User Guide E14623 15060-xxxxxxxx First Edition / November 2018 ASUS Phone (Mobile Phone) Model: ASUS_X01BDA (ZB631KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus. com/support/. Front features Flash LED indicator Receiver Front camera Proximity sensor and light sensor Touch screen display Side and rear features Microphone Flash Rear camera Fingerprint sensor Volume key Power key Eject hole Nano SIM1, Nano SIM2, Micro SD card slot Microphone Speaker Audio jack Micro USB port Charging your ASUS Phone To charge your ASUS Phone:
1. Connect the USB connector into the power adapters USB port. Connect the other end of the USB cable to your ASUS Phone. 2. 3. Plug the power adapter into a wall socket. 3 2 1 IMPORTANT!
When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. When charging your ASUS Phone through your computer, ensure that you plug the USB cable to your computers USB port. Avoid charging your ASUS Phone in an environment with ambient temperature of above 35oC (95oF). NOTES:
For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury. For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone. The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the USB cable is +5V 2A, 10W. Installing a nano SIM/ microSD card To install a nano SIM/ microSD card:
1. 2. Push the bundled eject pin into the hole on the card slot to eject the tray out. Insert the nano SIM or microSD card into the appropriate slot. 3. Push the tray to close it. CAUTION!
Do not use sharp tools or solvent on your device to avoid scratches on it. Use only a standard Nano SIM card on your ASUS Phone. NOTES:
Both Nano SIM card slots support GSM/GPRS/
EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDV network bands. Both Nano SIM cards can connect to VoLTE 4G calling service. But only one can connect to FDD-LTE, and TD-LTE data service at a time. ASUS phone 2G/3G/4G/LTE band compatibility varies by region. Check compatibility with your local carriers. The microSD card slot supports microSD and microSDXC card formats. Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only. The responsible party within the USA per 47 CFR Part 2.1077(a)(3):
ASUS COMPUTER INTERNATIONAL (America) Address: 48720 Kato Rd., Fremont, CA 94538, USA Telephone: +1-510-739-3777 RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device 0.53 W/Kg @1g(Head) 1.08 W/Kg @1g(Body) 1.20 W/Kg @1g(Hotspot) away from your head and body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided. The highest FCC/IC SAR values for the device (ASUS_ X01BDA) are as follows:
The FCC has granted an Equipment Authorization for this device (ASUS_X01BDA) with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQX01BDA. Canada, Industry Canada (IC) Notices This device complies with Industry Canadas licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux normes CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Son utilisation est sujette aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer dinterfrences nuisibles, et
(2) Cet appareil doit tolrer tout type dinterfrences, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (SAR) limits when installed in specific host products operated in portable exposure conditions. Canadas REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/
sitt/reltel/srch/nwRdSrch.do?lang=eng. Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/
sf08792.html. This equipment should be installed and operated with minimum distance 10 mm between the radiator and your body. Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite dexposition aux frquences radio dIndustrie Canada (IC). Utilisez lappareil sans fil de faon minimiser les contacts humains lors dun fonctionnement normal. Cet appareil t valu et dmontr conforme aux limites de DAS (Dbit dabsorption spcifique) dIC lorsquil est install dans des produits htes particuliers qui fonctionnent dans des conditions dexposition des appareils portables. Ce priphrique est homologu pour lutilisation au Canada. Pour consulter lentre correspondant lappareil dans la liste dquipement radio (REL
- Radio Equipment List) dIndustrie Canada rendez-
vous sur :
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng. Pour des informations supplmentaires concernant lexposition aux ondes radio au Canada, rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/
sf08792.html. Cet appareil doit tre install et utilis avec un minimum de 10 mm de distance entre la source de rayonnement et votre corps. CAN ICES-3(B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device and its antenna(s) must not be co-
located or operated in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products that are marketed in the US/ Canada. Cet appareil et son ou ses antenne(s) ne doivent pas tre situs prs de ou utiliss conjointement avec une autre antenne ou un autre metteur, exception faite des radios intgres qui ont t testes. La fonction de slection de lindicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. The IC ID for this device is 3568A-X01BDA. Lidentifiant Industrie Canada de cet appareil est:
3568A-X01BDA. EU Radio Equipment Directive Compliance Simplified EU Declaration of Conformity Hereby, ASUSTek Computer Inc. declares that the radio equipment ASUS_X01BDA is in compliance with Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/
support/. (Search for ZB631KL) RF Output Table Items Maximum Radio-Frequency Output Power Table Bluetooth BR/EDR (2402~2480 MHz) 12.36 dBm Bluetooth Bluetooth LE (2402~2480 MHz) 2.4GHz 802.11b (2412~2472 MHz) WLAN 2.4GHz 802.11g (2412~2472 MHz) 2.29 dBm 17.46 dBm 14.74 dBm 2.4GHz 802.11n HT20 (2412~2472 MHz) 13.67 dBm GSM GSM 900 GSM 1TX Burst (880~915;
925~960 MHz) GSM 1800 GSM 1TX Burst (1710~1785;
1805~1880 MHz) WCDMA Band I (1920~1980; 2110~2170 MHz) WCDMA WCDMA Band V (824~849; 869~894 MHz) WCDMA Band VIII (880~915; 925~960 MHz) 34.00 dBm 30.88 dBm 24.27 dBm 24.10 dBm 24.16 dBm LTE Band 1 (1920~1980; 2110~2170 MHz) 23.42 dBm LTE Band 3 (1710~1785; 1805~1880 MHz) 21.72 dBm LTE Band 5 (824 ~ 849; 869 ~ 894 MHz) 23.71 dBm LTE LTE Band 7 (2500~2570; 2620~2690 MHz) 23.35 dBm LTE Band 8 (880~915; 925~960 MHz) 23.81 dBm LTE Band 20 (832~862; 791~821 MHz) 23.82 dBm LTE Band 40 (2300~2400 MHz) 23.31dBm NOTE: This RF output power table is for EU member states, the EEA States, the EFTA States and Turkey only. The frequency range and the RF output power may differ from other non-EU countries. RF Exposure Information This ASUS product has been tested and meets applicable European SAR limits. The SAR limit is 2.0 W/kg in countries that set the limit averaged over 10 grams of tissue. The specific maximum SAR values for this device are as follows:
ASUS_X01BDA (ZB631KL) When carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposure requirements. CE Marking Head: 0.347 W/Kg @10g Body: 1.460 W/Kg @10g Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone:
Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance. Safety information CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ASUS Phone care Use your ASUS Phone in an environment with ambient temperatures between 0 C (32 F) and 35 C (95 F). The battery WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm. Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life. Do not remove the non-detachable li-polymer battery as this will void the warranty. Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 C to +35 C. Do not remove and replace the battery with a non-approved battery. Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device. Do not remove and soak the battery in water or any other liquid. Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin. Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects. Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. Do not touch the battery terminals. To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery. NOTES:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The charger Use only the charger supplied with your ASUS Phone. Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 C (32F) and 35 C (95 F). Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. Do not short-circuit the battery terminals with metal items. Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. India E-waste (Management and handling) Rules 2016 This product complies with the India E-Waste
(Management) Rules, 2016 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1%
by weight in homogenous materials and 0.01 %
by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule. India BIS - IS 16333 Notice Language Input: Hindi, English, Tamil Readability: Assamese, Bangla, Bodo(Boro), Dogri, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Maithili, Malayalam, Manipuri(Bangla), Manipuri(Meetei Mayek), Marathi, Nepali, Oriya, Panjabi, Santhali, Sanskrit, Sindhi (Devanagari),Tamil, Telugu, Urdu and English ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for detailed recycling information in different regions. Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product. WARNING Cancer and Reproductive Harm-
www.P65Warnings.ca.gov NOTE: For more legal and e-labelling information, check on your device from Settings > About >
Legal information / Regulatory labels. ASUS Address: 4F, No.150 Li-Te Rd., Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us. Sincerely yours, ASUSTeK COMPUTER INC. Tel: 886228943447 Fax: 886228907698 Support: https://www.asus.com/support/
Copyright 2018 ASUSTeK COMPUTER INC. All Rights Reserved. You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)