FCC ID: 2A6T6-RMT685469810 Remootio

Remootio installation manual Thank you for choosing Remootio!

Make sure you carefully read and understand operator's manual and all other safety instructions before using this product. Before you begin, make sure that the circuit breaker of the gate or garage door is switched off and there is no power in the system. Installation of Remootio 2 requires technical skills. Please always consult with or ask a professional to do the installation. A more detailed installation manual is available on our website:

https://www.remootio.com/blogs/tutorials/remootio-2-installation-manual Step 1 - Unboxing Open the box and remove the Remootio device. The wires, double-sided adhesives and the sensor can be found under the removable paper insert. Step 2 - Read the instruction manual carefully and follow the instructions The printed instruction manual can be found on the back side of the paper insert. Step 3 - Remove the plastic cover Use a cross head screwdriver to remove the screw from the Remootio unit and remove the plastic cover. Step 4 - Connect the control output of the Remootio unit to the appropriate input terminals of your gate or garage door. Based on the type of required control input, there are two types of gates and garage doors:

A single signal (impulse) can open, stop and close the gate or garage door Two separate signals (impulses) needed:

o One signal for opening o and another signal for closing. Single input type:

Different manufacturers name their control inputs differently. The most common terms are as follows:

"CYC", "IMPULSE", "IMP", "KBUTT", "OPERATE", "OSC", "PB", "PP", "SBS", "SS",

"START", "STRT", "SW", "TRG", "WALL BUTTON", "WALL CONTROL". Connect Remootio's control output to the appropriate input terminal of your garage door / gate control board. Please visit https://www.remootio.com/pages/compatibility and enter the make and model of your gate or garage door to search for the correct wiring diagram. Dual input type (separate input for opening and closing):

Connect Remootio's output #1 to the "open" input terminal of your gate or garage door control unit and connect Remootio's output #2 to the "close" input terminal of your gate or garage door control unit. Step 5 - Sensor installation Connect the sensor to terminal 4 of the Remootio 2 unit and use the included adhesives to mount the wireless part of the sensor on the moving part of the gate or garage door in such a way that it is not further than 30mm from the wired part of the sensor when the gate or garage door is closed. For more details and images about the sensor installation, please check our sensor installation tutorial. Step 6 - Connecting an accessory You can connect a push button or a doorbell button to terminal 5 of the Remootio board. Step 7 - Assemble the Remootio unit back together Use a screwdriver to assemble the Remootio unit. Make sure that you do not damage the wires during the assembly. Apply the double sided tape on the back side of Remootio as shown below:

Step 8 - Powering Remootio To power the Remootio 2 unit, simply use the included 5V USB power adapter with the plug type suitable for your country. Step 9 - Download the Remootio app Download the Remootio app from the App Store or from Google Play. Step 10 - Set up the Remootio unit Launch the Remootio app and make sure your smartphone's Bluetooth is enabled. Tap on "Set up new device" and wait until the Remootio app finds the Remootio unit and sets it up. Your new Remootio 2 is now ready to use. Safety instructions Always keep the gate or garage door in sight and far away from people and objects until it is completely closed. NO ONE SHOULD CROSS THE PATH OR STAND IN THE PATH OF THE MOVING GATE OR GARAGE DOOR. The product must only be used with gate or door openers that are equipped with photoelectric sensors. FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Page 1 of 1 FCC ID: 2A6T6-RMT685469810 LABEL AND LOCATION Remootio Model: Smart Garage Door Opener FCC ID: 2A6T6-RMT685469810

(Size: L3.5cm x 3.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Assemblabs Kft Agent Authorization Company: Assemblabs Kft Address: 27b Pipa utca, Dunakeszi, Pest, 2120 Hungary Product Name: Remootio Trade Mark: REMOOTIO Model Number(s): Smart Garage Door Opener FCC ID: 2A6T6-RMT685469810 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-05-16 Name:

Csaba Jozsef Szanto Title:

CEO Company: Assemblabs Kft

Assemblabs Kft Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A6T6-RMT685469810 Date: 2022-05-16 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: Csaba Jozsef Szanto Title: CEO

Assemblabs Kft WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2A6T6-RMT685469810 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Csaba Jozsef Szanto / CEO Phone: 36205722758 Email: 2355433223@qq.com Date: 2022-05-16 Page 1 of 1 Rev.2.0