|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2024-09-26
|
|
various
|
2024-09-23
|
|
various
|
2024-09-05
|
|
various
|
2024-09-04
|
|
various
|
2024-08-19
|
|
various
|
2024-06-17
|
|
various
|
2024-05-23
|
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
|
various
|
FCC Registration Number (FRN) |
0005821988
|
|
various
|
Physical Address |
1F, No. 15, Lide Rd.
|
|
various
|
Beitou, Taipei, N/A
|
|
various
|
Beitou, Taipei, N/A 112
|
|
various
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
|
various
|
c******@telefication.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
MSQ
|
|
various
|
Equipment Product Code |
MT7922A22M
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
J**** Y********
|
|
various
|
Title |
Associate Vice President
|
|
various
|
Telephone Number |
+886-********
|
|
various
|
Fax Number |
+886-********
|
|
various
|
E-mail |
j******@asus.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
Eurofins E&E Wireless Taiwan Co., Ltd.
|
|
various
|
eurofins
|
|
various
|
Bureau Veritas Consumer Products Services (H.K.)
|
|
various
|
Name |
F**** L******
|
|
various
|
K******** L******
|
|
various
|
Physical Address |
No. 140-1, Changan Street, Bade District
|
|
various
|
E-2,no.1,Li Hsin 1st Road, Hsinchu Science Park
|
|
various
|
Taoyuan
|
|
various
|
Taiwan
|
|
various
|
Telephone Number |
88632********
|
|
various
|
03271********
|
|
various
|
03318********
|
|
various
|
Fax Number |
886 3********
|
|
various
|
E-mail |
F******@cpt.eurofinsasia.com
|
|
various
|
k******@bureauveritas.com
|
|
|
app
s
|
Non Technical Contact
|
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services (H.K.)
|
|
various
|
Name |
T**** P****
|
|
various
|
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil.
|
|
various
|
Taiwan
|
|
various
|
Telephone Number |
03264********
|
|
various
|
E-mail |
T******@bureauveritas.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | No |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/23/2025 |
| various | 02/16/2025 |
| various | 12/14/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | DTS - Digital Transmission System |
| various | 6CD - 15E 6 GHz Low Power Dual Client |
| various | 6XD - 15E 6 GHz Low Power Indoor Client |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| various | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| various | No |
| various | Modular Equipment Type | Single Modular Approval |
| various | Purpose / Application is for | Class II Permissive Change |
| various | Class II permissive change or modification of presently authorized equipment |
| various | Change in Identification |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively.
C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest
reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively.
Class II Permissive Change with enabling TAS feature for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.32 W/kg respectively. |
| various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03W/kg, respectively.
Class II Permissive Change with enabling TAS feature for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.38 W/kg respectively. |
| various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively.
C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively.
Class II Permissive Change with enabling TAS feature for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.38 W/kg respectively. |
| various | This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively.
Class II Permissive Change with enabling TAS feature for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.38 W/kg respectively. |
| various | C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively.
This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor.
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.59 W/kg, respectively. |
| various | This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively.
This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor.
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.59 W/kg, respectively. |
| various | C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively.
This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor. |
| various | C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively.
This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor.
SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.59 W/kg, respectively. |
| various | This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths.
Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively.
Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.38 W/kg respectively. |
| various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively.
C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively.
Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W,
FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.35 W/kg respectively. |
| various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively.
Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.38 W/kg respectively. |
| various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively.
C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively.
Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100).
The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.32 W/kg respectively. |
| various | This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80/160 MHz bandwidths.
Power Density and SAR testing was performed to demonstrate RF exposure compliance.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively. |
| various | C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively.
Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively. |
| various | C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance.
SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively.
Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80/160 MHz bandwidths.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| various | C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively.
Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40 MHz bandwidths.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively. |
| various | C2PC: Enabling WiFi 6E 802.11ax (160HE) SISO mode by software.
Power Density and SAR testing was performed to demonstrate RF exposure compliance.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.71 W/kg and 0.97 W/kg, respectively.
C2PC: Enabling WiFi 6E 802.11a SISO mode by software.
C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance.
SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively.
C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations.
SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80/160 MHz bandwidths.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively.
The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Eurofins E&E Wireless Taiwan Co., Ltd.
|
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|
various
|
Name |
F****** L****
|
|
various
|
R**** C********
|
|
various
|
Telephone Number |
+886-********
|
|
various
|
+886-********
|
|
various
|
+886-********
|
|
various
|
Fax Number |
+886-********
|
|
various
|
+886-********
|
|
various
|
E-mail |
F******@cpt.eurofinsasia.com
|
|
various
|
F******@eurofins.com
|
|
various
|
r******@bureauveritas.com
|
|