FCC ID: MSQ-MT7925B22M 2TX 11be (WiFi7) BW160 + BT/BLE Combo Card

E27415 First Edition / January 2026 User Guide MyASUS FAQ Front View NOTE:

The keyboards layout may vary per region or country. The front view may also vary in appearance depending on the Notebook PC model. 1Feature availability varies by market, see aka.ms/WindowsAIFeatures. 14 model Array microphones Webcam shield Camera/IR camera*

Camera indicator Display panel/

Touch screen panel*

Speaker off indicator Microphone off indicator Power button/

Fingerprint sensor*

Keyboard Windows Copilot key1 Touchpad Capital lock indicator

* On selected models 2 16 model Capital lock indicator

* On selected models Array microphones Webcam shield Camera/IR camera*

Camera indicator Display panel Speaker off indicator Microphone off indicator Power button/

Fingerprint sensor*

Numeric keypad Keyboard Windows Copilot key1 Touchpad 3 I/O ports and slots USB 3.2 Gen 1 port HDMI output port LAN port Kensington nano security slot USB 3.2 Gen 2 Type-C/

DisplayPort/Power Delivery combo port USB 3.2 Gen 1 port with charging function Thunderbolt 4/

Power Delivery combo port Headphone/Headset/

Microphone jack The USB 5Gbps Port Logo is a trademark of the USB Implementers Forum, Inc. The USB 10Gbps Port Logo is a trademark of the USB Implementers Forum, Inc. The USB 20Gbps Port Logo is a trademark of the USB Implementers Forum, Inc. The USB 40Gbps Port Logo is a trademark of the USB Implementers Forum, Inc. 4 Getting started IMPORTANT! Do not use this Notebook PC for cryptocurrency mining (consuming a vast amount of electricity and time to gain convertible virtual currency) and/or related activities. NOTE: External devices connected to a USB Type-C port may charge your Notebook PC when your Notebook PC is on battery power while turned off, in hibernate mode, or after resuming from hibernate mode. 1. Charge your Notebook PC A. Connect the AC power cord to the AC/DC adapter. B. Connect the DC power connector into your Notebook PCs power (DC) input port. C. Plug the AC power adapter into a 100V~240V power source. IMPORTANT! Use the bundled power adapter (if available), or a compatible adapter to charge the battery pack and supply power to your Notebook PC. NOTE: The power adapter may vary in appearance, depending on model and your region. 2. Lift to open the display panel 3. Press the power button Charge the Notebook PC for 3 hours before using it in battery mode for the first time. 5 Safety notices WARNING!

Your Notebook PC can get warm to hot while in use or while charging the battery pack. Do not leave your Notebook PC on your lap or near any part of your body to prevent injury from heat. When working on your Notebook PC, do not place it on surfaces that can block the vents. CAUTION!

This Notebook PC should only be used in environments with ambient temperatures between 5C (41F) and 35C (95F). Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating. The power adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. IMPORTANT!

Ensure that your Notebook PC is connected to the power adapter before turning it on for the first time. Always plug the power cord into a wall socket without using any extension cords. For your safety, connect this device to a properly grounded electrical outlet only. When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible. Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU. Power adapter information:

- Input voltage: 100-240Vac

- Input frequency: 50-60Hz

- Rating output current: 4.5A (90W)

- Rating output voltage: 20V WARNING!

Read the following precautions for your Notebook PCs battery:

Only ASUS-authorized technicians should Never attempt to short-circuit your remove the battery inside the device

(for non-removable battery only). The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. Follow the warning labels for your personal safety. Risk of explosion if battery is replaced by an incorrect type. Do not dispose of in fire. Notebook PCs battery. Never attempt to disassemble and reassemble the battery

(for non-removable battery only). Discontinue usage if leakage is found. This battery and its components must be recycled or disposed of properly. Keep the battery and other small components away from children. 6 Avis concernant les batteries remplaables La batterie de lappareil peut prsenter un risque dincendie ou de brlure si celle-ci est retire ou dsassemble. La batterie et ses composants doivent tre recycls de faon approprie. Copyright Information You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, are and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS provides this manual as is without warranty of any kind. Specifications and information contained in this manual are furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. Copyright 2026 ASUSTeK COMPUTER INC. All Rights Reserved. Limitation of Liability Circumstances may arise where because of a default on ASUS part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. Under no circumstances is ASUS liable for any of the following: (1) third-party claims against you for damages; (2) loss of, or damage to, your records or data; or (3) special, incidental, or indirect damages or for any economic consequential damages (including lost profits or savings), even if ASUS, its suppliers or your reseller is informed of their possibility. Service and Support For complete E-Manual version, refer to our multi-language website at:

https://www.asus.com/support/

If you have any problems with your Notebook PC, please visit our website for troubleshooting. MyASUS offers a variety of support features including troubleshooting, products performance optimization, ASUS software integration, and helps you to organize personal desktop and increase storage space. For more details, please visit https://www.asus.com/support/FAQ/1038301/. 7 FCC RF Exposure Information This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid. FCC RF Caution Statement IMPORTANT! Outdoor operations in the 5.15-5.25 GHz band are prohibited. This device has no ad-hoc capability for 5250-5350 and 5470-5725 MHz. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. Ecodesign Directive The European Union announced a framework for the setting of ecodesign requirements for energy-related products (2009/125/EC). Specific implementing measures are aimed at improving environmental performance of specific products or across multiple product types. ASUS provides product information at https://esg.asus.com/Compliance.htm. Vietnam RoHS ASUS products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Cc sn phm ASUS bn ti Vit Nam, vo ngy 23 thng 9 nm2011 tr v sau, u phi p ng cc yu cu ca Thng t 30/2011/TT-BCT ca Vit Nam. 8 ISED 5.925-7.125 GHz Caution Statement RLAN devices:

Devices shall not be used for control of or communications with unmanned aircraft systems. Devices shall not be used on oil platforms. Devices shall not be used on aircraft, except for the low-power indoor access points, indoor subordinate devices, low-power client devices, and very low-power devices operating in the 5925-6425 MHz band, that may be used on large aircraft as defined in the Canadian Aviation Regulations, while flying above 3,048 metres (10,000 feet). Devices shall not be used on automobiles. Devices shall not be used on trains. Devices shall not be used on maritime vessels. Appareils RLAN:

Les dispositifs ne doivent pas tre utiliss pour commander des systmes daronef sans pilote ni pour communiquer avec de tels systmes;

Les dispositifs ne doivent pas tre utiliss sur les plateformes de forage ptrolier;

Les dispositifs ne doivent pas tre utiliss dans les aronefs, lexception des points daccs intrieurs de faible puissance, des dispositifs subordonns intrieurs, des dispositifs clients de faible puissance et des dispositifs de trs faible puissance fonctionnant dans la bande de 5 925 6 425 MHz, qui peuvent tre utiliss dans les gros aronefs tel quil est dfini dans le Rglement de laviation canadien, et ce, lorsquils volent une altitude suprieure 3 048 mtres (10 000 pieds). Les dispositifs ne doivent pas tre utiliss dans les automobiles;

Les dispositifs ne doivent pas tre utiliss dans les trains;

Les dispositifs ne doivent pas tre utiliss sur les navires maritimes. Declaration of Compliance for Product Environmental Regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to https://esg.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with. 9 UL Safety Notices DO NOT use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. DO NOT use the Notebook PC during an electrical storm. There may be a remote risk of electric shock from lightning. DO NOT use the Notebook PC in the vicinity of a gas leak. DO NOT dispose the Notebook PC battery pack in a fire, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to fire or explosion. DO NOT use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer or authorized retailers. Coating Notice IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to https://esg.asus.com/en/Takeback.htm for detailed recycling information in different regions. EPEAT Registered Products The public disclosure of key environmental information for ASUS EPEAT (Electronic Product Environmental Assessment Tool) registered products is available at https://esg.asus.com/en/Ecolabel.htm. More information about EPEAT program and purchase guidance can be found at www.epeat.net. 10 Japan JIS-C-0950 Material Declarations Information on Japan RoHS (JIS-C-0950) chemical disclosures is available on https://esg.asus.com/Compliance.htm. India RoHS This product complies with the India E-Waste (Management) Rules, 2016 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule. EU RoHS This product complies with the EU RoHS Directive. For more details, see https://esg.asus.com/Compliance.htm. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the ISED Specific Absorption Rate (SAR) limits when operated in portable exposure conditions. Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie rayonne du dispositif sans fil est infrieure aux limites dexposition aux radiofrquences dInnovation, Sciences et Dveloppement conomique Canada

(ISED). Le dispositif sans fil doit tre utilis de manire minimiser le potentiel de contact humain pendant le fonctionnement normal. Cet appareil a t valu et montr conforme aux limites de DAS (Dbit dAbsorption Spcifique) de lISED lorsquil est utilis dans des conditions dexposition portables. Wi-Fi Network Notice Wi-Fi 6GHz band frequency connection is available on selected models. The availability and connectivity of the Wi-Fi 6GHz band may vary according to the regulations and certifications of each country/region. 11 Regional notice for Singapore Complies with IMDA Standards DB103778 This ASUS product complies with IMDA Standards. EU REACH and Article 33 Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at https://esg.asus.com/Compliance.htm. FCC 5.925-7.125 GHz Caution Statement Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. The following applies to Very Low Power (VLP) devices: The operation of this device is prohibited on oil platforms and aircraft, except that operation of this device in 5.925-6.425 GHz is permitted in large aircraft while flying above 10,000 feet. Installation on outdoor fixed infrastructure is prohibited. Controlling or communications with unmanned aircraft systems, including drones, is prohibited. USB PD Fast Charging The power delivered by the charger must be between min 80 Watts required by the radio equipment, and max 90 Watts in order to achieve the maximum charging speed. 80 90 W USB PD

*The above is a description of EU regulations (Radio Equipment Directive). For optimal system performance, use a power adapter with an output rating of 90W. Access Advance Patent Notice 12 Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES(B)/NMB(B) Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES(B)/NMB(B) Caution Any devices capable of operating in the band 51505350 MHz shall only be used indoors to reduce the potential for harmful interference to co-channel mobile satellite systems (this requirement does not apply to OEM devices installed in vehicles by vehicle manufacturers). Mise en garde Tout dispositif capable de fonctionner dans la bande de 5150 5350 MHz ne doit tre utilis qu lintrieur des btiments afin de rduire les risques dinterfrences nuisibles avec les systmes mobiles par satellite canaux multiples (cette exigence ne sapplique pas aux dispositifs FEO installs dans les vhicules par les constructeurs automobiles). 13 Radiation Exposure Statement The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration relative lexposition aux radiations Le produit est conforme aux limites dexposition pour les appareils portables RF pour les tats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour une utilisation telle que dcrite dans ce manuel. Le niveau dexposition aux ondes radio peut tre rduit en plaant lappareil aussi loin que possible du corps de lutilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. 14 Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for countries listed in the table below:

AT DE LV NO FI BE IS LI PL SE BG IE LT PT CH CZ IT LU RO HR DK EL HU SI UK(NI) EE ES MT SK FR CY NL TR a. Low Power Indoor (LPI) Wi-Fi 5.945-6.425 GHz devices:

The device is restricted to indoor use only when operating in the 5945 to 6425 MHz frequency range in Austria (AT), Belgium (BE), Bulgaria (BG), Cyprus (CY), Czech Republic (CZ), Estonia (EE), France (FR), Germany (DE), Iceland (IS), Ireland (IE), Latvia

(LV), Luxembourg (LU), Netherlands (NL), Norway (NO), Romania (RO), Slovakia (SK), Slovenia (SI), Spain (ES), Switzerland (CH). b. Very Low Power (VLP) Wi-Fi 5.945-6.425 GHz devices (portable devices):

The device is not permitted to be used on Unmanned Aircraft Systems (UAS) when operating in the 5945 to 6425 MHz frequency range in Austria (AT), Belgium (BE), Bulgaria (BG), Cyprus (CY), Czech Republic (CZ), Estonia (EE), France (FR), Germany (DE), Iceland (IS), Ireland (IE), Latvia (LV), Luxembourg (LU), Netherlands (NL), Norway (NO), Romania (RO), Slovakia (SK), Slovenia (SI), Spain (ES), Switzerland (CH). 15 Simplified UKCA Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for the country listed below:

a. Low Power Indoor (LPI) Wi-Fi 5.945-6.425 GHz devices:

The device is restricted to indoor use only when operating in the 5925 to 6425 MHz frequency range in the UK. b. Very Low Power (VLP) Wi-Fi 5.945-6.425 GHz devices (portable devices):

The device is not permitted to be used on Unmanned Aircraft Systems (UAS) when operating in the 5925 to 6425 MHz frequency range in the UK. 16 CE RED RF Output table (Directive 2014/53/EU) P5406CCA/V5406CCA/P5606CCA/V5606CCA MT7925B22M Function Frequency 2.4 2.4835 GHz 5.15 5.35 GHz WiFi 5.47 5.725 GHz 5.725 5.875 GHz*

5.925 6.425 GHz Bluetooth 2.4 2.4835 GHz Receiver category 1

* Non-Intel modules: 5.725 - 5.85 GHz RTL8852CE Function Frequency 2.4 2.4835 GHz 5.15 5.35 GHz WiFi 5.47 5.725 GHz 5.725 5.875 GHz*

5.925 6.425 GHz Bluetooth 2.4 2.4835 GHz Receiver category 1

* Non-Intel modules: 5.725 - 5.85 GHz Maximum Output Power EIRP (mW)

<100

<200

<200

<25

<200

<100 Maximum Output Power EIRP (mW)

<100

<200

<200

<25

<200

<100 17 UKCA RF Output table

(The Radio Equipment Regulations 2017) P5406CCA/V5406CCA/P5606CCA/V5606CCA MT7925B22M Function Frequency 2.4 2.4835 GHz 5.15 5.35 GHz WiFi 5.47 5.725 GHz 5.725 5.875 GHz*

5.925 6.425 GHz Bluetooth 2.4 2.4835 GHz Receiver category 1

* Non-Intel modules: 5.725 - 5.85 GHz RTL8852CE Function Frequency 2.4 2.4835 GHz 5.15 5.35 GHz WiFi 5.47 5.725 GHz 5.725 5.875 GHz*

5.925 6.425 GHz Bluetooth 2.4 2.4835 GHz Receiver category 1

* Non-Intel modules: 5.725 - 5.85 GHz Maximum Output Power EIRP (mW)

<100

<200

<200

<25

<200

<100 Maximum Output Power EIRP (mW)

<100

<200

<200

<25

<200

<100 18 Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC COMPLIANCE INFORMATION Per FCC Part 2 Section 2.1077 Responsible Party: Asus Computer International Address:

48720 Kato Rd., Fremont, CA 94538 Phone/Fax No:

(510)739-3777/(510)608-4555 hereby declares that the product Product Name : Notebook PC/ASUS ExpertBook Model Number :

P5406CCA, V5406CCA, P5606CCA, V5606CCA compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ver. 180125 19

Laptop Bottom Side Rating Label Contains MT7925B22M BiGkI-) 52 /5.3/6GHzZ FCC ID-MSQ-MT7925B22M #ikBARRICRUET(5) |

IC:3568A-MT7925B22M GHzi# Bin t SHEA

(ccasy1010077 FADERARGE Ba R-C-MD6-MT7925B22m "PIE ee jaaen

[H]020-230243 ie wae) Spa, [1230064020 ERS:

15100-2811C100 0.3 RX4 COFWW Q'EZ 40mm ogmm 40mm 18mm 146 mm+0.2 2ERSae

[1.8mm 20mm 1.8mm

Label location_V2 20250723 C label location 10mm CPU label 28*15mm or 18*18mm PR label 76*55mm 10mm 358.49 mm m m 2 0 2 1 1

. 17.92mm LABEL HERE 34.44mm 125.46mm 10mm 2mm IRIS XEG label 18*18mm energy star label 18*18mm 2mm HDMI label 20.657*6mm 89.7mm Region Label max:55*40mm 8.6mm 10mm D label location SN LABEL:

40*20mm label-1 label-2 label-3 label,2mm 120.69mm 34.48mm

Model:

I n p u t :

P5406CCA

+20V 4.5A, 90W Notebook PC D e s i g n e d b y A S U S Te k C o m p u t e r I n c . EMS HQ006 E187242 MT7925B22M 020-230243 D230064020 A l l r i g h t s r e s e r v e d . A s s e m b l e d i n C h i n a . Contains FCC ID:

MSQ-MT7925B22M and IC:

3568A-MT7925B22M CAN ICES (B) / NMB (B)

Model:

I n p u t :

P5606CCA

+20V 4.5A, 90W Notebook PC D e s i g n e d b y A S U S Te k C o m p u t e r I n c . EMS HQ006 E187242 MT7925B22M 020-230243 D230064020 A l l r i g h t s r e s e r v e d . A s s e m b l e d i n C h i n a . Contains FCC ID:

MSQ-MT7925B22M and IC:

3568A-MT7925B22M CAN ICES (B) / NMB (B)

Model:

I n p u t :

V5406CCA

+20V 4.5A, 90W Notebook PC D e s i g n e d b y A S U S Te k C o m p u t e r I n c . EMS HQ006 E187242 MT7925B22M 020-230243 D230064020 A l l r i g h t s r e s e r v e d . A s s e m b l e d i n C h i n a . Contains FCC ID:

MSQ-MT7925B22M and IC:

3568A-MT7925B22M CAN ICES (B) / NMB (B)

Model:

I n p u t :

V5606CCA

+20V 4.5A, 90W Notebook PC D e s i g n e d b y A S U S Te k C o m p u t e r I n c . EMS HQ006 E187242 MT7925B22M 020-230243 D230064020 A l l r i g h t s r e s e r v e d . A s s e m b l e d i n C h i n a . Contains FCC ID:

MSQ-MT7925B22M and IC:

3568A-MT7925B22M CAN ICES (B) / NMB (B)

Laptop Bottom Side Contains MT7925B22M Bikisl-Y5.2/5.3/6GHz FCC ID:MSQ-MT7925B22M Id BPuRRICIRYES (5. IC:3568A-MT7925B22M GH2#Sitnt sey A

-@ CCAI23Y10100T7 TAD XS LB EA MAC HIET ORARE AT

-C-MD6-MT7925B22M KEY ERAT SH

| [R]020-230243 jin |

C 4 == , [1]D230064020 Teen et). L 15100-2811C100

Certificate Name ASUS IEC H7407I 15105-1376F000 6060B4004301 H7407I RATING LABEL (WO/3C+JP) V1.0 100W(H7407IA) BLK 0.5 RX4 2 3

. 8 m m

0

0

. 4

+20V 5A, 100W CEC ID: H7407I_100W H7407I E187242 CAN ICES (B) / NMB (B) CM-5 ICC 15105-1376F000 40 mm 0.8 mm 40 mm 1.8 mm OPENED WINDOW 40(W)x20(H)mm R0.5x4 OPENED WINDOW 40(W)x20(H)mm R0.5x4 1.9 mm 20 mm 1.9 mm 136.72 mm+0-0.4 6060B4004301-V0-CM-5 15105-1376F000-331950 6mm 5mm 5mm 5mm 4.59mm 5mm 3.5mm 0.5mm 3mm 4mm 7mm 5mm 5mm 5mm XXXXXXX 5mm Dimension Label

+0-0.4mm Label+

0.02mm 1.8 mm 1.5 mm 1.5 mm Paper coremust have the following information :

Please print the following information after the release paper :

IEC PN ASUS PN 6060BXXXXXX XXXXX-XXXXXXXX IEC PN pic ver Vendor code(Name) 6060BXX XXXXX -V0-XXXX Barcode content Show text below 151XX -XXXX XXX X-XXX X ASUS PN Vendor code(Number)

: ASUS PNVender codedash-

m m 4 2 mm 136.72mm m m 8

. 3 2 2 mm 15105-1376F000 6060B4004301 PC G11(0.125mm)+3M7533

+PANTONE 424+

PGD Q2 CM-100-011 MH13013 All color 5 4 3 2 1 20070003665 huangmei 20251107

Certificate Name ASUS IEC J7407I 15105-1376U000 6060B4011301 J7407I RATING LABEL (WO/3C+JP) V1.0 100W(H7407IA) BLK 0.5 RX4 2 3

. 8 m m

0

0

. 4

+20V 5A, 100W CEC ID: H7407I_100W J7407I E187242 CAN ICES (B) / NMB (B) CM-5 ICC 15105-1376U000 40 mm 0.8 mm 40 mm 1.8 mm OPENED WINDOW 40(W)x20(H)mm R0.5x4 OPENED WINDOW 40(W)x20(H)mm R0.5x4 1.9 mm 20 mm 1.9 mm 136.72 mm+0-0.4 6060B4011301-V0-CM-5 15105-1376U000-331950 6mm 5mm 5mm 5mm 4.59mm 5mm 3.5mm 0.5mm 3mm 4mm 7mm 5mm 5mm 5mm XXXXXXX 5mm Dimension Label

+0-0.4mm Label+

0.02mm 1.8 mm 1.5 mm 1.5 mm Paper coremust have the following information :

Please print the following information after the release paper :

IEC PN ASUS PN 6060BXXXXXX XXXXX-XXXXXXXX IEC PN pic ver Vendor code(Name) 6060BXX XXXXX -V0-XXXX Barcode content Show text below 151XX -XXXX XXX X-XXX X ASUS PN Vendor code(Number)

: ASUS PNVender codedash-

m m 4 2 mm 136.72mm m m 8

. 3 2 2 mm 15105-1376U000 6060B4011301 PC G11(0.125mm)+3M7533

+PANTONE 424+

PGD Q2 CM-100-011 MH13013 All color 5 4 3 2 1 20070003708 huangmei 20251125

Covered List Attestation Letter Date: July 20, 2026 Grantee Code: MSQ To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern:

Attestation Sections 2.911(d)(5) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. ASUSTeK COMPUTER INC. (the applicant) further certifies that the equipment does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees (including any integrated Kaspersky software) pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. or Section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (the applicant) certifies that, as of the date of this application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. If you have any questions, please feel free to contact me. Sincerely,

Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

Designation of U.S. Agent for Service of Process Certification Attestation Letter Date: July 20, 2026 Grantee Code: MSQ To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification Section 2.911(d)(7) Information ASUSTeK COMPUTER INC., as required by Section 2.911(d)(7), designates the contact below, located in the United States, for the purpose of acting as the Applicants agent for service of process. The Applicant acknowledges that it must maintain an agent for no less than one year after terminating all marketing and importation, or upon the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges its responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed:

Designated U.S. Agent Signed:

Signed:________________________ Signed:__________________________ Printed name: Jackson Yen Printed name: Gigi Liu Title: Associate Vice President Title: CEO Company Name: ASUSTeK COMPUTER INC. Company Name: ASUS COMPUTER INTERNATIONAL FRN: 0005821988 FRN: 0033432428 Email: [email protected] Email: [email protected] TEL: +886-2-28943447 TEL: 510-3999138 FAX: +886-2-28987364 FAX: 510-6084555 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Address: 48720 Kato Road, Fremont, CA 94538 Taiwan

Class II Permissive Change Letter Date: July 20, 2026 FCC ID: MSQ-MT7925B22M Original Grant Date: February 15, 2024 of equipment class DSS/DTS/NII/6CD and February 10, 2026 of equipment class 6VL. Pursuant to CFR 2.1043, (ASUSTeK COMPUTER INC.) hereby requests a Class II Permissive Change. Modification:

-Change #1:

The subject approved module is integrated in a new host (Product:

Notebook PC, Model: H7407IJ7407I).

-Change #2:

The hardware design of this transmitter that may affect compliance is remained unchanged in this permissive change application.

-Change #3:

The security mechanism according to section II of KDB 594280 D02 is remained unchanged as it reported to the FCC at the initial certification.

-Change #4:

SAR Test report is provided to demonstrate RF exposure Compliance.

-Change #5:

The relevant Verification Testing has been done to ensure the compliance of EMC requirement as KDB 996369 Q12, and the results belong to Class I permissive change as defined in FCC 2.1043 rule.

-Change #6:

Reduce Wi-Fi output power through software controlled by MediaTek that cannot be changed by end user and SAR were evaluated accordingly.

-Change #7:

Adding new antenna(s), that meet FCC Part 15 equivalent-type, please refer antenna report for details. After comparing its gain value with the originally certified one, confirm that it is lower, yet still higher than the minimum antenna gain (-13.91dBi) used in the CBP test. Thank you for your attention to this matter. Sincerely,

Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

Declaration of Authorization Date: July 20, 2026 FCC ID: MSQ-MT7925B22M Attn: Director of Certification I appoint the following agent to act on behalf of ASUSTeK COMPUTER INC. for the preparation of this equipment certification application:

Authorized Agent: Blue Yang, SGS Taiwan Ltd. I certify that the submitted documents properly describe the device for which certification is sought. I further certify that each unit manufactured, imported, or marketed will bear a label identical to that submitted for approval. I acknowledge that all responsibility for complying with the terms and conditions of certification remains with ASUSTeK COMPUTER INC. Agency Agreement Expiration Date: July 20, 2027

Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

Confidentiality Request Letter Date: July 20, 2026 FCC ID: MSQ-MT7925B22M Pursuant to sections 0.457(d) and 0.459 of the FCC Rules, the applicant requests that the information of application be held confidential, in accordance with the table below:

Exhibits Long-Term Confidentiality Short-Term Confidentiality Block Diagrams Operational Description Schematics Parts List Tune-up Info. External Photos Internal Photos Test Setup Photos Users Manual O O O O Long-Term Confidentiality:

The exhibits listed above as Long-Term Confidentiality should be permanently withheld from public inspection due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The exhibits listed above as Short-Term Confidentiality should be withheld from public review for a period of 180 days after the Grant Date of Equipment Authorization, and prior to marketing. Sincerely,

Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

ASUSTeK COMPUTER INC. Date: 5/14/2026 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern:

Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Grantee Code: MSQ Section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. ASUSTeK COMPUTER INC. (the applicant) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. If you have any questions, please feel free to contact me Contact Person / Title: Jackson Yen/Associate Vice President Tel.: +886-2-28943447 E-mail: [email protected] Signature:

ASUSTeK COMPUTER INC. To: Federal Communications Commission Date: 9/8/2025 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7)

(KDB 986446 D01 Covered Equipment) Grantee Code: MSQ ASUSTeK COMPUTER INC. (the applicant) as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicants agent for service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Sincerely yours, Applicant/Grantee US Agent

(Signature) FRN: 0005821988

(Signature) FRN: 0033432428 Company Name: ASUSTeK COMPUTER INC. Company Name: ASUS COMPUTER INTERNATIONAL Contact: Jackson Yen / Associate Vice President Contact: Gigi Liu / President Tel: +886-2-28943447 Email: [email protected] Tel: (510) 608-4530 Email: [email protected] Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Address: 48720 Kato Road, Fremont, CA 94538, United States

ASUSTeK Computer Inc Declaration of Product Modifications DATE : 2025/9/17 To Whom It May Concern:

The purpose of this letter is to request Class II Permissive Change for:

FCC ID: MSQ-MT7925B22M Original Grant Date: 02/15/2024 Pursuant to CFR 2.1043, (ASUSTeK Computer Inc) hereby requests a Class II Permissive Change. Modification:

- Change #1: The subject approved module is integrated in new hosts with TAS feature (product:

Notebook PC, Model: H7606WX, H7606WW, H7606WR, J7606WX, J7606WW, J7606WR, W7606W, W7607W) Model differences: All models are RF electrically identical (including appearance, dimensions, I/O ports, antenna(s) and antenna location), different model names are for marketing purpose. The TAS feature is enabled on WLAN 2.4GHz, 5GHz and Wi-Fi 6E band; and BT does not support.

- Change #2: The hardware design of this transmitter that may affect compliance is remained unchanged in this permissive change application.

- Change #3: The software security information is kept the same as the modules original application.

- Change #4: SAR Test report is provided to demonstrate RF exposure Compliance.

- Change #5: Add two antennas which have the same antenna type as original grant, and each antenna gain is lower than the original application, only different in manufacturer. Please refer to the detail antenna information on page 9 of SRA report.

- Change #6: According to the WIFI 6E test report(RFBARR-WTW-P23040352-7) on the original filing by MTK, the CBP test is based on the minimum antenna gain(-14.46 dBi). The lowest antenna gain of WIFI 6E band is -0.49 dBi for this application, which is not lower than original one. Therefore, the new CBP testing is not required on this app.

- Change #7: Modular SAR approach with 5mm distance has been well evaluated for Modular Approval and when this module integrates in this host, the antenna distance to the human body is 6.2mm, which meets the modular SAR approach (6.2 mm > 5 mm). And therefore, SAR spot check was verified and presented in the SAR Report accordingly. Thank you for your attention in this matter. Best Regards, Signature Name / Title : Jackson Yen / Associate Vice President Tel.: +886-2-28943447 E-mail: [email protected]

ASUSTeK COMPUTER INC. Date: September 8, 2025 Request for Confidentiality Subject: Confidentiality Request for: _FCC ID: MSQ-MT7925B22M and IC: 3568A-MT7925B22M Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Permanent

Permanent *1 Permanent Permanent Permanent Permanent

Permanent *3 Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ASUSTeK COMPUTER INC. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications:

Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: of 180 days after approval. Sincerely, By:

(Signature/Title2) Jackson Yen/ Associate Vice President

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 061224-33a

ASUSTeK COMPUTER INC. Authority to Act as Agent Date: July 7, 2025 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Eurofins E&E Wireless Taiwan Co., Ltd./William Chung is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 12/31/2027 By:

(Signature1) _____ Jackson Yen_____

(Print name) Title:

Associate Vice President On behalf of: ASUSTeK COMPUTER INC.

(Company Name) Telephone:

+886-2-28943447 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

MediaTek Inc. Date: 2025-09-09 FCC ID: MSQ-MT7925B22M Attn: Director of Certification Declaration letter By this letter, MediaTek Inc. hereby declare that Dynamic Power Control and SAR/PD Algorithm is implemented in the MediaTek Inc. modules as described in MediaTek Inc.'s Dynamic Power Control and SAR/PD Algorithm Operational Report USSC257159001/ USSC257159002 provided for KDB Enquiry. SAR Level input for Dynamic Power Control and SAR/PD Algorithm is specific to each host and assessed in relevant Host SAR report. Sincerely yours, ______________________________ Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 E-mail: [email protected]