FCC ID: H8NNDQ1300-1 5G USB Dongle

Product Overview Insert SIM card Lets get Started Quick Start Guide Type C Cable LED Area 5G Sub6 USB Dongle Askey NDQ1300 SA SIM Card Door SIM Card Label Model Name NDQ1300-SA Frequency Band N48,N77/n78 for US and EUR,n79 for Japan 1 2 Dimension 77.5x77.5x16.5mm Weight Color TBD White Operation Voltage 5V maximum output power 10W Manufactory Askey Accessory Type C USB LED Y-Cable (Optional) 3.1 with Water Proof of IP65 Power and Signal LED This Askey 5G mobile device supports Sub 6GHz for 5G NR SA mode network.It oers the exibility with combining 5G NR mobile broadband access. It provides the much higher download speed for users to enjoy an exciting experience on the wireless applications. Open the back cover Push the SIM card cover to the left 3 4 Flip the SIM card cover Put the SIM card and Push the SIM card cover to the right 1 2 3 Insert the Dongle into the Host by USB and waiting device boot up Open browser and browse http://my.usb or http://Subnet_IP The default user name and password are admin LED Indicators Certs INDICATOR DESCRIPTION RAT Status

(led#1) Data Status

(led#2) System Connection Data Activity System Booting System Error 5G SA Connected SIM Not Ready Home Network Roaming Network Firmware Status Upgrading CE compliance statement FCC SAR statement This equipment complies with Directive 2014/53/EU radiation exposure limits set This equipment has been tested and found to comply with the limits for a Class B This equipment complies with FCC radiation exposure limits set forth for an forth for an uncontrolled environment. End user must follow the specic operating digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to uncontrolled environment. End user must follow the specic operating instructions instructions for satisfying RF exposure compliance. This transmitter must not be provide reasonable protection against harmful interference in a residential for satisfying RF exposure compliance. This transmitter must not be co-located or co-located or operating in conjunction with any other antenna or transmitter. installation. This equipment generates, uses and can radiate radio frequency operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio energy and, if not installed and used in accordance with the instructions, may cause The portable device is designed to meet the requirements for exposure to radio waves established by European Union market (France). These requirements set a harmful interference to radio communications. However, there is no guarantee waves established by the Federal Communications Commission (USA). SAR limit of 2W/kg averaged over ten grams of tissue. The highest SAR value that interference will not occur in a particular installation. XXW/kg reported under this standard during product certication for use when properly worn on the body. (Recommended use distance 5mm) FCC compliance statement If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certication for use when properly worn on the body (Recommended use distance 5mm). Yellow Blinking Red Solid Purple Solid This device complies with Part 15 of the FCC Rules. Operation is subject to the measures:

following two conditions: (1) this device may not cause harmful interference,

-- Reorient or relocate the receiving antenna. Red Blinking Green Blinking Blue Blinking and (2) this device must accept any interference received, including interference

-- Increase the separation between the equipment and receiver. Red/Blue Blinking back and forth that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

2 ASHEY Model: NDQ1300-SA SN: ABCDE000001 IMEI: XXXXXXXXXXXXX1X FCC ID: H3NNDQ1300-1 HCE Made in China Front Side Back Side

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Askey Computer Corp. Address Grantee Code FCC ID 10F, No. 119, JIANKANG RD. ZHONGHE DIST. NEW TAIPEI CITY 23585 TAIWAN H8N H8NNDQ1300-1 Authorized Contact Name Jack Po Contact Email Contact Phone jackpo@askey.com 886 2 2228-7588 ext. 18734 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[Askey Computer Corp.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Askey Computer Corp.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date:2023-07-25 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Jack Po Manager QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

Askey Computer Corporation 10F, No. 119, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: H8NNDQ1300-1 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Jack Po Signature:

Title: Manager On behalf of Company: Askey Computer Corporation Telephone: 886 2 2228-7588 ext. 18734 E-mail: jackpo@askey.com

Askey Computer Corporation 10F, No. 119, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan Date: 2023-07-25 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: H8NNDQ1300-1 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS-

CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Askey Computer Corp. This authorization is valid until further written notice from the applicant. Print Name: Jack Po Signature:

Title: Manager On behalf of Company: Askey Computer Corp. Telephone: 886 2 2228-7588 ext. 18734 E-mail: jackpo@askey.com

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-7-25 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Askey Computer Corp. Company Name: Askey International Corp. Grantee Code: H8N FRN: 0033593484 Contact Name: Jack Po Contact Name: John Chen Address: 10F, No. 119, Jiankang Rd., Address: 4017 Clipper Court, Zhonghe Dist., New Taipei Fremont CA 94538 City, Taiwan City/Province/Zip: Taiwan/23585 City/Province/Zip: CA/94538 Telephone: 886 2 2228-7588 ext. 18734 Telephone: (510) 415-2767 Fax: 886 2 3234-9340 Fax:

Email: jackpo@askey.com Email: john6_chen@askey.com Applicable Equipment: FCC ID: HENNDQ1300-1 ATTN: Director of Certification:

We, Askey Computer Corp. and Askey International Corp. understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Askey Computer Corp. and Askey International Corp. acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Jack Po Name (Printed): John Chen Title: Manager Title: Director . Signature: GR Signature: / (Loe