Classification Confidential Doc Number Date Version June 23, 2007 Draft v0.2 E-Tool for EMP U360 Operating Manual ASUSTeK Computer Inc. Mobile Communication Business Unit R&D Div.1 WriterKevin Hsu & Jim ReviserAden Chang E-Tool for EMP U360 Date 2007/06/01 Draft created Revision History Old Version New Version Description V0.1 V0.2 2007/06/23 Add Get Slot ID and Switch to TP Mode Function 1 ASUSTeK Strictly Confidential 1 Introduction ................................................................................................................................. 3 2 Set Slot ID ................................................................................................................................... 3 3 Switch to TP Mode.................................................................................!
4 Operating Method ....................................................................................................................... 4 E-Tool for EMP U360 Contents 2 ASUSTeK Strictly Confidential 1 Introduction E-Tool for EMP U360 2 Set Slot ID This document describes the operating method by using E-Tool for EMP U360. Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe. Step 2 Choose Function->Slot ID, and click it to Set Slot ID automatically. Step 3 It will show the following dialog , click to continue. 3 ASUSTeK Strictly Confidential Step 4 It will show the following dialog, turn on inactive DUT ,then click Abort to continue. E-Tool for EMP U360 Step 5 If it shows the following dialog , click and please repeat Step2 through to Step4 . Step 6 If the following dialog appeared , it represents Set Slot ID successfully. 4 Operating Method GSM PART Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe. 4 ASUSTeK Strictly Confidential E-Tool for EMP U360 Step 2 Choose Function->U360->GSM, and click GSM to show GSM_U360_form dialog box. Step 3 Choice com port number to communicate with Mustang. 5 ASUSTeK Strictly Confidential E-Tool for EMP U360 Step 4 Choice which tp command to send Set GSM Static TX Set GSM Switched TX 6 ASUSTeK Strictly Confidential E-Tool for EMP U360 Set GSM Static RX Set GSM Switched RX 7 ASUSTeK Strictly Confidential E-Tool for EMP U360 Reset the GSM Radio Result is showed as below 8 ASUSTeK Strictly Confidential E-Tool for EMP U360 WCDMA PART Step 1 The E-Tool V1.0 dialog box will show when you execute P_E_tool.exe. Step 2 Choose Finction->U360->WCDMA, and click WCDMA to show WCDMA_U360_form dialog box. 9 ASUSTeK Strictly Confidential Step 3 Choice com port umber to communicate with Mustang. E-Tool for EMP U360 10 ASUSTeK Strictly Confidential E-Tool for EMP U360 Step 4 Choice Band MODE to send the tp command Set WCDMA TX 11 ASUSTeK Strictly Confidential Set WCDMA RX E-Tool for EMP U360 12 ASUSTeK Strictly Confidential POWER Sense ADC Read E-Tool for EMP U360 Result is showed as below 13 ASUSTeK Strictly Confidential E-Tool for EMP U360 14 ASUSTeK Strictly Confidential Step 5 Reset WCDMA Radio E-Tool for EMP U360 Compliance with FCC rules and regulation:
*The maximum antenna gain allowed for use with this device is 0 dBi. 15 ASUSTeK Strictly Confidential E-Tool for EMP U360
*When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains FCC ID: MSQT 200.
*RF Exposure Warning:
In order to comply with FCC RF Exposure requirements, this device must be installed such that a minimum 20 cm separation distance is maintained between the EUT's antenna(s) and all persons during normal operation. In addition, the antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. OEM integrators may not provide instructions to end-users pertaining to installation or removal of the EUT. 16 ASUSTeK Strictly Confidential