features and functions grouped in the menus. Browsing the menus The main menu includes the Phonebook, Clock/Alarm, Personal Set, and Advanced Set menu.
Press to enter the main menu.
Press to enter the phonebook.
Press to enter the incoming call log. TIP: Quick Exit. Press All unconfirmed changes will not be saved. to exit from any menu instantly. Taking a glance at the menus PHONEBOOK Add Edit Delete Delete All CLOCK/ALARM Time Set Alarm Alarm Tone PERSONAL SET Handset Tone Handset Name Auto Answer Backlight Language ADVANCED SET Recall Time Dial Mode Area Code CID Prefix Baby Call Registration Base Select Delete HS Change PIN Reset
- 8 -
Getting Started CONNECTING YOUR PHONE NOTE: The power adapters (for the phone and charger) are intended to be correctly orientated in a vertical or floor mount position. 1. Connect the output plug of the mains adapter to the bottom of the base unit. 2. Connect the mains adapter to a standard wall outlet. 3. Connect the telephone line cord to the phone sockets at the bottom of the base unit and the wall phone socket. CONNECTING YOUR CHARGER
* For multiple pack model 1. Connect the output plug of the mains adapter to the bottom of the charger unit. 2. Connect the mains adapter to a standard wall outlet. CHARGING YOUR HANDSET WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. CAUTION: Check the batteries polarity when inserting the batteries. Incorrect polarity may damage the product.
- 9 -
Getting Started 1. Place the 2 rechargeable batteries (included) into the battery compartment. 2. Slide the battery door firmly into place. 3. Place the handset on the base unit or charger for charging. Charge for 14 hours before initial use.
* The charger is only applicable to multiple pack model. NOTE: Handset may get warm during initial charge. This is normal. The handset may take a few seconds to power up. indicates the batteries need recharging. CHECKING THE BATTERY LEVEL The battery icon displays the current battery level. An almost empty battery icon Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone while the battery is nearly empty, you will hear warning tones. Your call maybe cut off shortly after the warning. WHAT IS STANDBY MODE?
Your phone is in standby mode when it is idle. The standby screen displays the handset name, the handset number (the digit on the right), the time, the signal icon, and the battery icon.
- 10 -
Getting Started REGISTERING YOUR HANDSET Registration allows communication between your base unit and handset(s). If your handset cannot communicate with its base, you will not be able to make any call or use some of the functions and features on the phone. NOTE: Your handset is already registered unless you have bought an extra handset individually or you have de-registered To register your handset to an additional base unit, see Registering your handset with additional base on page 29. If your handset displays UNREGISTERED, follow the steps below to register your handset. 1. Press on the base for 4 seconds. on the handset. 2. Press 3. Press OK to select REGISTRATION. 4. Enter the system PIN (Pre-set: 0000). Press BACK to make corrections. 5. Press OK. 6. Select the base number you want. A blinking digit indicates that the base number is already being used. Your handset starts searching for the base. If registration is successful, the signal icon the handset name. The base assigns a handset number to your handset. It is the digit displayed on the right margin of the screen. If registration failed, repeat the above procedure. displays steadily along with NOTE: Your base can register up to 4 handsets. SETTING THE CLOCK Your phone has a digital clock. Set the time before initial use of the phone. Setting the time 1. Press 2. Select CLOCK/ALARM TIME SET CLOCK. Press OK. 3. Use the digit keys to enter the new time. The clock is in 24-
. hour format. 4. Press OK when finished. The new setting is saved.
- 11 -
Call NOTE: Emergency Call. This telephone is not designed for making emergency telephone calls when the power fails. Alternate arrangements should be made for access to MAKING A CALL This section describes the different ways to make a call. 1. Press 2. Dial the phone number. The number displays on the screen
. and is dialed out. NOTE: Call Timer. During a call, the call timer displays the talk time of your current call. Pre-dialing Pre-dialing lets you view and make changes to the number before making the call. 1. Enter the phone number. The number displays on the screen. You can make changes before dialing out. TIP: Press BACK to erase a digit. Press and hold to enter a pause. P displays on the screen. 2. Press to dial out the number. Redialing the last number 1. Press 2. Press
. The last dialed number displays on the screen and is dialed out. Calling from the dialed call log Each handset stores the last 5 numbers (up to 20 digits each) you have dialed. The most recent dialed number is stored at the top of the list. to enter the dialed list. 1. Press 2. Select the number you want. 3. Press to dial out the number.
- 12 -
Calling from your phonebook For details on the phonebook, see Phonebook on page 18. Call
. 1. Press 2. Select the phonebook record you want. 3. Press to dial out the number. Calling from the incoming call log You can return a call from the incoming call log. 1. Press 2. Select the record you want. 3. Press to dial out the number. ENDING A CALL 1. Press or place the handset on the base unit or charger. ANSWERING A CALL When you receive a call, your phone rings. Press to answer the call. TIP: Silent Ringer. When the phone is ringing, press turn off the ringer for the incoming call. to NOTE: Caller ID Service. Consult and subscribe from your service provider. Turning off the ringer You can turn off the ringer for all incoming calls. 1. Press and hold during standby. displays on the screen. For details on the ringer setting, see Personalizing your handsets sounds on page 23.
- 13 -
Call DURING A CALL This section describes the features that are available during a call. Making a second call NOTE: 2nd Call Service. Consult and subscribe from your service 1. Press 2. Dial the number you want. The number displays on the screen to put the current call on hold. and is dialed out. Answering a second call NOTE: 2nd Call Service. Consult and subscribe from your service During a call, your phone sounds a short beep periodically to notify you of a 2nd incoming call. 1. Press to put the current call on hold and answer the 2nd call. Toggling between two calls 1. Press to put the current call on hold and connect to the other call. Adjusting the earpiece volume 1. Press or to adjust the volume during a call. Muting the microphone The mute feature allows you to speak to someone in the house privately. 1. Press during a call. The caller cannot hear you, but you can still hear his voice. Un-muting the microphone 1. Press again. You can now communicate with the caller. Using the speaker Use the speaker to involve everyone in the room in the conversation. Turning the speaker on/off 1. Press during a call. is displayed when the speaker is on.
- 14 -
Intercom and Conference Calls NOTE: You need at least 2 handsets to carry out the functions mentioned in this section. CALLING ANOTHER HANDSET
. 1. Press 2. Select the handset you want. 3. Press OK. Wait for the other party to answer your call. 4. Press to cancel or end the intercom call. While you are on the phone While talking on the phone, you can put the external caller on hold and call another handset. during the call. 1. Press 2. Select the handset you want. 3. Press OK. Wait for the other party to answer your call. 4. Press to switch between the outside call and the intercom call. TRANSFERRING A CALL during a call. 1. Press 2. Select the handset you want. Press OK. 3. Press after the other handset answers your call. The outside call is now transferred to the other handset. MAKING A CONFERENCE CALL You are talking on the phone with an outside caller, and you want to involve another handset user in this conversation. during your call with the outside caller. 1. Press 2. Select the handset you want. 3. Press OK. Wait for the other handset to answer your call. 4. Press and hold for 2 seconds after the other handset picks up the call. You are now on a 3-way conference call. 5. Press to exit the conference call. During the conference call, 1. Press to put the external line on hold and you can talk to the other handset in private.
- 15 -
Intercom and Conference Calls 2. Press and hold to re-establish the conference call.
- 16 -
Text and Numbers You can enter text and numbers for handset name, phonebook record, and others. ENTERING TEXT AND NUMBERS 1. Find the key with the character you want. 2. Press it as many times as needed for the character to display on the screen. Characters Key
0 0
) 1 space 1 C 2 B A 2 F E 3 3 D 4 I G H 4 5 K J 5 L 6 N O M 6 7 P Q R S 8 V U 8 T 9 W X Y Z o 7 9
- 17 -
Phonebook Each handset has a phonebook that can store up to 50 records. Each phonebook record can have a name of up to 12 characters long and a number of up to 20 digits long. VIEWING THE PHONEBOOK 1. Press 2. Select the record you want. Searching a record You can search the phonebook by scrolling or by searching the first character. Searching by scrolling 1. While at the phonebook, press or to scroll. Searching by the first character 1. While at the phonebook, press the digit key that contains the character that you want to search. During a call You can access the phonebook during a call. 1. Press and hold 2. Select the record you want. 3. Press and hold during a call. again to exit phonebook. CALLING FROM THE PHONEBOOK You can make a call directly from the phonebook while you are viewing it. Calling directly from the phonebook See Calling from your phonebook on page 13. During a call You can send a number from the phonebook during a call. 1. Press and hold 2. Select the record you want. during a call.
- 18 -
3. Press OK to send the phonebook number or press and hold again to exit phonebook. Phonebook ADDING A RECORD NOTE: Memory Full. If your phonebook is full, a notification displays. Delete unnecessary records before adding new ones. 1. Press 2. Select PHONEBOOK ADD. Press OK. 3. Enter the name. Press OK. NOTE: Duplicate Name. Phonebook records with identical names cannot be saved. 4. Enter the number. TIP: Pause. Press and hold to insert a pause. 5. Press OK. Your new record is saved. EDITING A RECORD
. 1. Press 2. Select PHONEBOOK EDIT. Press OK. 3. Select the record you want to edit. Press OK. 4. Edit the name if necessary. Press OK. 5. Edit the number if necessary. Press OK. Your record is edited. DELETING A RECORD
. 1. Press 2. Select PHONEBOOK DELETE. Press OK. 3. Select the record you want to delete. Press OK. 4. Press OK to delete the record. The handset displays a confirmation request. 5. Press OK to confirm. The record is deleted. DELETING ALL RECORDS 1. Press 2. Select PHONEBOOK DELETE ALL. Press OK. The handset
. displays a confirmation request.
- 19 -
Phonebook 3. Press OK to confirm. All records are deleted.
- 20 -
Call Log The call log stores the call history of the last 20 incoming and the last 5 dialed calls. VIEWING THE CALL RECORDS 1. Press Press to view the incoming call log, or to view the dialed call log. 2. Select the record you want. 3. Press to see details. MAKING A CALL Returning a call To return a call from the incoming call log, see Calling from the incoming call log on page 13. Redialing a call To make a call that you have made previously, see Calling from the dialed call log on page 12. SAVING A CALL RECORD TO YOUR PHONEBOOK after selecting a call record. 1. Press 2. Select SAVE. Press OK. 3. Edit the name if necessary. Press OK. 4. Edit the number if necessary. Press OK. Your record is saved. DELETING A CALL RECORD 1. Press 2. Select DELETE. Press OK. The handset displays a confirmation after selecting a call record. request. 3. Press OK to confirm. The record is deleted. DELETING ALL RECORDS 1. Press 2. Select DELETE ALL. Press OK. The handset displays a after selecting a call record. confirmation request. 3. Press OK to confirm. All records are deleted.
- 21 -
Call Log
- 22 -
Custom Options Make this your handset change the look and sound to suit your needs and tastes. From the display to sound, this section shows you how to set your preference. PERSONALIZING YOUR PHONES DISPLAY Naming your handset Every handset can have its own name. It displays on the screen during standby. 1. Press 2. Select PERSONAL SET HANDSET NAME. Press OK. 3. Edit the name. Use BACK to make corrections. 4. Press OK when finished. The new setting is saved. Setting your language This section only applies to model(s) with multiple language support. Language is the text you see on the screen. 1. Press 2. Select PERSONAL SET LANGUAGE. Press OK. 3. Select the new setting. 4. Press OK when finished. The new setting is saved. Setting the backlit The backlit turns on when you press a key on the handset. 1. Press 2. Select PERSONAL SET BACKLIGHT. Press OK. 3. Select the new setting. 4. Press OK when finished. The new setting is saved. PERSONALIZING YOUR HANDSETS SOUNDS Setting your handsets ringer melody
. 1. Press 2. Select PERSONAL SET HANDSET TONE MELODY. Press OK. 3. Select the melody you want. 4. Press OK when finished. The new setting is saved.
- 23 -
Custom Options Setting your handsets ringer volume Your handset has 6 ringer volume levels (including ringer off). 1. Press 2. Select PERSONAL SET HANDSET TONE VOLUME. Press OK. 3. Select the volume level. 4. Press OK when finished. The new setting is saved. Setting the key tone Key tone is the sound you hear when you press a key on your handset. 1. Press 2. Select PERSONAL SET HANDSET TONE KEY BEEP. Press OK. 3. Select the new setting. 4. Press OK when finished. The new setting is saved.
- 24 -
Calling Features Your phone supports a number of call-related features to help you handle and manage your calls more effectively and conveniently. AUTO ANSWER Auto answer enables you to answer an incoming call by simply picking up the handset from the charging cradle. You do not need to press a key to answer the call. Activating/Deactivating auto answer
. 1. Press 2. Select PERSONAL SET AUTO ANSWER. Press OK. 3. Select the new setting. 4. Press OK. The new setting is saved. DIAL MODE Dial mode is the telephone signal used in your country. Your phone supports tone (DTMF) and pulse (rotary) dialing. For details, consult your service provider. Selecting dial mode
. 1. Press 2. Select ADVANCED SET DIAL MODE. Press OK. 3. Select the new setting. 4. Press OK. The new setting is saved. TIP: Temporary Tone Mode. If your phone is set to pulse dialing, press and hold during a call for temporary tone mode. d displays. Digits entered after d are sent out as tone signal (on this call only). RECALL SELECTION Recall is a signal that needs to be sent when using some of the calling features such as making or answering a second call. Your phone supports different recall signals. You can make changes depending on the requirements. For details, consult your service provider.
- 25 -
Calling Features Selecting recall duration
. 1. Press 2. Select ADVANCED SET RECALL TIME. Press OK. 3. Select the new setting. 4. Press OK. The new setting is saved. AREA CODE REMOVAL The area code feature automatically removes an area code of an incoming call. You can define an area code you want to remove. The phone number will be saved in the call log without the area code. Activating the area code
. 1. Press 2. Select ADVANCED SET AREA CODE. Press OK. 3. Enter the area code (any digit between 0-9). 4. Press OK when finished. The new setting is saved. Deactivating the area code
. 1. Press 2. Select ADVANCED SET AREA CODE. Press OK. 3. Use BACK to delete all the digits. 4. Press OK when finished. The new setting is saved. CID PREFIX This section only applies to model(s) with CID Prefix support. Some telephone providers send a CID prefix along with the CallerID. Consult your service provider on category number handling. To call back from the history properly, change setting to ON if your telephone service provider sends out a CID prefix, or change setting to OFF if the CID prefix is not sent. Setting category number
. 1. Press 2. Select ADVANCED CID PREFIX. Press OK. 3. Select the new setting. 4. Press OK. The new setting is saved.
- 26 -
Extra Features Discover and explore the additional features your phone offers! Find out how these features can benefit you and help you make the most from your phone. THE ALARM CLOCK Use your phone as an alarm clock to wake you up from your sleep. You can have different alarm settings for each handset. Setting the alarm clock
. 1. Press 2. Select CLOCK/ALARM SET ALARM. Press OK. 3. Select ON. Press OK. 4. Enter the alarm time. The clock is in 24-hour format. Press OK. The alarm clock is set. You see an alarm icon displayed. Turning off the alarm clock When the alarm clock rings 1. Press to turn off the alarm clock. NOTE: If you do not press any key after the alarm clock rings for 1 minute, it will turn off automatically. Before the alarm clock rings 1. Press 2. Select CLOCK/ALARM SET ALARM. Press OK. 3. Select OFF. Press OK. BABY CALL Baby call allows you to dial out a programmed number by pressing any key on the handset (except Activating baby call
). 1. Press 2. Select ADVANCED SET BABY CALL. Press OK. 3. Select ON. Press OK. 4. Enter or edit the number. Press OK.
- 27 -
Extra Features Deactivating baby call
. 1. Press 2. Select OFF. Press OK. KEYPAD LOCK You can lock the keypad to prevent accidental presses on the handset while you are carrying it around. Locking/Unlocking the keypad 1. Press and hold to lock and unlock the keypad. MISSING HANDSET(S) 1. Press on the base unit. All the handsets connected to this base unit ring. 2. Press on the base unit again to stop paging. All the handsets stop ringing, or Press any key to stop the paging of that handset. VOICEMAIL INDICATION NOTE: Voicemail Indication Service. Consult and subscribe from your service provider. Voicemail indication is a visual voicemail alert. On this phone, you see an envelope After youve listened to all the new messages, You can also turn it off manually, icon when there is a voicemail waiting in your mailbox(es). will turn off. 1. Reset the power of the base unit (Unplug the power adapter of 2. the base unit. Wait for 30 seconds. Plug in the power again.) If you still see the envelope icon, press and hold on each handset for 2 seconds during standby.
- 28 -
The System REGISTERING YOUR HANDSET WITH ADDITIONAL BASE This section shows you how to register your handset to additional base unit(s). If your handset displays UNREGISTERED, refer to Registering your handset on page 11. 1. Press and hold on the base unit for 4 seconds. on the handset. 2. Press 3. Select ADVANCED SET REGISTRATION. Press OK. 4. Enter the system PIN (Pre-set: 0000). Press BACK to make corrections. 5. Press OK. 6. Select the base number you want. A blinking digit indicates that the base number is already being used. Your handset starts searching for the base. If registration is successful, the signal icon along with the handset name. The base assigns a handset number to your handset. It is the digit displayed on the right margin of the screen. If registration failed, repeat the above procedure. displays steadily NOTE: Each handset can be registered to up to 4 base units. SELECTING A BASE UNIT You can switch your handset between different base units that it has registered to. For your convenience, you can program the handset to automatically connect to the closest base unit. You can also program the handset to only connect to a fixed base unit you have specified. 1. Press 2. Select ADVANCED SET BASE SELECT. Press OK. 3. Select the base unit you want or select AUTO if you want your handset to automatically connect to the closet base unit. 4. Press OK. The new setting is saved.
- 29 -
The System DELETING A HANDSET Use one handset to delete (de-register) another handset that shares the same base unit. 1. Press 2. Select ADVANCED SET DELETE HS. Press OK. 3. Select the handset (number) you want to delete. Press OK. 4. Enter the system PIN. Use BACK to make corrections. 5. Press OK. The handset is deleted. CHANGING THE SYSTEM PIN The system PIN is used for registering, deleting handsets, and protecting the access rights to some of the other menus. The pre-set system PIN is 0000. You can personalize the PIN for greater security. 1. Press 2. Select ADVANCED SET CHANGE PIN. Press OK. 3. Enter the system PIN. Use BACK to make corrections. Press OK to confirm. 4. Enter the new system PIN. Press OK. 5. Enter the new system PIN again for verification. 6. Press OK. The new setting is saved. NOTE: Forgotten PIN. Write down your PIN and save it for future use. If you have forgotten the PIN, call your manufacturer for RESETTING TO DEFAULT SETTINGS The default settings are the original factory settings of your phone. You can reset your phone settings to factory default. 1. Press 2. Select ADVANCED SET RESET. Press OK. 3. Enter the system PIN. Press OK to confirm. To find out what settings are being reset, see Default settings on page 31.
- 30 -
Appendix Alarm Clock Backlight Dial Mode CID Prefix Country setting Handset Name*
00:00 On Recall 1 Empty Unchanged DEFAULT SETTINGS These are the factory pre-programmed settings of your phone. General Setting Language Time Auto Answer Recall Duration Area Code number Phonebook*
Sounds Setting Handset Ringer Melody Alarm Ringer Melody Receiver Volume Call Log Setting Incoming Call Log*
System Setting Base Selection
* This setting is not restored after reset. Handset Ringer Volume Alarm Ringer Volume Handset Key Keep Melody 3 Melody 2 Medium Dialed Call Log*
Unchanged PIN Code Auto Unchanged Off On Tone Off Level 3 Level 3 On Unchanged 0000
- 31 -
Appendix TROUBLESHOOTING Problem No dialing tone Tip Check your phone connections. The handset may be out of range. Move closer. The battery capacity may be low. Charge battery. Signal icon flashing No parking tone Handset on the charger does not charge No display Bad audio (crackles, echo, etc.) The handset may be out of range. Move closer. If the handset displays Unregistered, register the handset. See page 11. The handset may not be placed properly. Try again. Charging contacts may be dirty. Clean contacts with a damp cloth. The battery may be defective. Purchase new battery from your dealer. Check that the battery is inserted correctly. Make sure the handset is placed properly on the base unit or charger. The battery icon is animated while charging. Check that the battery is charged. Check the connections. The handset may be nearly out of range. Move closer. The phone may be interfered by nearby electrical appliance. Move the base unit to a different location. The phone may be at a location with thick walls. Move the base unit to a different location. Handset does not ring Check that the handset ringer is turned on. See page 23. Caller ID does not display Caller ID service may not be activated. Check with your service provider. The callers information may be withheld or is unavailable. Cannot make/answer a 2nd call 2nd call service may not be activated. Check with your service provider. Check that the recall selection is correct. See page 25.
- 32 -
Appendix PHONE SPECIFICATIONS Specification Item Product name SYNER.G Frequency bands North America (UPCS): 1920-1930MHz Number of North America (UPCS): 60 channels channels Range Connection Standby time Talk time Rechargeable battery cells 300m outdoor, 50m indoor PSTN 120 hours 10 hours 2 x AAA, NiMH 650 mAh
- 33 -
Appendix Compliance Statement Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment Published by ACTA. Notification to the local telephone company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes This equipment may not be used on coin service provided by the telephone company. Party lines are subject to state tariffs, and therefore, you may not able to use your own telephone equipment if you are on a party line. Check with your local telephone company. Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Rights of the Phone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must:
I. II. III. promptly notify you of such temporary discontinuance ;
afford you the opportunity to correct the situation ; and inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference ; and (2) This device must accept and interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 o the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 34 -
Appendix This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference with not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
Reorient or relocate the receiving antenna ( that is, the antenna for radio or television that is receiving the interference). Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, How To Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-
000-00345-4 when ordering copies. Noise Electrical pulse noise is present at one time or another. This is most intense during electrical storms. Certain kinds of electrical equipment, such as light dimmers, fluorescent bulbs, motors, fans, etc., also generate pulse noise. Because radio frequencies are susceptible to this, you may on occasion hear pulse noise through the receiver. This is usually only a minor annoyance and should not be interpreted as a defect of the unit. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For hand held operation, this phone has been tested and meets the FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Hearing Aid Compatibility (HAC) This telephone system meets FCC and industry Canada standards for Hearing Aid Compatibility. Privacy Privacy of communications may not be ensured when using this telephone. Additional Information I.C. Notice Terminal Equipment NOTICE : This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number : the abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE : The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. Radio Equipment
- 35 -
Appendix The term IC : before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Do not attempt to repair or modify this equipment Repairs to certified equipment should be made by an authorized maintenance facility designated by the supplier. Any repairs or alterations made by the user to the equipment may render the equipment void in product warranty and compliance. This could also void the users authority to operate the equipment.
- 36 -
Appendix Service Centers USA Location :
Ascalade Communications 5077 W. Sunset Drive, Lake Oswego, OR 97035 Canada Location :
12051 Riverside Way, Richmond, BC Canada, V6W 1K7
- 37 -
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-12-20 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Class II permissive change or modification of presently authorized equipment |
2 | 2007-11-27 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | |
3 | 2007-02-01 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2007-12-20
|
||||
1 2 3 |
2007-11-27
|
|||||
1 2 3 |
2007-02-01
|
|||||
1 2 3 | Applicant's complete, legal business name |
Ascalade Technologies, Inc.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0004319729
|
||||
1 2 3 | Physical Address |
12051 Riverside Way
|
||||
1 2 3 |
Richmond, BC, N/A V6W 1K7
|
|||||
1 2 3 |
Canada
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 3 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
PBW
|
||||
1 2 3 | Equipment Product Code |
DT19R42
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J**** T******
|
||||
1 2 3 | Title |
Senior Engineering Manager
|
||||
1 2 3 | Telephone Number |
604-2********
|
||||
1 2 3 | Fax Number |
604-2********
|
||||
1 2 3 |
J******@ascalade.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1.9 ghz DECT TELEPHONE-BASE | ||||
1 2 3 | 1.9 GHZ DECT PSTN CORDLESS PHONE-BASE | |||||
1 2 3 | DECT PSTN CORDLESS PHONE - BASE | |||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 3 | Grant Comments | Power listed is conducted. Class II change incorporates new housing. | ||||
1 2 3 | Power listed is conducted. Class II change incorporates new housing. No other changes. | |||||
1 2 3 | Power Listed is Conducted. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Timco Engineering, Inc.
|
||||
1 2 3 | Name |
S****** S********
|
||||
1 2 3 | Telephone Number |
352-4********
|
||||
1 2 3 | Fax Number |
352-4********
|
||||
1 2 3 |
i******@timcoengr.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 68 | 1921.53600000 | 1928.44800000 | 0.0800000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0800000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15D | 68 | 1921.53600000 | 1928.44800000 | 0.0800000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC