JL-8.3-13 BLE remote control product specification
() Client unit Customer Material Num. WeiDa Material NO. 04AD-00DUN00 WH-6255_BLE
++IR Product Type Day period 2020-07-14 Nick Proposed Batch registration Party to the contractor: Wuxi Weida Intelligent Electronics Co.,Ltd. 789 A 2-3 Address : Liangxi District, Wuxi, Jiangsu Province, South Lake Avenue 789 No.A building 2-3 building (sensor high-end manufacturing base) 0510-85421878 0510-85388557 TEL : 0510-85421878 FAX : 0510-85388557 http://www.cnwddz.com MAIL : http://www.cnwddz.com 2 JL-8.3-13 Change of specification book resume Date Version Modify Chapter Describe Proposed Note 2020-07-14 2020-07-21 2020-07-21 V1.0 V2.0 V2.1 2020-07-24 V2.2 SSU Nick Nick Nick Nick 2020-08-13 V2.2 SSU Nick 2020-08-17 V2.1 SW 2020-08-20 V2.2 Nick 2020-10-09 V2.3 Nick Model 080060030601000006151055200815 Version V006 Date 20-08-15 Proposed SW HW WH-6308_BLE V1.0 20-08-13 Nick 3 JL-8.3-13
............................................................................................................................................................... 5 Remote Control test conditions and parameters ............................................................................................................... 5
.......................................................................................................................................................................13 Effect picture of remote controller product ..................................................................................................................13
....................................................................................................................................................................................14 Remote control key value..............................................................................................................................................................14
..................................................................................................................................................................15 Remote Control key action Description ................................................................................................................................15
.......................................................................................................................................................................22 Schematic diagram of remote controller design .............................................................................................................22 PCB ......................................................................................................................................................................23 Remote control PCB design ...........................................................................................................................................................23
.......................................................................................................................................................................24 Remote control pot picture file .............................................................................................................................................24
................................................................................................................................................................................25 Remote detonation map ....................................................................................................................................................................25
.......................................................................................................................................................................26 Schematic diagram of remote control package ..................................................................................................................26
...........................................................................................................................................................................24 Refer to keystroke load distribution map ......................................................................................................................................24 4 JL-8.3-13 Remote Control test conditions and parameters 1 Hardware requirements NO. Description Project 1 Number of keys Technical Specifications Note 15 15Keys 2 150*39*19mm 3 2mm 4 0.15mm Remote control size Button Free Height The height after the key action 5 Key force Refer to keystroke load distribution map 6 ABS Shell Plastic Material 2.0mm ABS raw material (tasteless, no blending), thickness 2.0mm 7 8 Shell Color Solid color injection black, Screen printing Acid-resistant and alcohol-
resistant 5 JL-8.3-13 9 PCB 10 PCB 0.3mm PCB Circuit board Material PCB Cabling line width and spacing 11 Surface Coating See the remote control appearance Treatment and process requirements in detail Surface should be flat and firm, not allowed to have scratches, spot defects, flow hanging, peeling and breakage 12 Board Production All printed circuit boards shall be requirements corrosion resistant 13 Key requirements No flying lines are allowed Solder joints full, no virtual welding, off welding, Lianxi 6 JL-8.3-13 Key adhesive edge structure should be added "waterproof wall", in order to achieve the key assembly, the finger buckle can not be out of the plastic shell button hole, key surface positioning through the hole using silicone rubber bag plastic design, so that the entire silicone button surface has no holes to ensure that the use of a long plate surface neat, silicone key need to be hard 14 Conductive adhesive Material Must use silicone material (no powder) and no pungent odor 15 Metal dome metal dome 50 Metal Dome(pot slices) 30 Remote control all keys to use themetal Dome button, and the life must be 5million times, continuous press test number 3 million times, can restore to the original load 2 Product Specifications NO. 1 Project Operating temperature Specification parameter 050
Note 2 95%
Relative humidity 7 JL-8.3-13 3 4 5 6 7 8 9 86106Kpa Atmospheric pressure 20050LX Ambient illumination Natural light or fluorescent MCU Shell material Sample Color Battery specification lights 200 50LX TLSR8251 ABS Reference Customer Requirements Specifications AAA 1.5*2 0.8 Free Drop test 3cm From a height of 0.8 m, the floor is free to fall in a wooden floor of not less than 3 cm in sequence, and three cycles. 10 8KV 11 60 12
-20 Electrostatic environment test High Temperature Storage test Low Temperature storage test 13 40 902%
Constant damp heat 40 Relative Humidity 90 2%
test 8 JL-8.3-13 14 Temperature Cycle Change Test 15 A AQL=0.65 Acceptance criteria Heavy defects (AClass)aql=0.65 MIL-STD-105E-
C AQL=1.5 LEVEL()AQL Light defect (C Class)aql=1.5 16 Remote control transport and storage conditions
20+60 80%
impact. In transit should avoid direct attack of rain or snow or strong The remote control should be stored at ambient temperature-
20~+60, the relative humidity is not greater than the 80%, with no strong magnetic field, corrosive substances and other harmful gases in the storehouse, the storage period is one year.After the product has n 9 JL-8.3-13 reassessed for more than one year, it can be brought into the market. 3 Product SpecificationsBLE Part No. Project Describe Note 1 Use battery Alkaline Environmental Protection Battery 2 2.2-3.6V 3 3mA 3mA standby power Link to box 5mA 5mA emission power consumption
(general key) 25mA 25mA recording feature (voice function) 4 16K 16bit Audio output Mono,16K sampling rate,16bit Precision Audio output 5 12m 12m(no shelter around) Supply voltage Current description Transmission Distance
(Bluetooth) 6 5.0 Bluetooth 5.0 protocol 10 JL-8.3-13 Bluetooth protocol
(Bluetooth) 7 BQB Signal Meet the communication transmission requirements
(Bluetooth) distance requirements, while complying with the Bluetooth BQBCertification Requirements 8 90%
85%
Voice requirements
(Bluetooth) The speech software recognition rate 90%(sentence), has the interference case:
the speech recognition rate 85%(needs to confirm and the set-top box and the software normal state) 9 200ms Connection response
(Bluetooth) 200ms, this refers to the speed at which the connection is restored, the time interval at which the test begins broadcasting to the connected 10 HOST
Other common Bluetooth device impact HSP/HFP,A2DP HOST End Adapter driver, or affect the original Bluetooth universal device support, such as Bluetooth headset /Audio (HSP/HFP,A2DP , etc.), Bluetooth keyboard, Bluetooth mouse, game handles and so on. 11 JL-8.3-13 11 No abnormal audio transmission, no obvious interference, loss of data, cutting amplitude and other phenomena 12
-423dB Sensitivity -423dB 13 58dB cannot be less than 58dB Audio Transmission Requirements Microphone Sensitivity Microphone Signal-to-
noise ratio 12 JL-8.3-13 Effect picture of remote controller product 13 JL-8.3-13 Remote control key value 14 JL-8.3-13 Remote Control key action Description 1 When the remote control is not connected to the set-top box, the infrared key value is sent; when the set-top box Bluetooth is connected, the remote control sends the Bluetooth key value;
2 1 6 Infrared State: When the remote controller is powered on, the indicator light is always on for 1 second In the unconnected state, the light flashes continuously for 6 times; In the connected state, the indicator light is off when the button is pressed. When using voice, the indicator light is always on and the indicator light is red. 3 OK Vol-
2 , Pairing function: When the "OK" and " Vol- " keys are kept down for three seconds, while the LED are blinking,Pairing broadcast packet time is 2 minutesAfter timeout, the indicator light goes out;
4 OKVol+ 3 Rest factory settings: When you press and hold the "OK" and "Vol+"
buttons at the same time for 3s, and wait for the LED to flash 3 times, it means that the remote control and factory settings are rested;
Connection interval12ms
>10m Remote control distance >10m;
15 5 JL-8.3-13 Bluetooth remote control to support the online upgrade, box on the power automatically detect the version of the remote, version less than the server push version automatically upgrade;
6 DynalinkRemote Bluetooth device Name:DynalinkRemote. 7 OK+back bug report Support for "OK"back" upload bug report feature. 8 SSU RCU SSU Function 1IR State before learning BT Power BOX sleep/wakeup BOX BT connected: BT Power button can control BOX to enter sleep/wakeup, volume and mute button can control BOX volume;
IR Power BOX sleep/wakeup BOX BT unconnected: IR Power button can control BOX to enter sleep/wakeup, volume and mute button can control BOX volume 2IR State after learning IR Power TV,BT Power wakeup BOX TV IR Power+BT Power BT connected: IR Power controls TV, BT Power button sends a key value to wakeup BOX, volume and mute button controls TV volume IR Power TVIR Power 2F BOX TV IR Power+2F+wake up BT unconnected: IR Power controls TV, IR Power also sends another infrared key 2Fto control BOX, volume and mute button controls TV volumeIR Power+2F+wake up 16 JL-8.3-13 9 TV Manual TV configuration method APK APK UI APK TV After entering the APK, the APK will automatically jump to the corresponding brand for configuration. The UI interface needs to prompt to press and hold the mute button for configuration. At this time, the APK searches the code library and configures the remote control. After the mute icon appears, release the mute button to indicate The remote control has been configured and stored TV information. 10 Remote control key lock function 30s Long press the button on the remote control for 30s, the remote control stops sending codes; raise the button and it will return to normal status;
11 other remote control requirements:
1 50 The pairing feature requires that no Bluetooth devices be scanned or not paired up (including a continuous press pairing key for a short period of time), verify that ensure no problem;
2BT 2 50 BT Long connection: The remote does not actively disconnect the Bluetooth connection, disconnect if the return timeout to enter the deep sleep mode, the Next button to wake up the connection, no return to the problem, including the box power back, remote control power back, static 2 hour back, please verify that times to ensure no problems;
17 JL-8.3-13 3 WIFI WIFI anti-jamming features require: there must be no problem with a very strong host side WiFithroughput is normal when the remote is connected;
host WiFi throughput, make sure that the 410m Performance requirements: Require support 10m, there must be no voice calls Cotton, lost and the remote control button cotton, missing code or even key problems;
5 6 Power Requirements: Remote control can be used consistently for at least 6 months or more. 6 Speech Control 1 Press the Voice key to start recording, the remote control receives the voice engine issued stop recording instructions after stop recording;
2 18S After entering speech mode, the remote control actively quits speech mode after 18S (this is mainly to save power). 3 google Voice protocol: google private protocol. 12 LEDs Status 1 Keys 6 IR keys: red light,six flashes;
2 Paring Status 250ms 250ms, 18 JL-8.3-13 120S Paring status: red light, bright 250ms, out of 250ms, BT connection successful or failed endThe discovery time was 120s. 3s Pairing successful: red light, turned on for 3s and extinguished;
500ms 500ms 3 Paring fail: red light, bright 500ms, out of 500ms, flashing 3 times;
3 Low Power Status 300ms 300ms 5 2.4V Low power Status: red light, bright 300ms, out of 300ms, flashing 5 timesLow electrical voltage of 2.4 V. 100ms 100ms 10s 2.2V Severe power shortage status: red light, on for 100ms, off for 100ms;
flashing for 10s, low power voltage 2.2VThe RCU dont working;
4 Voice Voice status: red light, always bright in the process of speech;
13 Bluetooth boot broadcast packet format 0x0D 0xFF The protocol of the RCU power is as follows 0x5D 0x04 The format of the broadcast message actually sent by the RCU is:
0x00 0x00 0x01 0xEE 0xDD 0xBB 0x03 0xFF 0xCC 0xAA 19 JL-8.3-13 0D FF 5D 00 03 00 01 05 65 B1 D6 95 51 C8 0D manufacture data FF manufacture data 5D 00 RTK 03 00 command 01 M330 01M311 02 M330 01 01 M311 M311 M330 05 65 B1 D6 95 51 C8 TV 0D FF 5D 00 03 00 01 05 65 B1 D6 95 51 C8 0D is the total length of the manufacturing data field FF stands for manufacturing data, the fields behind it are the real content, and these contents are divided into fixed parts and changed parts. The fixed part is carried by all remote controllers' on-off radio. The variable part may be different in each remote control broadcast. 5D 00 indicates the manufacturer, RTK is a fixed part. 03 00 indicates that the command of the switch is a fixed part. 01 indicates the batch of the remote control, which is a fixed part. For example, the remote control batch of Huawei M330 box remote control is 01, and the remote control batch of M311 box remote control is 02, then for M330 box, it only needs to match the broadcast message of 01 remote control, so 01 is Fixed part. If the M311 box wants to be compatible with the remote controls of the M311 and M330 boxes, the remote control batch cannot be used as a filtering condition. 05 represents the number of key presses. The value is incremented each time the key is pressed to prevent a key press from responding 20 JL-8.3-13 multiple times and is a variable part. 65 B1 D6 95 51 C8 represents the Bluetooth address of the TV connected to the remote control and is a variable part. 21 JL-8.3-13 Schematic diagram of remote controller design 22 JL-8.3-13 PCB Remote control PCB design 23 JL-8.3-13 Remote control pot picture file 24 JL-8.3-13 Remote detonation map 25 JL-8.3-13 Schematic diagram of remote control package 26 JL-8.3-13 Refer to keystroke load distribution map 27 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction. These devices comply with part 15 of the FCC rules, as well as the Canadian Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:: (1) the device should not cause harmful interference; and (2) the device must accept any interference received. Including interference that may cause poor operation Ce matriel est conforme la partie 15 des rgles FCC [et aux critres d 'exemption des licences industrielles canadiennes (RSS)].L 'opration doit satisfaire aux deux conditions suivantes: 1) l'
quipement ne doit pas causer d 'interfrences nuisibles; et 2) l' quipement doit accepter toute interfrence reue, y compris toute interfrence pouvant conduire des oprations indsirables