| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
USERS MANUAL 1 | Users Manual | 709.17 KiB | February 04 2008 / March 04 2008 | |||
| 1 |
|
USERS MANUAL 2 | Users Manual | 1.76 MiB | February 04 2008 / March 04 2008 | |||
| 1 | Cover Letter(s) | February 04 2008 / March 04 2008 | ||||||
| 1 | Cover Letter(s) | February 04 2008 / March 04 2008 | ||||||
| 1 | External Photos | February 04 2008 / March 04 2008 | ||||||
| 1 | Internal Photos | February 04 2008 / March 04 2008 | ||||||
| 1 | ID Label/Location Info | February 04 2008 / March 04 2008 | ||||||
| 1 | RF Exposure Info | February 04 2008 / March 04 2008 | ||||||
| 1 | RF Exposure Info | February 04 2008 / March 04 2008 | ||||||
| 1 | Test Report | February 04 2008 / March 04 2008 | ||||||
| 1 | Test Report | February 04 2008 / March 04 2008 | ||||||
| 1 | Test Setup Photos | February 04 2008 / March 04 2008 | ||||||
| 1 | Attestation Statements | February 04 2008 / March 04 2008 |
| 1 | USERS MANUAL 1 | Users Manual | 709.17 KiB | February 04 2008 / March 04 2008 |
DHA-130 IP/DECT Phone User Guide PACKAGE CONTENTS .................................................................................................................................................................................................................................................. 1 REQUIREMENTS FOR SETUP AND CONNECTION............................................................................................................................................................................................................. 1 INTRODUCTION........................................................................................................................................................................................................................................................... 2 FEATURES AND BENEFITS.................................................................................................................................................................................................................................................. 2 HARDWARE OVERVIEW BACK PANEL................................................................................................................................................................................................................. 3 LED INDICATORS FRONT PANEL ............................................................................................................................................................................................................................... 4 HANDSET DESCRIPTION...................................................................................................................................................................................................................................................... 5 GETTING STARTED..................................................................................................................................................................................................................................................... 6 USING THE HANDSET................................................................................................................................................................................................................................................... 7 Handset Control Keys ................................................................................................................................................................................................................................................................8 CONNECT TO D-LIFE ................................................................................................................................................................................................................................................... 9 View D-Life Account Number ............................................................................................................................................................................................................................. 10 INCOMING CALLS ...................................................................................................................................................................................................................................................... 11 Use Speaker Phone ........................................................................................................................................................................................................................................... 13 Putting Calls on Hold................................................................................................................................................................................................................................................................ 13 Call Waiting .............................................................................................................................................................................................................................................................................. 14 3-Way Conference Calls .......................................................................................................................................................................................................................................................... 15 Intercom ................................................................................................................................................................................................................................................................................... 18 MAKING CALLS ......................................................................................................................................................................................................................................................... 19 Calling a Phone Book Entry ..................................................................................................................................................................................................................................................... 19 Using Quick Dial....................................................................................................................................................................................................................................................................... 21 Dialing a New Number ............................................................................................................................................................................................................................................................. 24 D-Life VoIP Calls to PSTN Numbers.................................................................................................................................................................................................................. 25 D-Life VoIP Calls to Other D-Life Accounts........................................................................................................................................................................................................ 26 Local PSTN Phone Calls.................................................................................................................................................................................................................................... 27 Phone Network Settings..................................................................................................................................................................................................................................... 28 View Host Station IP Address............................................................................................................................................................................................................................. 28 View Host Station IP Address PPPoE Connection.......................................................................................................................................................................................... 29 Using the Phonebook......................................................................................................................................................................................................................................... 30 View Names in Phonebook ...................................................................................................................................................................................................................................................... 30 Add Names to Phonebook ....................................................................................................................................................................................................................................................... 31 Check Memory Status .............................................................................................................................................................................................................................................................. 32 Using Call Logs .................................................................................................................................................................................................................................................. 33 Clear Log Entries ..................................................................................................................................................................................................................................................................... 35 CHANGE NETWORK SETTINGS ................................................................................................................................................................................................................................... 36 Configure a Static IP Address ............................................................................................................................................................................................................................ 36 Setup A PPPoE Network Connection................................................................................................................................................................................................................. 41 Handset Settings................................................................................................................................................................................................................................................ 44 Change Sound Settings ........................................................................................................................................................................................................................................................... 44 Change Time and Date Settings .............................................................................................................................................................................................................................................. 50 Change Language Setting........................................................................................................................................................................................................................................................ 55 Change Call Service Settings................................................................................................................................................................................................................................................... 56 Change Contrast Setting.......................................................................................................................................................................................................................................................... 57 Handset Extras................................................................................................................................................................................................................................................... 58 Base Station Settings ......................................................................................................................................................................................................................................... 60 Adding New Handsets.............................................................................................................................................................................................................................................................. 60 Change Base Station ............................................................................................................................................................................................................................................................... 64 Delete Handset ........................................................................................................................................................................................................................................................................ 66 Reset Base Station................................................................................................................................................................................................................................................................... 67 Change PIN.............................................................................................................................................................................................................................................................................. 68 USING THE WEB UTILITY ........................................................................................................................................................................................................................................... 69 Maintenance............................................................................................................................................................................................................................................................................. 72 Status ....................................................................................................................................................................................................................................................................................... 73 TECHNICAL SPECIFICATIONS ................................................................................................................................................................................................................................ 75 ROUTER PORT CONFIGURATION .................................................................................................................................................................................................................................... 78 Opening Ports on Routers and Gateways.......................................................................................................................................................................................................... 78 How to Manually Open Ports on a Router ......................................................................................................................................................................................................... 79 TROUBLESHOOTING ...................................................................................................................................................................................................................................................... 80 LCD DISPLAY ICONS ................................................................................................................................................................................................................................................ 81 Package Contents D-Link DHA-130 IP/DECT Phone D-Link DHA-130 Base Station Power Adapter-AC 12V AC, 1200 mA Manual and Warranty on CD Quick Installation Guide Ethernet Cable (the DHA-130s Ethernet port is Auto-MDIX) Caution: Using a power supply with a different voltage rating than the one included with the DHA-130 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Requirements for Setup and Connection System (Minimum)
Broadband Internet connection
Ethernet-Based Cable or DSL Modem
A multi-port Ethernet router (preferably configured as a DHCP server)
Computer with Windows, Macintosh, or Linux-based operating system and an installed Ethernet adapter
Internet Explorer Version 6.0 or Netscape Navigator Version 6.0 and Above
VoIP Services Account The user must first establish a D-Life account online. Please go to www.dlife.com to setup your account if you have not done so. 1 Introduction Before you start, your new DHA-130 IP/DECT Phone will require a multi-port Ethernet router to function and broadband Internet connection. Ideally the router should be configured as a DHCP server in order to simplify setup. Your new DHA-130 IP/DECT Phone will enable you to make VoIP (Voice over Internet Protocol) telephone calls at a zero or very much reduced cost when compared to regular telephone service to nearly anywhere, over the Internet. In addition the phone can be used for regular PSTN telephone service. With a D-Life account established, the Phone can simply be connected and used after a brief automatic configuration procedure. This auto-provisioning feature makes the DHA-130 a truly Plug and Play IP phone. Features and Benefits Automatic provisioning for Plug and Play VoIP setup Dialing via PSTN to standard telephone numbers Dialing via Ethernet port as VoIP calls. 10/100BASE-TX Fast Ethernet port for network connection Voice Activity Detection (VAD) /Comfort Noise Generation (CNG) Configurable comfort noise insertion and handset echo cancellation Audio Compression: G.711, G.729A/B, G.723.1, G.726, G.729, G.722, G.722.1, iLBC PPPoE, Static IP, DHCP Client support Support TCP/IP, UDP, RTP and RTCP Lost packet recovery ability for improved voice quality Adjustable speaker / ringer volume control Dialing by last 10 calls Call Log (Missed, Received, Dialed) Call Hold/Call Transfer/3-way Conference 2 Hardware Overview Back Panel Phone Connection Connect to your PSTN phone line using standard phone cabling. LAN Port Connect the Ethernet cable from your router to this port. LAN Port LEDs Use the LAN port LED indicators to check link status and port speed. The right side LED lights steady green for a valid link and blinks green when there is activity on the port. The left side LED lights amber when the port speed is 100 Mbps, it is dark for a 10 Mbps connection. Factory Reset Button Pressing this button will restore the DHA-130 to its factory default settings. Power Adapter Connect your 12V AC 1.25 A power adapter here. 3 PSTN A steady amber light indicates the PSTN line is connected. This will be dark if there is no PSTN link. LED Indicators Front Panel If both LED indicators are dark, check to make sure the power adapter is connected and plugged in to a power source. Press to set off ringer the handset. Page Button Off Hook A steady green light indicates the phone is off the hook. A blinking green light indicates an incoming call. The light is dark when the phone is on the hook. VoIP A steady green light indicates the D-Life connection is established. A blinking green light indicates the phone is undergoing VoIP provisioning. 4 Handset Description Earpiece 1. 2. Navigation Key - scrolls up/down through menus. When the D-Life desktop is displayed, push down to access phone records, push up to access D-Life phonebook menu. Left Soft Key use to select highlighted menu option, perform corresponding function in display 3. 4. Talk Key - to place/receive a call 5. Mode Key Switch between D-Life VoIP call mode and PSTN call mode. 6. Number Keypad - to enter numbers/characters 3 7. Key/Switch Key - to key in * (asterisk), hold a few seconds to silence the ringer LCD Display 8. 9. Right Soft Key - performs the displayed function, return to previous menu (Back) 10. Power Key - to switch the phone on/off, end a call or return to standby mode. 11. Key/Lock Key - to key in # (pound) or to lock the keypad. Hold a few seconds to lock/unlock the handset. 12. Services Key 13. Microphone 14. Intercom Key 1 8 2 9 10 11 12 13 5 5 4 6 7 14 Getting Started BEFORE YOU BEGIN!
Make sure you have a broadband Internet connection, a multi-port Ethernet router such as a broadband router or ADSL router, and an active D-Life account already setup. If you do not have a D-Life account yet, access the D-Life website (www.dlife.com) and set up an account first. For information on using a broadband or ADSL router with the Phone, please read Appendix B Router Port Configuration on page 78. The DHA-130 is very easy to setup and use. Connect the phone line and Ethernet cable as illustrated in the Back Panel picture. Connect the power and the Phone will begin to establish the connection to the D-Life account server. This process is called provisioning. During the provisioning, the green VoIP LED indicator on the front of the base station will blink. When the account has been verified and the Phone is ready to use, the VoIP LED indicator will shine steady green. 6 Using the Handset Most of the commonly used functions, for making and receiving calls and storing phone numbers, are controlled using the Soft Keys and Navigation Button on the handset. The right and Left Soft Keys are used to perform an action or option listed on the bottom right or left side of the LCD display. The Navigation Button is used to scroll through menus and other entry functions. When the phone is idle and its default desktop is displayed (like the example below), the Navigation Button is used to access the most commonly used menus and phone book. To use the handset interface, use the Soft Keys (Right Soft Key and Left Soft Key) to select the corresponding action or option listed on the bottom of the display. For example, in the handsets desktop display shown below, press the Right Soft Keys to use the Names option used to view the phone book. Since this is the first time setting up the phone, of course the phone book is empty. To register the handset with the base station you will need to first access the Main Menu. Indicates DECT phone connection to the base station, this will flash until a connection is made. D-Life 1 Indicates the radio channel number used for the DECT phone connection to the base station. 05:00 Names Use the Right Soft Key to choose the option or action at the bottom of the right side of the LCD menu, in this example, pressing the Right Soft Key allows you to view the Names of people in your Phone Book. 7 01/01 Menu Use the Left Soft Key to choose the option or action at the bottom of the left side of the LCD menu, in this example, pressing the Left Soft Key allows you to view the Main Menu. Handset Control Keys The primary control keys for the handset, the soft keys and navigation button, are illustrated here for your reference. Left Soft Key Right Soft Key Navigation Button From the desktop:
Up Arrow D-Life Phone Book Down Arrow Handset Phone Book Left Arrow Calls Dialed Right Arrow Calls Received 8 Connect to D-Life The DHA-130 is configured with all the necessary account information including the D-Life account number. If the phone can successfully connect to the Internet, it will automatically establish a connection to the D-Life servers. When D-Life service is established, the LCD indicator on the handset displays D-Life in the center of the screen, it is ready to use. 1 D-Life 01/01 Menu 00:15 Names The DHA-130 uses DHCP for to get its network settings. If you are using a broadband or DSL router as a DHCP server for your network, the phone should have no problem establishing a connection to the Internet. Make sure that the DHCP server (router) is configured with the correct IP settings for DNS service and gateway IP settings. Typically the gateway IP address is the routers IP address when there are no other routers or gateway routers used. The ISP usually supplies the DNS IP addresses. The phone can be configured to use a static IP address on the local network. It can also be configured to directly access the Internet through your ISP using PPPoE (user name and password). See the description below to change the phones network settings. 9 View D-Life Account Number To view the account number and phone number for your DHA-130, from the Main Menu go to System > D-Life No. The sequence of display screens you will see are simulated below. Select D-Life No. View D-Life account/phone number. MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT SYSTEM HOST IP NETWORK SETTINGS D-Life No. OK EXIT 42001111 OK D-Life No. 10 Incoming Calls The procedures used when answering calls from D-Life VoIP stations or PSTN calls are identical. The main difference is that the LCD display will indicate that the incoming call is a VoIP call or PSTN call. The number of the caller appears as well as the type of call ([i] for VoIP IP call and [P] for PSTN).
[i]
123456 04/03 ANSWER 12:15 SILENT To answer the call immediately either press the Talk Key, or the Left Soft Key. Press the Right Soft Key to silence the ringer but not answer the call. When the call has been answered, a timer for the call appears, as well as OPTIONS that can be viewed using the Left Soft Key. The call can be muted so the call 11 is silenced from the handset while allowing voice and sound to still come through from the other end. To MUTE the handset, press the Right Soft Key while the call is active.
[i]
[i]: 123456 Use the Left Soft key to view the options available while the call is active. OPTIONS 00:00:04 MUTE OPTIONS SPEAKER HOLD LINE HS PHONEBOOK
OK EXIT 12 Use Speaker Phone While a call is active, the handset can be used in speakerphone mode. Simply choose the SPEAKER option in the OPTIONS menu during the call for hands free speaker mode. Putting Calls on Hold To put the active line on hold, use the HOLD LINE option in the OPTIONS menu. While one line is on hold, another incoming call can be answered just like a conventional multiple line PSTN telephone. When a line is on hold, the H icon appears in the main display. If multiple lines are active, the icon will indicate which line is on hold. OPTIONS SPEAKER HOLD LINE HS PHONEBOOK
OK EXIT OPTIONS SPEAKER HOLD LINE HS PHONEBOOK
EXIT OK 13 Call Waiting When an incoming call occurs while another call is active, the incoming call can be answered while placing the active call on hold automatically. Current call information does not flash in the display.
[i] [P]
[i]: 123456
[P]: 5558961 00:00:35 ANSWER Incoming call indicated by flashing indicator
(flashing [i] for VoIP, flashing [P] for PSTN) The name and number of the unanswered incoming call flashes. To answer the incoming call and simultaneously place the active call on hold, press the Left Soft Key to ANSWER the incoming call. The original call will be on hold, this is indicated by the H1 icon indicating that line 1 is on hold. MUTE MUTE P
[P]: 5558961 00:00:02 OPTIONS Use the Left Soft Key to view the options, including the option to switch back to the original caller. 14 To return to the original call, use the SWITCH CALLS option in the OPTIONS menu. Switching to the other line will put the second call on hold while taking the original call off hold. OPTIONS SPEAKER RELEASE & HOLD SWITCH CALLS CONFERENCE EXIT OK 3-Way Conference Calls Conference calls can be held when both lines have active calls. To use the 3-way conference call function, go the OPTIONS menu when both lines are connected
(one or both lines can be on hold).
[P]
[i]: MOM/123456
[P]: BOB/5558961 00:00:35 OPTIONS MUTE It will be necessary to choose to put one call in conference mode, switch to the other line, then place that call in conference mode. 15 First choose the CONFERENCE option for one line. Then SWITCH CALLS to the other line. And put the other line in CONFERENCE mode. OPTIONS SPEAKER RELEASE & HOLD SWITCH CALLS CONFERENCE EXIT OK OPTIONS SPEAKER RELEASE & HOLD SWITCH CALLS CONFERENCE EXIT OK OPTIONS SPEAKER RELEASE & HOLD SWITCH CALLS CONFERENCE EXIT OK 16 The display indicates that the handset is in CONFERENCE mode. To end the conference call or select one line to leave the conference call, bring up the OPTIONS menu again.
[i] [P]
CONFERENCE 00:12:37 OPTIONS MUTE OPTIONS SPEAKER END CALL 1 END CALL 2 END ALL CALLS EXIT OK Select the option to END ALL CALLS if you want to terminate calls on both lines. Or choose to END CALL 1 or END CALL2 to return to single call mode with the remaining line. 17 Intercom The DECT phone features handset-to-handset intercom. To use the intercom, press the Intercom button on the handset. INTERCOM HANDSET 1 HANDSET 2 HANDSET 3 HANDSET 4 OK CANCEL The display indicates the handset being paged. To terminate the intercom session, use the CANCEL option. HANDSET 3 CANCEL 18 Making Calls Calls can be made using phone book entries. Frequently used numbers can be added to the Quick Dial list. Calls can also be dialed if they do not appear in your logs or phone book. This section describes how to do all of these. Calling a Phone Book Entry 1. To call a number that is already in the phone book, simply choose NAMES from the desktop display. PHONE BOOK HANDSET D-Life
OK EXIT 2. Choose the HANDSET or D-Life phonebook. 3. Select the number to call and choose DETAILS. HANDSET VIEW RECORD NEW ENTRY QUICK DIAL MEMORY STATUS OK EXIT HANDSET
[i] ALICEB
[P] BOBK
[i]CAROLD
[P]DENNYJ DETAILS EXIT 19 4. Choose OPTIONS. 5. Choose the HANDSET or D-Life phonebook. 6. Select DIAL to call the number. MOM
[i]123456 OPTIONS DETAILS EXIT OPTIONS USE NUMBER EDIT DELETE OK EXIT 123456 DIAL DELETE 20 Using Quick Dial Frequently used numbers can be designated Quick Dial numbers. Quick Dial numbers require pushing only a single button for a few seconds to dial. To place a Quick Dial call, press the number on the keypad assigned to the Quick Dial number. Keys 4 through 9 are used for Quick Dial. To designate a number as a Quick Dial number, it must already be in the Handset phone book. Follow the steps below to set up a Quick Dial entry. 1. Choose NAMES from the desktop display then go to the HANDSET phone book. 2. Choose the QUICK DIAL. PHONE BOOK HANDSET D-Life
OK EXIT HANDSET VIEW RECORD NEW ENTRY QUICK DIAL MEMORY STATUS OK EXIT 3. Select the number to call and choose CHANGE to add a number from the Handset phone book. KEY 4 CHANGE EMPTY EXIT 21 4. The HANDSET phone book appears. Scroll to the name you want to add to the empty Quick Dial slot.
[P] BOBK
[i]CAROLD
[P]DENNYJ
[i]MOM DETAILS MOM
[i]123456 DEFAULT OK HANDSET DETAILS EXIT LIST KEY 4 EMPTY CHANGE EXIT 5. The HANDSET phone book appears. Choose OK to assign this number to the Quick Dial slot or choose LIST to go back to the HANDSET phone book. 6. To add new Quick Dial numbers for the remaining keys (5 to 9), use the up and down navigation buttons on the handset to get to the remaining Quick Dial slots. 7. To edit or delete a Quick Dial entry, go to NAMES>HANDSET>QUICK DIAL and scroll to the key you want to edit or delete using the navigation button 22 on the handset. The number appears listed as in the example below. Choose OPTIONS to edit or delete the Quick Dial entry. MOM
[i]123456 OPTIONS KEY 4 EXIT 8. Select CHANGE to go to the Handset phone book listed entries and select a new number for the Quick Dial slot. Choose DELETE to remove the Quick Dial assignment, you will be asked to CONFIRM? The decision to delete in a new screen. OPTIONS CHANGE DELETE OK EXIT 23 Dialing a New Number Phone calls can be made through D-Life VoIP or the regular PSTN telephone network. To make VoIP calls, make sure the handset is in VoIP mode. Use the Mode button to toggle between VoIP mode and PSTN mode. The mode is indicated in the LCD main display. The i icon indicates the phone is in VoIP mode. The P icon indicates the phone is in PSTN mode. 10/01 Menu 10/01 Menu 1 1 D-Life 05:18 Names 05:18 Names 24 D-Life VoIP Calls to PSTN Numbers To place a D-Life VoIP call to a PSTN number, use the number keypad to enter the phone number using the following format:
Use the country code even when calling a number in the same country as where you are located. For example, to dial the number 555-1234 in the 212 area code in the United States, enter as follows:
country code + area code + phone number 00121255551234 10/01 DIAL 05:20 DELETE Then press the green call button on the phone or choose DIAL to initiate the phone call. You will hear the phone ring on the other end just as if calling through the traditional switched telephone network. If the line is busy, you will hear a normal busy signal, otherwise the ring will continue until the phone is answered at the remote end. 25 D-Life VoIP Calls to Other D-Life Accounts To place a D-Life VoIP call to other D-Life account numbers, simply enter the account number and press the green call button on the phone or choose DIAL. 4200105 10/01 DIAL 05:21 DELETE As with regular PSTN phone calls, you will hear the phone ring on the other end. If the line is busy, you will hear a normal busy signal, otherwise the ring will continue until the phone is answered at the remote end. 26 Local PSTN Phone Calls To place a local call through the regular PSTN network without using VoIP, the phone must be in PSTN mode. Press the Mode button on the handset, notice the P icon appears in the main display and the D-Life can no longer be seen. 1 10/01 Menu 05:27 Names To place a local PSTN call, enter the number you want to dial and press the green call button on the phone or choose DIAL to initiate the phone call. 555-1234 10/01 Menu 05:27 Names 27 Phone Network Settings There are two methods available to change the IP settings of the base station unit. The IP settings can be changed using the handset or by accessing the DHA-130 web manager configuration utility. Read Using the Web Utility for information on change the network IP settings of the DHA-130. View Host Station IP Address 1. To view the IP address of the phone, go to the Main Menu and use the left soft key to press OK and choose the first item in the list, the Settings menu. MAIN MENU SYSTEM n CALL LOGS SETTINGS EXTRAS OK EXIT 2. In the SYSTEM menu, choose the first item in the list HOST IP to see the local IP address on the base station. If you are not using a DHCP server on your LAN and this is the first time setting up the phone, it will be necessary to change the network settings to assign a static IP address to the phone. SYSTEM HOST IP n NETWORK SETTINGS D-Life No. OK EXIT 3. The IP address of the base station as assigned appears listed in the Host IP display. This is the IP address you can use to access the web management configuration utility. Above the IP address the network setting is displayed. For example, if the DHA-130 is using DHCP from the local DHCP server 28
(broadband or DSL router), the LCD display will look similar to this example:
HOST IP
[DHCP]
192.168.1.48 OK View Host Station IP Address PPPoE Connection There are two methods to view the IP address if the phone is configured for PPPoE connection. Use either the SYSTEM menu and choose HOST IP, or use the NETWWORK SETTINGS menu and choose PPPoE to view a display similar to the example below. This only works if the phone is already configured for PPPoE. To configure the phone for PPPoE, please read ! below. HOST IP
[PPPoE]
172.18.167.48 OK 29 Using the Phonebook Phone numbers can be stored in the phonebook by entering them manually or after calling or receiving a call. Use Call Logs to store phone numbers you have dialed or received. See Using Call Logs for a description on how to store dialed and received numbers. Up to one hundred phonebook entries can be stored. To enter phone numbers manually, access the phonebook from the desktop D-Life display. There are two ways to access the phone book, use the navigation key or use the Left Soft Key to click Names option. This brings up the PHONE BOOK menu where you can select either the Handset phone records or the D-Life phone records. The navigation key arrows can be used to go directly to the D-Life phone book or the Handset phone book. From the desktop, use the navigation key to press the Down arrow to view the Handset Phone Book record menu, press the Up arrow to view the D-Life Phone Book record. PHONE BOOK HANDSET D-Life
OK EXIT View Names in Phonebook If you have already entered phone numbers you can select the VIEW RECORD option to Handset view phone book entries. The phonebook entries are listed alphabetically. To dial a number in the phonebook, scroll to the name you want to call and press the call button with the name highlighted. NAMES > HANDSET > VIEW RECORD HANDSET VIEW RECORD NEW ENTRY QUICK DIAL MEMORY STATUS OK EXIT HANDSET
[i] ALICEB
[P] BOBK
[i]CAROLD
[P]DENNYJ DETAILS EXIT 30 Add Names to Phonebook 1. To create and new phone book entry, scroll down to select the NEW ENTRY option and press the Left Soft Key. 2. Enter a name for the phone book entry, use the numbered keypad to key in upper case characters of the alphabet. NEW ENTRY HANDSET VIEW RECORD NEW ENTRY QUICK DIAL MEMORY STATUS OK EXIT NAME:
_ OK 3. Letters from the alphabet are listed in alphabetic order on keys 2 to 9, press the key once to display the first letter listed on the key, press it twice to display the second letter listed, and so forth. To choose a displayed letter, do not press any keys for a few seconds until the flashing cursor moves ahead one space. If you made a mistake, click the Right Soft Key to DELETE one space each time it is pressed. When satisfied with the name as it appears listed in the display, use the Left Soft Key to OK the name. You will see a new menu to enter the number. DELETE NEW ENTRY NAME:
AGUYIKNOW_ OK DELETE 31 4. Now enter the phone number as it will be dialed. Press OK (with the Left Soft Key) to create the new entry. This number now appears in the Handset Phone Book and can be selected for quick dialing or dialed using the Handset Phone Book. Check Memory Status The handset has 100 memory slots available for phone book entries. To view how many slots are available, select the MEMORY STATUS option from the Handset menu NAMES > HANDSET > MEMORY STATUS. NEW ENTRY NUMBER:
123456_ OK DELETE MEMORY STATUS USED: 023 FREE: 077 OK 32 Using Call Logs To view records of calls missed, dialed or received got to:
MAIN MENU>CALL LOGS>MISSED to view missed calls.
MAIN MENU>CALL LOGS>DIALED to view calls that have been dialed from the handset.
MAIN MENU>CALL LOGS>RECEIVED to view incoming calls that have been answered. 1. To access the handset phone log menus, go to the MAIN MENU, then to the CALL LOGS menu MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS 10/15 OK 05:35 EXIT CALL LOG MISSED DIALED RECIEVED CLEAR LOG 10/15 05:35 OK EXIT 2. In the CALL LOGS menu you can view numbers dialed, received and missed. Any of these numbers can be entered into the phone book. The procedure to view logs and entry of numbers into the phonebook is identical for MISSED, DIALED and RECEIVED calls logged. 33 3. For example, go to the DIALED call log to see what numbers have been called using the handset. To view the time and date a number was dialed, scroll to select the number and use the DETAILS option. 4. The number dialed, time and date of the call are listed in the display. The number can then be saved. 5. To save the number in the phone book, use OPTIONS to go to the save or delete options menu. DIALED
[i]0012125551234
[i]0012125550303
[i]0012125550022
[P]3125550011 DETAILS DIALED
[i]0012125551234 18:00:00 2007/10/16 OPTIONS EXIT EXIT OPTIONS SAVE DELETE OK EXIT 6. Use the SAVE option to create a new phone book entry for this number. The procedure is similar to creating a new entry in the phone book, except you already have the number. Use DELETE to remove this single entry from the call log. 34 7. You will need to enter a name, just using the numbered keypad and OK CALL LOG NAME:
_ OK DELETE Clear Log Entries The call logs can be cleared (deleted) for all missed, dialed or received calls recorded in the logs. To clear log records go to MAIN MENU>CALL LOGS>CLEAR LOGS and choose the log category to be cleared. You will be prompted to CONFIRM? That you want to clear the log. CLEAR LOG MISSED DIALED RECEIVED OK EXIT 35 Change Network Settings To change the network settings to use a Static IP address, to use PPPoE (user name and password) or to use the factory default network setting, DHCP, use the following menu progression: MAIN MENU>SYSTEM>NETWORK SETTINGS and choose the network connection. The first example below illustrates first how to establish a Static IP Address. The example after that one shows how to set up a PPPoE connection. Configure a Static IP Address To assign a Static IP address for the phone, do the following:
1. To change the local network IP settings for the DHA-130, go to the Network Settings menu. In the Main Menu choose SYSTEM. MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT 2. In the SYSTEM menu, choose NETWORK SETTINGS to see options for changing IP settings. SYSTEM HOST IP NETWORK SETTINGS D-Life No. OK EXIT 36 3. In the NETWORK SETTINGS menu, choose STATIC IP to go to the IP address entry menu for Static IP address. NETWORK SETTINGS DHCP STATIC IP PPPoE 4. A prompt asks if you really want to manually configure the IP address. OK EXIT STATIC IP SET MANUALLY?
YES NEXT 37 5. Enter the static IP address that will be used for the DHA-130 on the LAN. IP address must be entered using the numbers on the keypad of the handset in the form xxx.xxx.xxx.xxx so that all spaces are occupied by a numeral. For example, to enter a static LAN IP address 10.1.1.252, key the numbers as 010.001.001.252, there is no way to enter the . portion of the IP address using the handset. Use DELETE to remove unwanted numbers form the menu as displayed. Press OK when you are satisfied with the IP address as it appears. STATIC IP IP ADDRESS:
005.044.082.100 OK DELETE STATIC IP IP ADDRESS:
010.001.001.252 Press DELETE to remove the IP address listed in the Static IP menu. Enter the new IP address using the numbers on the keypad. OK DELETE 6. Use the standard subnet mask offered by choosing OK, or change it using the same method used to change the IP address. STATIC IP SUBNET MASK:
255.000.000.000 OK DELETE 38 7. Enter the primary DNS server IP address - usually this address is supplied by the ISP. Press OK to go to the next entry menu. STATIC IP 168.095.001.001 DNS1:
OK DELETE 8. Enter the secondary or backup DNS server IP address. Usually this address is supplied by the ISP. Press OK to save the new IP settings and restart the base station. STATIC IP 168.095.001.002 DNS2:
OK DELETE 9. The LCD menu informs you that the DHA-130 base station is rebooting. It will take one or two minutes to restart and establish the D-Life connection. STATIC IP REBOOTING PLEASE WAIT OK DELETE 10. A successful connection is indicated when D-Life appears in the main screen. The phone is now ready for use. 39 D-Life 1 05:18 Names 10/01 Menu 40 Setup A PPPoE Network Connection To configure the phone to use a PPPoE network connection, perform these steps:
1. To set up PPPoE configuration for the DHA-130, go to the Network Settings menu. In the Main Menu choose SYSTEM. MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT 2. In the SYSTEM menu, choose NETWORK SETTINGS to see options for changing IP settings and PPPoE configuration. SYSTEM HOST IP NETWORK SETTINGS D-Life No. OK EXIT 3. In the NETWORK SETTINGS menu, choose PPPoE to go to the user name and password entry menu for PPPoE connection. NETWORK SETTINGS DHCP STATIC IP PPPoE OK EXIT 41 4. A prompt asks if you really want to configure a PPPoE connection. PPPoE ENABLE PPPoE?
YES No 5. A new prompt asks for the user name. Enter the user name for the PPPoE connection. Use the keypad to enter letters and numbers, Letters from the alphabet are listed in alphabetic order on keys 2 to 9, press the key once to display the first letter listed on the key, press it twice to display the second letter listed, and so forth. To choose a displayed letter, do not press any keys for a few seconds until the flashing cursor moves ahead one space. PPPoE NAME:
test_ OK DELETE PPPoE NAME:
ipphoneuser@viopnet.com OK DELETE PPPoE PASSWORD:
5-A. Press DELETE to remove one character at a time. 5-B. Enter the new user name using the keypad and select OK to go to the password entry menu. If you made a mistake, click the Right Soft Key to DELETE one space each time it is pressed. The zero key is used to enter the @ symbol. 5-C. Enter the password using the keypad and select OK to restart the base station. 6. The LCD menu informs you that the DHA-130 base station is rebooting. It will take one or two minutes to restart and establish the D-Life connection. OK DELETE 42 PPPoE REBOOTING PLEASE WAIT 7. A successful connection is indicated when D-Life appears in the main screen. The phone is now ready for use. D-Life 2 05:18 Names 10/01 Menu 43 Handset Settings Settings for the handset include settings the time and date that appears in the display and the format used to display it; the melody and volume of the ringer for intercom, PSTN and IP phone calls, interface language and call services. To change any of these go to the Settings menu from the Main Menu as shown in the example here. Change Sound Settings Ringer tones can be customized so you know what type of call is incoming. The ringer tone can be changed to a unique style to distinguish if the call is a VoIP, PSTN or Intercom calls. The Sound settings menu is also used to turn on and off the tone for the keyed entries (key tone) and to turn on and off the tone made by the handset for events other than incoming calls, for example, the handset will make a noise when it is placed in the base station recharging cradle (handset tone). The Sounds menu options also include an Equalizer menu for enhanced treble or enhanced bass tones. Change Ringer Tone The procedure to change ringer tones for VoIP, PSTN and Intercom calls is identical except that each ringer type has a separate menu in the accessed from the Sounds menu.
To change the volume or melody of the VoIP ringer, go to SETTINGS>SOUNDS>VoIP RINGER.
To change the volume or melody of the PSTN ringer, go to SETTINGS>SOUNDS>PSTN RINGER.
To change the volume or melody of the Intercom ringer, go to SETTINGS>SOUNDS>INTERCOM RINGER. See the example below on how to change the VoIP ringer. 44 Change VoIP Ringer To change the volume or melody of the VoIP ringer, go to SETTINGS>SOUNDS>VoIP RINGER. 1. Go to the SETTINGS menu MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT 2. Go to the SOUNDS menu 3. Choose VoIP RINGER. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES EXIT OK SOUNDS VoIP RINGER PSTN RINGER INTERCOM RINGER CALL SERVICES EXIT OK 45 4. Now use the right and left arrows of the navigation button to adjust the volume and melody. The phone responds with an audible example of the change being made. That is, when the volume is increased, the ringer will ring at that increased volume for a second. Likewise, when scrolling through the melody options, the melody or ring tone will play briefly. VoIP Ringer
<VOLUME 3>
<MELODY 4>
OK CANCEL Turn On/Off Key Tone To turn off key tones (the noise produced when a key is pressed on the handset), go to SETTINGS>SOUNDS>KEY TONE. To turn key tone on or off:
1. Go to the SETTINGS menu 2. Go to the SOUNDS menu MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES EXIT OK 46 3. Choose KEY TONE. 4. Choose to turn the key tone ON or OFF and press OK. SOUNDS VoIP RINGER PSTN RINGER INTERCOM RINGER KEY TONE OK EXIT KEY TONE ON OFF
OK CANCEL MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT Turn On/Off Handset Tone To turn off key tones (the noise produced when settings changes are changed or the handset is returned to its re-charger on the base station), go to SETTINGS>SOUNDS>HANDSET TONE. To turn key tone on or off:
1. Go to the SETTINGS menu 47 2. Go to the SOUNDS menu 3. Choose HANDSET TONE. 4. Choose to turn the handset tone ON or OFF and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK PSTN RINGER INTERCOM RINGER KEY TONE HANDSET TONE OK EXIT EXIT SOUNDS HANDSET TONE ON OFF
OK CANCEL 48 Change Equalizer Settings To change the equalizer for normal sound, enhanced bass or treble, go to SETTINGS>SOUNDS>EQUALIZER. To change the equalizer settings:
1. Go to the SETTINGS menu. MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT 2. Go to the SOUNDS menu. 3. Choose EQUALIZER. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES EXIT OK SOUNDS INTERCOM RINGER KEY TONE HANDSET TONE EQUALIZER OK EXIT 49 4. Choose the equalizer setting for NORMAL, ENHANCED BASS or ENHANCED TREBLE and press OK. EQUALIZER NORMAL ENHANCED BASS ENHANCED TREBLE
OK CANCEL Change Time and Date Settings Time and date settings are configured in a separate menu accessed through the handset settings menu. Date and time are displayed on the bottom of the desktop. To configure date and time or the format for display of time and date for the handset go to SETTINGS>DATE AND TIME and choose the function you want to change. Change Current Time Setting To configure the time that is displayed on the bottom of the desktop on the handset LCD screen:
1. From the SETTINGS menu, select DATE AND TIME and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK EXIT 50 3. Configure the HOUR and MINUTE with the right and left arrows of the navigation button. Press the right arrow to increase the number displayed by 1 for each press, press the left arrow key to decrease the number. Use the up and down arrow keys to select HOUR or MINUTE for configuration. DATE AND TIME DATE FORMAT DATE TIME FORMAT TIME OK EXIT TIME HOUR 04 MINUTE <43>
OK CANCEL 2. Select TIME and press OK. 51 Change Date Setting To configure the date that is displayed on the bottom of the desktop:
1. From the SETTINGS menu, select DATE AND TIME and press OK. 2. Select DATE and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK DATE AND TIME DATE FORMAT DATE TIME FORMAT TIME OK EXIT EXIT MONTH MONTH <10>
DAY <13>
YEAR <07>
OK 3. Configure the MONTH, DAY and YEAR with the right and left arrows of the navigation button. Press the right arrow to increase the number displayed by 1 for each press, press the left arrow key to decrease the number. Use the up and down arrow keys to select MONTH, DAY or YEAR for configuration. Change Time Format Display CANCEL 52 To configure the time format used for the LCD display:
1. From the SETTINGS menu, select DATE AND TIME and press OK. 2. Select TIME FORMAT and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK DATE AND TIME DATE FORMAT DATE TIME FORMAT TIME OK EXIT EXIT TIME FORMAT 12-HOUR 24-HOUR
3. There are two date formats to choose from, a 12-HOUR will display time in the form HOUR:MINUTE plus A or P to indicate AM or PM, for example ) 01:09P is nine minutes after one oclock in the afternoon. The 24-HOUR option uses a 24 hour clock, so nine minutes after one oclock in the afternoon would look like 13:09 without any separate character to indicate AM or PM. OK CANCEL 53 Change Date Format For example, to configure the time that is displayed on the bottom of the desktop:
1. From the SETTINGS menu, select DATE AND TIME and press OK. 2. Select DATE FORMAT and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK DATE AND TIME DATE FORMAT DATE TIME FORMAT TIME OK EXIT EXIT DATE FORMAT MM/DD/YY DD/MM/YY MMM/YY OK 3. Choose to display the date in numeric form in the order Month/Day/Year or Day/Month/Year. The default date format setting uses an abbreviation English name of the month (the language setting does not have an effect on this). CANCEL 54 Change Language Setting To change the language used in the LCD display, got to SETTINGS>LANGUAGE and choose form the languages offered. The default language is English. If the phone is reset, the language settings are also reset to English. The languages supported on the handset are: English, French, German, Italian, Spanish, Portuguese, Swedish, Danish, Norwegian and Finnish. 1. Choose LANGUAGE in the SETTINGS menu and click OK. 2. Scroll to select the language from the list and click OK to immediately begin using the chosen language. EXIT 3. A setting SAVED message appears briefly before returning to the language selection menu. OK SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK EXIT LANGUAGE FRANAIS DEUTSCH ITALIANO ESPAOL SALVATO OK 55 Change Call Service Settings The phone supports Auto Answer to save an additional step when picking up the handset from the base station cradle to answer a call. When Auto Answer is enabled and the handset is resting in the base station cradle or recharging the battery, to answer an incoming call it is only necessary to pick up the handset. It is not necessary to press the Call button in this circumstance. Likewise when this is enabled, a call is ended by returning it to the base stations cradle. To enable Auto Answer:
1. Choose the CALL SERVICES option in the SETTINGS menu and press OK. SETTINGS SOUNDS DATE AND TIME LANGUAGE CALL SERVICES OK EXIT 2. Select AUTO ANSWER and press OK. 3. Select ON and press OK to activate Auto Answer. CALL SERVICES AUTO ANSWER
OK EXIT AUTO ANSWER ON OFF
OK CANCEL 56 Change Contrast Setting To change the contrast of the LCD display go to SETTINGS>CONTRAST, select the level of contrast and press OK, the display will use the selected contrast level so you will immediately see how it will appear. CONTRAST CONTRAST 1 CONTRAST 2 CONTRAST 3 CONTRAST 4 OK CANCEL CONTRAST CONTRAST 3 CONTRAST 4 CONTRAST 5
OK CANCEL 57 Handset Extras The Extras menu access from the Main Menu includes alarm clock, timer and stopwatch functions. Alarm Clock To use the alarm clock function:
1. Choose the ALARM CLOCK option and press OK. 2. Turn the alarm ON, and click OK to enter the time you want the alarm to sound. EXTRAS ALARM CLOCK TIMER STOPWATCH
OK EXIT ALARM CLOCK ON OFF
OK EXIT 58 3. Configure the HOUR and MINUTE for the alarm with the right and left arrows of the navigation button. Press the right arrow to increase the number displayed by 1 for each press, press the left arrow key to decrease the number. Use the up and down arrow keys to select HOUR or MINUTE for configuration. Timer To use the alarm timer:
1. Choose the TIMER option and press OK. ALARM CLOCK HOUR 00 MINUTE <00>
CANCEL OK EXTRAS ALARM CLOCK TIMER STOPWATCH
EXIT OK TIMER HOUR 00 MINUTE <00>
SECOND 00
CANCEL OK 2. Configure the HOUR, MINUTE and SECOND for the alarm with the right and left arrows of the navigation button. Press the right arrow to increase the number displayed by 1 for each press, press the left arrow key to decrease the number. Use the up and down arrow keys to select HOUR or MINUTE for configuration. 59 Base Station Settings The Base Setup menu is used when there are more than one handset used or when there is more than one base station used. This is also where the base station can be reset to the factory default settings. Adding New Handsets If you are planning to use multiple handsets for a single base station, it will be necessary to register the added handset in order to be recognized by the base station. This process involves first activating the registration process from the base station, then configuring the new handset being added and requires a negotiation process to be initiated from the base station with which the added handset will associate. Activate the Base Station When you are ready to add a handset, press and hold the Intercom button on the front of the base station for 5 seconds. You should see the LED indicators of the front of the base station blink, alternating between the green and amber LEDs. Press Intercom button 60 Now use the handset being added to do the following:
1. Press the Left Soft Key to use the Menu option at the bottom of the desktop. 01/01 Menu 00:02 Names 2. Now you can navigate through the MAIN MENU options by pressing the arrows of the navigation key. MAIN MENU SYSTEM CALL LOGS SETTINGS EXTRAS OK EXIT 3. Use the navigation key to scroll down to the BASE SETUP option. Press the Left Soft Key to view the BASE SETUP menu. MAIN MENU CALL LOGS SETTINGS EXTRAS BASE SETUP OK EXIT 61 4. In the BASE SETUP menu, press the Left Soft Key to select the REGISTER option. BASE SETUP REGISTER b SELECT BASE DELETE HANDSET RESET OK EXIT 5. In the REGISTER menu, press the Left Soft Key to select the BASE from the list. The base that has just been activated will appear marked by an asterisk (*) in the list. REGISTER BASE 1
BASE 2 BASE 3 BASE 4 OK CANCEL 6. You must now enter the PIN number for the handset to establish the DECT connection. Use the number keypad to enter the PIN number. The factory default PIN number is 0000. REGISTER ENTER PIN:
OK CANCEL 62 REGISTER ENTER PIN:
OK DELETE 7. Once the PIN has been keyed in, press the Left Soft Key to select the OK option. The handset will initiate a search for the base station and a negotiation process will take a few seconds until the DECT connection is established. SEARCHING 8. The antenna icon in the upper left corner of the display will blink on and off during the DECT connection negotiation process. SEARCHING 00:04 01/01 63 9. When the DECT connection is established, the channel number used for communication between the base station and the handset appears under the battery icon near the upper left corner of the display. Finally when D-Life appears in the center of the display, the phone is ready to use. Menu Names D-Life 1 00:05 Names 01/01 Menu Change Base Station The procedure to change which base station a handset will associate with is very similar to the procedure to add a new handset to a base station association group. First press the Intercom button on the front of the base station for 5 seconds until the LEDs flash on and off in an alternating pattern. 1. To use another base station in an environment where more than one DHA-130 are being used, go to the BASE SETUP menu, choose SELECT BASE and press OK. BASE SETUP REGISTER SELECT BASE DELETE HANDSET RESET OK EXIT 64 2. Choose a base from the list, the asterisk (*) indicates the base station currently broadcasting the registration request. Press OK to go the register handset menu where you will need to enter the PIN. SELECT BASE BASE 1 BASE 2 BASE 3
BASE 4 OK EXIT 3. You must now enter the PIN number for the base station to establish the DECT connection. Use the number keypad to enter the PIN number. The factory default PIN number is 0000. REGISTER ENTER PIN:
OK CANCEL REGISTER ENTER PIN:
OK DELETE 65 Delete Handset 1. To discontinue the DECT service connection to an individual handset, go to the BASE SETUP menu, choose DELETE HANDSET and press OK. BASE SETUP REGISTER SELECT BASE DELETE HANDSET RESET 2. Choose a handset from the list, and press OK to go the menu where you will need to enter the PIN of the base station to remove the handset from service. OK EXIT SELECT BASE BASE 1 BASE 2 BASE 3 *
BASE 4 OK EXIT 66 Reset Base Station 1. To reset the base station to its factory default settings including language and network IP settings, use the RESET option in the BASE SETUP menu. BASE SETUP REGISTER SELECT BASE DELETE HANDSET RESET OK EXIT 2. Entering the correct PIN number is required to reset the base station. Enter the PIN number and press OK. RESET BASE ENTER PIN:
OK DELETE 3. A correct PIN number entry will bring up a CONFIRM? prompt. The factory default PIN number is 0000. Choose Yes to reset the base station to factory default settings. 67 Change PIN The PIN number used for the base station can be changed if desired. This is done through the BASE SETUP menu. 1. To change the PIN number for the handset in use, select the CHANGE PIN option in the BASE SETUP menu and press OK. BASE SETUP SELECT BASE DELETE HANDSET RESET CHANGE PIN OK EXIT 2. Entering the current PIN number is required in order change it to a new number. Enter the current PIN number for the handset in use and press OK. The factory default PIN is 0000. CHANGE PIN ENTER PIN:
OK DELETE 3. Enter the new PIN number for the handset in use and press OK. CHANGE PIN ENTER NEW PIN:
4. A CONFIRM? prompt appears. Choose Yes to use the new PIN number. OK DELETE 68 Using the Web Utility The DHA-130 web configuration utility can be used for limited configuration of the DHA-130. Since the Phone is configured automatically by D-Life, there is not much to configure. The VoIP settings cannot be configured through the web configuration utility. Type the IP address assigned to the DHA-130 by your Router or use the static IP addressed assigned in the form http://xxx.xxx.xxx.xxx Type the Password used to log in to the web manager. The factory default User Name is admin and cannot be changed, the default Password is admin and click on Log In. 69 Internet Connection and Time Configuration To configure a fixed IP address for the DHA-130; or if the Phone is connected directly to a broadband modem, the Internet settings can be configured in the Setup menu page. To view the Setup menu, click on the Setup link to view the menu pictured below, choose the network connection option from the My Internet Connection is: pull-down menu, configure the settings and click on the Save Settings button. The Setup menu is also used to configure the system time for the Phone. Dynamic IP Address (DHCP) The Dynamic IP Address (DHCP) option can be used if you are using automatic IP address assignment for IP devices on your network. This can be used for a local DHCP server on the LAN, or for DHCP service from your ISP or network services provider. The Phone becomes a DHCP client using this configuration and it is the factory default setting. To configure Dynamic IP address (DHCP) for the network connection, select the Dynamic IP (DHCP) option from the My Internet Connection is: pull-down menu in the Setup page menu. 70 Static IP Address The Phone is configured to use automatically assigned IP settings by default. However a fixed IP address can be assigned to the Phone if desired. Static IP address can also be used if the Phone is connected directly to a broadband modem and the ISP has assigned and Static IP address Internet connection. To use Static IP address network setting, select the Static IP option from the My Internet Connection is: pull-down menu and configure IP settings suitable for your LAN. Click the Save Settings button to apply the new IP settings. Notice that it will be necessary to use the newly configured IP address to again access the web manager. After applying the settings, type the new IP address into the browser address bar and press the Enter key to regain management access. PPPoE If you are using a cable or DSL modem without a router to provide the Internet connection settings, you might need to configure PPPoE settings to connect to the 71 Internet. If you have been given a user name and password to use for your Internet connection and you are NOT using a router (broadband or DSL router) configured to make the PPPoE connection, the Phone can be configured as a PPPoE client. To configure the PhoneCorder as a PPPoE client, choose the PPPoE option from the My Internet Connection is: pull-down menu, type in the User Name and Password used for authentication, and if desired or required, provide a Service Name and AC Name. The Idle Timeout is the time in minutes the PhoneCorder is allowed to remain idle (i.e. no data received or transmitted) before the PPPoE session is ended. Use this option if your ISP charges for Internet access based on the amount of time spent connected. If you have unlimited Internet use, leave this blank to keep the PPPoE connection on at all times. Maintenance Use the Maintenance menu page to change the password used to access the Phones web utility and to upgrade the firmware. 72 Administration Password Setting To create a new password, type the Old Password, type the new password in the New Password field and then confirm the change in the Retype Password field. The Username (admin) used to access the Routers management software cannot be changed by the user. Firmware Upgrade To upgrade firmware, type in the name and path of the file or click on the Browse button to search for the file. Click the Upload button to begin copying the file. The file will load and restart the Phone automatically. Status To view the current status and key settings configured on the PhoneCorder, click the Status link. 73 The Status information includes IP settings and connection status of the Phone. This information is useful for troubleshooting. 74 Technical Specifications Ethernet Port Standard Compliance Rate Adaptation Cordless Phone Interface Standard Compliance Frequency RF Channels Modulation Voice Coding Voice Port Telephone dialing mode support Ringer Equivalency Number Tone Detection Line Impedance
RJ-45, Auto MDI/MDI-X, 10/100 Mbps
IEEE 802.3 for 10 Mbps Ethernet
IEEE 802.3u for 100 Mbps Ethernet
10/100 Mbps, Auto-Negotiation
DECT (Digital Europe Cordless Telecommunication)
GAP (Generic Access Profile)
1880-1900 MHz
10 Channels
GFSK
ADPCM< 32K bit/s t.
One RJ-11 POTS port for PSTN Life Line
DTMF
Dial Pulse (20pps/10pps)
REN=5
DTMF
Modem/Fax: V.21, V.25
600ohm Appendix A 75 Chassis Material Width Depth Height Weight Power Battery Telephony Call Control Protocol CODEC Echo Cancellation
ABS+PC
AC Power Adapter
Output: AC12V, 1.2A
Metal Hydride Cylindrical Cell
Size AAA
SIP (RFC3261)
G.711 (A-law and U-law)
G.726
G.729A
iLBC
G.168 76 Management DHCP (Dynamic Host Configuration Protocol) Configuration Restore/Backup TELNET TFTP Client Security SIP Authentication VoIP NAT Traversal Safety/EMI Requirements:
EMI Certification Environmental Operating Temperature Storage Temperature Operating Humidity Range
DHCP Client (RFC2131)
For firmware upgrade and configuration file download
Username/Password control for TELNET and WEB configuration
SIP Authentication with MD5 password encryption
SIP/STUN
UL/CUL
FCC Class B
BSMI Class B
CE Class B 0 to 40C
-10 to 55C 5 to 95%, Non-condensing 77 Router Port Configuration Appendix B Most D-Link routers such as the [insert D-Link DSL and broadband router product numbers here] support a feature that allows easy one-click configuration of the DHA-130. So if you are using a D-Link router, chances are you will not need to manually configure the ports. If a one-click VoIP configuration is not supported on your router, check to make sure it is using the latest firmware. Upgrading your router to the latest firmware might be necessary to support this feature. If you have other routers or you are having difficulty with the DHA-130, read the information on the next below to learn how to open ports on routers. A D-Link router is used for the examples to illustrate how the port forwarding menus are used, but the example is typical of many small office routers. Opening Ports on Routers and Gateways The firewall security features built into most routers and gateways might prevent users from accessing the VoIP features of their DHA-130. A router connects to the Internet through a series of numbered ports. The ports used by the DHA-130 are often blocked from access over the Internet by the firewall features of the router. You may be able to connect to another VoIP telephone but not receive any audio. This is a typical scenario of a firewall blocking the ports needed by the DHA-130 to send audio. If this is the case, you need to open the ports on your router to the Internet to allow access to the DHA-130. The port numbers used by the DHA-130 are:
The router or gateway that you are using may be different from the D-Link DI-614+ wireless router example shown on the following pages. However, the general procedure for opening ports will be similar. (If you do not have a D-Link router, look for Virtual Server, Firewall Rules, Port Forwarding, Advanced or Firewall in your routers configuration utility.) 3478 5060 8080 9090 78 In the example that follows we begin by opening the DI-614+ Web configuration utility and going to Advanced > Virtual Server. Follow the steps on the following pages to open the ports on your router for successful operation of the DHA-130. How to Manually Open Ports on a Router A total of 7 ports must be opened for the DHA-130 to work with most routers or firewalls. To open these ports, please do the following:
A. Click Enabled B. Give the Virtual Server a Name (such as i2eye) C. Under Private IP, enter the IP address obtained from the DHA-130
(How to obtain an IP address from the DHA-130: Turn the DHA-130 on. Highlight the Settings button on the Main Screen. Navigate to Settings>Network>Network Address >IP address) D. Under Protocol Type, choose Both (TCP and UDP) E. Under Private Port and Public Port, enter 3478 F. Under Schedule, click Always G. Click Apply to save this entry You have now completed the entering of one port to be opened. You will need to open six more ports. Repeat steps A through G five more times for each one of the following five ports:
5060, 8080, and 9090. You have now completed the opening of the 4 ports. Your DHA-130 is ready to use with your router or gateway!
(Important: Not all routers and gateways are the same. Please refer to your user products manual for specific instructions on opening ports). 79 Appendix C Troubleshooting 1. The DHA-130 will not make a call using a phone number Check that you did not misdial the number. The Phone is not connected to the Internet. The Phone is not registered with the D-Life. It may take the Phone up to 10 minutes to register. Verify all network settings, including DNS. Far side of the call is not registered with a D-Life or compatible VoIP Directory Service. 2. The DHA-130 cant make direct IP calls Phone is not connected to the Internet. Check to make sure the broadband connection is functioning. The person you are trying to call is unreachable. Ensure the IP address of the person you are trying to call is correct. 3. The DHA-130 or television produces an off-hook signal The telephone is off the hook. Hang up the phone. 4. The DHA-130 or television produces a fast busy signal Person you are trying to call is not registered with the directory service. Call the person using direct IP or wait until the person is registered with the directory service. Person you are trying to call is in a call or has rejected your call. Try your call at a later time. 5. DHA-130 doesnt ring with an incoming call Telephone cable is not properly plugged in to wall or DHA-130. Verify that the cable is connected properly. 6. Phone freezes-up while answering a call Phone is not functioning properly behind a firewall. See Appendix B for troubleshooting multiple port connections. 80 LCD Display Icons Appendix D Icon Name Antenna Line 1 Line 2 New missed call Repeated missed call Line 1 on Hold Line 2 on Hold Line 1 indicator Line 2 indicator Line 1 ringer off Line 2 ringer off Line 1 & 2 ringers off Speaker Intercom indicator Battery New message Alarm Keypad lock Arrow icons Volume Melody Number Mode/status Prefix FUNCTION Linked to base (steady) or lost link (blinking) Line 1 is off hook (Steady) Incoming call from Line 1 (Blinking) Line 2 is off hook (Steady) Incoming call from Line 2 (Blinking) New missed call CID Repeated missed call CID Line 1 on hold Line 2 on hold Line 1 indicator during phone mode Line 2 indicator during phone mode Line 1 ringer off Icon Line 2 ringer off icon Lines 1 & 2 ringers off icon Hands free speaker is turn on Intercom call indication in conference mode 3-block level indication, animated when charging, empty when battery is low New message indication (VMWI is on, new missed call) Alarm clock icon Keypad lock icon Arrow icons (left and right arrow) Volume icon Melody icon Number icon Mode/status icon (used in call barring, etc) Prefix icon 81
| 1 | USERS MANUAL 2 | Users Manual | 1.76 MiB | February 04 2008 / March 04 2008 |
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Links reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. WWhat Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Links judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the opeoperating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, rmware or other products or services provided by anyone other than D*Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Oce will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. LimitLimitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D*LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELRELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specic legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. CCopyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior notice. Copyright 2008 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FFCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipequipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure: SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera-
tion. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IC Statement:
This Class (B) digital apparatus complies with Canada ICES-003 Cet appareil numrique de la class (B) est conforme la norme NMB-003 du Canada Complies with IC: ICES - 006 en conformit avec IC: NMB - 006 RSS-213 Statement :
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. PPrivacy of communications may not be ensured when using this telephone. This unit to be used with the power supply provided by manufacturer. For detailed warranty outside the United States, please contact corresponding local D-Link oce. Register your product online at http://www.d-life.com
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2008-04-03 | 1921.536 ~ 1928.448 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2008-04-03
|
||||
| 1 | Applicant's complete, legal business name |
Ascalade Technologies, Inc.
|
||||
| 1 | FCC Registration Number (FRN) |
0004319729
|
||||
| 1 | Physical Address |
12051 Riverside Way
|
||||
| 1 |
Richmond, BC, N/A V6W 1K7
|
|||||
| 1 |
Canada
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
| 1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
PBW
|
||||
| 1 | Equipment Product Code |
DT19R35H
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J******** T****
|
||||
| 1 | Title |
Senior Engineering Manager
|
||||
| 1 | Telephone Number |
604-2********
|
||||
| 1 | Fax Number |
604-2********
|
||||
| 1 |
J******@ascalade.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | PUE - Part 15 Unlicensed PCS portable Tx held to ear | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | US DECT HANDSET UNIT | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
| 1 | Grant Comments | Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Head: 0.02 W/kg; Body: 0.01W/kg | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Electronics Testing Center, Taiwan
|
||||
| 1 | Name |
W******** T******
|
||||
| 1 | Telephone Number |
886-3********
|
||||
| 1 | Fax Number |
886-3********
|
||||
| 1 |
w******@etc.org.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0880000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC