FCC ID: 2A3BX-ASIVIO True Wireless Earbuds

SHENZHEN KMODA PLASTIC HARDWARE CO., LTD Product Specifications Product nameTrue Wireless Earbuds Model No Asivio One Sector Engineering Departments Date October 14,2021 FCC ID:2A3BX-ASIVIO Product Specifications 1. Scope of Application 2. Appearance Size 3. Product Structure Diagram 4. Basic Product Parameters 5. Product Features and Operating 1. Scope of Application v5.0 2. Appearance Size 2. Product Structure Diagram 3. Basic product parameters BT5.0 QCC3040 Earphone battery Type: Polymer battery Paring nameAsivio One Version:

chip Model: HFP , HSP , AVRCP , A2DP Signal to noise ratio:93dB A Constant power 3mW charging base battery capacity: 350mA Maximum power 5mW Single-ear base charging current 350mA (Max) Earphone battery capacity 35mAh Headphone charging current:35mA Charging time: 1H Static current 1.5mA Frequency response 20-20khz charging Case charging time 2-3 hours Impedance:16ohm sensi-

tivity:115dB Headset distortion THD 3.0%AT 1mW/ 100HZ-4khz Shutdown current 6 5uA Headset size :23.2*21.7*20.5mm (including ear cap) Music time is t 5-6 hours Charging case size: 59*32*25mm Talk time t 5-6 hours Headset (single) weight 3.9G Music playback current 8mA 2(host) 6mA 2(secondary) Headset current :7mA Bluetooth distance 10 M Accessories charging line: L=0.3m10mm SPK specifications: MIC specifications:

Outer diameter 6.0mm Outer diameter/height of MIC:2.75*1.85*0.95M High 4.90.3mm resistance 200 Resistance :16 OHM15% frequency : 100Hz to 8000Hz SPK sensitivity :115dB2.5dB(at 1KHz), 1mW consumption current 80A (at: 1000Hz) SPK Rated power :3mW sensitivity -423dB (0dB=1V/ Pa) SPK maximum power: 5mW SNR 57dB Frequency range: 20HZ-20khz (at: 0.22V / 20HZ-3khz) operating voltage 1.6-3.6V Distortion rate 3% (at: 1mW/ 100HZ-5khz) Measurement Circuit:

4.Product Features and operating 5.1 Product description This product is a true wireless stereo Bluetooth headset, Bluetooth version V5.0. 5.2 Product functions and operating instructions:

Function Current status Operation method LED indication Prompt tone Turn on/off Turn on Turn off the headset opens the charging box and takes it out, automatically turns on, then automatically performs TWS pairing, and then connects back to the last connected mobile phone Long press the headset for 3s to turn on the white light always on 1S tone equipment. (Clear the paired earphones and the distance between the two earphones cannot exceed 1M) Turn off Turn on the headset will automatically turn off if the battery of the headset is exhausted or the standby timeout expires Put the headset in the charging box, close the lid, turn off the Bluetooth of the headset, and enter the charging state After the headset is fully charged, the headset will automatically shut down

(Main or Sub) Headphone long press for 5s, the main and sub headphones will be turned off synchronously, the white light is always on, 1S tone tone Music mode Play/pause Music mode Double tap left or right ear NA NA Last song R long press and touch about 2S NA Tone tone Next song L long press and touch about 2S NA Tone tone Volume + 1 tap on the right ear NA Tone sound Volume-1 tap on the left ear NA Tone tone Call mode Answer incoming call Incoming call Tap the left or right ear twice Hang up the call During a call, tap the left or right ear tone twice Incoming call rejected Incoming call Long press 2S left or right ear Tone tone TWS pairing L and R pairing TWS back-connection system defaults to keep the last connection data with the mo-

bile phone, normal power-on defaults to give priority to the last connected device, if the connection is not success-

ful after 10 seconds, it will automatically enter the pairing mode, within 5 minutes If the pairing is not successful, it will automatically shut down, and the voice will prompt Tone tone. The mobile phones were successfully paired with Apple, Samsung, and Huawei, and the link was not broken after repeated tests for 300 times. NA TWS pairing When the headset is in the charging box, take out the headset, and the headset will automatically NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency ener-

gy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired opera-

tion.

FCC ID Label Location The product does not have enough space to place the label, and FCC ID label is reflected in the user manual and package, as below:

Asivio Group LLC Agent Authorization Company: Asivio Group LLC Address: 4630 South Kirkman Rd.Suite 447Orlando FL 32811 Product Name: True Wireless Earbuds Model Number(s): Asivio One, Asivio Buzz Product Description: True Wireless Earbuds We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021-10-26 Name:

Sam Francis Company: Asivio Group LLC

Asivio Group LLC Oct. 26, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2A3BX-ASIVIO Model Number: Asivio One, Asivio Buzz To Whom It May Concern:

We, The Asivio Group LLC hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature:

Asivio Group LLC Contact person: Sam Francis

Asivio Group LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-10-22 Subject; Request for Confidentiality FCC ID: 2A3BX-ASIVIO To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram X] Block Diagram

[_] Parts List

[X] Operational Description

[_] Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[_] External Photos

[_] Test Setup Photos

[_] Internal Photos

[_] User Manual

[| For 45 days, pursuant to Public Notice DA 04-1705. OR

[] For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Rand MAGA Asivio Group LLC Contact person: Sam Francis