FCC ID: 2A6AP-ASPA-400 Air Purifier

Manual of ASPA-400 Air Purifier Please read this manual carefully before use and keep it for reference in the future. Thank you very much for your choice. Company NameASPEN APPLIANCEINC Website www.theaspen.com AddressXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Table of Contents Packing List Technical Specifications Safety Precautions Product Components Operating Instructions Product Features Instructions for use Cleaning and Maintenance FAQ & Solutions Warranty 1 1 2 3 4 5 8 9 6-7 10 Safety Precautions The following safety precautions and instructions must be read carefully and observed when the product is used!

The behaviors with this sign must be prohibited, otherwise it may cause product damage or endanger the users personal safety. The behaviors with this sign must be operated in strict accordance with the requirements, otherwise it may cause product damage or endanger the users personal safety. The behaviors with this sign must be paid attention to, otherwise it may cause product damage or other losses due to improper operation. Prohibitory sign Warning sign Attention sign Please do not touch the power plug with wet hands. Please do not block the air inlet/outlet. Please do not use the machine in any place with much oil fume or high humidity. Please regularly clean the machine and power plug. Only the 120V power sockets are 120V power sockets. Please do not put it close to or on any heat source (such as a fireplace, stove or a place with flammable gases). Please do not rinse the high-efficiency composite filter with water. Please be careful when cleaning the air purifier, as corrosive detergents may damage the surface. This machine shall not be used by people with disabilities, perceptual disturbance or dysgnosia or children alone, unless they use it under the supervision and guidance of safety director on the site. Please do not unplug the power cord from the power socket when cleaning the air purifier or leaving it unused. Otherwise, it may cause electric shock due to poor insulation or fire due to short circuit. Packing List Packing List ASPA-400 host Composite filter Power cord Manual 1 piece (installed into the machine) 1 set 1 piece 1 piece Technical Specifications Product specifications Model Rated voltage/frequency ASPA-400 120V~ /60Hz CADR (particulate matter) 233CFM Rated power Rated current Noise Net weight Gross weight Product size Package size 60W 0.85A 55dB 6.3kg 8.4kg 382x200x645mm 475x285x760mm Work environment Temperature:14F-104F(-10-40) humidity:95%RH Real-time display of air quality conditions PM2.5 air quality indicator Wind speed gear Sleep gear PM2.5 value Air quality 0-12 13-35 36-55 55 Excellent Good Medium Poor Green Blue Yellow Red 1 2 Product Components Operating Instructions Structure and name of product components Functions Key state Meanings 4 3 2 1 2 3 4 1 Filter cover Composite filter Host Touch control button and air quality indicator light Standby/shutdown The power button turns white in the power-on state and red in the standby state. Intelligent mode In the intelligent mode, the colors and gears of the PM2.5 air quality indicator light will change with the PM2.5 concentration values (please refer to the table on the first page for the corresponding colors and gears). Manual mode

(gear 1) The PM2.5 air quality indicator light is on for one section in the manual mode Gear 1. The color changes with the PM2.5 concentration values (please refer to the table on the first page for the corresponding colors and gears). Manual mode

(gear 2) The PM2.5 air quality indicator light is on for two section in the manual mode Gear 1. The color changes with the PM2.5 concentration values (please refer to the table on the first page for the corresponding colors and gears). Manual mode

(gear 3) The PM2.5 air quality indicator light is on for three section in the manual mode Gear 1. The color changes with the PM2.5 concentration values (please refer to the table on the first page for the corresponding colors and gears). Reset of filter service life WIFI connection a. The display and reset of filter service life can only be operated on the APP. b. The indicator light of the power key is flashing in red continuously when the filter reaches the end of its service life, until the user replaces and resets the filter on the APP. (Note: When the filter is reset on the APP, the power button still has other functions such as startup & shutdown and shifting gears normally, but the indicator light keeps flashing in red.) a. The machine is powered on for the first time in a standby state after leaving the factory. At the same time, Wi-Fi starts to match the network, waiting for the mobile phone to connect. The key indicator light flashes in red and blue alternately (1HZ).

(Note: The machine enters the state of network matching only when its powered on for the first time). b. In the running/standby state, press and hold the power key for more than 10 seconds and loosen it after hearing the sound of ding-ding-ding. At this moment, it enters the Wi-Fi network matching mode, and the indicator light (RGB LED) flashing in blue and red alternately indicates the network matching state. The light flashes in blue when the network is successfully matched, which returns to the previous running indication state after 5 seconds. If it fails to match the network within 120 seconds, the light flashes in red for 5 seconds and returns to the previous running indication state. The machine can still be powered on/ shut down in the process of network matching. Sleep mode The sleep mode can only be set on the APP. In the sleep mode, the motor runs in the sleep gear, and the air quality indicator light and the power indicator light are off. The switching sequence of corresponding gears:

3 4 Standby/shutdown Intelligent Manual (gear 1) Manual (gear 2) Manual (gear 3) Product Features Integration of multiple functions Instructions for use Precautions for use All filters are attached in the air purifier. Please ensure that the plastic protecting bag outside the filter is removed and installed correctly before use. Efficiently purify PM2.5, smoke, pollen and other particulate pollutants 3 gears of wind speed Timing (operated on the APP) Prompt for replacement the filter (operated on the APP) Configured with three operating modes, namely, manual, intelligent and sleep Wi-Fi connection Monitoring of PM2.5 concentration; display of air quality through different colors of the LED light (the concentration value can be checked on the APP in real time) 3 Threefold purification technology Open the filter cover according to the marking keys on the product. Take out the filter cover when it pops up. Carbon spraying Sponge Initial efficiency filter HEPA filter Initial efficiency filter Intercept hair, fibrous wool, large particles and dander, etc. It can be cleaned regularly with a vacuum cleaner. HEPA filte Efficiently filter out particles as small as 0.3 micron, such as PM2.5, smoke, pollen, dust and other pollutants. Carbon sprayed Sponge The high-quality modified activated carbon sprayed into the sponge can absorb the organic pollutants in the air.

[Note] The carbon sprayed sponge, HEPA filter and initial efficiency filter are combined in the same filter mesh. 5 6 Take out the filter inside the machine. Remove the plastic protecting bag on the filter. Instructions for use Cleaning and Maintenance Cleaning and Maintenance Please unplug the power plug from the power socket before machine maintenance. 1 Clean the machine body:

1Wipe off stains with a soft rag. 2 Wipe off stubborn stains with a soft rag dipped with proper amount of neutral detergent. Note: Please avoid scratching the machine shell with any hard object during maintenance. Please operate according to the manual and avoid damaging any machine part during base disassembly. 2Clean and replace the filter:

1The replacement of filter will be reminded by the built-in program. The filter mesh can also be replaced according to the service life prompt of filter. It can also be replaced in real time through the filter life reset function. 2The vacuum cleaner can be used to clean the deposited dust on the surface of the composite filter to prolong the service life of filter mesh (it is recommended to clean it once every other month and do not wash with water).

*The service life of filter may vary with different environments for using the machine. For example, it will be shortened in smoking areas and areas with pets. Please replace the filter in time when the purification effect becomes worse.

*Please dispose the used waste filter according to the relevant regulations on solid waste. Put the filter without bag back into the machine. Put the filter cover back Start to use 1. Insert the power plug into the 120V power socket; the machine is powered on, and the buzzer makes a ding sound. 2. Power on by touching the power key. 7 8 FAQ & Solutions Failures Possible Causes Solutions The product cannot function normally 1.There are problems in connection. 2.The filter cover is not properly installed. The air cannot be ducted smoothly from the air outlet The machine makes noise while functioning 1.The plastic package of the new filter is not removed. 2. The air outlet of purifier is blocked by foreign matters. 1.The inlet or outlet is blocked by foreign matters. 2.There are foreign matters in the air flue of machine. 1.Check if the plug is plugged into the socket and if the power button is turned on. 2.Reinstall the filter cover. 1. Please remove the plastic package at first. 2. Clean up the foreign matters. 1.Please remove the plastic package first. 2.Clean up the foreign matters. Warranty Warranty Card Customer Name Place of Purchase Product Name Batch No Phone number Date of Purchase Product Model The most frequently asked questions of this product are listed here. If you cannot find the solution to your question, please contact our after-sales service department. Maintenance Date Maintenance Records Remarks Thank you for purchasing and using this product. You can enjoy the following after-sales warranty services with this card as long as you have purchased this product in any authorized shop or online store. You can unconditionally return/exchange the product in case of any quality problem within 7 days of purchase. You can request for maintenance for free (the filter mesh is covered by warranty) in case of any quality problem within 1 year from the date of purchase. Statement: The after-sales warranty will not be provided for the following circumstances. The product is purchased in any unauthorized shop or online store. The product is purchased in any authorized shop or online store, but without a warranty card. The warranty card is filled in incompletely or altered and the contents on the card are inconsistent with the actual product. There is any artificial damage or arbitrary disassembly due to improper use, repair and maintenance beyond the manual. There is any damage caused by force majeure, such as natural disasters. 9 10 FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:?(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2A6AP-ASPA-400

2

Current 2A6AP-ASPA-400 ASPEN APPLIANCEINC CONFORMS TO UL STD.507 CERTIFIED TO CSA STD.C22.2 NO.113 5019454 Label position

ASPEN APPLIANCE INC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A6AP-ASPA-400 Date: 2022-05-05 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Sincerely, Signature:

Name: Chuck Wang Title: Engineer

ASPEN APPLIANCE INC Letter of Authorization Company: ASPEN APPLIANCE INC Address: 115 N RIVERVIEW DRIVE #100 ANAHEIM HILLES,CA 92808,USA Product Name: Air Purifier Model Number: ASPA-400 Trade mark: ASPEN FCC Identifier: 2A6AP-ASPA-400 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Chuck Wang Date: 05.05.2022 Signature of applicant: